Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / SkyLake / KabyLake / CoffeeLake DSDT

5,428 posts in this topic

Recommended Posts

6 hours ago, tarbax said:

can anyone help me with my EFI ?

my system is working with the following problems:

I have gpu fan speed problems
and random having digital snow on reboot (gpu memory problem?)
no hardware monitoring
no sound from the motherboard

 

  • CPU - Intel - Core i9-9900K 3.6 GHz 8-Core Processor
  • Motherboard - Gigabyte - Z390 M GAMING Micro ATX LGA1151 Motherboard
  • Memory - Corsair - Vengeance LPX 32 GB (2 x 16 GB) DDR4-3000 Memory
  • Boot Storage - Samsung - 970 Pro 1 TB M.2-2280 Solid State Drive
  • Video Card - Asus - Radeon RX VEGA 64 8 GB ROG STRIX Video Card

tarbax's 8K nator.zip

1- Replace Full Clover Folder
2- Install Clover again with correct options
3- Reboot
4- Extract new Send_me

CLOVER.zip
Last Clover Version UEFI
La5CMRr.png

Share this post


Link to post
Share on other sites
Advertisement
2 hours ago, kai19879 said:

Hi @MaLd0n, please help with DSDT.
Please tell me why the airplay does not work and I can not watch purchased films in itunes just a black screen. 

Send me iMac-admin.zip

1- Replace Full Clover Folder
2- Install Clover again with correct options
3- Reboot
4- Extract new Send_me

CLOVER.zip
Last Clover Version UEFI
La5CMRr.png

 

enable intelHD in bios/uefi

Share this post


Link to post
Share on other sites
2 hours ago, MaLd0n said:

clear nvram with f11 key in clover boot screen

Pressed f11 in clover it reboots and gives the same error again

Share this post


Link to post
Share on other sites
1 hour ago, tarbax said:

Pressed f11 in clover it reboots and gives the same error again

what u change in bios/uefi setup?

 

use in default, just enable intelHD for intel quick sync, nothing more

Share this post


Link to post
Share on other sites
20 hours ago, MaLd0n said:

1- Replace Full Clover Folder
2- Install Clover again with correct options
3- Reboot
4- Extract new Send_me

CLOVER.zip
Last Clover Version UEFI
La5CMRr.png

 

enable intelHD in bios/uefi

when I select enable, clover does not load and goes into reboot.

When sel auto it's good, but itunes whatever dont show film.

And i can't find airplay.

Does not wake up from sleep.

Send me iMac-admin.zip

2019-04-22 20-18-25.JPG

Edited by kai19879

Share this post


Link to post
Share on other sites
On 4/22/2019 at 7:00 PM, MaLd0n said:

what u change in bios/uefi setup?

 

use in default, just enable intelHD for intel quick sync, nothing more

This is what I now get:

20190424_174105.jpg

Share this post


Link to post
Share on other sites
4 minutes ago, kai19879 said:

Yes. Ga z270-hd3 bios v. f9d 09/03/2018

remove edited dsdt, reboot, enable intelhd, extract new send_me

Share this post


Link to post
Share on other sites
17 minutes ago, MaLd0n said:

remove edited dsdt, reboot, enable intelhd, extract new send_me

Send me iMac-admin.zip

dsdt in efi removed.

if i select enable in internal graphics ENABLE pc reboots before boot clover. if i select auto as in the screenshot earlier pc boot normal.

 

Share this post


Link to post
Share on other sites
9 minutes ago, MaLd0n said:

Thank you, but itunes stiil not show films.
And VDADecoderChecker show

Last login: Sat Apr 27 00:18:38 on ttys001

iMac-admin:~ admin$ /Users/admin/Downloads/VDADecoderChecker ; exit;

AVDCreateGPUAccelerator: Error loading GPU renderer

VDADecoderCreate failed. err: -12473

An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process.

VDADecoderCreate failed. err: -12473

logout

Saving session...

...copying shared history...

...saving history...truncating history files...

...completed.

Share this post


Link to post
Share on other sites
26 minutes ago, kai19879 said:

Thank you, but itunes stiil not show films.
And VDADecoderChecker show

Last login: Sat Apr 27 00:18:38 on ttys001

iMac-admin:~ admin$ /Users/admin/Downloads/VDADecoderChecker ; exit;

AVDCreateGPUAccelerator: Error loading GPU renderer

VDADecoderCreate failed. err: -12473

An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process.

VDADecoderCreate failed. err: -12473

logout

Saving session...

...copying shared history...

...saving history...truncating history files...

...completed.

without igpu u need check other way

Share this post


Link to post
Share on other sites
14 hours ago, MaLd0n said:

without igpu u need check other way

Hi! I enable intel hd graphics. To do this, I reinstalled the clover and transferred to it the files you gave me (drivers, kext, config.plist) then restart with enabled graphics stopped

but itunes still not work.  Do you have ideas?

 

screenshots.zip

Send me iMac-admin.zip

Share this post


Link to post
Share on other sites
3 minutes ago, kai19879 said:

Hi! I enable intel hd graphics. To do this, I reinstalled the clover and transferred to it the files you gave me (drivers, kext, config.plist) then restart with enabled graphics stopped

but itunes still not work.  Do you have ideas?

 

screenshots.zip

Send me iMac-admin.zip

remove intelgfx, ig-platform-id and injectintel, let the bootloader and kexts work

Share this post


Link to post
Share on other sites
1 hour ago, MaLd0n said:

remove intelgfx, ig-platform-id and injectintel, let the bootloader and kexts work

it's not work 

Last login: Sat Apr 27 16:01:47 on console

iMac-admin:~ admin$ /Users/admin/Downloads/VDADecoderChecker ; exit;

GVA error: Not detecting IGPU in IORegistry!

GVA error: Not detecting valid offline codec!

AVDCreateGPUAccelerator: Error loading GPU renderer

VDADecoderCreate failed. err: -12473

An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process.

VDADecoderCreate failed. err: -12473

logout

Saving session...

...copying shared history...

...saving history...truncating history files...

...completed.

 

 

i recover ntelgfx, ig-platform-id and injectintel and converter work fine but not itunes.

airplay work, i connected monitor across hdmi

1.png

Edited by kai19879

Share this post


Link to post
Share on other sites

@MaLd0n 

how i can fix sleep and wake up?

Now the computer goes to sleep, turns off and can not Wake up, while it does not turn off and does not start boot.  It can spend hours to work.

Thank you.

Share this post


Link to post
Share on other sites

@MaLd0n This is my PC Specifications...

intel Core i7 6700K Skylake.
MSI Z170A Gaming M5 Motherboard.
MSI GTX 1080 Gaming X GPU. (want to get this to work)

 

Currently, I am on High Sierra 10.3.6 Build 17G2208.

 

Everything is working fine except for the nVidia GPU as I can't install the driver due to the Build version not being supported.

 

Also, I have attached my Files if you could please take a look at the DSDT

Send me Shanes-iMac.zip

Share this post


Link to post
Share on other sites
4 hours ago, ShanerWarner said:

@MaLd0n This is my PC Specifications...

intel Core i7 6700K Skylake.
MSI Z170A Gaming M5 Motherboard.
MSI GTX 1080 Gaming X GPU. (want to get this to work)

 

Currently, I am on High Sierra 10.3.6 Build 17G2208.

 

Everything is working fine except for the nVidia GPU as I can't install the driver due to the Build version not being supported.

 

Also, I have attached my Files if you could please take a look at the DSDT

Send me Shanes-iMac.zip

DSDT.aml.zip

run it

https://olarila.com/files/Utils/nvidia-update.command.zip

and it

https://olarila.com/files/Utils/RepairPermissions.zip

Share this post


Link to post
Share on other sites
6 hours ago, MaLd0n said:

 

@MaLd0n Thanks a ton for the DSDT, everything seems to be working ok now, USB/Nvidia graphics.

 

I wanted to know in the DSDT that you rectified, there is just one error that pops up upon compilation. I would like to know what that is, if it would affect the performance.

 

I've highlighted the line.

 

Compiler Error.png

DSDT Error Line.png

Share this post


Link to post
Share on other sites
10 hours ago, ShanerWarner said:

 

@MaLd0n Thanks a ton for the DSDT, everything seems to be working ok now, USB/Nvidia graphics.

 

I wanted to know in the DSDT that you rectified, there is just one error that pops up upon compilation. I would like to know what that is, if it would affect the performance.

 

I've highlighted the line.

https://github.com/acidanthera/MaciASL

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
        Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell   https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Skylake, Kabylake and Coffeelake is here https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By slapbass_
      Hello friends and teachers of the blessed hackintosh, I hope you are well .......... I want to ask you please, can someone of you help me with my blessed laptop? ..... Some things are missing to activate for example: - brightness indicator: when you press the button, the indicator does not appear on the screen increasing or decreasing brightness. - battery indicator: when connecting the charger, you must activate the beam and go up, from bottom to top when charging, right? but it DOESN'T move - the laptop camera is NOT activated - Bluetooth NOT activated - SD card reader NOT activated optimize the laptop so that it starts when starting the system in less time. why is it taking a minute and 5 seconds (more or less)..... I will be infinitely grateful to you dear friends, Here is my RunMe from my LAPTOP regards blessings Here are my specs: Dell Inspiron 14 5000 series (5458) - Intel (R) Core (TM) i5-5200U CPU at 2.20GHz - Ram 4GB » - Intel HD Graphics 5500 - PCI Network: Intel Dual Band Wireless-AC 3160 AC HMC WiFi WiFi Adapter Realtek RTL8139 / 810x Fast Ethernet Adapter - Audio Intel Broadwell HDMI @ Intel Broadwell - Mini HD Audio Realtek ALC255 @ Intel Wildcat Point-LP PCH High definition ......... I would infinitely appreciate your help friends regards blessings My RunMe-my friends.zip
×