Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

5,377 posts in this topic

Recommended Posts

Advertisement
55 minutes ago, Babiloe said:

Sent me files

http://www40.zippyshare.com/v/LCJKwAAF/file.html

 

Optimus type MX150 Nvidia and UHD 620 5917 not 5916...

So I think I can run 620 intel only as rehab man told. dO I need change dsdt or IGPu dsl to 5917 instead of 5916? 

http://www83.zippyshare.com/v/rjEL3O5F/file.html

VoodooI2CELAN.kext.zip

what ur audio codec?

41 minutes ago, petr said:

installation finally started but after HDD SETUP AND MAC HIGH SIERRA INSTALLATION ON, it will write recovery server could not be contacte .... 

Check procedure, is a two stages installation

22 minutes ago, YoYelloW said:

Tried all teh combinations from there, no luck :s you got any idea what to do next?

no ideaBluetoothDevBroadcomInjector.kext.zip

Share this post


Link to post
Share on other sites
45 minutes ago, MaLd0n said:

Voodooi2CELAN.kext is the core  kext for /S/L/E ?

Keyboard and Keypad dead now...luckily I have bluetooth key and mouse

here the symptoms

	log show --predicate 'process == "kernel"' --start "2018-03-23 00:15:00" > voodooi2clog.txt
	 
018-03-23 00:25:31.344338+0700 0x549      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::Loading GPIO Data for SunrisePoint-LP
2018-03-23 00:25:31.344455+0700 0x549      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Init!
2018-03-23 00:25:31.344459+0700 0x549      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 0
2018-03-23 00:25:31.344503+0700 0x549      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 1
2018-03-23 00:25:31.344534+0700 0x549      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::VoodooGPIO Initializing Community 2
2018-03-23 00:25:31.344646+0700 0x130      Default     0x0                  0      0    kernel: (kernel) VoodooGPIOSunrisePointLP::GPIO Controller is already awake! Not reinitializing.
2018-03-23 00:25:31.346286+0700 0x553      Default     0x0                  0      0    kernel: (AppleHDAController) Sound assertion in AppleHDAController at line 436
2018-03-23 00:25:31.346291+0700 0x553      Default     0x0                  0      0    kernel: (AppleHDAController) Sound assertion in AppleHDAController at line 385
2018-03-23 00:25:31.347913+0700 0x543      Default     0x0                  0      0    kernel: (IOBluetoothHostControllerUSBTransport) **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x3800 ****
2018-03-23 00:25:31.353306+0700 0x536      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d61 Starting I2C controller
2018-03-23 00:25:31.353345+0700 0x536      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d61 Set PCI power state D0
2018-03-23 00:25:31.353361+0700 0x534      Default     0x0                  0      0    kernel: (AppleOnboardSerial) Identified Serial Port UA00 at 0x7f9102d000(<private>)
2018-03-23 00:25:31.353380+0700 0x536      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d61 Publishing nub
2018-03-23 00:25:31.354978+0700 0x542      Default     0x0                  0      0    kernel: com_apple_driver_eficheck::probe(LPCB)
2018-03-23 00:25:31.355141+0700 0x542      Default     0x0                  0      0    kernel: (kernel) SuperIODevice: [Fatal] found unsupported chip! ITE sequence ID=0xffff, Winbond sequence ID=0xffff
2018-03-23 00:25:31.355156+0700 0x542      Default     0x0                  0      0    kernel: com_apple_driver_eficheck::start(LPCB) <1>
2018-03-23 00:25:31.356854+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Probing controller
2018-03-23 00:25:31.356870+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Found valid Synopsys component, continuing with initialisation
2018-03-23 00:25:31.357102+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerNub::pci8086,9d61 SSCN not implemented in ACPI tables
2018-03-23 00:25:31.357113+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerNub::pci8086,9d61 FMCN not implemented in ACPI tables
2018-03-23 00:25:31.357118+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Warning: Error getting bus config, using defaults where necessary
2018-03-23 00:25:31.357133+0700 0x562      Default     0x0                  0      0    kernel: IOSerialBSDClient: not registry member at registerService()
2018-03-23 00:25:31.359014+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Publishing device nubs
2018-03-23 00:25:31.359017+0700 0x532      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Starting I2C controller
2018-03-23 00:25:31.359026+0700 0x563      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d61 Found I2C device: ELAN1300
2018-03-23 00:25:31.359080+0700 0x532      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Set PCI power state D0
2018-03-23 00:25:31.359119+0700 0x532      Default     0x0                  0      0    kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Publishing nub
2018-03-23 00:25:31.363895+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Probing controller
2018-03-23 00:25:31.363907+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Found valid Synopsys component, continuing with initialisation
2018-03-23 00:25:31.364027+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerNub::pci8086,9d60 SSCN not implemented in ACPI tables
2018-03-23 00:25:31.364039+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerNub::pci8086,9d60 FMCN not implemented in ACPI tables
2018-03-23 00:25:31.364044+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Warning: Error getting bus config, using defaults where necessary
2018-03-23 00:25:31.364070+0700 0x56d      Default     0x0                  0      0    kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Publishing device nubs

Error getting bus config I think....I uploaded the log...

Because I removed AppleHPM.kext and AppleIntelLpssi2c.kext and AppleIntelLpssi2controller.kext from /S/L/E? trying put back there on...

HDaudio As windows said. conexant but what cx series I don't know...

Conexxant Smart Audio HDHDAUDIO\FUNC_01&VEN_14F1&DEV_1F72&SUBSYS_10431C50&REV_1000

voodooi2clog.txt

Edited by Babiloe

Share this post


Link to post
Share on other sites
24 minutes ago, Babiloe said:

Voodooi2CELAN.kext is the core  kext for /S/L/E ?

As windows said. conexant but what cx series I don't know...


Conexxant Smart Audio HDHDAUDIO\FUNC_01&VEN_14F1&DEV_1F72&SUBSYS_10431C50&REV_1000

try in clover/kexts/other, if dont work, put in l/e or s/l/e

Share this post


Link to post
Share on other sites
5 minutes ago, MaLd0n said:

try in clover/kexts/other, if dont work, put in l/e or s/l/e

it is already on /S/L/E.

BTW, you have also Voodooi2c,kext on clover/kexts/other on clover zippyshare 

 

Share this post


Link to post
Share on other sites
4 minutes ago, Babiloe said:

it is already on /S/L/E.

BTW, you have also Voodooi2c,kext on clover/kexts/other on clover zippyshare 

 

yes, 3 kext voodooL2C pack + DSDT patches

Share this post


Link to post
Share on other sites
58 minutes ago, MaLd0n said:

yes, 3 kext voodooL2C pack + DSDT patches

Looks like I need to go back to my patched DSDT.aml in clover. somehow I can't get the i2c touchpad go. fn key not functional.

Definitely need VoodooPS2controller.kext to get back keyboard.

Need sleep now. Thank you.

 

Share this post


Link to post
Share on other sites
8 minutes ago, Babiloe said:

Looks like I need to go back to my patched DSDT.aml in clover. somehow I can't get the i2c touchpad go. fn key not functional.

Definitely need VoodooPS2controller.kext to get back keyboard.

Need sleep now. Thank you.

 

don't need, just tell me what not work and we add in new patched DSDT

send me files with my app

RunMe.app.zip

Share this post


Link to post
Share on other sites
1 hour ago, MaLd0n said:

don't need, just tell me what not work and we add in new patched DSDT

send me files with my app

RunMe.app.zip

Fn not working,so including brightness and keyboard light, not test wake / lid yet

battery ok

elan touchpad not work, now I am using 1.0.4 elan 1300 driver on S L E

sound I use voodoohda, applealc not worked. but still on clover by the time this run me app

 

http://www51.zippyshare.com/v/VymsqaYn/file.html

 

Share this post


Link to post
Share on other sites
1 hour ago, Babiloe said:

Fn not working,so including brightness and keyboard light, not test wake / lid yet

battery ok

elan touchpad not work, now I am using 1.0.4 elan 1300 driver on S L E

sound I use voodoohda, applealc not worked. but still on clover by the time this run me app

 

http://www51.zippyshare.com/v/VymsqaYn/file.html

 

try it instead voodoops2controller

Babiloe.zip

u debug keys for brughtness key? if yes, tell me what _Qxx

BTW, u can use only DSDT + SSDT PNLF ;)

8 minutes ago, Thomas126 said:

Holy you really are the best. Thanks a lot mate. Is that Beer link still up to date?

Hey, Thomas!

Yes, is up to date. xD

Share this post


Link to post
Share on other sites
9 minutes ago, MaLd0n said:

try it instead voodoops2controller

Babiloe.zip

u debug keys for brughtness key? if yes, tell me what _Qxx

BTW, u can use only DSDT + SSDT PNLF ;)

Hey, Thomas!

Yes, is up to date. xD

How come the latest webdirvers are working so bad?

Share this post


Link to post
Share on other sites
4 hours ago, Thomas126 said:

How come the latest webdirvers are working so bad?

is very strange, after 10.13.3, web drivers die lol

 

Share this post


Link to post
Share on other sites

MaLd0n

Thank you very much OSX :-) Can I switch Intel HD 530 to GeForce GTX 950A 4GB? Intel 530 is fully functional with a resolution of 1920x1024 but I can not switch to 4K :-(

 

Share this post


Link to post
Share on other sites
On 3/21/2018 at 7:22 PM, MaLd0n said:

8700K

Ok so monday I get these parts:

ASUS PRIME H270-PRO

i3-7100

NVidia GT 1030

I downloaded the folder at post n. 1

Just create USB key and then drop Clover into EFI?

Thanks a lot!

Edited by zzmadd

Share this post


Link to post
Share on other sites

Hi masters of the hack universe¡¡

I need to resolve certain issues with usb volumes that always mounted, if I unmount then return to be mounted.

The low speed I get with the m2 ssd. 150mb as you can see en speedtest.

Another question for ask is the temperature the is rendering, 80º is normal? I use normal cooler like NOX Hummer 212. I see systems that has this and work better.

 

for secondary improvements a question about if is better for performance add the Igpu to my setup. i work with only Nvidia gpu, and for example bruce test takes 43 sec.

I read similar configs like me and betters times.

Mobo Asus Z170-A Bios version 2202

CPU I7 6700 4GHZ

GPU Nvidia GTX 980 4gb

RAM 16GB CRUCIAL DDR4 2133

hd1 system boot. crucial m2 CT275MX300SSD4

HD2 MEDIA STORAGE. CRUCIAL CT500MX500SSD1

I included my bios settings and the send.app files.

https://drive.google.com/open?id=1FEx_EHc_ohavRnzGPYbW4FqIgeoJtpCl

thank you for your support and knowledge.

 

 

180323163834.jpg

180323164407.jpg

180323164351.jpg

180323164334.jpg

180323164324.jpg

180323164312.jpg

180323164204.jpg

180323164150.jpg

180323164124.jpg

180323164057.jpg

180323164042.jpg

180323163955.jpg

180323163941.jpg

180323163934.jpg

180323163918.jpg

m2 crucial.jpg

ssd crucial.jpg

CINEBENCH.jpg

GEEKBENCH.jpg

Share this post


Link to post
Share on other sites
5 hours ago, petr said:

MaLd0n

Thank you very much OSX :-) Can I switch Intel HD 530 to GeForce GTX 950A 4GB? Intel 530 is fully functional with a resolution of 1920x1024 but I can not switch to 4K :-(

 

Optimus? No u need use IntelHD

https://github.com/PMheart/CoreDisplayFixup

3 hours ago, zzmadd said:

Ok so monday I get these parts:

ASUS PRIME H270-PRO

i3-7100

NVidia GT 1030

I downloaded the folder at post n. 1

Just create USB key and then drop Clover into EFI?

Thanks a lot!

Yes, install clover and replace folder in usb stick

Share this post


Link to post
Share on other sites
22 minutes ago, Fr0d0 said:

Hi masters of the hack universe¡¡

I need to resolve certain issues with usb volumes that always mounted, if I unmount then return to be mounted.

The low speed I get with the m2 ssd. 150mb as you can see en speedtest.

Another question for ask is the temperature the is rendering, 80º is normal? I use normal cooler like NOX Hummer 212. I see systems that has this and work better.

 

for secondary improvements a question about if is better for performance add the Igpu to my setup. i work with only Nvidia gpu, and for example bruce test takes 43 sec.

I read similar configs like me and betters times.

Mobo Asus Z170-A Bios version 2202

CPU I7 6700 4GHZ

GPU Nvidia GTX 980 4gb

RAM 16GB CRUCIAL DDR4 2133

hd1 system boot. crucial m2 CT275MX300SSD4

HD2 MEDIA STORAGE. CRUCIAL CT500MX500SSD1

I included my bios settings and the send.app files.

https://drive.google.com/open?id=1FEx_EHc_ohavRnzGPYbW4FqIgeoJtpCl

thank you for your support and knowledge.

 

 

180323163834.jpg

180323164407.jpg

180323164351.jpg

180323164334.jpg

180323164324.jpg

180323164312.jpg

180323164204.jpg

180323164150.jpg

180323164124.jpg

180323164057.jpg

180323164042.jpg

180323163955.jpg

180323163941.jpg

180323163934.jpg

180323163918.jpg

m2 crucial.jpg

ssd crucial.jpg

CINEBENCH.jpg

GEEKBENCH.jpg

replace, reboot, new dump

http://www117.zippyshare.com/v/fliDeMhE/file.html
 

Share this post


Link to post
Share on other sites
On 3/23/2018 at 5:25 AM, MaLd0n said:

try it instead voodoops2controller

Babiloe.zip

u debug keys for brughtness key? if yes, tell me what _Qxx

BTW, u can use only DSDT + SSDT PNLF ;)

Hey, Thomas!

Yes, is up to date. xD

keyboard and elan still can't work, but sound works via appleALC, no need voodoohda, battery works updating...

keyboard dead  without voodoops2controller..

 

uploading the runme result...

http://www68.zippyshare.com/v/vzmRWBgt/file.htmlI will try with voodoops2 instead for testing fn keys

 

I dont know what Qx.. I just use this patch on maciasl, how to find out?

Fn Brightness Keys Patch.txt

FnKeys as Function Keys Patch.txt

KeyboardBacklight Patch 4.txt

ZenBooks LidSleep and ScreenBackLight Patch.txt

 

 

I have tried modded gpio pin for elan 1300 kext that perfect run under my dsdt using voodooi2c.kext and voodooi2chid.kext. Strange it not succeed on your dsdt.

	    Scope (_SB.PCI0.I2C1)
    {
        Device (ETPD)
        {
            Name (SBFG, ResourceTemplate ()
            {
                GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
                    "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer, ,
                    )
                    {   // Pin list
                        0x0055
                    }
            })
            Name (_ADR, One)  // _ADR: Address
            Name (ETPH, Package (0x16)
            {
                "ELAN1200", 
                "ELAN1201", 
                "ELAN1203", 
                "ELAN1200", 
                "ELAN1201", 
                "ELAN1300", 
                "ELAN1301", 
                "ELAN1300", 
                "ELAN1301", 
                "ELAN1000", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1203", 
                "ELAN1203", 
                "ELAN1201", 
                "ELAN1300", 
                "ELAN1300", 
                "ELAN1200", 
                "ELAN1300"
            })
            Name (FTPH, Package (0x05)
            {
                "FTE1001", 
                "FTE1200", 
                "FTE1200", 
                "FTE1300", 
                "FTE1300"
            })
            Method (_HID, 0, NotSerialized)  // _HID: Hardware ID
            {
                If (And (TPDI, 0x04))
                {
                    Return (DerefOf (Index (ETPH, TPHI)))
                }
	                If (And (TPDI, 0x10))
                {
                    Return (DerefOf (Index (FTPH, TPHI)))
                }
	                Return ("ELAN1010")
            }
	            Name (_CID, "PNP0C50")  // _CID: Compatible ID
            Name (_UID, One)  // _UID: Unique ID
            Name (_S0W, 0x03)  // _S0W: S0 Device Wake State
            Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
            {
                If (LEqual (Arg0, ToUUID ("3cdff6f7-4267-4555-ad05-b30a3d8938de") /* HID I2C Device */))
                {
                    If (LEqual (Arg2, Zero))
                    {
                        If (LEqual (Arg1, One))
                        {
                            Return (Buffer (One)
                            {
                                 0x03                                           
                            })
                        }
                        Else
                        {
                            Return (Buffer (One)
                            {
                                 0x00                                           
                            })
                        }
                    }
	                    If (LEqual (Arg2, One))
                    {
                        Return (One)
                    }
                }
                Else
                {
                    Return (Buffer (One)
                    {
                         0x00                                           
                    })
                }
            }
	            Method (_STA, 0, NotSerialized)  // _STA: Status
            {
                If (LOr (LNotEqual (TPIF, One), LAnd (DSYN, One)))
                {
                    Return (Zero)
                }
	                Return (0x0F)
            }
	            Method (_CRS, 0, Serialized)  // _CRS: Current Resource Settings
            {
                Name (SBFB, ResourceTemplate ()
                {
                    I2cSerialBusV2 (0x0015, ControllerInitiated, 0x00061A80,
                        AddressingMode7Bit, "\\_SB.PCI0.I2C1",
                        0x00, ResourceConsumer, , Exclusive,
                        )
                })
                Return (ConcatenateResTemplate (SBFB, SBFG))
            }
        }
    }
	

 

 

EDIT: keyboard WITH VOODOOPS2Controller.kext, appleps2touch kext removed...

a. Fn keys works

b. Backlight LCD works

c. Battery works

d. Audio works

e. Lid works/ when I closed it black..., lcd off, good..

f. when I put fn+f1 it to sleep... but when I click power, screen just black.., that key for hibernate or sleep, mackintosh can't hibernate right?

g. fn keyboard light not working.

h. elan 1300 still not working

 

I have edit your DSDT.aml with KeyboardBacklit Patch 4.txt below and now the Keyboard light works.

Please help me with the ELAN 1300.

 

DSDT.aml

Edited by Babiloe

Share this post


Link to post
Share on other sites

Hello All,

Does anyone have a Custom SSDT for USBInjectAll.kext for a Gigabyte Z370 Gaming 7 MB they can share? I'm having challenges with my Corsair Link waking my rig up from sleep within 2-3 seconds after it "goes under".

Thanks!
Lam

Share this post


Link to post
Share on other sites
13 hours ago, Babiloe said:

keyboard and elan still can't work, but sound works via appleALC, no need voodoohda, battery works updating...

keyboard dead  without voodoops2controller..

 

uploading the runme result...

http://www68.zippyshare.com/v/vzmRWBgt/file.htmlI will try with voodoops2 instead for testing fn keys

 

I dont know what Qx.. I just use this patch on maciasl, how to find out?

Fn Brightness Keys Patch.txt

FnKeys as Function Keys Patch.txt

KeyboardBacklight Patch 4.txt

ZenBooks LidSleep and ScreenBackLight Patch.txt

 

 

I have tried modded gpio pin for elan 1300 kext that perfect run under my dsdt using voodooi2c.kext and voodooi2chid.kext. Strange it not succeed on your dsdt.

 


	    Scope (_SB.PCI0.I2C1)
    {
        Device (ETPD)
        {
            Name (SBFG, ResourceTemplate ()
            {
                GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
                    "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer, ,
                    )
                    {   // Pin list
                        0x0055
                    }
            })
            Name (_ADR, One)  // _ADR: Address
            Name (ETPH, Package (0x16)
            {
                "ELAN1200", 
                "ELAN1201", 
                "ELAN1203", 
                "ELAN1200", 
                "ELAN1201", 
                "ELAN1300", 
                "ELAN1301", 
                "ELAN1300", 
                "ELAN1301", 
                "ELAN1000", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1200", 
                "ELAN1203", 
                "ELAN1203", 
                "ELAN1201", 
                "ELAN1300", 
                "ELAN1300", 
                "ELAN1200", 
                "ELAN1300"
            })
            Name (FTPH, Package (0x05)
            {
                "FTE1001", 
                "FTE1200", 
                "FTE1200", 
                "FTE1300", 
                "FTE1300"
            })
            Method (_HID, 0, NotSerialized)  // _HID: Hardware ID
            {
                If (And (TPDI, 0x04))
                {
                    Return (DerefOf (Index (ETPH, TPHI)))
                }
	                If (And (TPDI, 0x10))
                {
                    Return (DerefOf (Index (FTPH, TPHI)))
                }
	                Return ("ELAN1010")
            }
	            Name (_CID, "PNP0C50")  // _CID: Compatible ID
            Name (_UID, One)  // _UID: Unique ID
            Name (_S0W, 0x03)  // _S0W: S0 Device Wake State
            Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
            {
                If (LEqual (Arg0, ToUUID ("3cdff6f7-4267-4555-ad05-b30a3d8938de") /* HID I2C Device */))
                {
                    If (LEqual (Arg2, Zero))
                    {
                        If (LEqual (Arg1, One))
                        {
                            Return (Buffer (One)
                            {
                                 0x03                                           
                            })
                        }
                        Else
                        {
                            Return (Buffer (One)
                            {
                                 0x00                                           
                            })
                        }
                    }
	                    If (LEqual (Arg2, One))
                    {
                        Return (One)
                    }
                }
                Else
                {
                    Return (Buffer (One)
                    {
                         0x00                                           
                    })
                }
            }
	            Method (_STA, 0, NotSerialized)  // _STA: Status
            {
                If (LOr (LNotEqual (TPIF, One), LAnd (DSYN, One)))
                {
                    Return (Zero)
                }
	                Return (0x0F)
            }
	            Method (_CRS, 0, Serialized)  // _CRS: Current Resource Settings
            {
                Name (SBFB, ResourceTemplate ()
                {
                    I2cSerialBusV2 (0x0015, ControllerInitiated, 0x00061A80,
                        AddressingMode7Bit, "\\_SB.PCI0.I2C1",
                        0x00, ResourceConsumer, , Exclusive,
                        )
                })
                Return (ConcatenateResTemplate (SBFB, SBFG))
            }
        }
    }
	

 

 

 

EDIT: keyboard WITH VOODOOPS2Controller.kext, appleps2touch kext removed...

a. Fn keys works

b. Backlight LCD works

c. Battery works

d. Audio works

e. Lid works/ when I closed it black..., lcd off, good..

f. when I put fn+f1 it to sleep... but when I click power, screen just black.., that key for hibernate or sleep, mackintosh can't hibernate right?

g. fn keyboard light not working.

h. elan 1300 still not working

 

I have edit your DSDT.aml with KeyboardBacklit Patch 4.txt below and now the Keyboard light works.

Please help me with the ELAN 1300.

 

DSDT.aml

ohhhh

checkMaLd0n 2018-03-24 às 13.02.14.png

missing 0x00150000 and 0x00150001, the patch from repo remove devices

where u found this patch? i think the repo L2C is not update

7 hours ago, lambusser said:

Hello All,

Does anyone have a Custom SSDT for USBInjectAll.kext for a Gigabyte Z370 Gaming 7 MB they can share? I'm having challenges with my Corsair Link waking my rig up from sleep within 2-3 seconds after it "goes under".

Thanks!
Lam

just edit UsbInjectAll and use flag uia_exclude=XXXX

EXAMPLE

Unused Ports, uxcluded with flag
uia_exclude=HS01;HS02;HS03;HS04;HS05;HS06;HS10;HS11;SSP1;SSP2;SSP6
 
Used Ports
HS07, HS08, HS09, HS12, HS13, HS14, SSP3, SSP4, SSP5

2 hours ago, alex9440 said:

Hi MaLd0n! What does it mean? Graphics I have completely got started or not?5ab65806b22a9_2018-03-2416_50_10.png.0d80b0a62b7e576363677d61c4da27f1.png

MaLd0n 2018-03-24 às 13.08.18.pngi have it and full work

MaLd0n 2018-03-24 às 13.09.02.png

Share this post


Link to post
Share on other sites
16 minutes ago, MaLd0n said:

Оооо

проверитьMaLd0n 24.03.2018 в 13.02.14.png

отсутствует 0x00150000 и 0x00150001, патч от устройств удалить репо

где и нашел этот патч? я думаю, что L2C репо не обновляется

просто редактировать UsbInjectAll и использовать uia_exclude флаг = XXXX

ПРИМЕР

Неиспользуемые порты, uxcluded с флагом
uia_exclude = HS01; HS02; HS03; HS04; HS05; HS06; HS10; HS11; SSP1; SSP2; SSP6
 
используемые порты
HS07, HS08, HS09, HS12, HS13, HS14, SSP3, SSP4, SSP5

MaLd0n 24.03.2018 в 13.08.18.pngУ меня есть это и полная работа

MaLd0n 24.03.2018 в 13.09.02.png

just do not understand what it means: GVA info: Successfully connected to the Intel plugin, offline Gen95

Снимок экрана 2018-03-24 в 19.22.34.png

Share this post


Link to post
Share on other sites
On 3/20/2018 at 3:37 PM, MaLd0n said:

CLOVER.zip

RX 580 now, nvidia provide a bad driver, i changed ;)

 

Looks great, thanks!

One more.. Is it OK that there is not the IMEI Controller driver?5ab714af73063_2018-03-2506_16_02.thumb.png.499b045189bce6b68b96ffc9bceba8d7.png

And another one. I have a wireless keybord with "FN"key and multimedia keys under F1-12 keys with "FN"pressing. How can I enable that option like on original Mac?

5ab7153d4fb00_2018-03-2506_16_13.png.fec57c79c8622c83431dfb7a85ea5659.png

New "Send me"zip https://drive.google.com/file/d/1pf8vr4x0KNn2-yHGHMWLcBM8agH-Z0em/view?usp=sharing

Edited by iSoul01

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tonyx86
      *** I have started another thread for installing Catalina on the Dell Latitude E6410.  If you were thinking of installing Mojave, but would prefer to skip right to Catalina, click here. ***
       
      I was inspired by @duduclx post here for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5 and subsequently 10.14.6.  Everything works perfectly (including sleep).  I'm starting this thread hoping to help others install Mojave on their E6410s.  A brief installation guide is provided later in this first post.  The interested reader is encouraged to read the other posts in this thread to see how this solution evolved and to learn additional tips/details not provided in this first post (including dual-booting with macOS and Windows).
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 6 developed by @Dr. Hurt and compiled by @bronxteck), not the original version), USBInjectAll (with custom SSDT-UIAC), VoodooSDHC.kext (configured as shown here). Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      Addition of _OFF and _ON methods to _PTS and _WAK methods respectively (to control discrete graphics in order to enable sleep/wake) LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)  
      What IS working:
      SLEEP IS WORKING! Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera SD Card Reader  
      Known issues and their solutions (These issues have all been resolved, with the solutions incorporated into the attached config files.  The issues are listed here for historical purposes and no further work is needed unless stated otherwise).
      Laptop does not sleep on lid close.  Solution is to add Notify (LID0) code to Method (BTNV) in the DSDT.  This is solved in the attached DSDT. Leaving this for historical purposes, but the CLOVER USBFix is no longer necessary after finding that I had incorrectly applied the DSDT _DSM patch for Device (EHC1).  The CLOVER USBFix is not needed after fixing the DSDT..  AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  Thank you, @feartech, for this tip. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European. This configuration (captured in the attached config files) uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The assigned value of ACOS and OSYS in the DSDT are conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc).  The attached config hard-codes ACOS and OSYS values equivalent to those for Linux.  Another way to handle this (different from the method employed in the attached config files) might be to override _OSI with XOSI (defined in a custom SSDT). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  This should be an internal USB port (portType=2).  I learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits.  I am now running with these changes, but haven't found these changes to make any difference in operational behavior.
      Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to (SLPB) Change HDAU.hda-gfx from "onboard-1" to "onboard-2" Change GFX0.hda-gfx from "onboard-1" to "onboard-2" Sleep / Wake does not work with the basic DSDT edits.  I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF and _ON methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/. The Clover boot arg should be changed to "darkwake=0" for reasons explained by @holyfield in this thread.  Leaving this for historical purposes: LCD screen is blank when waking laptop by opening lid (screen is not blank when waking with power button).  Solution is to add darkwake=8 to CLOVER boot args.  Thank you @Hervé for this tip.  
      Brief Installation Guide:
      Configure BIOS (version A17) as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC: Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace: Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN;  Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext.  Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original), VoodooSDHC.kext (configured as shown here). Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z After applying Mojave updates, HWMonitor may not display discrete graphics attributes.  On systems with multiple displays, a second (or third display) may not be active after applying the Mojave update.  The solution to this is to run "sudo kextcache -i /" (in a terminal window) and reboot.  This will usually fix the issue.  If the issue is not fixed, run DosDude's Post Install Utility, apply the Legacy Graphics Patch, reboot and then run "sudo kextcache -i /" if necessary.  
      Credits
      In addition to those mentioned in this first post and in subsequent posts in this thread, much of this solution for the Latitude E6410 was made possible by the numerous contributions of @RehabMan.  I hope he's doing well, wherever he is.  Hopefully he has long since forgotten what a PIA I was (and still am) as I was (and still am) learning hackOS.  
       
       


      E6410-Mojave-6v3.zip
    • By headkaze
      English: https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md
      Russian: https://www.applelife.ru/threads/intel-hd-graphics-3000-4000-4400-4600-5000-5500-5600-520-530-630.1289648/
      Chinese: https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.cn.md
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Nitro+ RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      CLOVER EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Use this folder with fully patched DSDT
      Current EFI 
      Updated 04/02/2020
      EFI Update - 04/02/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      AG Clover Z390 Master Navi Vega EFI.zip - Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI
      AG Clover Z390 Master Polaris EFI.zip - RX5XX Polaris DSDT EFI
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - OpenCore No DSDT and Done the way OpenCore intended it (04/02/2020)
       

      Alternative EFI 2 - N-D-K Fork of OpenCore (04/02/2020)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       
       

       

       

       

       

       

       

    • By kushwavez
      A really good motherboard with macOS compatible bult-in Wifi & Bluetooth

      ASUS Z170-Deluxe (with Wifi)
      BIOS: v3801
      CPU: i7-6700K 4.0 to 4.2 GHz (w/o OC)
      RAM: 1x 16 GB Corsair DDR4 2400 MHz
      GPU: Intel HD 530 (Headless) & ASUS Radeon RX 5700 OC 8 GB
      Audio: ALC 1150
      Ethernet: I219V2, I211-AT
      WiFi & Bluetooth: Broadcom BCM94360HMB Half-Mini-PCI-E
      More Specs: https://www.asus.com/Motherboards/Z170-DELUXE/specifications/
       
      Catalina 10.15.3 - Windows 10
      What is working:
      BCM94360HMB Wifi and Bluetooth AirDrop, Handoff, FaceTime, Messages, App Store, iCloud, etc. Intel HD 530 (QE/CI tested, but now I'm using it in headless) Sleep RX 5700 (QE/CI with 2 1080p monitors connected) Sound USB Ports Two Ethernet ports macOS with a light OC (4.12 GHz - 4.5 Ghz, XMP, ASUS optimal) No problem so far ASUS HyperKit with a KINGSTON NVMe SSD - 250 GB  
      What is not working:
      -  
       
      Not tested:
      VideoProc says that Hardware Decoding\Encoding is fully supported and enabled on both HD 530 and RX 5700 but I didn't test it Thunderbolt (no equipment)  
      Issues:
      None  
      BIOS Settings:
      Boot\CSM (Compatibility Support Module): Launch CSM: Disabled Boot\Secure Boot: OS type: Other OS Secure Boot State: Disabled Advanced\System agent (sa) Configuration: VT-d: Enabled Graphics Configuration: Primary Display: Auto iGPU Multi-monitor: Enabled RC6(Render Standby): Enabled DVMT Pre-Allocated: 128M Advanced\PCH Storage Configuration: SATA Mode Selection: AHCI HyperKit: Enable (if you have NVMe SSD with ASUS HyperKit) Advanced\CPU Configuration: Intel Virtualization Technology: Enabled CPU- Power Management Control: Intel SpeedStep: Enabled CPU- C-States: Enabled Intel SpeedShift: Enabled  
      Getting ready for installation:
      Download the bootpack (Clover v5098): Click here -> ASUS-Z170_catalina.zip  
      Installation:
      Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager) Copy my Clover folder to the USB's EFI folder Boot with the Installer USB If you have any problem (kp or freeze) boot with config_debug.plist to see what causes the issue  
      Post Installation:
      Download Clover Configurator and generate a new Serial Number for yourself  
      Some pictures:
       

       




       
       
       
      Catalina & Windows 10 Dual-Boot (clean install, on one drive):
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac)
       Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart
      Boot into your Win installer, Format the partition you created for Win, install. 
      Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: 
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
      You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      Mounting EFI from Windows:
      Open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Total Commander or Explorer++ in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI)  
      Notes:
       
      2020.02.11: Updated to 10.15.3 -> No problem when/after installing
      2020.01.19: Added ASUS HyperKit NVMe SSD to the "What is working" list
      2020.01.12: Tested system with OC, added more informations to BIOS settings
      2020.01.11: Added SmallTreeIntel82576.kext for 2nd Ethernet, Tested Ethernet ports
      2020.01.11: First upload
       
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://www.olarila.com/topic/5165-olarila-app-images-and-folders/   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell   https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Skylake, Kabylake and Coffeelake is here https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
×