Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

5,393 posts in this topic

Recommended Posts

Advertisement

already set but doesn't work

use ur olde clover folder, put DSDT and hotpatches in ur old clover folder

 

GFX0 to IGPU
47465830 
49475055 
 
HDAS to HDEF
48444153 
48444546 
 
HECI to IMEI
48454349 
494d4549 

Share this post


Link to post
Share on other sites

Lego

check

replace DSDT in Clover/Acpi/Patched and use Vodoohda from folder

attachicon.giflenovo16HD AUDIO.zip

AppleAlc work in onboard audio and voodoohda work only in HDMI audio(i add id from ur GPU)

let me know if work

 

Use AppleAlc + Lilu + Voodoohda(voodoohda from my folder)

the system keeps rebooting after trying to boot now.

I have managed to boot with -s and the sound works now with my displayport which i want that :) Im not using udmi.. but it shows strange as in the picture below.

post-2203208-0-46339700-1516229657_thumb.png

Share this post


Link to post
Share on other sites

the system keeps rebooting after trying to boot now.

I have managed to boot with -s and the sound works now with my displayport which i want that :) Im not using udmi.. but it shows strange as in the picture below.

run kextutility one time

Kext Utility.app.zip

 

u can use all kexts in clover/kexts/other, voodoohda too

 

use kexts there, if u have kexts installed in L/E or S/L/E, remove and run kext utility

Ye, voodoohda inject all

 

u dont use onboard audio?

Share this post


Link to post
Share on other sites

run kextutility one time

attachicon.gifKext Utility.app.zip

 

u can use all kexts in clover/kexts/other, voodoohda too

 

use kexts there, if u have kexts installed in L/E or S/L/E, remove and run kext utility

Ye, voodoohda inject all

 

u dont use onboard audio?

Reboot issue is solved now.

yes i dont use onboard audio

Share this post


Link to post
Share on other sites

attachicon.gifCLOVER.zip

send me one ioreg after reboot

attachicon.gifIORegistryExplorer.app.zip

 

 

Thank you. I have attached the IORegistry. I hope I did it correctly. 

 

Sometimes the PC resumes from sleep to a black screen and sometimes it resumes with a frozen screen. Unplugging then reconnecting the display ports fixes it. Is there any solution for this?

Renegaid’s iMac.zip

Share this post


Link to post
Share on other sites

Reboot issue is solved now.

yes i dont use onboard audio

;)

Thank you. I have attached the IORegistry. I hope I did it correctly. 

 

Sometimes the PC resumes from sleep to a black screen and sometimes it resumes with a frozen screen. Unplugging then reconnecting the display ports fixes it. Is there any solution for this?

U can try a previous version

NvidiaGraphicsFixup_1.2.1.kext.zip

Share this post


Link to post
Share on other sites

Ok I will try. Was the IO fine? There is one item that says no driver. Intel Corporation Series Chipset MEI Controller.

Load only if u use IntelHD Graphics ;)

Share this post


Link to post
Share on other sites

Lego

check

replace DSDT in Clover/Acpi/Patched and use Vodoohda from folder

attachicon.giflenovo16HD AUDIO.zip

AppleAlc work in onboard audio and voodoohda work only in HDMI audio(i add id from ur GPU)

let me know if work

 

Use AppleAlc + Lilu + Voodoohda(voodoohda from my folder)

Do u can share how u add id from GPU use HDMI audio?

tks u

Share this post


Link to post
Share on other sites

Do u can share how u add id from GPU use HDMI audio?

tks u

here

01.png

02.png

Onboard with AppleAlc, HDMI nVidia Pascal with VoodooHda, avoid sleep problems, bad sound

MaLd0n 2018-01-18 às 01.21.49.png

VoodooHda edited, just add ur id in IOPCIPrimaryMatch

VoodooHDA.kext.zip

Share this post


Link to post
Share on other sites

 

use ur olde clover folder, put DSDT and hotpatches in ur old clover folder

 

GFX0 to IGPU

47465830

49475055

 

HDAS to HDEF

48444153

48444546

 

HECI to IMEI

48454349

494d4549

seems to be working now! Probably the issue was a recent bios update to F8b, i downgraded to F7 version. Thank you!

Share this post


Link to post
Share on other sites

 

take a test

attachicon.gifDSDT.gigibatt.zip

 

Hey Maldon, thanx for the file! I 

I have problems with the prelinked kernel permissions (it's not due to your DSDT), I think I'll have to format and redo a clean install. since I will change a few things and use the APFS format I wanted to know if I can try anyway with this attachment or if it is better to send you a new clean DSDT and redo everything from scratch.

Share this post


Link to post
Share on other sites

seems to be working now! Probably the issue was a recent bios update to F8b, i downgraded to F7 version. Thank you!

updated bios and send me original dsdt extract from new bios

 

take a test

attachicon.gifDSDT.gigibatt.zip

 

Hey Maldon, thanx for the file! I 

I have problems with the prelinked kernel permissions (it's not due to your DSDT), I think I'll have to format and redo a clean install. since I will change a few things and use the APFS format I wanted to know if I can try anyway with this attachment or if it is better to send you a new clean DSDT and redo everything from scratch.

 

use all kexts in Library/Extensions

 

put all kexts there and run KextUtility

Share this post


Link to post
Share on other sites

 

u can try generate one ssdt for check if work

attachicon.gifssdtPRGen.command.zip

 

u need a minimal freq 800mhz

check

attachicon.gifpost-557433-0-61837400-1495583313.png

Put two files in ur desktop and run .command

attachicon.gifAppleIntelInfo.zip

after, open terminal and run it some times

sudo cat /tmp/AppleIntelInfo.dat

Thanks for the suggestion, but SSDT generated with latest ssdtPRGen seems get worse. In fact now I've problem with Sleep/Wake (black screen instead of sleeping and crash on wake) and anyway CPU never reach 800Mhz.

 

I've also tried without ur DSDT and without PluginType or any other Table dropping... a baseline system... and seems that in that situation CPU reach 800Mhz as you can see here:

post-319277-0-66326200-1516282287_thumb.png

 

but PM seems however not enabled because X86PlatformPlugin is not present under CPU0@0 in IOReg

post-319277-0-84594300-1516282461_thumb.png

 

Any suggestion?

Share this post


Link to post
Share on other sites

Thanks for the suggestion, but SSDT generated with latest ssdtPRGen seems get worse. In fact now I've problem with Sleep/Wake (black screen instead of sleeping and crash on wake) and anyway CPU never reach 800Mhz.

 

I've also tried without ur DSDT and without PluginType or any other Table dropping... a baseline system... and seems that in that situation CPU reach 800Mhz as you can see here:

attachicon.gifGadget-Baseline.png

 

but PM seems however not enabled because X86PlatformPlugin is not present under CPU0@0 in IOReg

attachicon.gifSchermata 2018-01-18 alle 14.33.36.png

 

Any suggestion?

Yes, dont work without it

post ur full clover folder in use

Share this post


Link to post
Share on other sites

Seems to be working. Hibernation works. Thank you. Since I installed High Sierra, the system hangs for about 5 seconds. How can i solve it?

U can try a new driver? AptioMemoryFix

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By pilo2300
      Hi, I'm receiving these two errors before the system automatically reboots.
      36:296 00:063 OCSMC: SmcReadValue Key 4D535463 Size 1 36:351 00:054 OCSMC: SmcReadValue Key 4D534163 Size 2  
      Using OpenCore 0.5.7, Mojave 10.14.6 installed successfully (from USB, but have not gone through OS setup ie. 'select your country' screen yet) but now selecting the Mojave drive in the boot picker results in the above error.
      Hardware is Gigabyte H77-DS3H, Core i7 3770 (Ivy Bridge), Radeon Sapphire RX 580 Pulse, 16GB DDR3 ram.
       
      I had a fully working 10.14.4 install running OC 0.5.6 prior to this.

      OpenCore log and config.plist (with SMBIOS serials etc removed) attached - any help greatly appreciated.
       
      Thank you.
      opencore-2020-04-08-000853.txt
      config.plist
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Current EFIs 
      Updated 06/04/2020
      PLEASE NOTE - You MUST update to the latest Clover EFI before updating to 10.15.4 or you may find your unable to update.
       
      Clover EFI Updated 06/04/20 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      Clover Z390 Master Navi Vega 19,1 EFI 060420.zip - Vega, Navi (5700, 5700XT etc), Radeon VII DSDT EFI
      Clover Z390 Master Polaris 19,1 EFI 060420.zip - R5xx Polaris DSDT EFI
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - OpenCore v0.5.7, No DSDT and Done the way OpenCore intended it (06/04/2020)
       

      Alternative EFI 2 - N-D-K OpenCore v0.5.7 (06/04/2020)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       

       

       

       

       

       

       

       
    • By MaLd0n
      Install MacOS with Olarila Image, Step by Step, Install and Post Install  
      https://www.olarila.com/topic/5794-hackintosh-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Paste my EFI folder into EFI partition  EFI GA H110M-S2.zip     --Install Sierra/High Sierra and boot into system!   Post Installation   --Paste my EFI folder into EFI partition  EFI GA H110M-S2.zip     --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with Skylake patches DSDT.GA H110M-S2.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By cixque
      CLOVER.zipCLOVER.zipDell Venue 11 Pro 7140
      ------------
      Specification
       
       
      Intel Core M 5Y71
       
      Intel HD Graphics 5300
       
      Intel Broadwell-U motherboard
       
      8GB Ram
       
      256GB SSD
       
      Dell DW1850e WWAN + GNSS GPS
       
      Intel Wireless 7265 + Intel Bluetooth
       
      NFC
       
       
      …..
       
       
       
       
       
      Mojave 10.14.6
       
      What works
      Native Power Manager (Generate Plugin type) Full Graphics with QE/CL Brightness (Add PNLF in Config.plist or DSDT Patch) — (Brightness slide bar) Touch Screen, and Pen (DSDT Patch + Voodoo I2C, I2CHID satellite KEXT) HDMI output with hot plug (Lilu + WhateverGreen) HDMI Audio with hot plug (Lilu + AppleALC) no Layout-id needed Front and Rear Cameras MicroSD slot - O2 Micro (I use Adding Arbitrary under Devices in Config file Method) Ref, Post #6 by Jake Jo https://osxlatitude.com/forums/topic/7346-applesdxc-driverdsdt-patch-for-o2-micro-sd-card-readers/ Battery Indicator (ACPIbattery by Rehabman) ——>To utilise both battery, SSDT (by Rehabman) is needed in order to combine 2 batteries as one.
      Travel Keyboard Dell K12a001 (USBinjectall KEXT) Native Keyboard keys (Brightness, volume keys) WWAN card Dell DW1850e (OOB) Bluetooth -------------------
       
      What doesn’t work
       
       
      Sleep Wake — I have no idea how to fix it as it is required DSDT patch I guess. GPS NFC Audio ---> Realtek I2S Audio (PG0.35 for DELL)
       
      In DSDT entries is HDAUDIO\\FUNC_01&VEN_10EC&DEV_0282&SUBSYS_00000000&REV_1000\ Which indicates ALC282
       
      Audio ALC3263 (As it shown in BIOS) - Broadwell rt286 - Card1/Codec#0 (Utilised in I2S Mode) there is nowhere in BIOS to change to HDA mode). Drop OEM HDA and Fix HDA don’t do anything, still show 3 HDMI Audio outputs. If there is a DSDT patch to force HDA Audio mode, Please do enlighten me.
      As a result Internal Speaker, Internal Mic, and Headphone Jack doesn’t work.
       
      Touchpad on Travel Keyboard Dell K12a001 (Should work with DSDT Patch with pin configuration) I have no idea how. Obviously, Intel Wireless 7265 AC. For experimental purpose. https://github.com/daliansky/XiaoMi-Pro-Hackintosh/issues/330 — Knock yourself out. I managed to get it work for awhile but the real problem is kernel panic so I gave up. Ordering compatible card instead. ------------------
       
      Config.plist got it from Rehabman laptop config.
       
       
      BIOS version A20
       
      Enable:
       
      - Legacy Boot Rom
       
      Disable:
       
      - Secure Boot
       
      - TPM 2.0
       
      - Vt-d
       
      ------------
       
      SMBIOS - I use MacBook8,1. —- MacBookAir7,1-7,2 (Min Freq is at 1.2 GHz) MacBookPro12,1 Min Freq is at 800 Mhz and it is the default this cpu should be. Again, there is a way to set it right somewhere in this forum.
       
      ------------
       
      -->> DSDT Windows 8 patch
       
      System sees only one I2C Controller which control Touch Screen.
      Touch Screen registers as Magic Trackpad 2.
      Pen as Mouse
       
      -->> DSDT Windows 8.1 Patch
       
      System sees two I2C Controllers which control Touch Screen and Accelerometer.
      Touch Screen registers as Magic Trackpad 2.
      Pen as Mouse
       
      OOO>>> With Windows 8.1 patch which it should run with this one because it can see more of HID devices and controllers.
       
      Problem is Accelerometer (SHUB).
      Device can automatically rotate screen as it should be BUT it flips the screen wildly even with slightly movement. It stops only when device stays completely still. Eventually it breaks internal screen graphic. It becomes grabble. I restored internal screen graphic by connecting it to external monitor and set rotation of external screen to 0 degree. Then it is back to normal. (I guess it conflict with rotation setting) I disable SHUB in DSDT.
       
      ---------------------
       
      During Installation process Full Graphic acceleration can be activated straight away by Lilu and Whatevergreen. AppStore, iMessage and, FaceTime activate by NullEthernet and SSDT by Rehabman USBInjectAll needed for keyboard and other usb peripherals. Use other tool to keep certain ports active as Rehabman mention this KEXT is not good for a long run. Please do Correct me if I did something worng. Or any suggestions to make this thing runs better.
      CLOVER.zip
      IOReg_SysReport.zip
×