Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

5,393 posts in this topic

Recommended Posts

Hi @MaLd0n

My graphics card - AMD RX 570 is dead so I have to install the lower version with Nidivia GTX 950 graphics card.
Can you check the configuration I installed?

Main Asrock z370 Pro 4

Cpu i7 8700

Ram KLEVV 8x2GB buss 3000

Card Graphics: Nidivia GTX 950 2GB

Thank you very much!

 

Send me Huynhs-iMac.zip

Share this post


Link to post
Share on other sites
Advertisement
6 hours ago, Krani93 said:

 

 

@MaLd0n anything you can help me with my system? :( don’t know what to try next 

what problem ur hack have?

48 minutes ago, corbiz said:

pls replay me

use my dsdt patched and ur hack stay like one real mac

Share this post


Link to post
Share on other sites
2 hours ago, MaLd0n said:

what problem ur hack have?

use my dsdt patched and ur hack stay like one real mac

 

Mine doesn’t boot, I created the USB with gibMacOS and clover and when I select Recovery Install on Clover the Apple logo appears but it freezes at full progress bar. 

Share this post


Link to post
Share on other sites
22 hours ago, Krani93 said:

 

Mine doesn’t boot, I created the USB with gibMacOS and clover and when I select Recovery Install on Clover the Apple logo appears but it freezes at full progress bar. 

no matter what I try I allways end up with this screen

7DD248AD-962E-473E-9BA3-82EA39BFF537.jpeg

Share this post


Link to post
Share on other sites
2 hours ago, Krani93 said:

no matter what I try I allways end up with this screen

 

what ur video card? is a xfx card?

Share this post


Link to post
Share on other sites
10 hours ago, MaLd0n said:

what ur video card? is a xfx card?

just igpu, UHD 630

Share this post


Link to post
Share on other sites
12 hours ago, Krani93 said:

just igpu, UHD 630

check hackintool, have a many presets in menu

Share this post


Link to post
Share on other sites
On 1/11/2020 at 10:31 AM, MaLd0n said:

check if work

DSDT.aml.zip

 

u need rename EC0 to EC in battery patch

Hi again Mr. MaLd0n,

It seems that I still have some problems..

When I turn on the hackintosh, the log screen  stops for a minute, then a message with some " AGDCC:Unaothorized client 'prefpowerservice' AppleACPIPlatformExpert..../IntelFBClientControl,,," shows then, the login-screen appears.

Then I have an issue with the WIFI immediately after the log in.  For some minutes after power on, the WIFI service is not available...

1-st I had an original apple wifi card but with adapter did not fit very well in my case and I replaced with DW1820A(and patched the DSDT acordingly). The behaviour is the same with both cards!

 

Send me Mihais-MacBook-Pro.zip

Share this post


Link to post
Share on other sites
3 hours ago, mihu_yo said:

Hi again Mr. MaLd0n,

It seems that I still have some problems..

When I turn on the hackintosh, the log screen  stops for a minute, then a message with some " AGDCC:Unaothorized client 'prefpowerservice' AppleACPIPlatformExpert..../IntelFBClientControl,,," shows then, the login-screen appears.

Then I have an issue with the WIFI immediately after the log in.  For some minutes after power on, the WIFI service is not available...

1-st I had an original apple wifi card but with adapter did not fit very well in my case and I replaced with DW1820A(and patched the DSDT acordingly). The behaviour is the same with both cards!

 

Send me Mihais-MacBook-Pro.zip

first use a correct smbios, MacBookPeo15,2

Share this post


Link to post
Share on other sites
On 12/6/2019 at 10:12 AM, sony1979 said:

Hi @MaLd0n

Can you help me check config my notebook (DELL M7510):

The main problem now is that after clicking the menu to sleep or after no operation for a long time, it won't wake up, and the black screen only sees the backlight. Please help fix DSDT

  • CPU: i7 6820HQ
  • GPU: INTEL HD530(AMD W5170W 2G has disabled BIOS)
  • Ram: 16G*2
  • 4USB3.0 NO TYPEC  1HDMI  1MINIDP
Thank you very much

 

Send me sundeMBP.zip

DSDT.aml.zip

 

ENABLE ECDV TO EC PATCH

21 minutes ago, mihu_yo said:

Send me Mihais-MacBook-Pro.zip 

nothing changed.

IDK what happen

Share this post


Link to post
Share on other sites
47 minutes ago, mihu_yo said:

Send me Mihais-MacBook-Pro.zip 

nothing changed.

 

30 minutes ago, MaLd0n said:

IDK what happen

The laptop hangs for a minute before the las line from the log(see picture)then, in mac the WIFI is not responding for few minutes...Network pref panne is not responding at all. but just few minutes after login...

maybe you meet this before and know how to fix...

Thank you in advance!

 

IMG_20200202_164032.jpg

Edited by mihu_yo

Share this post


Link to post
Share on other sites
On 2/1/2020 at 3:50 PM, MaLd0n said:

check hackintool, have a many presets in menu

 but isn’t hackintool for the installed Hackintosh? I don’t even get to boot the installer

Share this post


Link to post
Share on other sites

Hello

 

Im trying to fresh install Catalina 10.15 but the pre-boot LAN not working

I got Realtek RTL8168H/8111H for my NIC which is working fine in Mojave

Im using my EFI pack which is working in Mojave

Is there any work around for this?

 

Thx

Share this post


Link to post
Share on other sites
13 hours ago, gengstapo said:

Hello

 

Im trying to fresh install Catalina 10.15 but the pre-boot LAN not working

I got Realtek RTL8168H/8111H for my NIC which is working fine in Mojave

Im using my EFI pack which is working in Mojave

Is there any work around for this?

 

Thx

check mieze guthub

Share this post


Link to post
Share on other sites

Hi guys, i tried to install Catalina on my Dell e7270, i tried to follow the tutorial on the first page, choosing skylake chipset for notebook, but i don't know which settings to set on clover, because i can't reach the installer at least...can help me and suggest me the correct way?

Updated with verbose stack atappleps2mouse, and attached my efi folder

Thank you

IMG_20200208_115631.jpg

EFI.zip

Edited by Kaya80

Share this post


Link to post
Share on other sites

Hi Mald0n, 

 

I would love to have your treatment with DSDT.

 

I somehow couldn't get AirDrop/Handoff/Continuity/Netflix on Safari browser to work hopefully with your DSDT this would be fixed.

While using one of the recommended wifi card ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)  

 

Thanks in advance & Friendly Regards,

 

Armaniboy

 

 

Edited by Armaniboy

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By pilo2300
      Hi, I'm receiving these two errors before the system automatically reboots.
      36:296 00:063 OCSMC: SmcReadValue Key 4D535463 Size 1 36:351 00:054 OCSMC: SmcReadValue Key 4D534163 Size 2  
      Using OpenCore 0.5.7, Mojave 10.14.6 installed successfully (from USB, but have not gone through OS setup ie. 'select your country' screen yet) but now selecting the Mojave drive in the boot picker results in the above error.
      Hardware is Gigabyte H77-DS3H, Core i7 3770 (Ivy Bridge), Radeon Sapphire RX 580 Pulse, 16GB DDR3 ram.
       
      I had a fully working 10.14.4 install running OC 0.5.6 prior to this.

      OpenCore log and config.plist (with SMBIOS serials etc removed) attached - any help greatly appreciated.
       
      Thank you.
      opencore-2020-04-08-000853.txt
      config.plist
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Current EFIs 
      Updated 06/04/2020
      PLEASE NOTE - You MUST update to the latest Clover EFI before updating to 10.15.4 or you may find your unable to update.
       
      Clover EFI Updated 06/04/20 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      Clover Z390 Master Navi Vega 19,1 EFI 060420.zip - Vega, Navi (5700, 5700XT etc), Radeon VII DSDT EFI
      Clover Z390 Master Polaris 19,1 EFI 060420.zip - R5xx Polaris DSDT EFI
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - OpenCore v0.5.7, No DSDT and Done the way OpenCore intended it (06/04/2020)
       

      Alternative EFI 2 - N-D-K OpenCore v0.5.7 (06/04/2020)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       

       

       

       

       

       

       

       
    • By MaLd0n
      Install MacOS with Olarila Image, Step by Step, Install and Post Install  
      https://www.olarila.com/topic/5794-hackintosh-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Paste my EFI folder into EFI partition  EFI GA H110M-S2.zip     --Install Sierra/High Sierra and boot into system!   Post Installation   --Paste my EFI folder into EFI partition  EFI GA H110M-S2.zip     --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with Skylake patches DSDT.GA H110M-S2.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By cixque
      CLOVER.zipCLOVER.zipDell Venue 11 Pro 7140
      ------------
      Specification
       
       
      Intel Core M 5Y71
       
      Intel HD Graphics 5300
       
      Intel Broadwell-U motherboard
       
      8GB Ram
       
      256GB SSD
       
      Dell DW1850e WWAN + GNSS GPS
       
      Intel Wireless 7265 + Intel Bluetooth
       
      NFC
       
       
      …..
       
       
       
       
       
      Mojave 10.14.6
       
      What works
      Native Power Manager (Generate Plugin type) Full Graphics with QE/CL Brightness (Add PNLF in Config.plist or DSDT Patch) — (Brightness slide bar) Touch Screen, and Pen (DSDT Patch + Voodoo I2C, I2CHID satellite KEXT) HDMI output with hot plug (Lilu + WhateverGreen) HDMI Audio with hot plug (Lilu + AppleALC) no Layout-id needed Front and Rear Cameras MicroSD slot - O2 Micro (I use Adding Arbitrary under Devices in Config file Method) Ref, Post #6 by Jake Jo https://osxlatitude.com/forums/topic/7346-applesdxc-driverdsdt-patch-for-o2-micro-sd-card-readers/ Battery Indicator (ACPIbattery by Rehabman) ——>To utilise both battery, SSDT (by Rehabman) is needed in order to combine 2 batteries as one.
      Travel Keyboard Dell K12a001 (USBinjectall KEXT) Native Keyboard keys (Brightness, volume keys) WWAN card Dell DW1850e (OOB) Bluetooth -------------------
       
      What doesn’t work
       
       
      Sleep Wake — I have no idea how to fix it as it is required DSDT patch I guess. GPS NFC Audio ---> Realtek I2S Audio (PG0.35 for DELL)
       
      In DSDT entries is HDAUDIO\\FUNC_01&VEN_10EC&DEV_0282&SUBSYS_00000000&REV_1000\ Which indicates ALC282
       
      Audio ALC3263 (As it shown in BIOS) - Broadwell rt286 - Card1/Codec#0 (Utilised in I2S Mode) there is nowhere in BIOS to change to HDA mode). Drop OEM HDA and Fix HDA don’t do anything, still show 3 HDMI Audio outputs. If there is a DSDT patch to force HDA Audio mode, Please do enlighten me.
      As a result Internal Speaker, Internal Mic, and Headphone Jack doesn’t work.
       
      Touchpad on Travel Keyboard Dell K12a001 (Should work with DSDT Patch with pin configuration) I have no idea how. Obviously, Intel Wireless 7265 AC. For experimental purpose. https://github.com/daliansky/XiaoMi-Pro-Hackintosh/issues/330 — Knock yourself out. I managed to get it work for awhile but the real problem is kernel panic so I gave up. Ordering compatible card instead. ------------------
       
      Config.plist got it from Rehabman laptop config.
       
       
      BIOS version A20
       
      Enable:
       
      - Legacy Boot Rom
       
      Disable:
       
      - Secure Boot
       
      - TPM 2.0
       
      - Vt-d
       
      ------------
       
      SMBIOS - I use MacBook8,1. —- MacBookAir7,1-7,2 (Min Freq is at 1.2 GHz) MacBookPro12,1 Min Freq is at 800 Mhz and it is the default this cpu should be. Again, there is a way to set it right somewhere in this forum.
       
      ------------
       
      -->> DSDT Windows 8 patch
       
      System sees only one I2C Controller which control Touch Screen.
      Touch Screen registers as Magic Trackpad 2.
      Pen as Mouse
       
      -->> DSDT Windows 8.1 Patch
       
      System sees two I2C Controllers which control Touch Screen and Accelerometer.
      Touch Screen registers as Magic Trackpad 2.
      Pen as Mouse
       
      OOO>>> With Windows 8.1 patch which it should run with this one because it can see more of HID devices and controllers.
       
      Problem is Accelerometer (SHUB).
      Device can automatically rotate screen as it should be BUT it flips the screen wildly even with slightly movement. It stops only when device stays completely still. Eventually it breaks internal screen graphic. It becomes grabble. I restored internal screen graphic by connecting it to external monitor and set rotation of external screen to 0 degree. Then it is back to normal. (I guess it conflict with rotation setting) I disable SHUB in DSDT.
       
      ---------------------
       
      During Installation process Full Graphic acceleration can be activated straight away by Lilu and Whatevergreen. AppStore, iMessage and, FaceTime activate by NullEthernet and SSDT by Rehabman USBInjectAll needed for keyboard and other usb peripherals. Use other tool to keep certain ports active as Rehabman mention this KEXT is not good for a long run. Please do Correct me if I did something worng. Or any suggestions to make this thing runs better.
      CLOVER.zip
      IOReg_SysReport.zip
×