Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By headkaze
      Framebuffer patching in Mojave
      Binary patching framebuffers using KextsToPatch in Clover is no longer a viable method in Mojave for Skylake and above. Now you need to use Lilu + WhateverGreen.
       
      Not just for Mojave
      This method of framebuffer patching is not only required for Mojave we recommend it for all previous and future releases of macOS.
       
      Coffee Lake Users
      Please note that the new WhateverGreen will not work with fake Kaby Lake platform-id's. You will need to have either macOS 10.14 Beta 4 (18A336e) or macOS High Sierra 10.13.6 (17G2112). The latter is a special build only available to MacBookPro15,1 or MacBookPro15,2 board id's. You can create a macOS High Sierra 10.13.6 (17G2112) installer by running installinstallmacos.py. (Update: vit9696 added back ability to fake Kaby Lake platform-id's)
       
      Lilu + WhateverGreen
      WhateverGreen is going to replace all the other video patching plugins for Lilu (it currently has merged WhateverGreen, IntelGraphicsFixup, NvidiaGraphicsFixup, Shiki and CoreDisplayFixup). Others will likely follow (such as AppleALC, HibernationFixup and IntelGraphicsDVMTFixup). This is aiming to be the all-in-one solution for video.
       
      Preliminary
      1. Remove:
      - FakePCIID_Intel_HD_Graphics
      - IntelGraphicsFixup
      - NvidiaGraphicsFixup
      - CoreDisplayFixup
      - Shiki
      2. Turn off all graphics injections in Clover:
      - config.plist/Graphics/Inject/ATI=NO
      - config.plist/Graphics/Inject/Intel=NO
      - config.plist/Graphics/Inject/NVidia=NO
      - config.plist/Graphics/ig-platform-id=
      - config.plist/Devices/FakeID/IntelGFX=

      3. Disable DSDT Clover fixes:
      - AddHDMI
      - FixDisplay
      - FixIntelGfx
      - AddIMEI
      4. Disable UseIntelHDMI
      5. Remove boot argument: -disablegfxfirmware
      6. Remove any IGPU and HDMI entries from:
      - config.plist/Devices/Arbitrary
      - config.plist/Devices/Properties
      - config.plist/Devices/AddProperties
      7. Remove any IGPU and HDMI related SSDT and DSDT from:
      - CLOVER/ACPI/patched
      8. Renaming GFX0 -> IGPU
      - WhateverGreen will do this automatically (see caveat below)
      - Be aware that WhateverGreen does not rename all instances of GFX0 -> IGPU but should be okay in most cases
      - You may need to include Clover GFX0 -> IGPU rename for other kexts or ACPI patching that require it
       
      Compile Lilu + WhateverGreen
      Download WhateverGreen. Make sure you place the debug version of Lilu into the root of WhateverGreen before you compile. Install Lilu and WhateverGreen kext's into the usual place. Compile WhateverGreen as debug if you want to view debug output.
       
      Having trouble compiling?
      If you're having trouble compiling you can download the official release binaries or download my (unsupported) build_lilu.sh shell script and run it in a folder to download and build Lilu + WhateverGreen using Xcode automatically. I recommend you try the debug versions first (place them into Clover's EFI/Clover/kexts/Other folder).
       
      Get the device path of your IGPU:
      Download and use the gfxutil tool like so:
      $ ./gfxutil -f IGPU DevicePath = PciRoot(0x0)/Pci(0x2,0x0) ig-platform-id
      For the AAPL,ig-platform-id (AAPL,snb-platform-id for Sandy Bridge) entry Clover requires this value to be in Data format so you need to reverse the bytes. So if you want your platform-id to be 0x3EA50009 first reverse the bytes (0900A53E) then use Xcode's plist editor to add the values to Clover's config.plist.

       
      What ig-platform-id should I use for my system?
      You should choose one that is the closest match to your system. I recommend you do some research on this before choosing one. See post #2 for available options. More info can be found here.
       
      You can determine the generation of your CPU by the first digit after the hyphen.
      Examples:
      - Intel(R) Core(TM) i5-2760QM (Gen 2)
      - Intel(R) Core(TM) i7-5257U CPU @ 2.70GHz (Gen 5)
      - Intel(R) Core(TM) m3-6Y30 (Gen 6)
      - Intel(R) Core(TM) i5-8350U (Gen 8)
       
      Spoofing Intel CPU Gen
      If you need to spoof a different Intel CPU generation you can use the lilucpu=N boot flag. The N refers to the following Intel generations:
      4    SandyBridge 5    IvyBridge 6    Haswell 7    Broadwell 8    Skylake 9    KabyLake 10   CoffeeLake To spoof a CPU you will need to set a valid device-id in your GPU entry in Devices/Properties for the appropriate Intel generation.
       
      Eg. Spoofing Skylake (lilucpu=8 boot flag with device-id=0x16190000), Kaby Lake (lilucpu=9 boot flag with device-id=0x12590000).
       
      Here are some recommended frames:
       
      Gen 2: Sandy Bridge (Intel HD Graphics 2000/3000)
      - S/L/E/AppleIntelSNBGraphicsFB.kext
      - Support started with OS X 10.7.x and ended with macOS 10.13.6
      - Metal support is not available
      - device-id: 0x0102 0x0106 0x010A 0x0112 0x0116 0x0122 0x0126
      - AAPL,snb-platform-id (desktop): 0x00030010 (default)
      - AAPL,snb-platform-id (laptop): 0x00010000 (default)
       
      Gen 3: Ivy Bridge (Intel HD Graphics 2500/4000)
      - S/L/E/AppleIntelFramebufferCapri.kext
      - Support started with OS X 10.8.x
      - device-id: 0x0152 0x0156 0x0162 0x0166
      - AAPL,ig-platform-id (desktop): 0x0166000A (default), 0x01620005
      - AAPL,ig-platform-id (laptop): 0x01660003 (default), 0x01660009, 0x01660004
       
      Gen 4: Haswell (Intel HD Graphics 4200-5200)
      - S/L/E/AppleIntelFramebufferAzul.kext
      - Support started with OS X 10.9.x
      - device-id: 0x0D26 0x0A26 0x0A2E 0x0D22 0x0412
      - AAPL,ig-platform-id (desktop): 0x0D220003 (default)
      - AAPL,ig-platform-id (laptop): 0x0A160000 (default), 0x0A260005 (recommended)
       
      Gen 5: Broadwell (Intel HD Graphics 5300-6300)
      - S/L/E/AppleIntelBDWGraphicsFramebuffer.kext
      - Support started with OS X 10.10.2
      - device-id: 0x0BD1 0x0BD2 0x0BD3 0x1606 0x160E 0x1616 0x161E 0x1626 0x1622 0x1612 0x162B
      - AAPL,ig-platform-id (desktop): 0x16220007 (default)
      - AAPL,ig-platform-id (laptop): 0x16260006 (default)
       
      Gen 6: Skylake (Intel HD Graphics 510-580)
      - S/L/E/AppleIntelSKLGraphicsFramebuffer.kext
      - Support started with OS X 10.11.4
      - device-id: 0x1916 0x191E 0x1926 0x1927 0x1912 0x1932 0x1902 0x1917 0x193B 0x191B
      - AAPL,ig-platform-id (desktop): 0x19120000 (default)
      - AAPL,ig-platform-id (laptop): 0x19160000 (default)
       
      Gen 7: Kaby Lake (Intel HD Graphics 610-650)
      - S/L/E/AppleIntelKBLGraphicsFramebuffer.kext
      - Support started with macOS 10.12.6
      - device-id: 0x5912 0x5916 0x591B 0x591C 0x591E 0x5926 0x5927 0x5923 0x87C0
      - AAPL,ig-platform-id (desktop): 0x59160000 (default)
      - AAPL,ig-platform-id (laptop): 0x591B0000 (default)
       
      Gen 8: Coffee Lake (Intel UHD Graphics 630)
      - S/L/E/AppleIntelCFLGraphicsFramebuffer.kext
      - Support started with macOS 10.13.6 (17G2112) / 10.14 beta 4 (18A336e)
      - device-id: 0x3E9B 0x3EA5 0x3E92 0x3E91
      - AAPL,ig-platform-id (desktop): 0x3EA50000 (default), 0x3E9B0007 (recommended)
      - AAPL,ig-platform-id (laptop): 0x3EA50009 (default)
       
      Framebuffer Patching
      WhateverGreen does most of the work automatically for you and in most cases you do not need any extra Framebuffer Patching. At the minimum though you should choose an ig-platform-id suitable for your system and place it in config.plist/Devices/Properties like this:

      Here are some reasons why you might need extra Framebuffer Patching:
      - Setting DVMT for those who can't set it above 32 MB in BIOS (framebuffer-stolenmem / framebuffer-fbmem)
      - Setting higher VRAM for 4K users who experience graphical glitches (framebuffer-unifiedmem)
      - Disabling eGPU (disable-external-gpu)
      - Enable pixel clock patch for 4K support (enable-hdmi20)
      - Disabling connectors to enable sleep (framebuffer-pipecount / framebuffer-portcount / framebuffer-conX-type=-1)
      - Removing CNConnectorAlwaysConnected flag for eDP laptop screens on < 10.13.6 (framebuffer-con0-flags=0x00000090)
      - Changing connector types to match your systems ports (framebuffer-conX-type)
       
      Framebuffer Patching Types
      We have three different types of patches:
       
      1. Arbitrary (Recommended)
      framebuffer-patch-enable (required to enable below) framebuffer-framebufferid (optional; defaults to current platform-id) (all below are optional) framebuffer-mobile framebuffer-pipecount framebuffer-portcount framebuffer-memorycount framebuffer-stolenmem framebuffer-fbmem framebuffer-unifiedmem framebuffer-cursormem (Haswell only) framebuffer-camellia framebuffer-flags framebuffer-conX-enable (required to enable below) framebuffer-conX-index framebuffer-conX-busid framebuffer-conX-pipe framebuffer-conX-type framebuffer-conX-flags 2. All Data
      framebuffer-conX-enable (required to enable below) framebuffer-conX-alldata 3. Find / Replace
      framebuffer-patchX-enable (required to enable below) framebuffer-patchX-framebufferid (optional; defaults to current platform-id) framebuffer-patchX-find framebuffer-patchX-replace framebuffer-patchX-count (optional; defaults to 1) You should place your patches in config.plist/Devices/Properties in Clover config.plist.
       
      Here are some example patches:
      - 32MB BIOS, 19MB stolen (framebuffer) 9MB fbmem (cursor) 2048MB unifiedmem (vram)

       
      - Pipe / Port Count 3 to 2
      - Connector 1 DP to HDMI
      - Connector 2 Disable

       
      Here is an example of the All Data method:

       
      Here is an example of the Find / Replace method:

       
      Framebuffer Dumps
      There are two ways to dump your framebuffer data (both require WhateverGreen + Lilu debug versions):
       
      1. Using -igfxdump boot flag to dump IGPU framebuffer kext to /AppleIntelFramebuffer_X_Y (root of your boot drive)
       
      There are several ways of reading this dump:
      - Using 010 Editor along with the IntelFramebuffer.bt template
      - Using Hackintool File->Open menu
       
      2. Using -igfxfbdump boot flag to dump native and patched framebuffer table to ioreg at IOService:/IOResources/WhateverGreen
       
      There are several ways of reading this dump:
      - Using dump_platformlist.sh shell script
      - Using Hackintool File->Import->IOReg Dump menu
       
      3. Using Hackintool Framebuffer->macOS 10.14 menu
       
      Debug Output
      To get debug output from Lilu use the -liludbgall liludump=60 boot flags. You will need to compile Lilu and WhateverGreen as debug for both of these flags to work. Log files should be located at /var/log/Lilu_*.
       
      To view debug paste the following into Terminal (weglog.txt will output to your home directory):
      log show --predicate 'process == "kernel" AND (eventMessage CONTAINS "WhateverGreen" OR eventMessage CONTAINS "Lilu")' --style syslog --source --last boot >weglog.txt Getting Help

      To help the users of this forum diagnose issues with your configuration please generate a Lilu debug log and then run gen_debug.sh to generate a folder of debug files you can attach to a forum post requesting help.

      Credits
      - vit9696 and lvs1974 for WhateverGreen (Full Credits) and Lilu (Full Credits)
      - Andrey1970 for his guide on applelife.ru
      - RehabMan for all data patching method, ioreg framebuffer dump and other contributions
       


    • By fusion71au
      Making a High Sierra USB Installer Entirely From Scratch in Windows
      This is a proof of concept tutorial, to show it's possible to create a vanilla High Sierra installer, entirely from scratch, in Windows (even without App Store downloaded "Install macOS High Sierra.app" from a real Mac ).  @PikeRAlpha's link to Apple's Software Catalog provides us with all the URLs necessary to download the needed files directly from Apple instead of some dubious source from the internet...
       

      Pre-Requisites
      8GB or larger USB drive Boot Disk Utility v2.1.2017rev021b from @CVAD TransMac (free 15 day trial) Paragon Hard Disk Manager Free Download Installer Files Directly from Apple
      1)  Browse Apple's Regular Software Catalog and find the URLs to download the following 6 installer files...
      BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist (Hint - search page for "InstallESD" to find its URL and others nearby)

      to a folder named "SharedSupport" on your Windows NTFS drive.  A browser download manager (eg Chrono for Chrome, dTA for FireFox) is handy since InstallESD is >4GB ---> allows you to pause/resume interrupted download...

      2)  Rename InstallESDDmg.pkg to InstallESD.dmg
      3)  Edit InstallInfo.plist with WordPad/text editor to remove the chunklistURL and chunklistid keys for InstallESD, and renaming it from InstallESDDmg.pkg to InstallESD.dmg (example of edited file attached to this post)...
      Note:  You can verify the SHA1 checksum of your InstallESD.dmg and BaseSystem.dmg with the correct ones at this website.
      Boot Disk Utility to format the Installer USB and Restore OS X Base System HFS partition
      1.  Format USB with BDU & latest Clover ---> creates boot files in CLOVER partition + second FAT partition
      2.  Extract 4.hfs from \SharedSupport\BaseSystem.dmg with BDU --> save to it's local folder
      3.  Restore 4.hfs to USB second partition with BDU --->  2nd partition becomes bootable "OS X Base System"
      Paragon Hard Disk Manager to extend HFS Partition to its Full Extent
      Open Paragon Partition Manager Free and resize the second partition of the USB drive to the full size allowed.  Don't forget to apply the changes at the end...
      Transmac to Copy "SharedSupport" folder to OS X Base System
      1.  Open the TransMac program and navigate to the HFS+ Volume/Install macOS High Sierra.app/Contents folder.  Right click anywhere in the empty space on the RHS pane and select "Copy Here"...
      2.  In the next stage, select the "SharedSupport" folder we created above as the "Files and Folders to be copied to the Mac Volume"...
      Clover Settings
      Clover configuration is required now.  The default config.plist (in the Clover FAT32 partition of the USB) maybe sufficient to boot your machine if you’re lucky.  If not, look at the Clover Wiki, Clover Instructions and Clover Configuration Thread for pointers and edit /EFI/Clover/config.plist accordingly with Wordpad or Notepad.
      The location of the important configuration files for Clover are summarized below
      config.plist--->EFI/CLOVER folder DSDT.aml with or without SSDT.aml--->EFI/CLOVER/ACPI/patched (don't need one if your DSDT is auto patched by Clover in config.plist) Kexts eg FakeSMC, NullCPUPowerManagement --->EFI/CLOVER/kexts/<osx version> or /Other. NB BootDiskUtility by default already has FakeSMC.kext installed here.  You may need to add VoodooPS2Controller for your laptop keyboard/trackpad to work. If UEFI booting, you will most likely need one of the OsxAptioFixDrv-64 drivers copied from /EFI/CLOVER/drivers-off/drivers64UEFI to /EFI/CLOVER/drivers64UEFI. If you want to use the installer to run High Sierra in Windows on VMware, you can follow my guide to set up the Virtual Machine and replace Clover's default config with EFI_Clover for VMware (which is compatible to run in VMware).  In the screenshots below, I have attached the USB Installer (in this case PhysicalDrive7) to my macOS Virtual Machine.  Reboot the system to the USB installer to install High Sierra ...
      What happens if we don't have access to TransMac or Paragon Hard Disk Manager?
      Not a problem, as long as we get "OS X Base System" bootable, we can launch terminal from the Utilities Menu to copy the SharedSupport folder over to the Installer app.  In essence, we will build the full installer app = 5GB+ on the target HD eg "Macintosh HD", by copying both the "small" installer app = 15MB (on "OS X Base System") and the SharedSupport folder from the NTFS volume (mounted in this example on /Volumes/DATA)...
      -bash-3.2# cd / -bash-3.2# cp -R Install\ macOS\ High\ Sierra.app /Volumes/Macintosh\ HD/ -bash-3.2# cp -R /Volumes/DATA/SharedSupport /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/  
      ...then start installation with the startosinstall utility...
      -bash-3.2# /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app/Contents/Resources/startosinstall --volume /Volumes/Macintosh\ HD --converttoapfs NO --applicationpath /Volumes/Macintosh\ HD/Install\ macOS\ High\ Sierra.app  
      The above steps can be automated with the attached "startosinstall.command" script, which will assemble "Install macOS High Sierra.app" on "Macintosh HD" and launch the startosinstall utility targeting the "Macintosh HD" volume.  Copy/download to "Macintosh HD", then run in terminal (after attaching DATA USB with /Shared Support folder)...
      cd "/Volumes/Macintosh HD" chmod +x startosinstall.command ./startosinstall.command Updated Download Links for macOS Mojave 10.14.2_18C54
      Browse Apple's Regular Software Catalog and find the URLs to download the following 6 installer files...
      BaseSystem.dmg BaseSystem.chunklist InstallInfo.plist InstallESDDmg.pkg AppleDiagnostics.dmg AppleDiagnostics.chunklist  
      Note: In Mojave, Apple has removed the --converttoapfs NO and --applicationpath arguments from the startosinstall utility....
       
      eg to use startosinstall for the above section "What happens if we don't have access to TransMac or Paragon Hard Disk Manager?", the syntax is now
      -bash-3.2# /Volumes/Macintosh\ HD/Install\ macOS\ Mojave.app/Contents/Resources/startosinstall --volume /Volumes/Macintosh\ HD  
      This basically means that for Mojave, the default installation will always convert the target volume to the apfs file system.
       
       
      startosinstall.command.zip
      InstallInfo.plist_edited_10.13.6.zip
      InstallInfo.plist_edited_10.14.2.zip
       
       
    • By spec3
      Hi,
       
      is there a way to download 10.14.1 now? , i need to downgrade from 10.14.2..
       
      I would like to reinstall from zero, because i have problem of compatibility with some apps with 10.14.2.
       
      thanks
    • By Yuvraj Harod
      Hey there,
      Hope everything is fine with you admin
      I was installing Mojave and m constantly facing one single error please help me out with this
      An error occurred while running scripts from the package "OSInstall.prescript.pkg"
      quite installer to restart your computer 
      IDK why is this happening 
      My Notebook's Specs:
      i3 3110M 2.40ghz
      4GB Ram ddr3
      GTX 720M
      1TB hdd
       
      PS; I've already converted HDD into GUID Partition 
       
      I'm waiting for a reply dear
      hope to hear from you soon!
    • By 1Ale1
      Ciao a tutti, ultimamente ho deciso di mettermi al lavoro e fare un investimento a lungo termine comprando un fisso che ho assemblato pezzo dopo pezzo leggendo numerosi forum per essere bene informato sul miglior hardware che potessi ottenere per un Hackintosh ottimizzando al meglio i costi: ho finito così per comprare:
       
      Hardware:
       
       
      -Motherboard: Gigabyte Z390 Aorus Pro (Rev 1.0)
      -CPU: Intel i7 9700k raffreddato a liquido (CoffeLake)
      -GPU: AMD Radeon RX580 (avendo letto le eccellenti prestazioni a ottimo prezzo per MacOS)
      -RAM: 32GB DDR4 Crucial Ballistix Sport LT (4x8GB 3000MHz)
      -NVMe SSD Samsung 970 Evo 250GB M.2 dedicato solo a MacOS, nel secondo slot della Mobo M.2 avrei poi messo un Western Digital Blue da 250GB con Windows 10 su metà disco e per l'altra metà il Debian che sto utilizzando adesso
       
       
      Poi mi sono messo subito al lavoro per cercare di far partire questo benedetto MacOs su una macchina non ufficiale, ho tovato quindi questa guida su GitHub che era molto simile alla mia configurazione:
       
      https://github.com/cmer/gigabyte-z390-aorus-master-hackintosh/blob/master/STEP_BY_STEP.md
       
      Dopo aver fatto partire una macchina virtuale per configurare la USB come comunemente viene fatto, scaricando l'applicazione e facendo il "burn/copia dei file" di macOS su pennetta esterna rendendola bootabile solamente da un pc ufficiale mac, sono passato alla configurazione di Clover (l'EFI installer, cartella che allegherò qui sotto, ma prima leggete il problema): Ho messo i driver necessari, mettendo quelli che lui menzionava sotto la sezione "building the usb installer"
       
      https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/building-the-usb-installer
       
       
      Install Clover for UEFI booting only
      Install Clover to the ESP
      Under Drivers64UEFI:
      AptioMemoryFix (the new hotness that includes NVRAM fixes, as well as better memory management) (che poi ho dovuto rimuovere, leggi sezione https://github.com/cmer/gigabyte-z390-aorus-master-hackintosh/blob/master/STEP_BY_STEP.md#fixing-kernel-panics-at-rebootshutdown)
      VBoxHfs-64.efi (or HFSPlus.efi if available) - one of these is required for Clover to see and boot HFS+ volumes. If you see the option to enable it in the installer, make sure it's selected - if you don't see it in the installer, verify that one of them exists in the EFI -> CLOVER -> drivers64UEFI folder
      ApfsDriverLoader - (Available in Dids' Clover builds - or here) this allows Clover to see and boot from APFS volumes by loading apfs.efi from ApfsContainer located on block device (if using AptioMemoryFix as well, requires R21 or newer)
       
      applicando piccole modifiche a causa di un errore già riportato da questa persona che ha scritto la guida di GitHub di sostituire AptioMemoryFix-64 (dalla cartella EFI/EFI/CLOVER/driver64UEFI) con OsxAptioFix2Drv-free2000, questa infatti riportava  quanto segue dopo aver detto di aver sostituito AptioMemoryFix-64.efi con OsxaptioFix2Drv-free2000:
       
      "I am told that there are downsides (that I don't fully understand yet) to using OsxAptioFix2Drv-free2000, so do this at your own risk."
       
      Ho configurato poi il config.plist
       
      Come diceva lui, partendo da questo file: https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/config.plist-per-hardware/coffee-lake e applicando le modifiche che sotto ha descritto, del tipo:
       
      Open coffeelake_sample_config.plist with Clover Configurator (right click → Open With → Clover Configurator)   In SMBIOS: - Click the button with an up/down arrow (middle right). Chose iMac18,3. This is important since we'll be connecting our monitor to the RX580. The HDMI port on our motherboard is NOT yet working for Hackintoshes. - Make sure the serial number generated is an iMac (mid-2017) by clicking Model Lookup. - Ensure that Check Coverage reports that the serial is NOT valid. You don't want to use somebody else's serial number. - While you're here, copy your Board Serial Number to your clipboard. You'll need it soon.
      In Rt Variables: Paste your Board Serial Number in the MLB field. Set CsrActiveConfig to 0x0 which enables SIP for extra security. This should work just fine for a Vanilla Hackintosh install and is how genuine Macs ship. In Boot: Change the Custom Flags to: shikigva=40 uia_exclude=HS14 (this disables onboard Bluetooth since we'll be using an external Broadcom Wi-Fi/Bluetooth adapter) In ACPI: Click List of Patches and enable the following: Change GFX0 to IGPU In Devices: Set Inject to 16. Now to enable our headless iGPU, we need to fake the device id. To do so, Click Properties, select PciRoot(0x0)/Pci(0x2,0x0). Then, click the + button to add a property. Add the following: Property Key: device-id Property Value: 923E0000 Value Type: DATA Click the Export Configuration button (bottom left), then Save As config.plist. Copy your newly generated config.plist to /EFI/CLOVER/ on your bootable USB key.  
      Impostazioni BIOS
       
      E avendo settato nel BIOS le impostazioni che questa perona configliava all'inizio della guida,                       (N.B. la mia versione di Bios è l'ultima, F7 https://www.gigabyte.com/Motherboard/Z390-AORUS-PRO-rev-10#support-dl-bios) (a quanto risulta il giorno 7.01.2019)
       
      Load Optimized Default Settings Peripherals → USB Configuration → XHCI Hand-off : Enabled Chipset → Internal Graphics : Enabled (important for Quicklook/Preview) Please note that we will be using our internal GPU in headless mode only and this guide assumes that. This is how an iMac18,3 (what we're basing our build on) behaves. That's it! I literally didn't change anything else and it just worked.
       
      Anche per me ha funzionato. Comunque lui riportava ulteriori settaggi, aggiungendo:
       
      However, these are settings that are generally recommended. Your mileage may vary:
       
      BIOS → Fast Boot : Disabled BIOS → LAN PXE Boot Option ROM : Disabled BIOS → Storage Boot Option Control : UEFI Peripherals → Trusted Computing → Security Device Support : Disable Peripherals → Network Stack Configuration → Network Stack : Disabled Peripherals → USB Configuration → Legacy USB Support : Auto Peripherals → USB Configuration → XHCI Hand-off : Enabled (Extremely important) () Chipset → Vt-d : Disabled (non l'ho messo e parte a volte, quindi penso che se parte non ha una importanza così rilevante) Chipset → Wake on LAN Enable : Disabled (era già così) Chipset → IOAPIC 24-119 Entries : Enabled  
       
      Il sistema è partito e soltanto alcune volte dava il seguente errore:
       
      Error allocating 0x11996pages at 0x000000001d453000 alloc type 2
      Couldn't allocate runtime area.
       
      Credo che sia questo piccolo problema: la NVRAM.
      Non riesco bene a capire dove cercare per sapere con esattezza se è supportato nativamente o meno. Ho cercato di informarmi, voi potreste dirmi se è vero?
      Premendo poi Ctrl+Alt+Canc riavviavo e selezionando da Clover l'NVMe interno partiva senza dare questo errore, per cui il kernel non trova spazio perché la memoria Non Volatile ad accesso Randomico è troppo frammentata, come
       
      Questa guida riportava:
       
      Primo post:
      https://nickwoodhams.com/x99-hackintosh-solving-osxaptiofixdrv-allocaterelocblock-can-not-allocate-relocation-block/
       
      Post aggiornato nel 2016:
      https://nickwoodhams.com/x99-hackintosh-osxaptiofixdrv-allocaterelocblock-error-update/
       
      Mi sono letto tutto e ho capito che lui applicava anche delle modifiche al file: "Changes to OsxLowMemFixDrv-64.efi were simply editing 0x10000000 to 0x20000000."
       
      Ho quindi seguito il suo consiglio di mettere OsxAptiofix Emuvariable 64 e Test2-2016.efi (che lui aveva creato) ma il problema sembrava persistere, più raramente
       
      La mia cartella driver64UEFI di ora
       
      Dopo aver trovato una strada senza soluzoni anche lì mi sono rivolto a degli amici, e di questo errore ne ho parlato anche con utenti del gruppo Telegram "Hackintosh Italia" che sono stati e ancora sono molto gentili ad aiutarmi spiegandomi che si tratta di un problema di NVRAM, che nel mio caso, avendo installato questi .efi file nella cartella EFI/EFI/CLOVER/driver64UEFI (che ancora è cosi attualmente, oscillando tra couldnt allocate runtime area (anche dopo aver definitivamente staccato la corrente dopo aver spento il PC per capire se poteva aiutare) e a volta anche nessun errore)
       
       
      -ApfsDriverLoader-64.efi
      -DataHubDxe-64.efi
      -EmuVariableUefi-64.efi
      -FSInject-64.efi
      -HFSPlus-64.efi
      -NTFS-64.efi
      -NvmExpressDxe-64.efi
      -OsxAptioFix2Drv-free2000.efi
      -PartitionDxe-64.efi
      -UsbKbDxe-64.efi
       
      In più ho aggiunto gli RC Scripts (come mi è stato consigliato dai membri del gruppo telegram) sul disco interno in cui mac è installato.
       
      Togliendo quindi qualsiasi test.efi o test2- 2016.efi ed ascoltando chi ne sapeva di più. Ora mi trovo a dover affrontare diverse volte questo errore dovendo riavviare per risolverlo, cosa che mi fa dedurre che Osxaptiofix2 2000 sia un po' instabile nel pulire la NVRAM prima di avviare la macchina/ allo spegnimento di questa.
      Questo problema di couldnt allocate runtime area persiste sebbene prema F12 dalla schermata di Boot di Clover.
       
      Vi chiedo gentilmente una mano, inoltre mi è stato detto che siccome il sistema da:
       
      -"3.6 GHz unknown nella sezione "Processor"
      -non riconosce la RAM con un Vendor ID? (del tipo Ballistix dovrebbe essere?)
       
       
      Serve di rivedere il config.plist che ho creato, rivedere i DSDT e gli efi? sono a posto?, (mi hanno detto che gengik84 fare, ma accolgo volentieri l'aiuto di tutti) ,  vi mando una foto della schermata di "About this Mac" e della EFI in allegato. Quello che farò sicuramente mentre attendo vostre risposte è il downgrade da 10.14.3 Beta a 10.14.2, l'upgrade l'ho fatto pensando che magari avrei aggiustato qualcosa, ma l'errore come lo dava prima lo dà ora, non credo che questo cambi molto le cose in gioco. Comunque è meglio non essere in Beta per aggiustare gli errori.
       
       
      Grazie mille per essere arrivato a leggere fino a questo punto, lo apprezzo molto.
       
       
      Per la cartella EFI: sono 22MB zippati, in allegato non entrano...
       
      https://drive.google.com/open?id=106jXkDB0Id045lzIIzAn9F5MwnzWFv3X
       

       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       

       
       
       
       



×