Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

5,103 posts in this topic

Recommended Posts

corint1, on 01 Nov 2017 - 7:33 PM, said:snapback.png

 

corint1, on 01 Nov 2017 - 6:11 PM, said:snapback.png

zip.gif  CLOVER.zip   2.39MB   1 downloads

 

with this clover lost hdmi sound on first monitor ...only DP are with sound ... it's possible to have sound without voodoo kext on booth hdmi and DP ?

 

native HDMI only in DP in Pascal line

 

 

 

sorry but boot on ONLY with DP no sound... sound in HDMI ... if boot only HDMI no sound....sound in DP .... if boot with boot DP with HDMI sound when in DP ,when in HDMI ...more times in DP ... what can I do ? thank you

Share this post


Link to post
Share on other sites
Advertisement

if u use HighSierra, check patch usb in config.plist for HS

attachicon.gifCLOVER.zip

why u dont use on the fly patch instead terminal command? :|

 

just remove _prw from devices, is a very old problem and patch

attachicon.gifCLOVER.zip

attachicon.gifCLOVER.zip

attachicon.gifCLOVER.zip

attachicon.gifDSDT.leeroye.zip

 

Thanks for your reply Mald0n, first time I put your DSDT and after reboot I was stucked on the first lines with the symbols: ++++++++++++++++++++++++++++++++++++++

 

Later, I try to "replicate" your configurations one by one and doing some reboots. Now seems that all works well, but I don't see too much difference between with DSDT and w/o DSDT. Could you post the changes that you made? and... Is there any way to check fixes of DSDT? I mean, for example, sleep/wake are not working at the moment.

Share this post


Link to post
Share on other sites

Hi MaLd0n,

Thanks for the new Clover folder, but there was no change, the video coming from the monitor after 50% is cut off when mac-os is loading.

 
I replaced the bootx64.efi file in my old clover 4184 folder. I can do normal boot like this, otherwise I can not get display without doing nv_disable = 1.

Share this post


Link to post
Share on other sites

Thanks for your reply Mald0n, first time I put your DSDT and after reboot I was stucked on the first lines with the symbols: ++++++++++++++++++++++++++++++++++++++

is a clover driver, use OsxAptioFixDrv-64.efi or 2

 

u need to check what probvelm cause sleep fail

log show --style syslog | fgrep "Wake reason"

 

Hi MaLd0n,

 

Thanks for the new Clover folder, but there was no change, the video coming from the monitor after 50% is cut off when mac-os is loading.

 
I replaced the bootx64.efi file in my old clover 4184 folder. I can do normal boot like this, otherwise I can not get display without doing nv_disable = 1.

 

use search forum for video problem in sierra 10.12.6

Share this post


Link to post
Share on other sites

use voodoohda

is not a solution ... sound have a delay ... strange is how it is change ...when is on hdmi , when on dp ... 

Share this post


Link to post
Share on other sites

is not a solution ... sound have a delay ... strange is how it is change ...when is on hdmi , when on dp ... 

yes

the problem is web driver, if u use serie 9xx nvidia e.g, work perfect

read about it

Share this post


Link to post
Share on other sites

is a clover driver, use OsxAptioFixDrv-64.efi or 2

 

u need to check what probvelm cause sleep fail

log show --style syslog | fgrep "Wake reason"

use search forum for video problem in sierra 10.12.6

 

The log is empty. I click on the sleep, the computer sleeps well and later, I click on the mouse but the computer doesn't wake (black screen and finally, it restarts).

 

About .efi files, I have OsxAptioFixDrv-64 and OsxAptioFix2Drv-64 on the same folder because someone tell me that Clover takes only one and not cause any problem. Is it right?

 

Thanks Mald0n!  :)

Share this post


Link to post
Share on other sites

Hi,

 

I am trying to to resolve my sleep/wake issue on HS (17A405) and I am falling to get a DSDT which works. 

 

My sleep/wake is intermittent, sometime it works but more often than not, when the OS goes to sleep, the machine stays on ( I can hear the fan, the case light are on...) but the display is off and it's impossible to wake the rig. 

 

Beside this issue everything works, Audio, graphic with 2x GPU SLI mode, ethernet (no wifi), USB3. CPU (ssdt generated) 

 

Can anybody help me to get a DSDT for my system?

 

As suggested by MaLd0n in the first post, I have attached my clover order  and the IOREG  Run it output. 

 

Cheers Guys!!

 

 

 

-----------------------------------------------------------------------------------------------------------

 

Asrock Z270 Super Carrier //  i7 7700k @ 4.2Ghz // 2x NVIDIA GeForce GTX 1080 8 GB (SLI) // Crucial MX300 1TB SSD

Send me Mourrr iMac.zip

CLOVER.zip

Share this post


Link to post
Share on other sites

The log is empty. I click on the sleep, the computer sleeps well and later, I click on the mouse but the computer doesn't wake (black screen and finally, it restarts).

 

About .efi files, I have OsxAptioFixDrv-64 and OsxAptioFix2Drv-64 on the same folder because someone tell me that Clover takes only one and not cause any problem. Is it right?

 

Thanks Mald0n!  :)

check in boot what driver clover use, use only one

 

sleep problem, try with darkwake options

Hi Mr Maldon,

 

Thank you really for your help and your knowledge, my DSDT is perfect one my hackintosh, thank you again :thumbsup_anim:

Welcome

Enjoy

Hi,

 

I am trying to to resolve my sleep/wake issue on HS (17A405) and I am falling to get a DSDT which works. 

 

My sleep/wake is intermittent, sometime it works but more often than not, when the OS goes to sleep, the machine stays on ( I can hear the fan, the case light are on...) but the display is off and it's impossible to wake the rig. 

 

Beside this issue everything works, Audio, graphic with 2x GPU SLI mode, ethernet (no wifi), USB3. CPU (ssdt generated) 

 

Can anybody help me to get a DSDT for my system?

 

As suggested by MaLd0n in the first post, I have attached my clover order  and the IOREG  Run it output. 

 

Cheers Guys!!

 

 

 

-----------------------------------------------------------------------------------------------------------

 

Asrock Z270 Super Carrier //  i7 7700k @ 4.2Ghz // 2x NVIDIA GeForce GTX 1080 8 GB (SLI) // Crucial MX300 1TB SSD

ASROCK have serious problem with sleep

CLOVER.zip

Thanks Maldon works fine on the Machine

Welcome!

Enjoy!

Share this post


Link to post
Share on other sites

check in boot what driver clover use, use only one

 

sleep problem, try with darkwake options

 

I deleted OsxAptioFixDrv-64.efi

Also, I tried all the darkwake flags, and with darkwake=1/2/8 wake works but without graphics acceleration and with some black rendering. I attached a video for you.

 

Really thanks for your replies, I will send you some beers soon for this help  :wink_anim:

darkwake-video.zip

Share this post


Link to post
Share on other sites

Hi Sir MALDON

 

My Specs

 

Laptop

 

Acer Aspire ES 15 ES1-572-321G (core i3 7100u)

 

intel HD 620

 

Ram 4GB DDR4 2400mhz 

 

1tb hard drive sata

 

Usb not booting acpi and usb errors
 

 

iam installing Mac os Sierra 10.12.5 plz help me
 

under clover/acpi/origin DSDT and SSDT

 

my CLOVER>zip Attached

 
 
 

CLOVER.zip

Share this post


Link to post
Share on other sites

Hey there, MaLd0n!

 

So I am trying to disable my discrete graphics on my high sierra install since I am unable to boot into it with my discrete card plugged in. Taking out my card every time I want to boot into Windows isn't an ideal situation :P

 

I am currently using a mish mash of things which can be found in my attachment.

 

My questions are: With the DSDT I downloaded from here - do I need all of the patches inside of config.plist? Did I even stick the DSDT in the right spot? (/EFI/Clover/ACPI/Patched) How would I go about disabling my discrete graphics card?

 

Thanks!

 

MB: GA-Z270X-Gaming K5, Proc: i7 7700K, iGFX: Intel 630, dGFX: XFX Radeon R9 390

Share this post


Link to post
Share on other sites

Hi Mald0n,

 

I need a new DSDT I think, I tried to patch myself but since I updated my BIOS but the online patches are no longer available. I never really got the onboard audio working and used USB instead, hopefully you can help, I attached the Send me files.

 

Thanks!

Send me hayaku.zip

Share this post


Link to post
Share on other sites

check in boot what driver clover use, use only one

 

sleep problem, try with darkwake options

Welcome

Enjoy

ASROCK have serious problem with sleep

attachicon.gifCLOVER.zip

Welcome!

Enjoy!

Thanks MaLd0n, yeah gave it a go, no joy! seems I gonna have to invest in a Gigabyte board! 

Share this post


Link to post
Share on other sites

 

First...
If you need DSDT edits for SkyLake, KabyLake or Coffee Lake...
-Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen)
-Post Ioreg, extract with Ioreg Explorer
-Run it, post files generate in your desktop
Installation
 
--Create a bootable copy of macOS Sierra
Check out the link
 
--Create a bootable copy of macOS HighSierra
Check out the link
 
--Install Clover in USB stick
 
--Replace with my Clover folder 
 
--Install Sierra/High Sierra and boot into system!
Post Installation
 
--Install Clover in SSD and replace with my folder
 
*Check USB port limit patch in config.plist
 
--Reboot and activate video!
 
-Nvidia WebDriver Sierra
-Nvidia WebDriver High Sierra
-Cuda
 
Bingo!
 
My mobo is Gigabyte GA Z270 Gaming K3, if you have other mobo, post your files here, i apply all patches for you! Read above! 
--DSDT mobo GA Z270 Gaming K3
My DSDT with patches for KabyLake
 
Patches
-FIX ERRORS AND WARNINGS
-HPET
-SATA
-DMAC
-SLPB
-DARWIN
-LPC
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-RTC
-IRQs
-SBUS
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-LAN
-USBX
-PMCR
-IMEI
-EC
-PNLF
-HDMI NVIDIA / ATI
--SSDT
Generate your SSDT for PM, use ssdtPRGen by Piker-Alpha
run in terminal
curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh
chmod +x ~/ssdtPRGen.sh
sudo ~/ssdtPRGen.sh
 
--install Lan driver by Mieze
 
-Atheros
 
-Intel
 
-Realtek
 
--Links
 
-Audio
 
-USB
 
It's time to Rockattachicon.gifguitar.gif
 
-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
 
Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!
 
We're all here to have fun and learn from each other!
 
ENJOY!

 

hello mald0n can you help me to fix my dsdt and ssdt, and I got a problem to disable Nvidia , this is my clover, ioreg, and zip from runme,app 

thank you mald0n

Robby's MacBook.zip

Share this post


Link to post
Share on other sites

Hello MaLd0n,

 

I'm with a GA z270X UD5 + i7700 + Nvidia 1030.

Get a lot of problems with sleep/wake, slow boot.

Tried to patch DSDT myself with no luck ... just want to optimize my Hackint0sh to be quicker and more realiable than my 7 years old iMac:-)

 

Can you have a look at my attached files,

 

Thks a lot,

 

Cheers,

Greg

Send me Greg’s iMac.zip

ssdtPRGen.zip

Clover.zip

Share this post


Link to post
Share on other sites

Hi Mald0n,

 

I need a new DSDT I think, I tried to patch myself but since I updated my BIOS but the online patches are no longer available. I never really got the onboard audio working and used USB instead, hopefully you can help, I attached the Send me files.

 

Thanks!

need untouched DSDT

hello mald0n can you help me to fix my dsdt and ssdt, and I got a problem to disable Nvidia , this is my clover, ioreg, and zip from runme,app 

thank you mald0n

Check ur ioreg

I think in RP01/PEGP

Check

SSDT-Disable_DGPU.aml.zip

Share this post


Link to post
Share on other sites

Hello MaLd0n,

 

I'm with a GA z270X UD5 + i7700 + Nvidia 1030.

Get a lot of problems with sleep/wake, slow boot.

Tried to patch DSDT myself with no luck ... just want to optimize my Hackint0sh to be quicker and more realiable than my 7 years old iMac:-)

 

Can you have a look at my attached files,

 

Thks a lot,

 

Cheers,

Greg

Clover.zip

Hi MaLd0n,

 

Thank you for starting this helpful thread and taking the time to help others. Would you be so kind and have a look at my DSDT and SSDTs. Any help would be highly appreciated. My Specs are:

MB: GA-Z270N-WIFI

CPU: Core i7 7700

GPU: 1030GT

 

Thanks!

CLOVER.zip

Used 200//MOBO EFI FOLDER.

 

Hangs On Apple Logo.

 

Please Help . I Have Updated my signature :)

Use -v and post a photo

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tonyx86
      I was inspired by @duduclx post for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5.  Everything works perfectly except for sleep.  I'm starting this thread hoping to help others install Mojave on their E6410s and to diagnose and resolve the sleep issue.  This thread is not currently intended to be an installation guide and is better suited to the intermediate/advanced hackintosher.  Eventually, it may evolve into a guide.
       
      I started with this thread (Many thanks, @duduclx !!!) and ended up with the system captured in the attached files.  The keys were to change the LPCB._DSM.Name to "3b09" and remove all CLOVER configs not necessary for Mojave, plus some other items mentioned below.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.5 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 5, not the original version), USBInjectAll (with custom SSDT-UIAC) Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads  No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Sleep (display goes blank, but power light stays on.  System cannot wake and must be forced off with power button) Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings.  The slider appears in Display settings (because of the backlight DSDT injection in AGP.VID._DSM), but the slider doesn't work (yet).  Haven't spent time to figure this out, but would love help. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      SD Card Slot Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS) Camera (I have this disabled in my BIOS)  
      What IS working:
      Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: @PlutoDelic) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter)  
      Known issues and their solutions
      AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  This has been completed and tested, but does not fix the sleep behavior.  This fix is not reflected in the attached files. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European.  The updated VoodooPS2Controller.kext is not reflected in the attached files. This proposed configuration uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior and have not updated attached files to reflect this change. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly.  I have made this change and am testing it on my system, but have not updated the attached configuration files. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The DSDT patch that duduclx refers to as "Intel GMA Ready" in his El Capitan Guide is not applied correctly to the DSDT attached to this post.  Somehow, the contents of patched _DSM are located in the PCI0.VID device instead of in Method (_DSM) within the PCI0.VID device.  MaciASL didn't complain about this, so it went unnoticed, but it doesn't appear to have had any affect.  I have completely removed this "Intel GMA Ready" patch from my DSDT since it is not necessary for Dell Latitude E6410's with NVidia 3100m, but have not updated the attached DSDT. The assigned value of ACOS in the DSDT is conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc), analogous to the assignment of OSYS.  I made this change in my DSDT (not yet reflected in the attached files), but have not observed any behavioral differences (sleep or otherwise).  EDIT: Another way to handle this might be to override _OSI with XOSI (defined in a custom SSDT).  Still learning about XOSI and haven't yet drawn a conclusion.  I'm currently experimenting with ACOS and OSYS equivalent to Win7 and Linux (manually patched in my DSDT which has not yet been updated as a new attachment to this post). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  I believe that this should be an internal USB port (portType=2).  My custom SSDT-UIAC.dsl is wrong.  I just learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  I have not attached an updated SSDT-UIAC.aml to this first post, but my current EFI includes an updated SSDT-UIAC.aml with ports HP15, 16 17 and 18 set to internal (portType = 2).  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working.  
      Brief Installation Guide (for the experienced Hackintosher):
      Follow duduclx's guide for BIOS config Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext. Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original) Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z  
       


      CLOVER.zip
    • By r00tdvd
      I have E6540 working almost perfectly fine with Mojave 10.14.5 except for couple of things:-
       
      1- HDMI audio not syncing properly with TV ! I never had that issue.
      2- Webcam is not working and I need it for meetings and stuff.
       
      I have attached my fully working EFI.zip also the clover origin dump E6540_origin.zip files.
       
      I am also wondering is it possible now to get the E6540 to work with the AMD Radeon HD 8790M instead of the Intel(R) HD Graphics 4600 but also get the HDMI working the with TV?
    • By Aldaro
      I have been running macOS Mojave on my system for 3 months and everything was working pretty well.  After taking an update for clover, my entire system got wrecked, and I cannot even boot to an installation environment anymore (which I really need to do since I am starting back at square one).  I still have the old EFI folder backed up, but I know it'll only be a matter of time before Apple introduces an update that requires me to update Clover in order to work correctly.  I have tried all the available memory fixes, but none of them seem to work.  I was previously using the original osxaptiofix; so, I gave v2, and v3 a try, but to no success.  I read somewhere on the main discussion board for clover that AptioMemoryFix was no longer going to be supported and I therefor decided to skip over it (not to mention it isn't even available in newer clover installation packages).
       
      System specs:
      Motherboard: GIGABYTE Z390 M GAMING
      CPU Intel core i5 9600k @ stock 3.7GHz
      RAM 32GB DDR4 2667MHz
      GPU AMD Radeon RX 580 with 8GB of GDDR5
      SSD Intel 660p 512GB NVME
      NIC: Intel i210 10/100/1000 as it is natively supported in macOS
       
      I have been using the iMac 19,1 SMBIOs as I built this machine to match it as close as humanly possible.  As for my UEFI settings, I did the usual:
      Disabled Windows specific features and secure boot
      Enabled XHCI hand off
      Enabled Above 4G decoding
      Disabled onboard NIC since it is made irrelevant by my intel i210
       
      --INJECT KEXTS--
      FakeSMC
      Lilu
      WhateverGreen
      AppleALC
      USBInjectAll -- WITH PATCHED SSDT in /EFI/CLOVER/ACPI/patched
      Below are images of the errors I am receiving when trying to boot the macOS Mojave installer.
       
      with original osxaptiomemoryfix

       
      osxaptiofixv2

       
      osxaptiofixv3

       
      Anyway, if somebody can help me figure out what's going on, that'd be greatly appreciated.  My ultimate goal is to get an install with minimal clover patches as to be better prepared when the winds of change from Apple come roaring.
       
      p.s: I have also attached a copy of my EFI folder
       
       
      EFI.zip
    • By fusion71au
      Clover r4989 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4989 for VMware.zip". Mount Clover-v2.4k-4989-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
×