Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / 400 SkyLake / KabyLake / CoffeeLake / CometLake DSDT

5,429 posts in this topic

Recommended Posts

Advertisement
3 hours ago, Thomas126 said:

Tried it and is working atm. Thanks a lot mate. Still laggy in Safari and full screen video playback. Any suggestions?

nvidia-update.command.zip

1 hour ago, gjn said:

The issue is solved, we had to put the thumb-drive directly on an USB socket on the mobo. Thanks anyway!

;)

Share this post


Link to post
Share on other sites

black screen when installing the system.

 

All In One 23,8", i5-6400 - (2,7GHz)  , RAM 16GB DDR4 2133Mhz, SSD 128GB + SSD 256GB -, GeForce GTX 950A - 4GB

osx.jpg

Share this post


Link to post
Share on other sites
17 minutes ago, petr said:

black screen when installing the systemimageproxy.php?img=&key=c17464ef1b1b51c7.

 

All In One 23,8", i5-6400 - (2,7GHz)  , RAM 16GB DDR4 2133Mhz, SSD 128GB + SSD 256GB -, GeForce GTX 950A - 4GB

osx.jpg

u can disable intelHDGraphics in bios?

Share this post


Link to post
Share on other sites
9 minutes ago, petr said:

there is no way to disable intelHDGraphics in bios :-(

all in one, the bios is like notebooks, in some cases we need disable Nvidia/Amd and use IntelHDGraphics. Confirm it!

Share this post


Link to post
Share on other sites

Thank you very much for trying, but I'm going to try but it's too complicated for me

Share this post


Link to post
Share on other sites
14 minutes ago, petr said:

Thank you very much for trying, but I'm going to try but it's too complicated for me

check in windows system what device nvidia gpu use

Share this post


Link to post
Share on other sites

intel HD Graphics 530

GeForce GTX 950A

-----------------------------------------------

_SB.PC10.PEG0.PEGP

Share this post


Link to post
Share on other sites
29 minutes ago, petr said:

intel HD Graphics 530

GeForce GTX 950A

-----------------------------------------------

_SB.PC10.PEG0.PEGP

try

http://www69.zippyshare.com/v/WW7FNYOj/file.html
 

24 minutes ago, corbiz said:

Hey mald0n
Where cane see success fully DSDT patched in system report

Sent from my GT-I9195 using Tapatalk
 

??? repo?

Share this post


Link to post
Share on other sites
35 minutes ago, corbiz said:

about mac >system report

Sent from my GT-I9195 using Tapatalk
 

u need check in ioreg and rape table

19 minutes ago, YoYelloW said:

Mal, i still have an issue with one of my systems, all works fine, except bluetooth is not finding any devices. any idea on how to fix this?

In using an BCM943602BAED/DW1830 which should work..

https://stack.yoyellow.nl/s/yGwmUJGjUi9gxGO

https://stack.yoyellow.nl/s/oq3cUkP1DjMg3Eq

https://bitbucket.org/RehabMan/os-x-brcmpatchram

Share this post


Link to post
Share on other sites

babilu's MacBook Pro.ioregHi Maldon.

I have a new setup.

S14 S410UN with i5-8250u, SSD 512MB SATA, 2TB HDD 

SSD with EFI for win10

2TB HDD for cloverefi , osx, osx recovery, DATA, installer high Sierra

babilu's MacBook Pro.ioregbabilu's MacBook Pro.ioreg

Condition works:

1. Wake / suspend / off look like ok

2. Fn Function works

3. Backlight screen works look lkely ok [but black-sudden light bright not smooth) 4. Backlight keyboard works via # Backlight 4 step Patch by EMlyDinEsH (www.osxlatitude.com)

5. Battery acpi works but have a problem not updating the percentage simultaneously.

6. Keyboard ok, Touchpad Elan 1300 with patching on DSDT and installing Voodooi2c special (with ELAN 1300 patch) and Voodooi2cHID on clover. Did i patching dsdt correct?

7. i dont know which config.plist optimized. i have 4 config.

    first install using clover default plist for installing part 1 (copy to hdd) -2(installing/configuring), using spoof.aml

    and part 3(setting user) for booting first time i had use the s15 510 config.plist for disabling the mx150 graphics loaded.

    the config.620.plist  working only after _ini patch otherwise user 38 or something look like FakeID not there.

8. disabled the mx150 via ssdt-8.aml _ini only, however off and reg patch not used, because weird no method there etc. please check out for me.

 

Plan next:

1. Which config.plist optimal for me, macbook air or macbookpro 13,1, and what patching on plist  i clicked for optimal

2. USB power not configured via dsdt? could you help for me?

3. Please check my modified dsdt / ssdt for battery moving and mx150 disabled, voodooi2c also.

   I removed both AppleI2C kext and AppleHPM.kext? replaced with  Voodooi2c kext? Did i need to removed those three kext original on S./L./E

4. What my connexant type? i want to patch hdapatcher since voodooHDA seems crackle. how to find the model? must have linux live usb ? (maybe OOT)

5. What ssdt patch do i need? can you check my patched dsdt. and my ioreg. Does it correct / optimized?

 

I uploading the clover consisting dsdt original and patched ones....wait

 

CLOVER :

http://www40.zippyshare.com/v/LCJKwAAF/file.html

 

 

babilu's MacBook Pro.zip

Edited by Babiloe
upload failed

Share this post


Link to post
Share on other sites
9 minutes ago, Babiloe said:

Hi Maldon.

I have a new setup.

S14 S410UN with i7-8250u

 


	ELAN WBF Fingerprint Sensor ACPI\VEN_ELAN&DEV_7001 \_SB.PCI0.SPI0.FPRT
Qualcomm Atheros Bluetooth 4.1 USB\VID_13D3&PID_3491&REV_0001 \_SB.PCI0.XHC.RHUB.HS08
USB Video Device Webcam USB\VID_13D3&PID_5A07&REV_1701&MI_00  \_SB.PCI0.XHC.RHUB.HS06.DCAM
Intel(R) UHD Graphics 620 PCI\VEN_8086&DEV_5917&SUBSYS_1C501043&REV_07 \_SB.PCI0.GFX0
NVIDIA GeForce MX150 PCI\VEN_10DE&DEV_1D10&SUBSYS_15AE1043&REV_A1 \_SB.PCI0.RP01.PEGP
Intel(R) 6th Generation Core Processor Family Platform I/O SATA AHCI Controller PCI\VEN_8086&DEV_9D03&SUBSYS_1C501043&REV_21 \_SB.PCI0.SAT0
Intel(R) Dynamic Platform and Thermal Framework Generic Participant ACPI\VEN_INT&DEV_3403 \_SB.PCI0.LPCB.EC0.SEN1 \_SB.PCI0.LPCB.EC0.SEN3 \_SB.PCI0.B0D4
Intel(R) Dynamic Platform and Thermal Framework Manager ACPI\VEN_INT&DEV_3400 \_SB.IETM
Qualcomm Atheros QCA9377 Wireless Network Adapter PCI\VEN_168C&DEV_0042&SUBSYS_22311A3B&REV_31 \_SB.PCI0.RP06.PXSX
usb3 USB xHCI Compliant Host Controller PCI\VEN_8086&DEV_9D2F&SUBSYS_201F1043&REV_21 \_SB.PCI0.XHC
Intel(R) Management Engine Interface  PCI\VEN_8086&DEV_9D3A&SUBSYS_1C501043&REV_21 \_SB.PCI0.HECI
PCI Express Root Complex ACPI\VEN_PNP&DEV_0A08 \_SB.PCI0
Intel(R) Serial IO GPIO Host Controller - INT344B ACPI\VEN_INT&DEV_344B \_SB.PCI0.GPI0
Intel(R) Serial IO I2C Host Controller ELAN 1300 - 9D60 PCI\VEN_8086&DEV_9D60&SUBSYS_1C501043&REV_21 \_SB.PCI0.I2C0
Intel(R) Serial IO I2C Host Controller - 9D61 PCI\VEN_8086&DEV_9D61&SUBSYS_1C501043&REV_21 \_SB.PCI0.I2C1
Intel(R) Serial IO SPI Host Controller - 9D29 PCI\VEN_8086&DEV_9D29&SUBSYS_1D2D1043&REV_21 \_SB.PCI0.SPI0
ACPI Lid ACPI\VEN_PNP&DEV_0C0D \_SB.PCI0.LPCB.EC0.LID
Intel(R) Serial IO GPIO Host Controller - INT344B   ACPI\VEN_INT&DEV_344B  \_SB.PCI0.GPI0
	Conexxant Smart Audio HDHDAUDIO\FUNC_01&VEN_14F1&DEV_1F72&SUBSYS_10431C50&REV_1000
	

 

Condition works:

1. Wake / suspend / off look like ok

2. Fn Function works

3. Backlight screen works look lkely ok [but black-sudden light bright not smooth) 4. Backlight keyboard works via # Backlight 4 step Patch by EMlyDinEsH (www.osxlatitude.com)

5. Battery acpi works but have a problem not updating the percentage simultaneously.

6. Keyboard ok, Touchpad Elan 1300 with patching on DSDT and installing Voodooi2c special (with ELAN 1300 patch) and Voodooi2cHID on clover. Did i patching dsdt correct?

7. i dont know which config.plist optimized. i have 4 config.

    first install using clover default plist for installing part 1 (copy to hdd) -2(installing/configuring), using spoof.aml

    and part 3(setting user) for booting first time i had use the s15 510 config.plist for disabling the mx150 graphics loaded.

    the config.620.plist  working only after _ini patch otherwise user 38 or something look like FakeID not there.

8. disabled the mx150 via ssdt-8.aml _ini only, however off and reg patch not used, because weird no method there etc. please check out for me.

 

Plan next:

1. Which config.plist optimal for me, macbook air or macbookpro 13,1, and what patching on plist  i clicked for optimal

2. USB power not configured via dsdt? could you help for me?

3. Please check my modified dsdt / ssdt for battery moving and mx150 disabled, voodooi2c also.

   I removed both AppleI2C kext and AppleHPM.kext? replaced with  Voodooi2c kext? Did i need to removed those three kext original on S./L./E

4. What my connexant type? i want to patch hdapatcher since voodooHDA seems crackle. how to find the model? must have linux live usb ? (maybe OOT)

5. What ssdt patch do i need? can you check my patched dsdt. and my ioreg. Does it correct / optimized?

 

I uploading the clover consisting dsdt original and patched ones....wait

 

 

send me files

RunMe.app.zip

up in http://www.zippyshare.com/

u can use nvidia or only intel HD?

Share this post


Link to post
Share on other sites

the installation was finally run but I can not install (the recovery server can not be contacted)

Share this post


Link to post
Share on other sites
19 minutes ago, MaLd0n said:

send me files

RunMe.app.zip

up in http://www.zippyshare.com/

u can use nvidia or only intel HD?

Sent me files

http://www40.zippyshare.com/v/LCJKwAAF/file.html

 

Optimus type MX150 Nvidia and UHD 620 5917 not 5916...

So I think I can run 620 intel only as rehab man told. dO I need change dsdt or IGPu dsl to 5917 instead of 5916? 

Edited by Babiloe
I think intel only...cause Optimus prime

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9400K, 9600K, 9700K, 9900K, 9900KS (All KF Models work but use SMBios iMacPro1,1 instead)
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, RX 5500, 5500 XT, 5600, 5600 XT, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM94360CS2 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      CLOVER & OPENCORE EFIs 
      Current EFIs Updated 04/05/2020
       
       
      Clover EFI Update v5115 - 04/05/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
       
      Clover Z390 Master Navi Vega EFI 040520.zip - Vega, Navi (5700, 5700XT etc), Radeon VII DSDT EFI
      Clover Z390 Master Polaris EFI 040520.zip - RX500 Polaris Series (RX590, 580, 570 etc) DSDT EFI
       
      Please Note - I have now set KernelPM to No as standard so if you don’t have a unlocked MSR or not using my MSR Unlocked Bios Profile then go into the Clover Config.plist and set KernelPM to Yes or you won’t be able to boot up. An even better fix would be to unlock your MSR using my profile method.
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
       
       
      OpenCore EFI Update v0.5.8 - 04/05/2020
      Myself and @texem have now created a OpenCore EFI done the way the OpenCore Devs intended it to be made, There is no DSDT in use so you can use this EFI on any supported GPU and the SSDTs have been made so they will not be used in any other Operating System apart from MacOS.
       
      OpenCore 058 Z390 Master 19,1 040520.zip - OpenCore v0.5.8, SMBios iMac19,1
      OpenCore 058 Z390 Master 1,1 040520.zip - OpenCore v0.5.8, SMBios iMacPro1,1 (IGPU Disabled)
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
       
       
      PlistEdit Pro.zip - PlistEdit Pro (use to edit OpenCore)
       
      Using PlistEdit Pro add your details by modifying the following 

       
      PLEASE NOTE - These EFIs are setup to be used with your msr Unlocked so make sure you use the F11c Unlocked Profile but if for any reason you can not unlock MSR then just modify following in the OpenCore config.plist :
      
       
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       

       

       

       

       

       

       

       
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
        Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell   https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Skylake, Kabylake and Coffeelake is here https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
×