Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By fighttoby
      I have tried to install clover via no UEFI legacy mode (and with UEFI method) using the method here (http://www.tonymacx86.com/yosemite-desktop-guides/144426-how-install-os-x-yosemite-using-clover.html)
      both times I can get to just past the clover boot screen and it freezes after that.
      I have verbose (-v) selected in boot options: On the non-UEFI install then it hangs on:
      "Waiting on <dict ID="0"><key>IOProviderClass</key>...."
       
      I have had a lot of issues with trying to get the installer working and many different things that had to be disabled but now it just gets to here and stops. Some times it will glitch out on this screen and give me a the circle with the line through it and text garbage around it where the text in the pictures are.
       
      Need help please.
       
      This is the laptop im using the specs are the same nothing has changed.
      https://www.asus.com/Laptops/ASUS_VivoBook_X202E/


      config.plist
    • By mossy
      so im trying to install El Capitan on my old laptop but im having mouse issues i tried all the kext and looked online 
       
      this is TUT i followed 
       
      https://osxlatitude.com/forums/topic/8645-dell-latitude-d630-with-core2duo-and-nvidia-quadro-nvs-135m-el-capitansierra/
       
      ASUS K50IN T6500
    • By dbx103
      I Have Full and meta display, I can't control display.
      debug_27160.zip
    • By maxneko
      TLDR: I've gotten myself up a creek without even a working keyboard and mouse. 
       
      My setup
       
      Asus X99 Deluxe motherboard
      Dual Asus Radeon R9 280x GPU's
      i7 5930K CPU
      G.Skill - Ripjaws Series 32 GB (4 x 8 GB) DDR4-2400 Memory
      Highpoint 2721 RAID controller + 4 hard drives
      EVO 850 Pro SSD
      Mojave 10.14.4
      Profile: MacPro6,1
       
      I had installed Mojave and had set it up to boot directly into my user account with no need for a password. Both Clover and IORegistryExplorer were set as log-in items. This was because I was working on activating my SS ports. The X99 Deluxe USB ports are set up as follows:
       
      USB3_E1 to USB3_E10 at the rear (Asmedia controller)
      USB_13 & USB_14 at the rear (Intel)
      USB1112 & USB1314 (headers on the motherboard)
      USB3_12 & USB3_34 (front)
       
      This adds up to potentially 34 ports, far more than I need. I had three patches enabled to remove the 15 port limit but they weren't doing the trick. So I disabled the ten USB3 ports on the rear that are subject to the Asmedia controller in BIOS. I also disabled the Asmedia USB3 controller. All I really need are the four USB3 ports on the front panel, along with one of the motherboard USB2 headers. This should have gotten me down to under 15 ports. One SS port appeared in IORegistryExplorer but I couldn't locate it when I tested every active port.
       
      I'm not sure what I did but everything went sideways. I found that I was booting into Mojave, Clover and IORegistryExplorer were launching but the mouse cursor was frozen in the corner and the keyboard was dead. Moving the keyboard and mouse to different ports didn't help. Meanwhile the OS was giving me a message about looking for a BT keyboard which I don't have. 
       
      I've tried the following to no avail:
       
      -- reinstalling Mojave
      -- various combinations of USBInjectAll.kext, XHCI-X99-injector.kext, X99_Injector USB 3.kext, and GenericUSBXHCI.kext
      -- resetting the CMOS
      -- enabling and disabling the ten Asmedia USB3 ports on the rear
      -- enabling and disabling the port limit patches below:
       

       

       
      I haven't reflashed my BIOS which is something I do when starting from scratch, although I don't see why it would matter. I'm open to that, burning incense, whatever will help.  In the end, I need at least 1-2 working USB3 ports. But right now, I just need to get my keyboard and mouse working again. I've been going in circles on this all day and could really use some good ideas.
       
      Thanks so much.
       
      Max
       
      config copy.plist
×