Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

5,273 posts in this topic

Recommended Posts

Posted (edited)

Hey guys, i have a conexant 8150 that I compiled alc for. Worked great on mojave and I wanted to try catalina. Audio worked at first but it is now no longer working. What can I do? 

 

Edited by devillived666
double commented same sentence

Share this post


Link to post
Share on other sites
Advertisement

Hello. I'm running Mojave on my Dell workstation M7510. It works quite good, except for a few things.

- Sometime boot stuck at apple logo (1/10 times). Nothing can do but hard reboot.

- Sleep does not work if any of the 4 USB port attached to a USB device. It wakes up right a way after the screen turns black.

- Sound does not work if auto waken up by the above 2nd issue.

- Brightness adjustment not works properly (Fn+F6 does trigger a brightness decrease).

 

Will be great if any of those issues can be solved. Thanks in advance.

Send me GiangNVTs-MacBook-Pro.zip

Share this post


Link to post
Share on other sites
3 hours ago, giang_asl_8 said:

Hello. I'm running Mojave on my Dell workstation M7510. It works quite good, except for a few things.

- Sometime boot stuck at apple logo (1/10 times). Nothing can do but hard reboot.

- Sleep does not work if any of the 4 USB port attached to a USB device. It wakes up right a way after the screen turns black.

- Sound does not work if auto waken up by the above 2nd issue.

- Brightness adjustment not works properly (Fn+F6 does trigger a brightness decrease).

 

Will be great if any of those issues can be solved. Thanks in advance.

Send me GiangNVTs-MacBook-Pro.zip

https://olarila.com/forum/viewtopic.php?f=62&t=9989

Share this post


Link to post
Share on other sites
1 hour ago, ginnjuice said:

Good morning folks, could use some help tidying up USBs and KP on shutdown/restart.  Please see attached RunMe output.

 

Thanks!

Send me iMac.zip

replace full EFI folder, reboot

EFI.zip

Share this post


Link to post
Share on other sites
Posted (edited)

IMG_20190729_021704.thumb.jpg.03f800309b75e5740b351f99313458c9.jpghi @MaLd0n

 

i havr a asrock h310 itx ac here with i3 8100 bios 3.10..

 

trying to install niresh mojave with default params..

 

62194525-b5479b00-b382-11e9-9ae2-9d2b973

Edited by barron9

Share this post


Link to post
Share on other sites

Greetings MaLd0n, I'm running an Z390 Aorus Pro and trying to get a DSDT and get off of AptioFix2Drv-free2000 and generally get some things streamlined and cleaned up. One unique thing about this build is I run a second graphics card in PCI slot 2 for windows that I want to disable on Mac (currently done with an SSDT). Thanks for your help!

SendMeTasc.zip

Share this post


Link to post
Share on other sites
3 hours ago, tasc said:

Greetings MaLd0n, I'm running an Z390 Aorus Pro and trying to get a DSDT and get off of AptioFix2Drv-free2000 and generally get some things streamlined and cleaned up. One unique thing about this build is I run a second graphics card in PCI slot 2 for windows that I want to disable on Mac (currently done with an SSDT). Thanks for your help!

SendMeTasc.zip

EFI.zip

replace full efi, reboot, press f11 in clover boot screen

Share this post


Link to post
Share on other sites
1 hour ago, MaLd0n said:

EFI.zip

replace full efi, reboot, press f11 in clover boot screen

 

Thanks for sending that over! I cleared NVRAM with f11, but I didn't get very far with with that EFI. Right after booting, it gave me a "Couldn't allocate runtime area".

allocate.jpg

Share this post


Link to post
Share on other sites
7 hours ago, tasc said:

 

Thanks for sending that over! I cleared NVRAM with f11, but I didn't get very far with with that EFI. Right after booting, it gave me a "Couldn't allocate runtime area".

 

fail every time?

Share this post


Link to post
Share on other sites
1 hour ago, MaLd0n said:

fail every time?

 

Yes, it seems others on this board have had to go to iMacPro1,1 SMBIOS and disable integrated graphics in order to get away from AptioFix2Drv-free2000. 

Share this post


Link to post
Share on other sites
Just now, tasc said:

 

Yes, it seems others on this board have had to go to iMacPro1,1 SMBIOS and disable integrated graphics in order to get away from AptioFix2Drv-free2000. 

yes, in some cases if enable intelHD aptiomemoryfix fail

Share this post


Link to post
Share on other sites
On 8/3/2019 at 9:26 AM, MaLd0n said:

yes, in some cases if enable intelHD aptiomemoryfix fail

 

Very good, I've switched to iMacPro1,1 and disabled internal graphics and now I can boot with that EFI. I'm noticing a couple ACPI errors in boot log that look out of place. I've attached my clover F4 extract as well if that helps. Thanks!

 

-PXSX.WIST namespace lookup failure

-No local variables CNDP

-No arguments initialized CNDP

 

ACPI.jpg

tasc_origin.zip

Share this post


Link to post
Share on other sites
1 hour ago, tasc said:

 

Very good, I've switched to iMacPro1,1 and disabled internal graphics and now I can boot with that EFI. I'm noticing a couple ACPI errors in boot log that look out of place. I've attached my clover F4 extract as well if that helps. Thanks!

 

-PXSX.WIST namespace lookup failure

-No local variables CNDP

-No arguments initialized CNDP

 

ACPI.jpg

tasc_origin.zip

extract new send_me

Share this post


Link to post
Share on other sites
5 minutes ago, MaLd0n said:

SSDT-6-A M I.aml.zip

put in clover/acpi/patched, reboot

 

That fixed it, thanks a ton! What was the issue that required this additional SSDT?

Share this post


Link to post
Share on other sites
5 hours ago, tasc said:

 

That fixed it, thanks a ton! What was the issue that required this additional SSDT?

Is a oem ssdt usb, u can edit this ssdt for a real native usb ;)

Share this post


Link to post
Share on other sites

@MaLd0n

 

Sorry to bother you buddy but I've been told your knowledge is god like in status so I was wondering if I could pick your brains for a moment?

 

I'm Using a clover efi done by Glasgood and he recently changed hes EFI to use a DSDT and it all works fine as we all have exactly the same parts but I am experiencing a problem where if my System is asleep and I wake it up and then shut it down the LED lights on the gigabyte z390 pro board stick on after it powers down until erp kicks in and turns them off. Then when I press the power button the system won't start back up and it takes 3 or 4 attempts of pressing the power button to get it going again.

Any ideas why this is happening?

All our bios setting are the same, the only thing I can come up with is maybe theres a slight change in board revision from hes to mine.

If you have any ideas or can help in anyway that would be awesome buddy. :)

Share this post


Link to post
Share on other sites

Hey guys, I've been able to successfully run and update Catalina on Asus vivobook x405UA until beta 4. I am now stuck here . What can I do?d1c0724f83ab79ab5d3436ee8fc9e34d.jpg

Sent from my Pixel 3 using Tapatalk

Share this post


Link to post
Share on other sites
8 hours ago, devillived666 said:

Hey guys, I've been able to successfully run and update Catalina on Asus vivobook x405UA until beta 4. I am now stuck here . What can I do?

Sent from my Pixel 3 using Tapatalk
 

https://www.insanelymac.com/forum/topic/339035-pre-release-macos-catalina/?page=51&tab=comments#comment-2683788

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By JamesMaloney
      Salve a tutti,
      ho provato diverse volte ad installare macOS sul mio laptop ma sempre senza successo, non riesco mai ad arrivare nemmeno all'installer!
      Ho tentato ormai diverse configurazioni/driver ma non capisco mai da cosa siano derivanti gli errori o i blocchi che mi trovo davanti e sto quindi cercando aiuto per capire come procedere 
      Nello specifico il config che sto provando ad utilizzare non mi trova per niente la partizione con l'installer, mentre un altro vecchio (presente sempre nella cartella di clover allegata con estensione .orig) si inchioda subito dopo la scelta della partizione di avvio.
      Qualcuno mi sa dare una mano su come superare ciò?
      Grazie in anticipo,
       
      Giacomo
       
       
      P.S. Le mie specifiche sono:
       
      - Modello ASUS N552VW-FI202T
      - Schermo 3840x2160
      - CPU Intel Core i7-6700HQ
      - RAM 16GB ddr4 2400mHz
      - Intel HD Graphics 530 + nVidia 960m 4GB (anche funzionasse solo la Intel sarebbe perfetto)
      - SSD 256GB
      - HDD 1TB
      CLOVER.zip
    • By tonyx86
      I was inspired by @duduclx post for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5.  Everything works perfectly (including sleep with the solution described later in this thread).  I'm starting this thread hoping to help others install Mojave on their E6410s.  This thread is not currently intended to be an installation guide and is better suited to the intermediate/advanced hackintosher.  Eventually, it may evolve into a guide.
       
      I started with this thread and ended up with the system captured in the attached files.  The keys were to change the LPCB._DSM.Name to "3b09" and remove all CLOVER configs not necessary for Mojave, plus some other items mentioned below.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 6 developed by @Dr. Hurt and compiled by @bronxteck), not the original version), USBInjectAll (with custom SSDT-UIAC), VoodooSDHC.kext (configured as shown here). Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads  No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Sleep is not working with the files attached to this first post, but I have found the solution for sleep/wake.  Read Known Issues below. Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings.  The slider appears in Display settings (because of the backlight DSDT injection in AGP.VID._DSM), but the slider doesn't work (yet).  Haven't spent time to figure this out, but would love help. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)  
      What IS working:
      Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera SD Card Reader  
      Known issues and their solutions
      AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  This has been completed and tested, but does not fix the sleep behavior.  This fix is not reflected in the attached files. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European.  The updated VoodooPS2Controller.kext is not reflected in the attached files. This proposed configuration uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior and have not updated attached files to reflect this change. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly.  I have made this change and am testing it on my system, but have not updated the attached configuration files. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The DSDT patch that duduclx refers to as "Intel GMA Ready" in his El Capitan Guide is not applied correctly to the DSDT attached to this post.  Somehow, the contents of patched _DSM are located in the PCI0.VID device instead of in Method (_DSM) within the PCI0.VID device.  MaciASL didn't complain about this, so it went unnoticed, but it doesn't appear to have had any affect.  I have completely removed this "Intel GMA Ready" patch from my DSDT since it is not necessary for Dell Latitude E6410's with NVidia 3100m, but have not updated the attached DSDT. The assigned value of ACOS in the DSDT is conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc), analogous to the assignment of OSYS.  I made this change in my DSDT (not yet reflected in the attached files), but have not observed any behavioral differences (sleep or otherwise).  EDIT: Another way to handle this might be to override _OSI with XOSI (defined in a custom SSDT).  Still learning about XOSI and haven't yet drawn a conclusion.  I'm currently experimenting with ACOS and OSYS equivalent to Win7 and Linux (manually patched in my DSDT which has not yet been updated as a new attachment to this post). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  I believe that this should be an internal USB port (portType=2).  My custom SSDT-UIAC.dsl is wrong.  I just learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  I have not attached an updated SSDT-UIAC.aml to this first post, but my current EFI includes an updated SSDT-UIAC.aml with ports HP15, 16 17 and 18 set to internal (portType = 2).  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits.  I am now running with these changes, but haven't found these changes to make any difference in operational behavior.  These changes are not reflected in the attached DSDT.
      Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to (SLPB) Change HDAU.hda-gfx from "onboard-1" to "onboard-2" Change GFX0.hda-gfx from "onboard-1" to "onboard-2" Sleep / Wake does not work with the basic DSDT edits.  I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF() and _ON() methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/.  I currently have sleep working on my Latitude E6410 and am continuing to test it.  The solution is documented later in this thread, but files are not yet attached to this first post. After applying Mojave updates, HWMonitor may not display discrete graphics attributes.  On systems with multiple displays, a second (or third display) may not be active after applying the Mojave update.  The solution to this is to run "sudo kextcache -i /" (in a terminal window) and reboot.  This will usually fix the issue.  If the issue is not fixed, run DosDude's Post Install Utility, apply the Legacy Graphics Patch, reboot and then run "sudo kextcache -i /" if necessary.  
      Brief Installation Guide (for the experienced Hackintosher):
      Follow duduclx's guide for BIOS config Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext.  Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original) Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z

      CLOVER.zip
    • By aaroncete17
      Can someone help me to detect the graph please

    • By Ragimund (HP Z820)
      Hi All,
       
      My current and my First Hackintosh Mojave (HP Z820) has 3rd party Usb Controller : "Texas Instruments xHCI Host Controller".
       
      I have in...
      Front panel : 1 x USB2.0 + 2 x USB3.0
      Back Panel : 4 x USB2.0 + 2 x USB3.0
       
      They all work but as "USB2.0 mode" ie Slow.
      I have plenty of external USB3.0 Hard drives full of video material from my shootings on my trips.
      Idea was to use Hackintosh for editing (Final Cut Pro X) but this transfer is really slooow 
       
      I have read that it's possible to get NON-Intel USB3.0 to work, plenty of articles here, but this is my First Hackintosh and I'm a Noob ! 
       
      In my Clover /kext/other is no UsbInjectAll.kext (didn't help), but I downloaded Rehabs GenericUSBXCHI.kext (RehabMan-Generic-USB-2015-1215) there.
      I also managed to download IORegistryExplorer app.
      -The Hackintool shows only USB2.0 (screenshot attached) - no usb3.0.
      -The IOReq shows USB3.0 (I think) - but how to verify that USB3.0 ports are really USB3.0 and "high speed". (IOReq file attached)
       
      If this needs some "patching" or something it's out of my Noob league
      I have now build this Desktop about week, reading plenty of thing that I don't fully understand and trying to "copy & learn" from Masters...
       
      Can anyone help ?
       
       

      MacPro_IOReq.zip
    • By Ragimund (HP Z820)
      Hi All,
       
      I have old HP Z820 (my first Hackintosh, Mojave) and I have in SMBIOS set value MacPro 6,1 like in Sierra and High Sierra guides for HP Z820.
      But when I googled Geekbench 5 results (is this Bad/Average/Good?) for my CPU type to see others results, I find different results for Product type.
       
      I looked for Xeon E5-2695 v2 12 Core Ivy Bridge EP (I have double, so 24 Core) and found Windows and macOS results.
      I think that those macOS E5-2695 v2 devices were Hackintosh's.
       
      But there were types like :
       
      -MacPro 1,1
      -MacPro 5,1
      -MacPro 6,1
      -iMac 14,2
      -iMac 16,2
      -iMac 18,3
      -iMac 19,2
       
      Why so many ? Is there some benefits with "newer one" or are they build with some Clover "Default value" or what ?
      Should I stay with my MacPro 6,1 setting in Mojave 10.14.6 ?
       
      -Noob 
       
×