Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / 400 SkyLake / KabyLake / CoffeeLake / CometLake DSDT

5,429 posts in this topic

Recommended Posts

Just now, bluenote56 said:

I must do something wrong. I strictly followed your instructions, installing Clover as you said (picture)in esp . I always get a boot0 error and I'm forced to boot from usb. I don't know why. Actually I can say that everything works but bluetooth and wifi (of course) and that I can't adjust brightness though I installed Native display. Buttons work (shift F1 and F2) but nothing changes but this thing it's a p.i.t.a. I would like to boot from laptop. Thanks for your help as usual. 

Use a fresh install and after use boot0ss ESP or uefi

Share this post


Link to post
Share on other sites
Advertisement
52 minutes ago, Pluskat5000Schiffe said:

Results after replacement with your files

https://we.tl/7LYJZvOz9R Thanks for your help!

looks good, just add more two patches in config.plist

 

EC0 to EC
4543 305f
4543 5f5f

 

GLAN to GIGE
474c 414e
4749 4745

9 minutes ago, 41089 said:

Hey MaLd0n,  I've slightly upgraded my build would it be possible to get a new DSDT? 

41089 imac march.zip

without many things, but looks good

Share this post


Link to post
Share on other sites
28 minutes ago, MaLd0n said:

looks good, just add more two patches in config.plist

 

EC0 to EC
4543 305f
4543 5f5f

 

GLAN to GIGE
474c 414e
4749 4745

without many things, but looks good

Thanks Mald0n!

Can you tell me briefly what has been optimised compared to the situation before your additions?

Also, I still have a problem with the wake from sleep. When it wakes from sleep the hack is alive but the Dell P2715Q 4K screen fails to display anything and enters soon to power safe mode. I have to reboot the hack again in this situation. I read a lot of this issue and I disabled sleep but I really interested in a sleep / awake fix if there is any. It has to do with the DisplayPort 1.2 if I remember correctly. Can you possible fix this? Does the HD630 of the 8700K maybe help when its added to the hack? At this moment its disabled and runs it on discrete graphics only.

 

Share this post


Link to post
Share on other sites
9 minutes ago, Pluskat5000Schiffe said:

Thanks Mald0n!

Can you tell me briefly what has been optimised compared to the situation before your additions?

Also, I still have a problem with the wake from sleep. When it wakes from sleep the hack is alive but the Dell P2715Q 4K screen fails to display anything and enters soon to power safe mode. I have to reboot the hack again in this situation. I read a lot of this issue and I disabled sleep but I really interested in a sleep / awake fix if there is any. It has to do with the DisplayPort 1.2 if I remember correctly. Can you possible fix this? Does the HD630 of the 8700K maybe help when its added to the hack? At this moment its disabled and runs it on discrete graphics only.

 

i see others users with same problem with 4k

u can se both gpus for hardware acceleration

-IntelGFX 0x59128086

-InjectIntel

-ig-platform-id 0x59120003

-IntelGraphics enable in bios

-DVMT to 128

-IntelGraphicsFixup.kext

MaLd0n 2018-03-19 às 14.04.35.png

MaLd0n 2018-03-19 às 14.07.08.png

Share this post


Link to post
Share on other sites
7 hours ago, MaLd0n said:

i see others users with same problem with 4k

u can se both gpus for hardware acceleration

...

Intel UHD Graphics appears visible under Hardware\PCI

However VDADecoderChecker gives an error:

GVA info: Successfully connected to the Intel plugin, offline Gen95 
An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process.
VDADecoderCreate failed. err: -12473

I tried a Bootarch "shikigva=12" but no difference and causes iTunes to crash, "shikigva=4" no difference and iTunes stable.

Thanks!

P.S. the wake from sleep is solved... you never believe it... I had always used the equipped Dell cable. This was a Displayport to Mini DisplayPort Cable. I swapped it for a DisplayPort to Displayport Cable and wake from sleep is working... This is so terrible stupid but I'm so glad I found the issue!

Celebrated to soon ... Sometimes it still doesn't wake it looks cable related because with original I can't wake at all. The older cable does... sometimes...

 

Edited by Pluskat5000Schiffe

Share this post


Link to post
Share on other sites
1 hour ago, Pluskat5000Schiffe said:

Intel UHD Graphics appears visible under Hardware\PCI

However VDADecoderChecker gives an error:

GVA info: Successfully connected to the Intel plugin, offline Gen95 
An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process.
VDADecoderCreate failed. err: -12473

I tried a Bootarch "shikigva=12" but no difference and causes iTunes to crash, "shikigva=4" no difference and iTunes stable.

Thanks!

P.S. the wake from sleep is solved... you never believe it... I had always used the equipped Dell cable. This was a Displayport to Mini DisplayPort Cable. I swapped it for a DisplayPort to Displayport Cable and wake from sleep is working... This is so terrible stupid but I'm so glad I found the issue!

Celebrated to soon ... Sometimes it still doesn't wake it looks cable related because with original I can't wake at all. The older cable does... sometimes...

 

work for me

 

-IntelGFX 0x59128086
-InjectIntel
-ig-platform-id 0x59120003
-IntelGraphics enable in bios
-DVMT 128
-IntelGraphicsFixup.kext
-Shiki.kext

 

dont need flag shikigva with last Shiki version

 

MaLd0n 2018-03-19 às 21.49.33.png

MaLd0n 2018-03-19 às 21.49.56.png

MaLd0n 2018-03-19 às 21.50.08.png

Share this post


Link to post
Share on other sites
29 minutes ago, MaLd0n said:

 

 

MaLd0n 2018-03-19 às 21.49.56.png

 

It looks different. @my IGPU@2 I have 2 times AppleGraphicsDeviceControlClient. Is that related with the amount ports? 

Thanks! How can I verify if Encode / Decode works ok with UHD630?

Screen Shot 2018-03-20 at 02.20.29.png

Share this post


Link to post
Share on other sites
1 minute ago, Pluskat5000Schiffe said:

It looks different. @my IGPU@2 I have 2 times AppleGraphicsDeviceControlClient. Is that related with the amount ports? 

Thanks! How can I verify if Encode / Decode works ok with UHD630?

Screen Shot 2018-03-20 at 02.20.29.png

check with MacX Video Converter Pro.app

MaLd0n 2018-03-19 às 22.28.02.png

Share this post


Link to post
Share on other sites
37 minutes ago, MaLd0n said:

check with MacX Video Converter Pro.app

MaLd0n 2018-03-19 às 22.28.02.png

I see nVidia GT1080Ti only there so its not working correctly.

Can you please look into my clover files if I mistyped or forgot something?

https://we.tl/YQ2srimo5h

Cheers!

 

Share this post


Link to post
Share on other sites
56 minutes ago, Pluskat5000Schiffe said:

I see nVidia GT1080Ti only there so its not working correctly.

Can you please look into my clover files if I mistyped or forgot something?

https://we.tl/YQ2srimo5h

Cheers!

 

i think is a bios config or smbios, i use iMacPro and beta 10.13.4

u need a tests

Share this post


Link to post
Share on other sites

Hey there!

Could you pls take a look on my results, is there something else to do to improve?

H/W: Asrock H110M-HDS, G4560, GTX650, 8GB, SSD Sata, TV connected by HDMI (with sound) 

Running 10.12.6, seems good

I have tried all guides High Sierra that i could find on network in 2 weak but useless. got random half-second freezes all time.

Share this post


Link to post
Share on other sites
6 hours ago, MaLd0n said:

i think is a bios config or smbios, i use iMacPro and beta 10.13.4

u need a tests

MalD0n, Do you only have integrated graphics installed or do you also have a nVidia discrete in your system? 

In the acX Video Converter Pro.app I see behind graphics: nVidia GTX1080Ti and I do see hardware encoding supported: yes. Does this mean that video encoding is done with the nVidia card or does it mean the intel is doing the job? (In older version you could explicit turn off encoding platforms to enforce another platform to be used if I'm correct).

Cheers

 

Share this post


Link to post
Share on other sites
9 hours ago, iSoul01 said:

Hey there!

Could you pls take a look on my results, is there something else to do to improve?

H/W: Asrock H110M-HDS, G4560, GTX650, 8GB, SSD Sata, TV connected by HDMI (with sound) 

Running 10.12.6, seems good

I have tried all guides High Sierra that i could find on network in 2 weak but useless. got random half-second freezes all time.

CLOVER.zip

3 hours ago, Pluskat5000Schiffe said:

MalD0n, Do you only have integrated graphics installed or do you also have a nVidia discrete in your system? 

In the acX Video Converter Pro.app I see behind graphics: nVidia GTX1080Ti and I do see hardware encoding supported: yes. Does this mean that video encoding is done with the nVidia card or does it mean the intel is doing the job? (In older version you could explicit turn off encoding platforms to enforce another platform to be used if I'm correct).

Cheers

 

RX 580 now, nvidia provide a bad driver, i changed ;)

 

Share this post


Link to post
Share on other sites

Hy @MaLd0n, can you please help me with DSDT? I have attached my Send me zip The GA-Z170X-UD3 motherboard has the latest firmware, F23g released on 2018/03/09 with the new Intel patches. 

 

Edited by bogdanw

Share this post


Link to post
Share on other sites
1 hour ago, bogdanw said:

Hy @MaLd0n, can you please help me with DSDT? I have attached my Send me zip The GA-Z170X-UD3 motherboard has the latest firmware, F23g released on 2018/03/09 with the new Intel patches. 

Send me iMac-Bogdan.zip

DSDT.aml.zip

use 

GFX0 to IGPU
47465830 
49475055 

HDAS to HDEF
48444153 
48444546 

HECI to IMEI
48454349 
494d4549 

SAT0 to SATA
53415430 
53415441 

3 minutes ago, Pluskat5000Schiffe said:

Which model exactly? Will this do? to replace my 1080ti?

I'm using RX580 

https://www.powercolor.com/product?id=1493084304

Share this post


Link to post
Share on other sites
5 minutes ago, ygtaldmr said:

I keep getting the error "There was a problem processing the uploaded file. -200" when I try to upload. So I uploaded to dropbox.

Thank you

Link for dump: https://www.dropbox.com/s/c4lnf21na9gmbzt/iMac.zip?dl=0

extract untouched tables with f4 key in clover boot screen

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9400K, 9600K, 9700K, 9900K, 9900KS (All KF Models work but use SMBios iMacPro1,1 instead)
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, RX 5500, 5500 XT, 5600, 5600 XT, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM94360CS2 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      CLOVER & OPENCORE EFIs 
      Current EFIs Updated 04/05/2020
       
       
      Clover EFI Update v5115 - 04/05/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
       
      Clover Z390 Master Navi Vega EFI 040520.zip - Vega, Navi (5700, 5700XT etc), Radeon VII DSDT EFI
      Clover Z390 Master Polaris EFI 040520.zip - RX500 Polaris Series (RX590, 580, 570 etc) DSDT EFI
       
      Please Note - I have now set KernelPM to No as standard so if you don’t have a unlocked MSR or not using my MSR Unlocked Bios Profile then go into the Clover Config.plist and set KernelPM to Yes or you won’t be able to boot up. An even better fix would be to unlock your MSR using my profile method.
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
       
       
      OpenCore EFI Update v0.5.8 - 04/05/2020
      Myself and @texem have now created a OpenCore EFI done the way the OpenCore Devs intended it to be made, There is no DSDT in use so you can use this EFI on any supported GPU and the SSDTs have been made so they will not be used in any other Operating System apart from MacOS.
       
      OpenCore 058 Z390 Master 19,1 040520.zip - OpenCore v0.5.8, SMBios iMac19,1
      OpenCore 058 Z390 Master 1,1 040520.zip - OpenCore v0.5.8, SMBios iMacPro1,1 (IGPU Disabled)
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
       
       
      PlistEdit Pro.zip - PlistEdit Pro (use to edit OpenCore)
       
      Using PlistEdit Pro add your details by modifying the following 

       
      PLEASE NOTE - These EFIs are setup to be used with your msr Unlocked so make sure you use the F11c Unlocked Profile but if for any reason you can not unlock MSR then just modify following in the OpenCore config.plist :
      
       
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       

       

       

       

       

       

       

       
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
        Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell   https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Skylake, Kabylake and Coffeelake is here https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
×