Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / 400 SkyLake / KabyLake / CoffeeLake / CometLake DSDT

5,430 posts in this topic

Recommended Posts

Advertisement
Just now, MaLd0n said:

looks good

u disable onboard audio?

Thank you very much. Yes, I did. There are two options HDMI and SPDIF, I didn't know what to choose :) Shall I enable it? By the way, can I use the same clover folder you prepared while overclocked?

Share this post


Link to post
Share on other sites
1 minute ago, ygtaldmr said:

Thank you very much. Yes, I did. There are two options HDMI and SPDIF, I didn't know what to choose :) Shall I enable it? By the way, can I use the same clover folder you prepared while overclocked?

yes, same folder

Share this post


Link to post
Share on other sites
Just now, MaLd0n said:

yes, same folder

Great, you are hero man. One last question, Will it be ok if I use Fakesmc Plugins to monitor fan speeds etc. or not?

Share this post


Link to post
Share on other sites
2 minutes ago, ygtaldmr said:

Great, you are hero man. One last question, Will it be ok if I use Fakesmc Plugins to monitor fan speeds etc. or not?

use, if have problems, remove

Share this post


Link to post
Share on other sites
10 minutes ago, ygtaldmr said:

Ok, I will. Thanks again MaLd0n, I really appreciate your help.

welcome

enjoy

Share this post


Link to post
Share on other sites
1 hour ago, Louievicl said:

Hi MalDon can you please help me patch my DSDT? here's my dump extracted to my Desktop

my System is
Mobo: ASUS PRIME Z270-A
CPU: Intel i7 7700 @3.60GHz
GPU: Gigabyte Nvidia GTX 1070 86B
https://drive.google.com/file/d/16Qb059T2SPQNrgwxezvZVxpT2sBSNGGS/view

replace, reboot

http://www119.zippyshare.com/v/KJPUbggZ/file.html
 

1 hour ago, taluyka said:

Hi MaLd0n,

I have i7 6700K, Asus Z170-A, AMD HD 7850 and SMBIOS iMac 17,1.

Here is my DSDT: https://mega.nz/#!Qj4iSZYJ!VT8fzkyEe6ShcOptitjaqvWMJ32E0Xt7cCTrr94yn08

 

Thanks for ur help.

DSDT.aml.zip

use 

change GFX0 to IGPU
47465830 
49475055 

change HDAS to HDEF
48444153 
48444546 

change HECI to IMEI
48454349 
494d4549 

change SAT0 to SATA
53415430 
53415441 

Share this post


Link to post
Share on other sites
21 hours ago, MaLd0n said:

i think is a bios config or smbios, i use iMacPro and beta 10.13.4

u need a tests

Hi MadL0n

I did some tests. I did a full reinstall of the latest 10.3.3 and because the nVidia driver needed to installed as last I decided to see if the intel UHD 630 was visible in MacX VC and it was. The check of VDADecoderChecker was failed with code -12473.

When I installed the video drivers for the GTX1080Ti the video card displayed as render device shifted to the Nvidia GTX1080Ti. See below. So the difference is that your AMD RX580 won't show up keeping the UHD630 as render device. In my case the GTX1080Ti is displayed.  read somewhere that the ig-Platform-id is related with how the system is configured. Intel only (0x59120000) or it needs to be (0x59120003). Is this maybe the problem? That the 0x59120003 needs to be something else?

Cheers

Screen Shot 2018-03-21 at 01.05.00.png

Screen Shot 2018-03-21 at 01.13.33.png

Screen Shot 2018-03-21 at 01.25.53.png

Share this post


Link to post
Share on other sites
23 minutes ago, Pluskat5000Schiffe said:

Hi MadL0n

I did some tests. I did a full reinstall of the latest 10.3.3 and because the nVidia driver needed to installed as last I decided to see if the intel UHD 630 was visible in MacX VC and it was. The check of VDADecoderChecker was failed with code -12473.

When I installed the video drivers for the GTX1080Ti the video card displayed as render device shifted to the Nvidia GTX1080Ti. See below. So the difference is that your AMD RX580 won't show up keeping the UHD630 as render device. In my case the GTX1080Ti is displayed.  read somewhere that the ig-Platform-id is related with how the system is configured. Intel only (0x59120000) or it needs to be (0x59120003). Is this maybe the problem? That the 0x59120003 needs to be something else?

Cheers

Screen Shot 2018-03-21 at 01.05.00.png

Screen Shot 2018-03-21 at 01.13.33.png

Screen Shot 2018-03-21 at 01.25.53.png

my hack with nvidia processor dont have igpu, i never test with nvidia

Share this post


Link to post
Share on other sites
my hack with nvidia processor dont have igpu, i never test with nvidia
Hi mald0n
How to Hardware encoder enable with nvidia gt1030 ?
ThNks advance

Sent from my GT-I9195 using Tapatalk

Share this post


Link to post
Share on other sites
On 3/16/2018 at 3:14 AM, MaLd0n said:

Hi, i buy one today, Gigabyte  Z370 HD3, perfect, all mobos work fine, we just need some patches, configs and work good

How's the Gigabyte  Z370 HD3 installation going?

Thanks!

Share this post


Link to post
Share on other sites
13 hours ago, MaLd0n said:

DSDT.aml.zip

use 

change GFX0 to IGPU
47465830 
49475055 

change HDAS to HDEF
48444153 
48444546 

change HECI to IMEI
48454349 
494d4549 

change SAT0 to SATA
53415430 
53415441 

 

Thanks man, it's working.

Edited by taluyka

Share this post


Link to post
Share on other sites
10 hours ago, corbiz said:

Hi mald0n
How to Hardware encoder enable with nvidia gt1030 ?
ThNks advance

Sent from my GT-I9195 using Tapatalk
 

i'm using RX5xx now, my hack with nvidia don't have IGPU

2 hours ago, zzmadd said:

How's the Gigabyte  Z370 HD3 installation going?

Thanks!

what problem u have? disable serial port in bios for installation?

55 minutes ago, taluyka said:

 

Thanks man, it's working.

Welcome!

Enjoy!

Share this post


Link to post
Share on other sites
18 minutes ago, MaLd0n said:

what problem u have? disable serial port in bios for installation?

I was asking about the Gigabyte  Z370 HD3 because I'm going to buy it in a few days...

was curious to know if you had bought it and how was the installation going...

Thanks

Share this post


Link to post
Share on other sites
3 minutes ago, zzmadd said:

I was asking about the Gigabyte  Z370 HD3 because I'm going to buy it in a few days...

was curious to know if you had bought it and how was the installation going...

Thanks

just install, i have same mobo

update for last bios and i sent my folder for u

Share this post


Link to post
Share on other sites
Just now, MaLd0n said:

just install, i have same mobo

update for last bios and i sent my folder for u

Thanks a lot buddy!

I will have an i5-8400 looking to use internal graphics.

What Cpu do you mount?

Share this post


Link to post
Share on other sites
3 hours ago, zzmadd said:

Thanks a lot buddy!

I will have an i5-8400 looking to use internal graphics.

What Cpu do you mount?

8700K

Share this post


Link to post
Share on other sites

CLOVER.zip@MaLd0n

I successfully installed Mac OS High Sierra on my machine. In generally it is working but in my opinion all very slow. Don't know what causes the system to be that slow. Also iBooks does not sync my self created cloud library. Can you help me out? Is my Clover setup good?

System:
Intel Core i5-7600K, 4x 3.80GHz, boxed ohne Kühler (BX80677I57600K)
Corsair Vengeance LPX schwarz DIMM Kit 16GB, DDR4-3000, CL15-17-17-35
MSI GeForce GTX 1070 Gaming X 8G, 8GB GDDR5, DVI, HDMI, 3x DisplayPort (V330-001R)
MSI Z270 Gaming M5 (7A78-001R)
NZXT Kraken X62 (RL-KRX62-01)
Samsung SSD 850 EVO 250GB, SATA
be quiet! Pure Power 10 500W ATX 2.4 (BN273)
JUSTOP ABWB-050815 ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS Combo Card For Hackintosh (MAC OS X) Airport Computers, Supports Hands-off (Computers & Accessories)

http://www114.zippyshare.com/v/Zd2tXcMT/file.html
 

Already followed a guide concerning PM on intel CPUs. Didn't experience any difference... Nvidia GPU seems to work fine.

 

Share this post


Link to post
Share on other sites
1 hour ago, Thomas126 said:

CLOVER.zip@MaLd0n

I successfully installed Mac OS High Sierra on my machine. In generally it is working but in my opinion all very slow. Don't know what causes the system to be that slow. Also iBooks does not sync my self created cloud library. Can you help me out? Is my Clover setup good?

System:
Intel Core i5-7600K, 4x 3.80GHz, boxed ohne Kühler (BX80677I57600K)
Corsair Vengeance LPX schwarz DIMM Kit 16GB, DDR4-3000, CL15-17-17-35
MSI GeForce GTX 1070 Gaming X 8G, 8GB GDDR5, DVI, HDMI, 3x DisplayPort (V330-001R)
MSI Z270 Gaming M5 (7A78-001R)
NZXT Kraken X62 (RL-KRX62-01)
Samsung SSD 850 EVO 250GB, SATA
be quiet! Pure Power 10 500W ATX 2.4 (BN273)
JUSTOP ABWB-050815 ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS Combo Card For Hackintosh (MAC OS X) Airport Computers, Supports Hands-off (Computers & Accessories)

http://www114.zippyshare.com/v/Zd2tXcMT/file.html
 

Already followed a guide concerning PM on intel CPUs. Didn't experience any difference... Nvidia GPU seems to work fine.

 

http://www41.zippyshare.com/v/j0fXkIfQ/file.html
 

Share this post


Link to post
Share on other sites

Hi! Im having problems starting the High Sierra installer, but it gets stuck on the progress bar. I probably do not have the correct settings Clover.

The hardware Im using is

i7-6700K
Maximus Hero VIII
MSI GEFORCE 1070
16GB RAM

 

The text showing up on verbose startup is

MAC Framework successfully initialized
ACPI Warning: IOAPIC: Version 0x20 Vectors 64:111
GPE _L37 has no implementation (20160930/evgpeinit-465)
ACPI Warning: GPE _L6B has no implementation (20160930/evgpeinit-465)
ACPI: Executed 35 blocks of module-level executable AML code
ACPI: sleep states S3 S4 S5
pci (build 09:27:03 Dec 17 2017), flags 0xe3080
HID: Legacy shim 2
FakeSMC v6.26-322-g1bconsole relocated to 0x7f910000000
[ PCI configuration end, bridges 6, devices 13 ]
000001.447762 AppleUSBLegacyRoot@: Appl

 

Any suggestions, or configuration file for the hardware Ive got?

Share this post


Link to post
Share on other sites
9 minutes ago, gjn said:

Hi! Im having problems starting the High Sierra installer, but it gets stuck on the progress bar. I probably do not have the correct settings Clover.

The hardware Im using is

i7-6700K
Maximus Hero VIII
MSI GEFORCE 1070
16GB RAM

 

The text showing up on verbose startup is

MAC Framework successfully initialized
ACPI Warning: IOAPIC: Version 0x20 Vectors 64:111
GPE _L37 has no implementation (20160930/evgpeinit-465)
ACPI Warning: GPE _L6B has no implementation (20160930/evgpeinit-465)
ACPI: Executed 35 blocks of module-level executable AML code
ACPI: sleep states S3 S4 S5
pci (build 09:27:03 Dec 17 2017), flags 0xe3080
HID: Legacy shim 2
FakeSMC v6.26-322-g1bconsole relocated to 0x7f910000000
[ PCI configuration end, bridges 6, devices 13 ]
000001.447762 AppleUSBLegacyRoot@: Appl

 

Any suggestions, or configuration file for the hardware Ive got?imageproxy.php?img=&key=c17464ef1b1b51c7imageproxy.php?img=&key=c17464ef1b1b51c7

u try clover folder from first post?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By Lakkantha
      i install mac Catalina osx but can't boot without fake intel inject. And no audio or wifi. Can you help to make my clover config please
      Efi folder
       


    • By rawmassen
      Hi there,
       
      If anyone could help I'd be very grateful, I'm trying to move from Clover to OC but have hit a brick wall for the last 2 days.
       
      It's an ACPI table error: SB_.PCIO.XHC_RHUB.HS11, Namespace lookup failure.
       


      Skylake Build:
      OpenCore 0.5.9
      Mojave 10.14.6, iMac17,1
      Asus Maximus Hero VIII
      6700K
       
      I've attached the config.plist and ACPI folder.
       
      EFI Drivers: OpenRuntime.efi and HfsPlus.efi
      Kexts: IntelMausi, Lilu, VirtualSMC, Whatevergreen
       
      Things I've tried...
       
      1) Clearing NVRAM (as it was previously booted by Clover)
       
      2) Hackintool USB Mapping: both the SSDT files and the USBPorts.kext
       
      3) USBInjectAll.kext (with and without SSDT files)
       
      4) SSDT-RHUB.aml. This seems to be directly involved, spent a long time with this but with no luck.
       
      I followed this guide:
       
      https://dortania.github.io/Getting-Started-With-ACPI/Universal/rhub-methods/manual.html
       
      Everything is XHC in my DSDT, except these definitions at the top (line 72 and 73):
       
          External (_SB_.PCI0.XHC_.DUAM, MethodObj)    // Warning: Unknown method, guessing 0 arguments     External (_SB_.PCI0.XHC_.RHUB.INIR, MethodObj)    // Warning: Unknown method, guessing 0 arguments  
      So I edited the SSDT-RHUB.dsl to this:
       
      /* * Goal of this SSDT is to shut off the RHUB to force macOS into * manually building ports when the ACPI is screwed up */ DefinitionBlock ("", "SSDT", 2, "DRTNIA", "RhubOff", 0x00001000) { External (_SB_.PCI0.XHC.RHUB, DeviceObj) // Full pathing to RHUB, change to yours Scope (_SB.PCI0.XHC.RHUB) // Full pathing to RHUB, change to yours { Method (_STA, 0, NotSerialized) { If (_OSI ("Darwin")) { Return (Zero) // This disables the device only in macOS } Else { } } } } Which results in this AML version:
      DefinitionBlock ("", "SSDT", 2, "DRTNIA", "RhubOff", 0x00001000) { External (_SB_.PCI0.XHC_.RHUB, DeviceObj) Scope (_SB.PCI0.XHC.RHUB) { Method (_STA, 0, NotSerialized) // _STA: Status { If (_OSI ("Darwin")) { Return (Zero) } Else { } } } } But I get the same error. 
       
      I'm at a complete loss, can anyone help?
       
       
      config.plist
      ACPI.zip
    • By tonyx86
      *** I have started another thread for installing Catalina on the Dell Latitude E6410.  If you were thinking of installing Mojave, but would prefer to skip right to Catalina, click here. ***
       
      *** I am no longer maintaining the installation files in this first post.  Refer to my Catalina thread for the latest guidelines / files for installing macOS on this Latitude E6410 with Nvidia graphics ***
       
      I was inspired by @duduclx post here for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5 and subsequently 10.14.6.  Everything works perfectly (including sleep).  I'm starting this thread hoping to help others install Mojave on their E6410s.  A brief installation guide is provided later in this first post.  The interested reader is encouraged to read the other posts in this thread to see how this solution evolved and to learn additional tips/details not provided in this first post (including dual-booting with macOS and Windows).
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 6 developed by @Dr. Hurt and compiled by @bronxteck), not the original version), USBInjectAll (with custom SSDT-UIAC), VoodooSDHC.kext (configured as shown here). Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      Addition of _OFF and _ON methods to _PTS and _WAK methods respectively (to control discrete graphics in order to enable sleep/wake) LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)  
      What IS working:
      SLEEP IS WORKING! Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera SD Card Reader  
      Known issues and their solutions (These issues have all been resolved, with the solutions incorporated into the attached config files.  The issues are listed here for historical purposes and no further work is needed unless stated otherwise).
      (Solution to this issue is to remove Device (PNLF) from the DSDT): Some users experience display issues.  Solution is to remove Device (PNLF) from the DSDT.  The attached DSDT currently still includes Device (PNLF), so you will need to edit the DSDT to remove PNLF. USB sleep/wake power IORegistry keys are no longer provided in IOUSBHostFamily.kext after High Sierra 10.13.6.  Solution is to added SSDT-USBX.aml to EFI/CLOVER/ACPI/patched.  The attached SSDT-USBX.aml includes USB sleep/wake properties for MacBookPro6,2 from High Sierra 10.13.6 IOUSBHostFamily.kext. Laptop does not sleep on lid close.  Solution is to add Notify (LID0) code to Method (BTNV) in the DSDT.  This is solved in the attached DSDT. Leaving this for historical purposes, but the CLOVER USBFix is no longer necessary after finding that I had incorrectly applied the DSDT _DSM patch for Device (EHC1).  The CLOVER USBFix is not needed after fixing the DSDT..  AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  Thank you, @feartech, for this tip. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European. This configuration (captured in the attached config files) uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The assigned value of ACOS and OSYS in the DSDT are conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc).  The attached config hard-codes ACOS and OSYS values equivalent to those for Linux.  Another way to handle this (different from the method employed in the attached config files) might be to override _OSI with XOSI (defined in a custom SSDT). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  This should be an internal USB port (portType=2).  I learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits.  I am now running with these changes, but haven't found these changes to make any difference in operational behavior.
      Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to SLPB Sleep / Wake does not work with the basic DSDT edits.  I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF and _ON methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/. The Clover boot arg should be changed to "darkwake=0" for reasons explained by @holyfield in this thread.  Leaving this for historical purposes: LCD screen is blank when waking laptop by opening lid (screen is not blank when waking with power button).  Solution is to add darkwake=8 to CLOVER boot args.  Thank you @Hervé for this tip.  
      Brief Installation Guide:
      Configure BIOS (version A17) as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC: Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace: Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN;  Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext.  Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original), VoodooSDHC.kext (configured as shown here). Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z After applying Mojave updates, HWMonitor may not display discrete graphics attributes.  On systems with multiple displays, a second (or third display) may not be active after applying the Mojave update.  The solution to this is to run "sudo kextcache -i /" (in a terminal window) and reboot.  This will usually fix the issue.  If the issue is not fixed, run DosDude's Post Install Utility, apply the Legacy Graphics Patch, reboot and then run "sudo kextcache -i /" if necessary.  
      Screenshots
       
       
      Credits
      In addition to those mentioned in this first post and in subsequent posts in this thread, much of this solution for the Latitude E6410 was made possible by the numerous contributions of @RehabMan.  I hope he's doing well, wherever he is.  Hopefully he has long since forgotten what a PIA I was (and still am) as I was (and still am) learning hackOS.  
       
      E6410-Mojave-v4.zip
    • By jlrycm
      Finally I was able to move from Clover to OpenCore 0.5.9 on my hackintosh build. It boots really fast and even with the famous boot chime. I attached the OC config.plist for anyone who wants to give it a try. I followed the Github step-by-step guide:
      Haswell · GitBook
        dortania.github.io My build specs are:
      Gigabyte Z97-HD3 rev. 2.1, i5-4690K, 16 GB RAM, Gigabyte Aorus AMD RX 580 8gb GPU.
      I used OpenCanopy to give a Clover feeling to the OpenCore boot menu (I don’t like list-type boot menus). 
      config.plist
    • By ludufre
      Installing macOS Big Sur 11.0 DP1 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      06/28/2020 22:05h GMT-0
      - Replaced detach command when creating ISO.
      - Thanks @ham4ever 
      - Added instruction to run one line at time.
       
      06/27/2020 02:37h GMT-0
      - iMessage works too. Just not at first boot.
       
      06/26/2020 18:54h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i7-8700K ->  Work. All SpeedStep stages.
      - Video Card: Intel UHD 630 ->  Work. QE/CI and Metal.
      - Chipset: Intel Z370 ->  Work.
      - HDMI 2.0 (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Work.
      - Audio: ALC1220 ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Not work. Replaced with BCM94360CS2.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Todo
       
      - Fix iMessage (other iServices works perfectly)
      - Nothing
       
       
      Disclaimer! 
       
      Bootloaders are currently unable to start the installation.
      The solution is to use a virtual machine and use a physical disk (additional, USB or SATA, NVME) as a target in the installation.
      Change the OpenCore compiled from the source code, and add some entries in NVRAM through config.plist.
       
      This is not the best solution. But it is the only way at the moment. There are some ready-made images available out there, but I prefer not to use them and create a clean installation.
       
       
      What you need to install
       
      - Running install of macOS
      - Already working OpenCore with this setup
      - Create bootable ISO file
      - Spare Disk/SSD
      - macOS Big Sur DP1 install app
      - Latest OpenCore + Kexts compiled from sources
      - Some KEXTs and SSDT patches
       
       
       
      UEFI configuration
       
      My BIOS is F10 (I use an 8th generation processor, so I don't need to upgrade)
       
      You can configure manually or load my BIOS profile.
       
      Manually:
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: BIOS - CSM Support to Disabled
      - Change value: BIOS - Secure Boot to Disabled
      - Change value: Peripherals - Initial Display to IGP
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Save & Exit Setup
       
      or, BIOS profile
      You can use one of my BIOS profiles attached bellow.
      It's two versions. One stock and another with overclock [5.0 GHz]
      - Put the profile in the root of the flash drive at EFI partition.
      - Restart with DEL pressed to enter BIOS setup.
      - Go to Save & Exit.
      - Select Load Profiles.
      - Select last option and then the flasdrive in the list.
      - And finally choose MACOS_STOCK or MACOS_5GHZ.
      - Save & Exit Setup



      How create bootable ISO file
       
      Download Big Sur DP1
       
      Run this command on Temrinal:
      sudo /System/Library/PrivateFrameworks/Seeding.framework/Resources/seedutil enroll DeveloperSeed Go to System Updater and download the Install macOS Beta app.
       
      Create ISO
       
      Then run on Terminal (One line at a time):
      hdiutil create -size 12G -fs hfs+ -volname install -type SPARSEBUNDLE ~/Desktop/install hdiutil attach ~/Desktop/install.sparsebundle sudo /Applications/Install\ macOS\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/install --nointeraction hdiutil detach `diskutil list |grep 'Install macOS Beta' |awk '{print $8}'` -force hdiutil makehybrid -o ~/Desktop/install ~/Desktop/install.sparsebundle rm -rf ~/Desktop/install.sparsebundle
       
      Now you have install.iso on desktop.
       
       
      How create create the virtual machine and install to disk/SSD
       
      Download and install the trial version of the VMware Fusion from their site. I'm used the version 11.5.5.
       
      - Create a custom virtual machine
       

       
      - Operating System: Apple OS X - macOS 10.15
       

       
      - Create a new virtual disk (The size doesn't matter, We'll delete later)
       

       
      - Click in "Customize Settings"
       

       
      - Save the VM on desktop with name: bigsur
       

       
       
      - Insert the spare disk/SSD on PC (reboot if necessary) and identify what /dev/diskX is.
      You can look on Disk Utility.app:

       
      - Create VMDK that point to it:
      sudo diskutil unmountDisk diskX /Applications/VMware\ Fusion.app/Contents/Library/vmware-rawdiskCreator create /dev/diskX fullDevice ~/Desktop/bigsur.vmwarevm/physical sata - Edit the virtual machine settings created previously
       

       
      - Click in Hard Disk (SATA) and delete it (Remove Hard Disk)
       

       
      - Then add the physical disk
       

       
      - There's a bug in Fusion. To select the physical.vmdk, right click then "Quick Look", then "Share virtual disk with the virtual machine that created it"
       

       
      - Click Apply.
       

       
      - Now mount de install.iso
       


       
      - Start the VM and install as usual until: Disk Utility, format GUID with APFS (VMware Virtual SATA Hard Drive Media), Install macOS, wait few reboots and stop at first boot wizard.
       
      This can take up to 45 minutes. It may seem like it is stopped, but it is not.
       

       
      - Press Command + Q and shutdown (usually WIN + Q)
       

       
      - Close VMware Fusion.
       
       
      Copy OpenCore to EFI
       
      - Mount the EFI with:
      sudo diskutil mount diskXs1  
      - Copy your current working OpenCore EFI to that mounted EFI.
       
      - Download mine attached or Update your OpenCore, Kexts and driver UEFI.
              - You can use the @MaLd0n script attached to compile all (OlarilaOC.command.zip)
              - If using mine add your MLB, ROM, SystemUUID and SystemSerialNumber. (see how to)
       
      - Add following items do config.plist:
       
      NVRAM -> Add -> 7C436110-AB2A-4BBB-A880-FE41995C9F82 -> boot-args -> -lilubetaall (append)
      NVRAM -> Add -> 7C436110-AB2A-4BBB-A880-FE41995C9F82 -> booter-fileset-basesystem + Data + <00>
      NVRAM -> Add -> 7C436110-AB2A-4BBB-A880-FE41995C9F82 -> booter-fileset-kernel + Data + <00>
      NVRAM -> Delete -> 7C436110-AB2A-4BBB-A880-FE41995C9F82 -> booter-fileset-basesystem
      NVRAM -> Delete -> 7C436110-AB2A-4BBB-A880-FE41995C9F82 -> booter-fileset-kernel
       

       
      Done!
       
      Boot from the new disk/SSD and finish de first boot wizard.
       
       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas, @khamsakamal48, @MaLd0n, @joedm and @vit9696 and all others members involved directly or indirectly.
       
      Attachments
       
      MACOS_5GHZ
      MACOS_STOCK
      OlarilaOC.command.zip
      EFI.zip
       
       
×