Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

5,392 posts in this topic

Recommended Posts

Advertisement
3 hours ago, Thomas126 said:

Tried it and is working atm. Thanks a lot mate. Still laggy in Safari and full screen video playback. Any suggestions?

nvidia-update.command.zip

1 hour ago, gjn said:

The issue is solved, we had to put the thumb-drive directly on an USB socket on the mobo. Thanks anyway!

;)

Share this post


Link to post
Share on other sites

black screen when installing the system.

 

All In One 23,8", i5-6400 - (2,7GHz)  , RAM 16GB DDR4 2133Mhz, SSD 128GB + SSD 256GB -, GeForce GTX 950A - 4GB

osx.jpg

Share this post


Link to post
Share on other sites
17 minutes ago, petr said:

black screen when installing the systemimageproxy.php?img=&key=c17464ef1b1b51c7.

 

All In One 23,8", i5-6400 - (2,7GHz)  , RAM 16GB DDR4 2133Mhz, SSD 128GB + SSD 256GB -, GeForce GTX 950A - 4GB

osx.jpg

u can disable intelHDGraphics in bios?

Share this post


Link to post
Share on other sites
9 minutes ago, petr said:

there is no way to disable intelHDGraphics in bios :-(

all in one, the bios is like notebooks, in some cases we need disable Nvidia/Amd and use IntelHDGraphics. Confirm it!

Share this post


Link to post
Share on other sites

Thank you very much for trying, but I'm going to try but it's too complicated for me

Share this post


Link to post
Share on other sites
14 minutes ago, petr said:

Thank you very much for trying, but I'm going to try but it's too complicated for me

check in windows system what device nvidia gpu use

Share this post


Link to post
Share on other sites

intel HD Graphics 530

GeForce GTX 950A

-----------------------------------------------

_SB.PC10.PEG0.PEGP

Share this post


Link to post
Share on other sites
29 minutes ago, petr said:

intel HD Graphics 530

GeForce GTX 950A

-----------------------------------------------

_SB.PC10.PEG0.PEGP

try

http://www69.zippyshare.com/v/WW7FNYOj/file.html
 

24 minutes ago, corbiz said:

Hey mald0n
Where cane see success fully DSDT patched in system report

Sent from my GT-I9195 using Tapatalk
 

??? repo?

Share this post


Link to post
Share on other sites
35 minutes ago, corbiz said:

about mac >system report

Sent from my GT-I9195 using Tapatalk
 

u need check in ioreg and rape table

19 minutes ago, YoYelloW said:

Mal, i still have an issue with one of my systems, all works fine, except bluetooth is not finding any devices. any idea on how to fix this?

In using an BCM943602BAED/DW1830 which should work..

https://stack.yoyellow.nl/s/yGwmUJGjUi9gxGO

https://stack.yoyellow.nl/s/oq3cUkP1DjMg3Eq

https://bitbucket.org/RehabMan/os-x-brcmpatchram

Share this post


Link to post
Share on other sites

babilu's MacBook Pro.ioregHi Maldon.

I have a new setup.

S14 S410UN with i5-8250u, SSD 512MB SATA, 2TB HDD 

SSD with EFI for win10

2TB HDD for cloverefi , osx, osx recovery, DATA, installer high Sierra

babilu's MacBook Pro.ioregbabilu's MacBook Pro.ioreg

Condition works:

1. Wake / suspend / off look like ok

2. Fn Function works

3. Backlight screen works look lkely ok [but black-sudden light bright not smooth) 4. Backlight keyboard works via # Backlight 4 step Patch by EMlyDinEsH (www.osxlatitude.com)

5. Battery acpi works but have a problem not updating the percentage simultaneously.

6. Keyboard ok, Touchpad Elan 1300 with patching on DSDT and installing Voodooi2c special (with ELAN 1300 patch) and Voodooi2cHID on clover. Did i patching dsdt correct?

7. i dont know which config.plist optimized. i have 4 config.

    first install using clover default plist for installing part 1 (copy to hdd) -2(installing/configuring), using spoof.aml

    and part 3(setting user) for booting first time i had use the s15 510 config.plist for disabling the mx150 graphics loaded.

    the config.620.plist  working only after _ini patch otherwise user 38 or something look like FakeID not there.

8. disabled the mx150 via ssdt-8.aml _ini only, however off and reg patch not used, because weird no method there etc. please check out for me.

 

Plan next:

1. Which config.plist optimal for me, macbook air or macbookpro 13,1, and what patching on plist  i clicked for optimal

2. USB power not configured via dsdt? could you help for me?

3. Please check my modified dsdt / ssdt for battery moving and mx150 disabled, voodooi2c also.

   I removed both AppleI2C kext and AppleHPM.kext? replaced with  Voodooi2c kext? Did i need to removed those three kext original on S./L./E

4. What my connexant type? i want to patch hdapatcher since voodooHDA seems crackle. how to find the model? must have linux live usb ? (maybe OOT)

5. What ssdt patch do i need? can you check my patched dsdt. and my ioreg. Does it correct / optimized?

 

I uploading the clover consisting dsdt original and patched ones....wait

 

CLOVER :

http://www40.zippyshare.com/v/LCJKwAAF/file.html

 

 

babilu's MacBook Pro.zip

Edited by Babiloe
upload failed

Share this post


Link to post
Share on other sites
9 minutes ago, Babiloe said:

Hi Maldon.

I have a new setup.

S14 S410UN with i7-8250u

 


	ELAN WBF Fingerprint Sensor ACPI\VEN_ELAN&DEV_7001 \_SB.PCI0.SPI0.FPRT
Qualcomm Atheros Bluetooth 4.1 USB\VID_13D3&PID_3491&REV_0001 \_SB.PCI0.XHC.RHUB.HS08
USB Video Device Webcam USB\VID_13D3&PID_5A07&REV_1701&MI_00  \_SB.PCI0.XHC.RHUB.HS06.DCAM
Intel(R) UHD Graphics 620 PCI\VEN_8086&DEV_5917&SUBSYS_1C501043&REV_07 \_SB.PCI0.GFX0
NVIDIA GeForce MX150 PCI\VEN_10DE&DEV_1D10&SUBSYS_15AE1043&REV_A1 \_SB.PCI0.RP01.PEGP
Intel(R) 6th Generation Core Processor Family Platform I/O SATA AHCI Controller PCI\VEN_8086&DEV_9D03&SUBSYS_1C501043&REV_21 \_SB.PCI0.SAT0
Intel(R) Dynamic Platform and Thermal Framework Generic Participant ACPI\VEN_INT&DEV_3403 \_SB.PCI0.LPCB.EC0.SEN1 \_SB.PCI0.LPCB.EC0.SEN3 \_SB.PCI0.B0D4
Intel(R) Dynamic Platform and Thermal Framework Manager ACPI\VEN_INT&DEV_3400 \_SB.IETM
Qualcomm Atheros QCA9377 Wireless Network Adapter PCI\VEN_168C&DEV_0042&SUBSYS_22311A3B&REV_31 \_SB.PCI0.RP06.PXSX
usb3 USB xHCI Compliant Host Controller PCI\VEN_8086&DEV_9D2F&SUBSYS_201F1043&REV_21 \_SB.PCI0.XHC
Intel(R) Management Engine Interface  PCI\VEN_8086&DEV_9D3A&SUBSYS_1C501043&REV_21 \_SB.PCI0.HECI
PCI Express Root Complex ACPI\VEN_PNP&DEV_0A08 \_SB.PCI0
Intel(R) Serial IO GPIO Host Controller - INT344B ACPI\VEN_INT&DEV_344B \_SB.PCI0.GPI0
Intel(R) Serial IO I2C Host Controller ELAN 1300 - 9D60 PCI\VEN_8086&DEV_9D60&SUBSYS_1C501043&REV_21 \_SB.PCI0.I2C0
Intel(R) Serial IO I2C Host Controller - 9D61 PCI\VEN_8086&DEV_9D61&SUBSYS_1C501043&REV_21 \_SB.PCI0.I2C1
Intel(R) Serial IO SPI Host Controller - 9D29 PCI\VEN_8086&DEV_9D29&SUBSYS_1D2D1043&REV_21 \_SB.PCI0.SPI0
ACPI Lid ACPI\VEN_PNP&DEV_0C0D \_SB.PCI0.LPCB.EC0.LID
Intel(R) Serial IO GPIO Host Controller - INT344B   ACPI\VEN_INT&DEV_344B  \_SB.PCI0.GPI0
	Conexxant Smart Audio HDHDAUDIO\FUNC_01&VEN_14F1&DEV_1F72&SUBSYS_10431C50&REV_1000
	

 

Condition works:

1. Wake / suspend / off look like ok

2. Fn Function works

3. Backlight screen works look lkely ok [but black-sudden light bright not smooth) 4. Backlight keyboard works via # Backlight 4 step Patch by EMlyDinEsH (www.osxlatitude.com)

5. Battery acpi works but have a problem not updating the percentage simultaneously.

6. Keyboard ok, Touchpad Elan 1300 with patching on DSDT and installing Voodooi2c special (with ELAN 1300 patch) and Voodooi2cHID on clover. Did i patching dsdt correct?

7. i dont know which config.plist optimized. i have 4 config.

    first install using clover default plist for installing part 1 (copy to hdd) -2(installing/configuring), using spoof.aml

    and part 3(setting user) for booting first time i had use the s15 510 config.plist for disabling the mx150 graphics loaded.

    the config.620.plist  working only after _ini patch otherwise user 38 or something look like FakeID not there.

8. disabled the mx150 via ssdt-8.aml _ini only, however off and reg patch not used, because weird no method there etc. please check out for me.

 

Plan next:

1. Which config.plist optimal for me, macbook air or macbookpro 13,1, and what patching on plist  i clicked for optimal

2. USB power not configured via dsdt? could you help for me?

3. Please check my modified dsdt / ssdt for battery moving and mx150 disabled, voodooi2c also.

   I removed both AppleI2C kext and AppleHPM.kext? replaced with  Voodooi2c kext? Did i need to removed those three kext original on S./L./E

4. What my connexant type? i want to patch hdapatcher since voodooHDA seems crackle. how to find the model? must have linux live usb ? (maybe OOT)

5. What ssdt patch do i need? can you check my patched dsdt. and my ioreg. Does it correct / optimized?

 

I uploading the clover consisting dsdt original and patched ones....wait

 

 

send me files

RunMe.app.zip

up in http://www.zippyshare.com/

u can use nvidia or only intel HD?

Share this post


Link to post
Share on other sites

the installation was finally run but I can not install (the recovery server can not be contacted)

Share this post


Link to post
Share on other sites
19 minutes ago, MaLd0n said:

send me files

RunMe.app.zip

up in http://www.zippyshare.com/

u can use nvidia or only intel HD?

Sent me files

http://www40.zippyshare.com/v/LCJKwAAF/file.html

 

Optimus type MX150 Nvidia and UHD 620 5917 not 5916...

So I think I can run 620 intel only as rehab man told. dO I need change dsdt or IGPu dsl to 5917 instead of 5916? 

Edited by Babiloe
I think intel only...cause Optimus prime

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By midi-sama
      After a long time of cooking this computer up with a lot of stuff, I'm finally releasing my guide for this P50 with OpenCore.
       
      Lenovo ThinkPad P50 macOS Install with OpenCore
       
      This thread may be used for questions/corrections/additions. Good Luck.
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Current EFIs 
      Updated 26/03/2020
      PLEASE NOTE - You MUST update to the latest Clover EFI before updating to 10.15.4 or you may find your unable to update.
       
      Clover EFI Updated 26/03/20 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      Clover Z390 Master Vega Navi EFI 260320.zip - Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI
      Clover Z390 Master Polaris EFI 260320.zip - R5XX Polaris DSDT EFI
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - OpenCore No DSDT and Done the way OpenCore intended it (03/03/2020)
       

      Alternative EFI 2 - N-D-K Fork of OpenCore (03/03/2020)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Disabled
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       
       

       

       

       

       

       

       

    • By kylon
      A big thanks to wegface for teaching me a lot of things.
       
       
      Tested on Catalina 10.15.4 and Clover EFI 5104 (Catalina Patcher)
       
      Not Working:
      - realtek sd card reader (pm me if you have a fix)
       
      Notes:
      **CPU patches are disabled, if you are using a locked BIOS you must enable them**
       
      Clover EFI:
      - Install it in UEFI Mode and change your hdd partition table to GPT.
      - You will be able to install ANY OS in EFI mode, even if this pc does not support EFI at all! (No guide available for this)
       
      You will need:
      My unlocked BIOS (OPTIONAL) (here) Latest Clover config from CCE Bank (here) (asus k53sj-kylon) Rehabman Voodoo PS2 Controller (here) acidanthera AppleALC (here) acidanthera Lilu (here) acidanthera VirtualSMC (here) acidanthera SMCBatteryManager (here) acidanthera SMCLightSensor (here) acidanthera WhateverGreen (here) Mieze Realtek RTL8111 (here)
    • By kushwavez
      A really good motherboard with macOS compatible bult-in Wifi & Bluetooth

      ASUS Z170-Deluxe (with Wifi)
      BIOS: v3801
      CPU: i7-6700K 4.0 to 4.2 GHz (w/o OC)
      RAM: 1x 16 GB Corsair DDR4 2400 MHz
      GPU: Intel HD 530 (Headless) & ASUS Radeon RX 5700 OC 8 GB
      Audio: ALC 1150
      Ethernet: I219V2, I211-AT
      WiFi & Bluetooth: Broadcom BCM94360HMB Half-Mini-PCI-E
      More Specs: https://www.asus.com/Motherboards/Z170-DELUXE/specifications/
       
      Catalina 10.15.4 - Windows 10
      What is working:
      BCM94360HMB Wifi and Bluetooth AirDrop, Handoff, FaceTime, Messages, App Store, iCloud, etc. Intel HD 530 (QE/CI tested, but now I'm using it in headless) Sleep RX 5700 (QE/CI with 2 1080p monitors connected) Sound USB Ports Two Ethernet ports macOS with a light OC (4.12 GHz - 4.5 Ghz, XMP, ASUS optimal) No problem so far ASUS HyperKit with a KINGSTON NVMe SSD - 250 GB  
      What is not working:
      -  
       
      Not tested:
      VideoProc says that Hardware Decoding\Encoding is fully supported and enabled on both HD 530 and RX 5700 but I didn't test it Thunderbolt (no equipment)  
      Issues:
      None  
      BIOS Settings:
      Boot\CSM (Compatibility Support Module): Launch CSM: Disabled Boot\Secure Boot: OS type: Other OS Secure Boot State: Disabled Advanced\System agent (sa) Configuration: VT-d: Enabled Graphics Configuration: Primary Display: Auto iGPU Multi-monitor: Enabled RC6(Render Standby): Enabled DVMT Pre-Allocated: 128M Advanced\PCH Storage Configuration: SATA Mode Selection: AHCI HyperKit: Enable (if you have NVMe SSD with ASUS HyperKit) Advanced\CPU Configuration: Intel Virtualization Technology: Enabled CPU- Power Management Control: Intel SpeedStep: Enabled CPU- C-States: Enabled Intel SpeedShift: Enabled  
      Getting ready for installation:
      Download the bootpack (Clover v5106): Click here -> asus-z170_clover_5107.zip  
      Installation:
      Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager) Copy my Clover folder to the USB's EFI folder Boot with the Installer USB If you have any problem (kp or freeze) boot with config_debug.plist to see what causes the issue  
      Post Installation:
      Download Clover Configurator and generate a new Serial Number for yourself  
      Some pictures:
       

       




       
       
       
      Catalina & Windows 10 Dual-Boot (clean install, on one drive):
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac)
       Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart
      Boot into your Win installer, Format the partition you created for Win, install. 
      Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: 
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
      You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      Mounting EFI from Windows:
      Open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Total Commander or Explorer++ in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI)  
      Notes:
       
      2020.03.26: Updated to 10.15.4 -> Updated WhateverGreen, Lilu -> Updated Clover to v5107
      2020.03.23: Removed "EmuVariableUefi.efi" -> deleted, caused false nvram map, now it's native, updated Clover to v5106
      2020.02.11: Updated to 10.15.3 -> No problem when/after installing
      2020.01.19: Added ASUS HyperKit NVMe SSD to the "What is working" list
      2020.01.12: Tested system with OC, added more informations to BIOS settings
      2020.01.11: Added SmallTreeIntel82576.kext for 2nd Ethernet, Tested Ethernet ports
      2020.01.11: First upload
       
    • By ludufre
      Installing macOS Catalina 10.15.4 on Asus VivoBook S400CA
       
       
      There are several versions of this laptop.
       
      These are the versions I've seen so far:
      - S400CA-BRA-CA206H = i3-2375M with ALC269VB
      - S400CA-BRA-CA178H = i5-3317U with VT1802P
       
      I believe that all models are practically identical except the variations i3 and i5 that have particularities, because one is Sandy Bridge platform and another Ivy Bridge.
       

      Changelog:
       
      03/24/2019 20:35h GMT-0
      - Added update 10.15.4 instructions.
       
      12/11/2019 04:35h GMT-0
      - Added update 10.15.2 instructions.
       
      11/11/2019 04:41h GMT-0
      - Merged Core i3 and i5 config.plist.
      Same SMBIOS now. Core i3 version need to remove: Devices - Properties - PciRoot(0x0)/Pci(0x2,0x0). - Just one USBPorts.kext now, since SMBIOS are same. 
       
      11/10/2019 20:41h GMT-0
      - Updated USB 3.0 injection. (Removed USBInjectAll.kext and SSDT-UIAC.aml and added USBPorts.kext)
      - Replaced AtherosE2200Ethernet.kext with version 2.3.0 RELEASE. (Previously was DEBUG build)
       
      11/10/2019 00:22h GMT-0
      - Added Battery's DSDT patch.
      - Fixed USB 3.0. (Replaced USB's DSDT patch, removed FakePCIID.kext and FakePCIID_XHCIMux.kext and added SSDT-EC.aml and SSDT-UIAC.aml)
      - Updated config.plist. (Removed PNP0C09 to PNPFFFF, not needed with SSDT-EC.aml)
       
      11/08/2019 14:33h GMT-0
      - First version.
       
      What works and what does not
       
      Core i3 Version specific
      - Processor: Intel Core i3-2375M ->  Work. All SpeedStep stages.
      - Video Card: Intel HD3000 ->  Work. QE/CI without Metal. (additional step bellow)
      - Audio: ALC269VB ->  Work. But no earphone. (more details)
       
      Core i5 Version specific
      - Processor: Intel Core i5-3317U ->  Work. All SpeedStep stages.
      - Video Card: Intel HD4000 ->  Work. QE/CI and Metal.
      - Audio: VT1802P ->  Work.
       
      Common
      - Chipset: Intel HM76 ->  Work.
      - HDMI ->  Work.
      - VGA ->  Not work. Normal.
      - WiFi/Bluetooth: Intel AC 3160 ->  Not work. Replaced with DW1560 / AW-CE123H.
      - Ethernet: Intel AR8161 ->  Work.
      - Card Reader: Unknow ->  Not work.
      - Keyboard and Touchpad ->  Work.
      - FN keyboards keys ->  Not work yet.
      - Webcam ->  Work.
      - Battery ->  Work.
      - Touch screen ->  Not work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff and Continuity ->  Work after replaced wireless.
      - Instant Hotspot ->  Not work even after replaced wireless.
       
       
      Todo
       
      - Make earphone work in Core i3 version.
      - Fix FN keyboard keys.
      - Convert DSDT patches to hotpatch.
      - Make touch screen work.
      - Make card reader work.
      - Make trackpad appear in System Preferences
       
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Catalina install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minutes.
       


      Install bootloader

      Download the CloverEFI from official repository (used 5098) and install only with these options on "Install macOS Catalina":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - Recommended Drivers - FSInject (I still don't know if it's really necessary)
      - UEFI Drivers - File System drivers - ApfsDriverLoader (Support to APFS partitions)
      - UEFI Drivers - File System drivers - VBoxHfs (Support HFS/HFS+ partitions)
      - UEFI Drivers - Memory fix drivers - AptioMemoryFix (Fix the memory management of de UEFI/BIOS)
      - UEFI Drivers - Additional drivers - CsmVideoDxe
       
      FileVault 2
       
      If you plan to use FileVault 2, you need to download additional drivers, since what comes with Clover is not up to date and use VirtualSMC instead of FakeSMC.
      Follow instructions bellow:
       
      From current Clover installation, check these options to USB keyboard/mouse work on password screen:
      - UEFI Drivers - Human Interface Devices - UsbKbDxe
      - UEFI Drivers - Human Interface Devices - UsbMouseDxe
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      Download the versions 2.1.0 and 2.0.9 of AppleSupportPkg from: https://github.com/acidanthera/AppleSupportPkg/releases
      We need the last version of AppleGenericInput.efi that is inside 2.1.0 and last version of AppleUiSupport.efi that is inside 2.0.9.
      OR download attached bellow.
       
      Put in /Volumes/EFI/EFI/CLOVER/drivers/UEFI/
       
      That's it! FileVault 2 will work without problems.
       

       
       
      Make things works
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      - Replace the /Volumes/EFI/EFI/CLOVER/config.plist with mine attached below according to your processor version.
      - Put all SSDT-*.aml attached below in /Volumes/EFI/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.7.0.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Core i3 version:
      - Go to Devices - Properties.
      - Remove: PciRoot(0x0)/Pci(0x2,0x0).
       
      Core i5 version:
      - Remove: /Volumes/EFI/EFI/CLOVER/ACPI/patched/SSDT-PWR.aml
       
      Copy the Clover Configurator to flash drive because you will need later.
       
      Download those Kexts and put in /Volumes/EFI/EFI/CLOVER/kexts/Other/
       
      - Download the VirtualSMC.kext, SMCProcessor.kext, SMCBatteryManager.kext and UEFI driver (put VirutalSmc.efi inside /Volumes/EFI/EFI/drivers/UEFI/). I used the version 1.0.9.
      - Download the Lilu.kext from here. I used the version 1.3.9.
      - Download the VoodooPS2Controller.kext from here. I used version 2.0.4.
      - Download the AtherosE2200Ethernet.kext from here. I used the version 2.3.0 compiled from source (attached below), but the release 2.2.2 works too.
      - Download the AppleALC.kext from here. I used the version 1.4.3.
      - Download the WhateverGreen.kext from here. I used the version 1.3.4.
      - Download the USBPorts.kext attached bellow to properly inject USBs.
       
       
      Keyboard swap Command with Option (optional)
       
      - If you prefer, you can swap Command and Option keys, to map Win Key - Command and Alt - Option.
      - Change /Volumes/EFI/EFI/CLOVER/OEM/S400CA/UEFI/kexts/10.15/VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Keyboard.kext/Contents/Info.plist:
      <key>Swap command and option</key> <true/> to:
      <key>Swap command and option</key> <false/> Or, download the version 2.0.4 already adjusted attached bellow.
       
       
      Wifi and Bluetooth (DW1560 / AW-CE123H)
       
      After replaced the wireless card. Download those Kexts and put in /Volumes/EFI/EFI/CLOVER/kexts/10.15/
       
      - Download the AirportBrcmFixup.kext from here. I used the version 2.0.4. (To enable Wireless)
      - Download the BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext from here. I used the version 2.5.0. (To enable Bluetooth)
      - Download the BT4LEContinuityFixup.kext from here. I used the version 1.1.4. (To enable Handoff and Continuity)
       
      Keep in mind that the bluetooth kexts are currently in development and the official releases will be available in future in the repository: https://github.com/acidanthera/BrcmPatchRAM/releases
       
      Now you can start the installation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is the latest: 210
       
      - Shutdown and insert the flash drive.
      - Power on with F2 pressed to enter BIOS setup.
      - Change value: Advanced - Intel Virtualization Technology to DISABLED
      - Change value: Advanced - Intel(R) Anti-Theft Technology Configuration to DISABLED
      - Save & Exit Setup (F10)
       
      - Now, hold the ESC
      - In the list, select your flash drive.
      - Choose the flash drive (white icon).
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press ESC again and select the flash drive.
       
      Choose the internal disk (gray hdd icon) if not already selected.

      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation
       
      Bootloader

      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to make the system disk bootable.

      Open the Clover Configurator from flash drive that you copied before.

      Mount and open the flash drive EFI partition. (Inside Clover Configurator, Mount EFI -> Select flash drive in Efi Partitions list -> Mount Partition -> Open Partition)
       
      Copy the EFI folder to desktop.
       
      Go back to Clover Configurator, unmount the EFI partition of the flash drive and mount and open the EFI partition of internal disk.
       
      Move the EFI folder from Desktop to EFI partition of the internal disk.
       
      Eject the flash drive.
       
      Move all Kexts from EFI partition of internal disk to /Library/Extensions and make kext cache, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/10.15/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
      If you go directly to BIOS you have to add Clover entry manually:
       
      - Go to "Boot" and press "Add New Boot Option".
      - Select "Add boot option", write CLOVER and press Enter.
      - In "Select Filesystem", choose the option that contains "HD". Like "PCI(1F|2)\DevicePath(Type 3, SubType 12)HD(Part1,Sig2a0127c1-ea5d-44d3-8967-57e59c1f0e3b)".
      - Select "Path for boot option", write EFI\BOOT\BOOTX64.efi and press Enter.
      - Select "Create" and press enter.
      - Go to "Save & Exit" and select "Save Changes and Exit".
       
      Intel HD 3000 - Core i3 version only
       
      If you have the i3 version with HD 3000 iGPU you have to do an additional step:
       
      - Download latest Legacy Video Patch from: https://github.com/chris1111/Legacy-Video-patch/releases
      - Always use the version compatible with your current Catalina build!
      - Run the installer and reboot.
      - Graphics acceleration now works. But you'll have some rare artifacts because of lack support of Metal.
       
       
      Battery, USB & Sleep DSDT patch
       
      First we need dump current DSDT/SSDT tables:
      - Restart.
      - On Clover menu, press F4 to dump.
      - Select internal disk and start normally.
       
      Prepare files:
      - Open the Clover Configurator from flash drive that you copied before.
      - Mount and open the internal disk EFI partition. (Inside Clover Configurator, Mount EFI -> Select internal disk in Efi Partitions list -> Mount Partition -> Open Partition)
      - Navigate to EFI/CLOVER/ACPI/origin/.
      - Copy DSDT.aml to EFI/CLOVER/ACPI/patched/.
      - You'll have DSDT.aml, SSDT-EC.aml, SSDT-PWR.aml (if Core i3 version) and SSDT-PNLF.aml in EFI/CLOVER/ACPI/patched/.
       
      Apply patches to DSDT.aml:
      - Download the MacIASL from here. I used the version 2018-0507.
      - Open the DSDT.aml from patched/ with MacIASL.
      - Click in "Patch" button.
      - Paste and "Apply" each patches below.
       
      Battery patch
      #Maintained by: RehabMan for: Laptop Patches #battery_ASUS-N55SL.txt # created by RehabMan 8/12/2013 # created originally for jesselid # works for: # ASUS N55SL, BIOS rev. 204 # ASUS VivoBook series # ASUS Zenbook UX31A # ASUS UX301LA # ASUS X553E-SX399V # ASUS F501A # ASUS K55VM # ASUS U46SV, BIOS rev. 2.04 # ASUS N43 # ASUS PU500CA (90NB00F1-M01120) # ASUS N73SV # ASUS X401A-WX108 # ASUS F551CA Bios rev. 207 # ASUS S551LB VivoBook # ASUS ZenBook UX32VD # ASUS ZenBook UX32V # ASUS F550L-X455H # ASUS X53S # ASUS K550JD-XX003H # ASUS G53SX # ASUS K56CB # ASUS UX305 # ASUS N550LF (per gabberZ) # ASUS TP300LA # ASUS X200LA # ASUS TP500LA (per haimann951) # ASUS U46E (per jacopers) # ASUS N550JK (per sonicmule) # ASUS K46CM # ASUS N76-VB-T4038H (per Tamshiii) # ASUS Zenbook Pro UX501VW (per Jingu) # ASUS G751JY (per Going Bald) # ASUS S300CA (per mugen441) # ASUS F556UA-AB32 (per Jdazzle44) # ASUS UX306UA (per MaraficeEye) # ASUS N550JV (per Xracer99) # ASUS X540LA (per arg274) # ASUS X540LJ (per palash) # ASUS X550VX (per vualeks) # ASUS UX330UA (per fluxo) # ASUS UX303UB (per CyanTech) # ASUS K550JK (per m3ftwz) # ASUS TP500LB (per Archangeliques) # ASUS X556UA (per ben9923) # ASUS UX410 (per minhquang211090) # ASUS N552VW (per nicolas2121) # ASUS Vivobook NV752 (per tmazzoni) # ASUS Strix FX502VM/GL502VM (per benspoonder) # ASUS X53E (per REvandenBerg) # ASUS UX430 (per starcentral) # ... # and many others into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # not really for battery, but might come in handy to read fan speed(s) into device label EC0 code_regex TAH0,\s+16 replace_matched begin TH00,8,TH01,8 end; into device label EC0 code_regex TAH1,\s+16 replace_matched begin TH10,8,TH11,8 end; into method label TACH code_regex \(TAH0, replace_matched begin (B1B2(TH00,TH01), end; into method label TACH code_regex \(TAH1, replace_matched begin (B1B2(TH10,TH11), end; into method label GFAN code_regex \(\\_SB\.PCI0\.LPCB\.EC0\.TAH0, replace_matched begin (B1B2(\\_SB.PCI0.LPCB.EC0.TH00,\\_SB.PCI0.LPCB.EC0.TH01), end; # battery EC into device label EC0 code_regex B0SN,\s+16 replace_matched begin B0S0,8,B0S1,8 end; into device label EC0 code_regex B1SN,\s+16 replace_matched begin B1S0,8,B1S1,8 end; into method label BIFA code_regex \(B0SN, replace_matched begin (B1B2(B0S0,B0S1), end; into method label BIFA code_regex \(B1SN, replace_matched begin (B1B2(B1S0,B1S1), end; into device label EC0 code_regex DT2B,\s+16 replace_matched begin T2B0,8,T2B1,8 end; into method label SMBR code_regex \(DT2B, replace_matched begin (B1B2(T2B0,T2B1), end; into method label SMBW code_regex Store\s+\(([^,]*),\s+DT2B\) replace_matched begin Store(%1,T2B0) Store(ShiftRight(%1,8),T2B1) end; into device label EC0 insert begin Method (RDBA, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BA00, Index(TEMP, 0x00))\n Store (BA01, Index(TEMP, 0x01))\n Store (BA02, Index(TEMP, 0x02))\n Store (BA03, Index(TEMP, 0x03))\n Store (BA04, Index(TEMP, 0x04))\n Store (BA05, Index(TEMP, 0x05))\n Store (BA06, Index(TEMP, 0x06))\n Store (BA07, Index(TEMP, 0x07))\n Store (BA08, Index(TEMP, 0x08))\n Store (BA09, Index(TEMP, 0x09))\n Store (BA0A, Index(TEMP, 0x0A))\n Store (BA0B, Index(TEMP, 0x0B))\n Store (BA0C, Index(TEMP, 0x0C))\n Store (BA0D, Index(TEMP, 0x0D))\n Store (BA0E, Index(TEMP, 0x0E))\n Store (BA0F, Index(TEMP, 0x0F))\n Store (BA10, Index(TEMP, 0x10))\n Store (BA11, Index(TEMP, 0x11))\n Store (BA12, Index(TEMP, 0x12))\n Store (BA13, Index(TEMP, 0x13))\n Store (BA14, Index(TEMP, 0x14))\n Store (BA15, Index(TEMP, 0x15))\n Store (BA16, Index(TEMP, 0x16))\n Store (BA17, Index(TEMP, 0x17))\n Store (BA18, Index(TEMP, 0x18))\n Store (BA19, Index(TEMP, 0x19))\n Store (BA1A, Index(TEMP, 0x1A))\n Store (BA1B, Index(TEMP, 0x1B))\n Store (BA1C, Index(TEMP, 0x1C))\n Store (BA1D, Index(TEMP, 0x1D))\n Store (BA1E, Index(TEMP, 0x1E))\n Store (BA1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBA, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BA00)\n Store (DerefOf(Index(TEMP, 0x01)), BA01)\n Store (DerefOf(Index(TEMP, 0x02)), BA02)\n Store (DerefOf(Index(TEMP, 0x03)), BA03)\n Store (DerefOf(Index(TEMP, 0x04)), BA04)\n Store (DerefOf(Index(TEMP, 0x05)), BA05)\n Store (DerefOf(Index(TEMP, 0x06)), BA06)\n Store (DerefOf(Index(TEMP, 0x07)), BA07)\n Store (DerefOf(Index(TEMP, 0x08)), BA08)\n Store (DerefOf(Index(TEMP, 0x09)), BA09)\n Store (DerefOf(Index(TEMP, 0x0A)), BA0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BA0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BA0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BA0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BA0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BA0F)\n Store (DerefOf(Index(TEMP, 0x10)), BA10)\n Store (DerefOf(Index(TEMP, 0x11)), BA11)\n Store (DerefOf(Index(TEMP, 0x12)), BA12)\n Store (DerefOf(Index(TEMP, 0x13)), BA13)\n Store (DerefOf(Index(TEMP, 0x14)), BA14)\n Store (DerefOf(Index(TEMP, 0x15)), BA15)\n Store (DerefOf(Index(TEMP, 0x16)), BA16)\n Store (DerefOf(Index(TEMP, 0x17)), BA17)\n Store (DerefOf(Index(TEMP, 0x18)), BA18)\n Store (DerefOf(Index(TEMP, 0x19)), BA19)\n Store (DerefOf(Index(TEMP, 0x1A)), BA1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BA1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BA1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BA1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BA1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BA1F)\n }\n end; into device label EC0 code_regex BDAT,\s+256 replace_matched begin //BDAT, 256,\n BA00,8,BA01,8,BA02,8,BA03,8,\n BA04,8,BA05,8,BA06,8,BA07,8,\n BA08,8,BA09,8,BA0A,8,BA0B,8,\n BA0C,8,BA0D,8,BA0E,8,BA0F,8,\n BA10,8,BA11,8,BA12,8,BA13,8,\n BA14,8,BA15,8,BA16,8,BA17,8,\n BA18,8,BA19,8,BA1A,8,BA1B,8,\n BA1C,8,BA1D,8,BA1E,8,BA1F,8\n end; into method label SMBR code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into method label SMBR code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into device label EC0 insert begin Method (RDBB, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BB00, Index(TEMP, 0x00))\n Store (BB01, Index(TEMP, 0x01))\n Store (BB02, Index(TEMP, 0x02))\n Store (BB03, Index(TEMP, 0x03))\n Store (BB04, Index(TEMP, 0x04))\n Store (BB05, Index(TEMP, 0x05))\n Store (BB06, Index(TEMP, 0x06))\n Store (BB07, Index(TEMP, 0x07))\n Store (BB08, Index(TEMP, 0x08))\n Store (BB09, Index(TEMP, 0x09))\n Store (BB0A, Index(TEMP, 0x0A))\n Store (BB0B, Index(TEMP, 0x0B))\n Store (BB0C, Index(TEMP, 0x0C))\n Store (BB0D, Index(TEMP, 0x0D))\n Store (BB0E, Index(TEMP, 0x0E))\n Store (BB0F, Index(TEMP, 0x0F))\n Store (BB10, Index(TEMP, 0x10))\n Store (BB11, Index(TEMP, 0x11))\n Store (BB12, Index(TEMP, 0x12))\n Store (BB13, Index(TEMP, 0x13))\n Store (BB14, Index(TEMP, 0x14))\n Store (BB15, Index(TEMP, 0x15))\n Store (BB16, Index(TEMP, 0x16))\n Store (BB17, Index(TEMP, 0x17))\n Store (BB18, Index(TEMP, 0x18))\n Store (BB19, Index(TEMP, 0x19))\n Store (BB1A, Index(TEMP, 0x1A))\n Store (BB1B, Index(TEMP, 0x1B))\n Store (BB1C, Index(TEMP, 0x1C))\n Store (BB1D, Index(TEMP, 0x1D))\n Store (BB1E, Index(TEMP, 0x1E))\n Store (BB1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBB, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BB00)\n Store (DerefOf(Index(TEMP, 0x01)), BB01)\n Store (DerefOf(Index(TEMP, 0x02)), BB02)\n Store (DerefOf(Index(TEMP, 0x03)), BB03)\n Store (DerefOf(Index(TEMP, 0x04)), BB04)\n Store (DerefOf(Index(TEMP, 0x05)), BB05)\n Store (DerefOf(Index(TEMP, 0x06)), BB06)\n Store (DerefOf(Index(TEMP, 0x07)), BB07)\n Store (DerefOf(Index(TEMP, 0x08)), BB08)\n Store (DerefOf(Index(TEMP, 0x09)), BB09)\n Store (DerefOf(Index(TEMP, 0x0A)), BB0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BB0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BB0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BB0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BB0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BB0F)\n Store (DerefOf(Index(TEMP, 0x10)), BB10)\n Store (DerefOf(Index(TEMP, 0x11)), BB11)\n Store (DerefOf(Index(TEMP, 0x12)), BB12)\n Store (DerefOf(Index(TEMP, 0x13)), BB13)\n Store (DerefOf(Index(TEMP, 0x14)), BB14)\n Store (DerefOf(Index(TEMP, 0x15)), BB15)\n Store (DerefOf(Index(TEMP, 0x16)), BB16)\n Store (DerefOf(Index(TEMP, 0x17)), BB17)\n Store (DerefOf(Index(TEMP, 0x18)), BB18)\n Store (DerefOf(Index(TEMP, 0x19)), BB19)\n Store (DerefOf(Index(TEMP, 0x1A)), BB1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BB1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BB1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BB1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BB1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BB1F)\n }\n end; into device label EC0 code_regex BDA2,\s+256 replace_matched begin //BDA2, 256,\n BB00,8,BB01,8,BB02,8,BB03,8,\n BB04,8,BB05,8,BB06,8,BB07,8,\n BB08,8,BB09,8,BB0A,8,BB0B,8,\n BB0C,8,BB0D,8,BB0E,8,BB0F,8,\n BB10,8,BB11,8,BB12,8,BB13,8,\n BB14,8,BB15,8,BB16,8,BB17,8,\n BB18,8,BB19,8,BB1A,8,BB1B,8,\n BB1C,8,BB1D,8,BB1E,8,BB1F,8\n end; into method label SMBR code_regex \(BDA2, replaceall_matched begin (RDBB(), end; into method label SMBR code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex \(BDA2, replaceall_matched begin (RDBB(), end; # additional work for _BIX method present in some ASUS laptops into device label EC0 code_regex B0C3,\s+16 replace_matched begin XC30,8,XC31,8 end; into device label EC0 code_regex B1C3,\s+16 replace_matched begin YC30,8,YC31,8 end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B0C3, replaceall_matched begin (B1B2(^^LPCB.EC0.XC30,^^LPCB.EC0.XC31), end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B1C3, replaceall_matched begin (B1B2(^^LPCB.EC0.YC30,^^LPCB.EC0.YC31), end; into_all method label _BIX code_regex \(B0C3, replaceall_matched begin (B1B2(XC30,XC31), end; # or could remove the _BIX method if it turns out not to work #into_all method label _BIX remove_entry; #fix logic error in some newer ASUS DSDTs (issue #23) into method label FBST code_regex If\s\(CHGS\s\(Zero\)\)[\s]+\{[\s]+Store\s\(0x02,\sLocal0\)[\s]+\}[\s]+Else[\s]+\{[\s]+Store\s\(One,\sLocal0\)[\s]+\} replaceall_matched begin If (CHGS (Zero))\n {\n Store (0x02, Local0)\n }\n Else\n {\n Store (Zero, Local0)\n } end;  
      USB 3.0 & Instant wake fix
      #Maintained by: RehabMan for: Laptop Patches #usb_prw_0x0d_xhc.txt # remove _PRW methods to prevent instant wake # delete any existing XHC1 device into device label XHC1 name_adr 0x00140000 remove_entry; # delete any existing USB2 device into device label USB2 name_adr 0x001D0000 remove_entry; # if _PRW objects are methods into method label _PRW parent_adr 0x001D0000 remove_entry; into method label _PRW parent_adr 0x001A0000 remove_entry; into method label _PRW parent_adr 0x00140000 remove_entry; into method label _PRW parent_adr 0x001B0000 remove_entry; # some other LAN cards use 0x00190000 into method label _PRW parent_adr 0x00190000 remove_entry; # if _PRW methods are stuffed into a separate scope into method label _PRW parent_label _SB.PCI0.EHC1 remove_entry; into method label _PRW parent_label _SB.PCI0.EHC2 remove_entry; into method label _PRW parent_label _SB.PCI0.XHC remove_entry; into method label _PRW parent_label \_SB.PCI0.EHC1 remove_entry; into method label _PRW parent_label \_SB.PCI0.EHC2 remove_entry; into method label _PRW parent_label \_SB.PCI0.XHC remove_entry; # if _PRW objects are names into device name_adr 0x001D0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x001A0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x00140000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x001B0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x00190000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\}\) remove_matched; # some _PRW have three entries in the Package into device name_adr 0x001D0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x001A0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x00140000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x001B0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x00190000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\n.*\}\) remove_matched; # seems to work better if _PRW is present, but returns 0 (original was 3) for sleep state into device name_adr 0x001D0000 insert begin Name(_PRW, Package() { 0x0D, 0 }) end; into device name_adr 0x001A0000 insert begin Name(_PRW, Package() { 0x0D, 0 }) end; into device name_adr 0x00140000 insert begin Name(_PRW, Package() { 0x0D, 0 }) end; into device name_adr 0x001B0000 insert begin Name(_PRW, Package() { 0x0D, 0 }) end; into device name_adr 0x00190000 insert begin Name(_PRW, Package() { 0x0D, 0 }) end; # USB property injection for 7-series boards (originally HM76) # Insert Apple USB properties into EHC1 into method label _DSM parent_adr 0x001D0000 remove_entry; into device name_adr 0x001D0000 insert begin Method (_DSM, 4, NotSerialized)\n {\n If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n Return (Package()\n {\n "subsystem-id", Buffer() { 0x70, 0x72, 0x00, 0x00 },\n "subsystem-vendor-id", Buffer() { 0x86, 0x80, 0x00, 0x00 },\n "AAPL,current-available", 2100,\n "AAPL,current-extra", 2200,\n "AAPL,current-extra-in-sleep", 1600,\n "AAPL,device-internal", 0x02,\n "AAPL,max-port-current-in-sleep", 2100,\n })\n }\n end; # Insert Apple USB properties into EHC2 into method label _DSM parent_adr 0x001A0000 remove_entry; into device name_adr 0x001A0000 insert begin Method (_DSM, 4, NotSerialized)\n {\n If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n Return (Package()\n {\n "subsystem-id", Buffer() { 0x70, 0x72, 0x00, 0x00 },\n "subsystem-vendor-id", Buffer() { 0x86, 0x80, 0x00, 0x00 },\n "AAPL,current-available", 2100,\n "AAPL,current-extra", 2200,\n "AAPL,current-extra-in-sleep", 1600,\n "AAPL,device-internal", 0x02,\n "AAPL,max-port-current-in-sleep", 2100,\n })\n }\n end; # Insert Apple USB properties into USB 3.0 XHC into method label _DSM parent_adr 0x00140000 remove_entry; into device name_adr 0x00140000 insert begin Method (_DSM, 4, NotSerialized)\n {\n If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n Return (Package()\n {\n "subsystem-id", Buffer() { 0x70, 0x72, 0x00, 0x00 },\n "subsystem-vendor-id", Buffer() { 0x86, 0x80, 0x00, 0x00 },\n "AAPL,current-available", 2100,\n "AAPL,current-extra", 2200,\n "AAPL,current-extra-in-sleep", 1600,\n "AAPL,device-internal", 0x02,\n "AAPL,max-port-current-in-sleep", 2100,\n })\n }\n end; # special cases... (not in u430 DSDT) #into scope label _SB.PCI0.XHC.RHUB.HS05 set_label begin _SB.PCI0.XHC1.RHUB.HS05 end; - Finally, click in "Compile" to check for errors.
      - If you get the error Object does not exists (\_SB.PCI0.XHC1) remove the 1 and try compile again.
      - Close and reboot.
       
      Last thing
       
      Run this command in Terminal to disable hibernation (doesn't work in macOS):
      sudo pmset -a hibernatemode 0  
       
      It's done!
       
       
      System Updates
       
      10.15.2
       
      Before install, update the following kexts:
      - Lilu.kext. I used version 1.4.0.
      - WhateverGreen.kext. I used version 1.3.5.
      - AppleALC.kext. I used version 1.4.4.
      - VoodooPS2Controller.kext. I used version 2.1.0.
      (all download links above)
       
      Download the latest CLOVERX64.efi.zip build. I used version 5100.
      Mount EFI partition and unzip to:
      - /Volumes/EFI/EFI/CLOVER/CLOVERX64.efi
      - /Volumes/EFI/EFI/BOOT/BOOTX64.efi (rename the copy of CLOVERX64.efi to BOOTX64.efi
       
      Install update. Will reboot at least four time.
       
       
      10.15.4

       
      Before install, update the following kexts:
      - Lilu.kext. I used version 1.4.2.
      - WhateverGreen.kext. I used version 1.3.7.
      - AppleALC.kext. I used version 1.4.7.
      - VoodooP2Controller.kext. I used versions 2.1.2.
      - VirtualSMC.kext. I used version 1.3.7.
      - Legacy Video Patch (If Core i3 machine)
      (all download links above)
       
      Download the latest CLOVER installer. I used version 5107.
      - Install respecting the configuration mentioned above in "Install bootloader" section.
       
      Install update. Will reboot at least four time.
       
       
       

      And last but not least

      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas, @"Sniki", @Mieze, @headkaze and all others members involved directly or indirectly.
       
       
      Attachments
       
      config.plist
      SSDTs v3.zip
      USBPorts.kext.zip
      VoodooPS2Controller.kext.zip
      Filevault 2 additional drivers.zip
      AtherosE2200Ethernet.kext v2.zip
       
×