Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

5,337 posts in this topic

Recommended Posts

13 hours ago, SardusX86 said:

Hi MaLdOn,
I recently installed macOS Mojave 10.14.4 (and now updated to 10.14.5) on my new system:

Gigabyte Z390 Designare
Intel i9-9900K
Sapphire Radeon RX 580 Pulse 8 gb
Dell U2410

Clover bootloader UEFI mode, smbios iMac 19.1, Lilu+WhatEverGreen+AppleALC (setting UHD 630 in headless mode via device/properties)


<key>Properties</key>
        <dict>
            <key>PciRoot(0x0)/Pci(0x1f,0x3)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Built In</string>
                <key>device_type</key>
                <string>Audio Controller</string>
                <key>layout-id</key>
                <data>
                EAAAAA==
                </data>
                <key>model</key>
                <string>Realtek ALC1220-VB</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>
                AwCYPg==
                </data>
                <key>AAPL,model</key>
                <string>Intel UHD 630</string>
                <key>AAPL,slot-name</key>
                <string>Internal</string>
                <key>device_type</key>
                <string>Graphics Processor</string>
                <key>framebuffer-patch-enable</key>
                <data>
                AQAAAA==
                </data>
            </dict>

 

The problems are:

- connecting the monitor (Dell U2410 - DP 1.2) via the  RX580 DP port the screen goes black with the message "entering power save mode" after the boot first stage. Turning off and on the monitor the login screen appears normally.
Using the DVI-D and the HDMI ports no problem (only with the HDMI port colors seem to be over-saturated, perhaps due to the YPbPr setting)
Unfortunately I don't have the possibility to exclude some incompatibility of macOS with the Dell U2410 via the RX 580 DP port. Using an Ubuntu Live USB installer or Windows 10 OS (Multiboot) the monitor seems to work fine via the RX 580 DP port)

- the HEVC codec does not seem to be supported with this configuration

I tried different smbios/WEG settings but without success, do you think that creating a custom DSDT can solve these problems?
Could you help me?
Thanks in advance

Send me SardusX86-iMac.zip

EFI.zip

replace full efi, reboot

use only it

Share this post


Link to post
Share on other sites
Advertisement
On 6/20/2019 at 5:13 AM, MaLd0n said:

EFI.zip

replace full efi, reboot

use only it

Thanks,

with AptioMemoryFix-64.efi system go Kernel Panic. Replacing it with OsxAptioFix2Drv-free2000.efi system boot but unfortunately DP port problem and unsupported HEVC not are solved

Edited by SardusX86

Share this post


Link to post
Share on other sites

hi Moderators!

I update my PC and install Hackintoush!

Can u help me! pls!

I run RunMe.app and send my file to you!

(so sorry I don't know En)

My PC:

- CPU: Pentium G4600.

- Ram: 16GB - 2400MHz

- Main: arosk - B250M-Pro4

- NVME: Samsung 970 evo plus 250GB.

- VGA: NVDIA GTX750TI-2GB-OC

Thanks u so much!!!!!

Send me 123s-iMac.zip

Share this post


Link to post
Share on other sites
On 6/20/2019 at 11:42 AM, Giang Long said:

Hi MaLdOn,
I installed macOS Mojave 10.14.3 on my PC:

Arsock Z370 Pro4
Intel i5-8400
Can you help me config EFI?

Thank you very much!Send me Giangs-Mac-mini.zip

DSDT.aml.zip

On 6/21/2019 at 11:27 AM, SardusX86 said:

Thanks,

with AptioMemoryFix-64.efi system go Kernel Panic. Replacing it with OsxAptioFix2Drv-free2000.efi system boot but unfortunately DP port problem and unsupported HEVC not are solved

extract new send_me

Share this post


Link to post
Share on other sites
10 hours ago, ldgiang2003 said:

hi Moderators!

I update my PC and install Hackintoush!

Can u help me! pls!

I run RunMe.app and send my file to you!

(so sorry I don't know En)

My PC:

- CPU: Pentium G4600.

- Ram: 16GB - 2400MHz

- Main: arosk - B250M-Pro4

- NVME: Samsung 970 evo plus 250GB.

- VGA: NVDIA GTX750TI-2GB-OC

Thanks u so much!!!!!

Send me 123s-iMac.zip

put ur gpu in first slot x16

DSDT.aml.zip

Share this post


Link to post
Share on other sites
23 hours ago, MaLd0n said:

extract new send_me

I used EFI folder You provided in a Clover Test USB pendrive to boot the system.
I should extract the new send_me starting from my original setting or using the EFI folder that You provided?

Edited by SardusX86

Share this post


Link to post
Share on other sites
2 hours ago, Lendon said:

Sir this is my DSDT get from clover F4

My Notebook is MSI P75 Creator 9SF

Link is here https://tw.msi.com/Prestige/P75-Creator-9SX/Specification

Now still stop under insatll

Please help me with my DSDT

 

origin.zip

DSDT.aml.zip

change GFX0 to IGPU
47465830 
49475055 

change HDAS to HDEF
48444153 
48444546 

change HECI to IMEI
48454349 
494d4549 

change SAT0 to SATA
53415430 
53415441 

 

Share this post


Link to post
Share on other sites

hello MaLd0n,

 

i built computer to use hackintosh and i try oliave installer. i got this error message,

-MSI Z170I Gaming Pro

-Intel G4560

-Onboard UHD 610 Graphic

 

thank you

IMG_9309.JPG

IMG_9310.JPG

Share this post


Link to post
Share on other sites
14 minutes ago, burcinkarabacak said:

hello MaLd0n,

 

i built computer to use hackintosh and i try oliave installer. i got this error message,

-MSI Z170I Gaming Pro

-Intel G4560

-Onboard UHD 610 Graphic

 

thank you

 

 

u need a fakecpuid, ur processor don't have native support

Share this post


Link to post
Share on other sites
Just now, MaLd0n said:

u need a fakecpuid, ur processor don't have native support

 

:( can i add before start to installation or i have to change in usb ? i research a bit, but my usb doesnt have config.plist file ?

 

thank you 

Share this post


Link to post
Share on other sites
22 minutes ago, MaLd0n said:

prress O key in clover boot screen, u can change all there

ı skip finally thank you so much. i wonder, everytime i need to enter fakecpuid ?

 

thank you

Share this post


Link to post
Share on other sites

Hi,

 

I have a problem with UHD 630 GPU, in Intel Power Gadget doesn't show the GPU's frequency at all and I tried to patch it somehow with Whatevergreen and some config.plist stuff but no chance.

 

Can you patch it or tell me how to do it ?

 

Thanks a lot !

 

System Specs:

ASRock B365M Pro4

Intel Core i5 9600K

Intel UHD 630

Send me Maxs-iMac.zip

Share this post


Link to post
Share on other sites
1 hour ago, burcinkarabacak said:

ı skip finally thank you so much. i wonder, everytime i need to enter fakecpuid ?

 

thank you

add it in ur config.plist

Share this post


Link to post
Share on other sites
55 minutes ago, maxb2000 said:

Hi,

 

I have a problem with UHD 630 GPU, in Intel Power Gadget doesn't show the GPU's frequency at all and I tried to patch it somehow with Whatevergreen and some config.plist stuff but no chance.

 

Can you patch it or tell me how to do it ?

 

Thanks a lot !

 

System Specs:

ASRock B365M Pro4

Intel Core i5 9600K

Intel UHD 630

Send me Maxs-iMac.zip

replace full efi, reboot

EFI.zip

Share this post


Link to post
Share on other sites
7 hours ago, MaLd0n said:

add it in ur config.plist

 

Thank you so much i added in plist than try boot automatically. just i couldnt find intel 3165nngw wifi kexts 

Share this post


Link to post
Share on other sites
9 hours ago, burcinkarabacak said:

 

Thank you so much i added in plist than try boot automatically. just i couldnt find intel 3165nngw wifi kexts 

intel don't work

Share this post


Link to post
Share on other sites

@MaLd0n hi,

 

I would like to install Catalina z on your image Catalina Beta3, the vendor that I add to the format of the disk I get hooked (picture)

We can help you?

Thank you

 

 

Error.png

Edited by luky35

Share this post


Link to post
Share on other sites

hello MaLd0n

I ask you if you can

look at my efi folder if it's okay?

 

Intel Core i3 8300

MSI  H310M Pro-VDH-PLUS

Ballistix sport 2x4GB 

Radeon RX 570 4 GB

Intel UHD 630

Dell w1560 Wi-Fi /Bluetooth

 

Mojave 10.14.5

Send me iMac-di-Pinko.zip

Share this post


Link to post
Share on other sites
9 hours ago, luky35 said:

@MaLd0n hi,

 

I would like to install Catalina z on your image Catalina Beta3, the vendor that I add to the format of the disk I get hooked (picture)

We can help you?

Thank you

u extract before burn? image is tested, work fine

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By mrwlkr
      Hello everyone, I've an Acer Aspire E5-574 running Mojave at last update, everything is fine, except by the laggy mouse, as the attached, when the system needs the graphic card (Intel HD 520) it's generates a lag.
       
      Thanks

      final_5e2761c58c6b910015da7cf6_967905.mp4 Send me MacBook-Pro-de-Murilo.zip
    • By lizdav
      Hello People,
       
      I have a dual-boot system with both Win10 and MacOS on separate drives. MacOS on an SSD while Windows is on a standard laptop HD. At first it was working fine and I haven't thought much of it but recently MacOS started acting weird. The first thing I noticed was that Clover somehow "forgot" my primary boot drive. This wasn't a huge issue though, as it was booting just fine once I hit enter on the drive selected. I updated Windows 10 to a newer build, however, I did all of this with the SSD drive unplugged just to be sure. Now Windows is working properly while MacOS is having some quite frustrating errors which make it impossible for me to work...
       
      Anyway, the problems are the following:
       
      - random reboots
      - apps freeze or won't start just "bounce"
      - internet not working(eventhough every other device connects just fine)
      - system is laggy overall
       
      I have tried emptying NVRAM int Terminal but I only got a message saying 'Error clearing firmware variables'. I've been searching for solutions on the web for the issue at hand but struggled to find one... I would really appreciate some help.
       
      I attached my config.plist down below. If more information is required, please let me know.
       
      Thank you!!
       
       
       
      config.plist
    • By superdooper71
      Hi I wonder if you can help me out guys.
      I have few issues here
      • First
      when I boot the clover entry screen do not show the disk icons until i press enter
      (If I disconnect the keybord all is smooth, clover start, shows disk icons and boot from Mojave)
      • Second
      Randomly the keyboard and mouse become pretty unstable. The mouse cursor start flashing or the keyboard start to type repetedly <<<<<<<<<<< when i Press the spacebar or some other button
      (this behaviour is applied to all keyboard I have tried, actually 3 different ones)
      --------------------------------------------------------------------
      KB and Mouse are plugged on a USB 3.0 ports
      I have tried to reset the keyboard Pref but NO LUCK
      I have changed Keyboard - Same error
      --------------------------------------------------------------------
      I enclose IOREGregistry and config.plist
       
      MY CURRENT BUILD
      ASROCK Z270 PRO4
      i7 7700K
      32GB DDR4
      Gigabyte GTX 760
       
      I believe that there is some code conflict but I have no idea what is wrong
       
      Please HELP
      Cheers
      Franco
      config.plist
      iMac di imac27.ioreg.zip
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F10, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Nitro+ SE 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.1
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      CLOVER EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Use this folder with fully patched DSDT
      Current EFI 
      Updated 14/01/2020
       
      EFI Update - 14/01/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      Aorus Z390 Master F11c Navi Vega VII EFI.zip - Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI
      Aorus Z390 Master F11c RX Polaris EFI.zip - RX5XX Polaris DSDT EFI
      Aorus Z390 Master F11c HD630 igpu EFI.zip - Use with Bios revision F11c Only (17/01/2020 UHD630 IGPU Only) SMBios 8,1
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       

      Alternative EFI - N-D-K Fork of OpenCore (14/01/2019)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&amp;t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F10)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

    • By kushwavez
      A really good motherboard with macOS compatible bult-in Wifi & Bluetooth

      ASUS Z170-Deluxe (with Wifi)
      BIOS: v3801
      CPU: i7-6700K 4.0 to 4.2 GHz (w/o OC)
      RAM: 1x 16 GB Corsair DDR4 2400 MHz
      GPU: Intel HD 530 (Headless) & ASUS Radeon RX 5700 OC 8 GB
      Audio: ALC 1150
      Ethernet: I219V2, I211-AT
      WiFi & Bluetooth: Broadcom BCM94360HMB Half-Mini-PCI-E
      More Specs: https://www.asus.com/Motherboards/Z170-DELUXE/specifications/
       
      Catalina 10.15.2 - Windows 10
      What is working:
      BCM94360HMB Wifi and Bluetooth AirDrop, Handoff, FaceTime, Messages, App Store, iCloud, etc. Intel HD 530 (QE/CI tested, but now I'm using it in headless) Sleep RX 5700 (QE/CI with 2 1080p monitors connected) Sound USB Ports Two Ethernet ports macOS with a light OC (4.12 GHz - 4.5 Ghz, XMP, ASUS optimal) No problem so far ASUS HyperKit with a KINGSTON NVMe SSD - 250 GB  
      What is not working:
      -  
       
      Not tested:
      VideoProc says that Hardware Decoding\Encoding is fully supported and enabled on both HD 530 and RX 5700 but I didn't test it Thunderbolt (no equipment)  
      Issues:
      None  
      BIOS Settings:
      Boot\CSM (Compatibility Support Module): Launch CSM: Disabled Boot\Secure Boot: OS type: Other OS Secure Boot State: Disabled Advanced\System agent (sa) Configuration: VT-d: Enabled Graphics Configuration: Primary Display: Auto iGPU Multi-monitor: Enabled RC6(Render Standby): Enabled DVMT Pre-Allocated: 128M Advanced\PCH Storage Configuration: SATA Mode Selection: AHCI HyperKit: Enable (if you have NVMe SSD with ASUS HyperKit) Advanced\CPU Configuration: Intel Virtualization Technology: Enabled CPU- Power Management Control: Intel SpeedStep: Enabled CPU- C-States: Enabled Intel SpeedShift: Enabled  
      Getting ready for installation:
      Download the bootpack (Clover v5098): Click here -> ASUS-Z170_catalina.zip  
      Installation:
      Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager) Copy my Clover folder to the USB's EFI folder Boot with the Installer USB If you have any problem (kp or freeze) boot with config_debug.plist to see what causes the issue  
      Post Installation:
      Download Clover Configurator and generate a new Serial Number for yourself  
      Some pictures:
       

       




       
       
       
      Catalina & Windows 10 Dual-Boot (clean install, on one drive):
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac)
       Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart
      Boot into your Win installer, Format the partition you created for Win, install. 
      Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: 
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
      You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      Mounting EFI from Windows:
      Open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Total Commander or Explorer++ in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI)  
      Notes:
       
      2020.01.19: Added ASUS HyperKit NVMe SSD to the "What is working" list
      2020.01.12: Tested system with OC, added more informations to BIOS settings
      2020.01.11: Added SmallTreeIntel82576.kext for 2nd Ethernet, Tested Ethernet ports
      2020.01.11: First upload
       
×