Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

5,239 posts in this topic

Recommended Posts

Okay, I booted into the installer but it didn't recognize my hard drive so I must need a driver for that. So I plugged in an external hard drive an installed on that no problem. Then I boot into the install usb and boot the external hd from clover, and it boots great! Wi-Fi and audio don't work, and graphics are a little glitchy but it boots :)

 

Sent from my SM-G920V using Tapatalk

Share this post


Link to post
Share on other sites
Advertisement

@MaLd0n on HighSierra i've lost the audio :)

 

what could it be?

@UltraLaser I have the same mobo with you. You need to use next patches in KextsToPatch

<dict>
                <key>Comment</key>
                <string>t1-10.12-AppleHDA/Realtek ALC...</string>
                <key>Disabled</key>
                <true/>
                <key>Find</key>
                <data>
                ihnUEQ==
                </data>
                <key>Name</key>
                <string>AppleHDA</string>
                <key>Replace</key>
                <data>
                AAAAAA==
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>10.12-AppleHDA/Realtek ALC1220A</string>
                <key>Disabled</key>
                <false/>
                <key>Find</key>
                <data>
                ixnUEQ==
                </data>
                <key>Name</key>
                <string>AppleHDA</string>
                <key>Replace</key>
                <data>
                aBHsEA==
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>AppleHDA/Resources/xml>zml</string>
                <key>Disabled</key>
                <false/>
                <key>Find</key>
                <data>
                eG1sLnps
                </data>
                <key>Name</key>
                <string>AppleHDA</string>
                <key>Replace</key>
                <data>
                em1sLnps
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>200_Series_ Audio_Controller</string>
                <key>Disabled</key>
                <false/>
                <key>Find</key>
                <data>
                cKE=
                </data>
                <key>Name</key>
                <string>AppleHDAController</string>
                <key>Replace</key>
                <data>
                8KI=
                </data>
            </dict> 

And 1 audio layout works fine for me. You also need to update AppleALC and boot with -alcbeta and -lilubeta on HighSierra

Share this post


Link to post
Share on other sites

Any help guys? Still trying to get internal hard drive enabled in Sierra installer

 

Sent from my SM-G920V using Tapatalk

why don't you start by providing more detail about your config. For example, put your hardware information in your signature. Is it a SATA hard drive? SSD? m2? etc.

Share this post


Link to post
Share on other sites

Hi guys, I created the pendrive for a new install of Sierra 10.12.6 with the command "createinstallmedia" install Clover v2.4k_r4114 uefi mode, replaced the clover folder with that sent by Mald0n using smbios iMac18 and removing fakecpuid in verbose mode but The installation fails on the IOconsoleUsers error: gIOScreeenLockState 3, hs 0, bs 0, now 0, sm 0x0. I think the error for the hd630 card. Thanks for your help.

My MB is Asus Z270-A with I7700k.

Share this post


Link to post
Share on other sites

Hi guys, I created the pendrive for a new install of Sierra 10.12.6 with the command "createinstallmedia" install Clover v2.4k_r4114 uefi mode, replaced the clover folder with that sent by Mald0n using smbios iMac18 and removing fakecpuid in verbose mode but The installation fails on the IOconsoleUsers error: gIOScreeenLockState 3, hs 0, bs 0, now 0, sm 0x0. I think the error for the hd630 card. Thanks for your help.

My MB is Asus Z270-A with I7700k.

Add to efi/clover/kext/10.12/ https://github.com/vit9696/Lilu/releases https://sourceforge.net/projects/intelgraphicsfixup/ 

Share this post


Link to post
Share on other sites

 

First...
If you need DSDT edits for KabyLake or Skylake...
-Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen)
-Post Ioreg, extract with Ioreg Explorer
-Run it, post files generate in your desktop
Installation
 
--Create a bootable copy of macOS Sierra
Check out the link
 
--Install Clover UEFI mode in USB stick
 
--Replace with my Clover folder to installer with FakeCPUID 0x0506E3
if u need, use VoodooTSCSync.kext
*I have Core i7, if u have Core i5 or i3, you need edit VoodooTSCSync.kext with correct IOCPUNumber
 
* Now in 10.12.6 have a full native support for Kabylake, use iMac18 smbios and remove fakecpuid
 
--Install Sierra and boot into system!
Post Installation
 
--Install Clover in UEFI mode and replace with my folder
 
--Reboot and activate video!
 
Bingo!
 
My mobo is Gigabyte GA Z270 Gaming K3, if you have other mobo, post your files here, i apply all patches for you! Read above! 
--DSDT mobo GA Z270 Gaming K3
My DSDT with patches for KabyLake
 
Patches
-FIX ERRORS AND WARNINGS
-HPET
-SATA
-DMAC
-SLPB
-DARWIN
-LPC
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-RTC
-IRQs
-SBUS
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-LAN
-USBX
-PMCR
-IMEI
-EC
-PNLF
-HDMI NVIDIA / ATI
--SSDT
Generate your SSDT for PM, use ssdtPRGen by Piker-Alpha
run in terminal
curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh
chmod +x ~/ssdtPRGen.sh
sudo ~/ssdtPRGen.sh
 
--install Lan driver by Mieze
 
-Atheros
 
-Intel
 
-Realtek
 
--Links
 
-FakeSMC
 
-Audio
 
-USB
 
Clear NVRAM, Purge and Kextcache
It's time to Rock attachicon.gifguitar.gif
 
Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!

 

this guide ok but bro plz help me my config is msi x99a sli plus cpu 6800k gtx 970 but cant install sierra so plz healp sorry my english bad

Share this post


Link to post
Share on other sites

why don't you start by providing more detail about your config. For example, put your hardware information in your signature. Is it a SATA hard drive? SSD? m2? etc.

It is a 1tb sata drive in my laptop.

 

Lenovo Flex 4 14" Laptop

Intel i7 7500U 2.90GHZ CPU

Intel Graphics HD 620 or AMD Radeon R5 M430

8GB DDR4 RAM

 

f67f2ba8e47389815cc4287bd39e5d5e.jpg

Share this post


Link to post
Share on other sites

here is a 200 series chipset, bro

check forum, have many tutorials about x99

Can you help me with this problem?

 

Hi guys. I have an issue with GPU on High Sierra. My display start flickering in ~5-10 seconds after boot. Can you help me please?

http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-mobos-serie-200-kabylake-dsdt/page-42?do=findComment&comment=2468375

Share this post


Link to post
Share on other sites

I got Sierra to recognize my internal hard drive by installing sata-100-series-unsupported.kext but I can't get it to recognize the drive in the installer still, anyway to install that kext in the installer?

 

Sent from my SM-G920V using Tapatalk

Share this post


Link to post
Share on other sites

Hi Maldon, i've got the same Z270-HD3P and 7700K, tried this clover folder you made for UITniun but i'm getting the following kp:

 

attachicon.gifScreen Shot 2017-07-25 at 22.26.32.png

the hardware from sig? :D  :P  :lol:

 

What gpu u use, XLR?

the video work, the problem is glitches?

CLOVER.zip

Share this post


Link to post
Share on other sites

the hardware from sig? :D  :P  :lol:

 

What gpu u use, XLR?

Tried Nvidia GT610 and the onboard Intel 630, both giving me this kp...

 

Also, on GT610 in safe mode i'm getting a black screen, with and without nvidia injection.

 

Replaced the gfx card to GT210 and managed to boot it in safe mode only

 

Update: Updated to 10.12.6 in safe mode with GT210, changed smbios to imac18,1 removed fakecpuid and now it's booting normally without safe mode.

However, GT610 always gives a black screen now - with and without injection, with and without webdriver...(

 

Update#2 With imac14,2 smbios i can get the GT610 working (webdriver, no injection) but the mouse cursor becomes invisible

 

Update#3 Shut down doesn't works when any USB storage device connected, it restarts after 10 seconds. Tried enabling FixShutdown in Clover but it doesn't help...

Share this post


Link to post
Share on other sites

Hi guys, I installed Sierra 10.12.6 on my Asus Z270-A and I7700k configuration following the guide in this post. I generated Ssdt with ssdtPRGen and copied it to Acpi patched. I would need the Dsdt edited for my configuration. Things I do not currently work on my system are:

Recognized video card but I can not simultaneously use my 3 monitors attached to Hdmi - Dvi and Display port respectively.
Audio not working in kext clover I've already copied the updated Apple Alc file.
All kext files in Clover folder 10.12 are updated to the latest versions.
Thank you all for the great help.
Below I place the files in my system.

CLOVER.zip

Send me Daw’s iMac.zip

Daw’s iMac iOReg.zip

Share this post


Link to post
Share on other sites

I got Sierra to recognize my internal hard drive by installing sata-100-series-unsupported.kext but I can't get it to recognize the drive in the installer still, anyway to install that kext in the installer?

Where/how did you install that kext? Install/ copy that kext to your clover folder under kexts where your other kexts are. Then I assume the installer will recognize it too.

Share this post


Link to post
Share on other sites

Where/how did you install that kext? Install/ copy that kext to your clover folder under kexts where your other kexts are. Then I assume the installer will recognize it too.

I finally got it working using this fix. Thanks tho.

 

https://youtu.be/eKM7IN4X0J0

 

Sent from my SM-G920V using Tapatalk

Share this post


Link to post
Share on other sites

Any ideas on my hard drive problem MaLd0N?

 

Sent from my SM-G920V using Tapatalk

check if have a "ProjSsdt" ssdt, if yes, drop

Tried Nvidia GT610 and the onboard Intel 630, both giving me this kp...

 

Also, on GT610 in safe mode i'm getting a black screen, with and without nvidia injection.

 

Replaced the gfx card to GT210 and managed to boot it in safe mode only

 

Update: Updated to 10.12.6 in safe mode with GT210, changed smbios to imac18,1 removed fakecpuid and now it's booting normally without safe mode.

However, GT610 always gives a black screen now - with and without injection, with and without webdriver...(

 

Update#2 With imac14,2 smbios i can get the GT610 working (webdriver, no injection) but the mouse cursor becomes invisible

 

Update#3 Shut down doesn't works when any USB storage device connected, it restarts after 10 seconds. Tried enabling FixShutdown in Clover but it doesn't help...

i think 610 dont work good anymore ;)

update ur bios for last version and send me ur clover folder with original dsdt, extract with f4

Share this post


Link to post
Share on other sites

 

Hi guys, I installed Sierra 10.12.6 on my Asus Z270-A and I7700k configuration following the guide in this post. I generated Ssdt with ssdtPRGen and copied it to Acpi patched. I would need the Dsdt edited for my configuration. Things I do not currently work on my system are:

Recognized video card but I can not simultaneously use my 3 monitors attached to Hdmi - Dvi and Display port respectively.
Audio not working in kext clover I've already copied the updated Apple Alc file.
All kext files in Clover folder 10.12 are updated to the latest versions.
Thank you all for the great help.
Below I place the files in my system.

 

CLOVER.zip

Share this post


Link to post
Share on other sites
Thank you so much Mald0n for your help, I deleted my Clover folder replacing it with yours, the audio still does not work,the graphics work on a single monitor. sleep mode not work because the system reboot.

How could I fix it?

My audio codec is Realtek ALC S1220A

Share this post


Link to post
Share on other sites

Hi, Mald0n, i confused where i want to post this as i want your help on building DSDT for my system.

  • Gigabyte GA-H110M-Gaming 3
  • i7-7700k
  • MSI RX 580 8GB

Everything is worked as expected, but having good DSDT would be a great addition for my system :P here's all required files

Thankyou :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By hungdv
      Hello guys,
      I was try to install MacOS Mojave on my new machine but no luck. Can anyone show me which guide to fit my system, please?please?please?
      + Mobo: GIGABYTE Z390 AORUS ELITE LGA1151v2
      + CPU: Intel Core i5-9600K 3.7GHz
      + iGPU: Sapphire RX 580 Pulse 8GB
      + Drives: SSD Samsung 970 Pro PCIe NVMe V-NAND M.2 2280 512GB
      + Ram: Crucial Ballistix Sport LT 2x8GB Bus 2666 DDR4
      + PSU: Corsair RM650 80 Plus GOLD
      + Case: Corsair 220T White RGB Airflow Tempered Glass
      + Cooler: Cooler Master HYPER 212 BLACK EDTION
      + Dual Band Network Card Broadcom Bcm94360 867Mbps.
    • By Rajan Pandit
      Hai, I have,
      i5 2500k
      GA-z68 AP D3 Rev.1
      Corsair 8 GM Ram
      Gigabyte Radeon RX 560 OC 4G Graphic Card
      500 GB Samsung SSD EVOf
       
      with this configuration I tried to install Mojave but After Apple Logo there was a black screen
      then nothing... please help
      I have create USB with terminal and Install Clover_v2.4k_r4961-Legacy.pkg to activate boot
      then I have recessary kext to EFI/KEXT/OTHER 
      but I am struck at Black Screen after apple logo
    • By Rajan Pandit
      Hai, I have,
      i5 2500k
      GA-z68 AP D3 Rev.1
      Corsair 8 GM Ram
      Gigabyte Radeon RX 560 OC 4G Graphic Card
      500 GB Samsung SSD EVO
      .. I want to install Mojave on this configuration...
      please help. what I need to do... 
      I have downloaded the Installer from APP Store...
      please help
    • By ScoobDoob69
      Hi, everyone so I am currently dual-booting Windows 10 and Linux Mint. I would like to add Mojave and triple boot (without formatting/losing all data from windows and linux).
       
      My Current Specs:
      CPU: Intel Core i7-2600 (not k) Sandy Bridge
      GPU: Aorus Radeon RX570 4GB
      Motherboard: Intel SWQ6710H
      HDD: 4TB Western Digital Blue WD40EZRZ
      Ram: 20GB DDR3 Total (2x 8GB + 2x 2GB)
       
      1. Is it possible to install Mojave on my HDD without wiping Windows 10 or Linux Mint?
      2. What guide is most ideal for my situation? 
       
      If you need any additional information or details, I am more than happy to provide that. I tried multiple guides months ago and could not get the installation to work. 
       
       
×