Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / 400 SkyLake / KabyLake / CoffeeLake / CometLake DSDT

5,430 posts in this topic

Recommended Posts

hi @MaLd0n

another problam shutdown/restart not worke 

attache my screenshot

my spec

i5 8400 -(uhd 630)

h370 hd3-(gigabyte latest bios)

8gb 2400,

rx 580 4gb,

macOS Mojave 14.2 (18C54)

system definition= imac 18.3

any solution?

i used your post instalation clover.

20190205_182557.jpg

Share this post


Link to post
Share on other sites
Advertisement
On 2/5/2019 at 11:25 AM, corbiz said:

hi @MaLd0n

another problam shutdown/restart not worke 

attache my screenshot

my spec

i5 8400 -(uhd 630)

h370 hd3-(gigabyte latest bios)

8gb 2400,

rx 580 4gb,

macOS Mojave 14.2 (18C54)

system definition= imac 18.3

any solution?

i used your post instalation clover.

 

use fakesmc instead virtualsmc

Share this post


Link to post
Share on other sites
On 2/5/2019 at 12:26 PM, JimInside said:

@maLd0n is there any other way of fixing this ? should i try USB2 stick? thank you

yes, try with USB 2 stick in usb 3 PORT

Share this post


Link to post
Share on other sites
On 2/2/2019 at 9:57 PM, MaLd0n said:

what happens with sleep?

some intelHD sleep don't work

 

Hi MaLd0n !

Sorry cause I replay so late..I was very busy at work. 

Tank you again for my DSDT file!

I made a change with my graphics card, I bought a new Saphire RX580 Nitro.

Also sleep its working, but after 5 seconds it wakeup automatically!

after wekup, i notest also screen remain black until I press keyboard or mouse,after pressing mouse login screen apear.

Z390 Aorus Ultra DSDT MaLd0n.zip

Share this post


Link to post
Share on other sites

Hi Mald0n thanks for your help

I installed Mojave successfully

I have many graphics glitches though 

also no audio etc

I sent you the RunMe app output 

Could you help building EFI folder and DSDT for my CPU?

Thanks in advance

ps. I will also donate a small amount for your help

Thanks man!

Archive.zip

Share this post


Link to post
Share on other sites
On 2/7/2019 at 2:58 PM, sygey said:

 

Hi MaLd0n !

Sorry cause I replay so late..I was very busy at work. 

Tank you again for my DSDT file!

I made a change with my graphics card, I bought a new Saphire RX580 Nitro.

Also sleep its working, but after 5 seconds it wakeup automatically!

after wekup, i notest also screen remain black until I press keyboard or mouse,after pressing mouse login screen apear.

Z390 Aorus Ultra DSDT MaLd0n.zip

use power button for wake

DSDT.aml.zip

On 2/7/2019 at 3:56 PM, JimInside said:

Hi Mald0n thanks for your help

I installed Mojave successfully

I have many graphics glitches though 

also no audio etc

I sent you the RunMe app output 

Could you help building EFI folder and DSDT for my CPU?

Thanks in advance

ps. I will also donate a small amount for your help

Thanks man!

Archive.zip

DSDT.aml.zip

Share this post


Link to post
Share on other sites

Hey mald0n thanks for your effort but when I tried your DSDT with Clover I saw on logs many ACPI errors and couldn't boot with it successfully.

I sent you my new EFI folder to check it out (your DSDT + removed some kexts that were not used)

Thanks again 

CLOVER.zip

Share this post


Link to post
Share on other sites
7 hours ago, JimInside said:

Hey mald0n thanks for your effort but when I tried your DSDT with Clover I saw on logs many ACPI errors and couldn't boot with it successfully.

I sent you my new EFI folder to check it out (your DSDT + removed some kexts that were not used)

Thanks again 

CLOVER.zip

u need post a new send_me with DSDT load

Share this post


Link to post
Share on other sites
On 2/10/2019 at 5:23 PM, MaLd0n said:

u need post a new send_me with DSDT load

 

When I use the DSDT I get prohibited sign again - can't boot.

I have to use SMBIOS iMac14,2 for graphics acceleration to work and boot successfully

EDIT:Could you help me @MaLd0n ? Thank you

Edited by JimInside

Share this post


Link to post
Share on other sites

Hi MaLd0n!

Got my hands on a new Z390, here's a sendme from latest bios, please take a look. I'm trying to make it work on HS and Mojave. Using Nvidia at the moment, but making the iGPU work can be nice. Thanks in advance)

 

Send me Z390s-iMac.zip

Share this post


Link to post
Share on other sites
3 hours ago, XLR said:

Hi MaLd0n!

Got my hands on a new Z390, here's a sendme from latest bios, please take a look. I'm trying to make it work on HS and Mojave. Using Nvidia at the moment, but making the iGPU work can be nice. Thanks in advance)

 

Send me Z390s-iMac.zip

check if work

CLOVER.zip

Share this post


Link to post
Share on other sites
2 hours ago, MaLd0n said:

check if work

CLOVER.zip

Cool:)

Sleep started working, but upon wake up it gives an errors about usb drives "disk not ejected properly" and doesn't mount some of the usb disks.

 

I'm going to install another M.2 drive for Mojave. Can i use this clover folder for Mojave too?

 

EDIT: Booting when display connected to HD630 gives a KP:

Quote

Anonymous UUID:       737B70C3-6034-7700-F018-399292B04A3F

Tue Feb 12 12:53:55 2019

*** Panic Report ***
panic(cpu 0 caller 0xffffff8000b88f6f): Kernel trap at 0xffffff7f842fc156, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x0000000016864000, CR4: 0x00000000003627e0
RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000001
RSP: 0xffffff83896b1e50, RBP: 0xffffff83896b1e80, RSI: 0xffffff804d5bf650, RDI: 0x0000000000000000
R8:  0x0000000000000000, R9:  0x0000000000000003, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000001, R13: 0xffffff800120b800, R14: 0xffffff8348d94000, R15: 0x0000000000000000
RFL: 0x0000000000010002, RIP: 0xffffff7f842fc156, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 1, VF: 5

Backtrace (CPU 0), Frame : Return Address
0xffffff83896b17e0 : 0xffffff8000a6e1c6
0xffffff83896b1830 : 0xffffff8000b96a74
0xffffff83896b1870 : 0xffffff8000b88d44
0xffffff83896b18e0 : 0xffffff7f840bf01c
0xffffff83896b1980 : 0xffffff8000a201e0
0xffffff83896b19a0 : 0xffffff8000a6dc3c
0xffffff83896b1ad0 : 0xffffff8000a6d9fc
0xffffff83896b1b30 : 0xffffff8000b88f6f
0xffffff83896b1ca0 : 0xffffff7f840bf01c
0xffffff83896b1d40 : 0xffffff8000a201e0
0xffffff83896b1d60 : 0xffffff7f842fc156
0xffffff83896b1e80 : 0xffffff7f842dc9cf
0xffffff83896b1ea0 : 0xffffff800109e0e0
0xffffff83896b1ee0 : 0xffffff7f812b2a8e
0xffffff83896b1f30 : 0xffffff7f8344f8d6
0xffffff83896b1f50 : 0xffffff7f834587a9
0xffffff83896b1f70 : 0xffffff8000b88551
0xffffff83896b1fd0 : 0xffffff8000a20396
0xffffffa3c0d83f30 : 0xffffff8000a8c4a2
0xffffffa3c0d83f80 : 0xffffff8000a8ca70
0xffffffa3c0d83fa0 : 0xffffff8000a1f557
      Kernel Extensions in backtrace:
         com.apple.iokit.IOPCIFamily(2.9)[D91E9813-9717-31B8-BFE5-2F3A00F375F3]@0xffffff7f81294000->0xffffff7f812c8fff
         com.apple.driver.AppleACPIPlatform(6.1)[B0282791-F78C-3A3D-A829-629AD847C7EA]@0xffffff7f83448000->0xffffff7f834e3fff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[95DA39BB-7C39-3742-A2E5-86C555E21D67]@0xffffff7f81d30000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[D91E9813-9717-31B8-BFE5-2F3A00F375F3]@0xffffff7f81294000
            dependency: com.apple.driver.AppleSMC(3.1.9)[0249444C-80D4-3184-9060-F70DA3BEB17D]@0xffffff7f81d39000
         as.vit9696.VirtualSMC(1.0.2)[9FD97551-AF11-37AD-8BBA-C9A0D7691473]@0xffffff7f840b0000->0xffffff7f840cffff
            dependency: as.vit9696.Lilu(1.3.4)[04022A5D-CB3E-3069-9DC7-AB4873462C07]@0xffffff7f84037000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[95DA39BB-7C39-3742-A2E5-86C555E21D67]@0xffffff7f81d30000
         com.apple.driver.AppleIntelKBLGraphicsFramebuffer(10.3.6)[12BEE71C-6D14-3704-8262-B4C04C8AB17B]@0xffffff7f842af000->0xffffff7f8448ffff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[D91E9813-9717-31B8-BFE5-2F3A00F375F3]@0xffffff7f81294000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[95DA39BB-7C39-3742-A2E5-86C555E21D67]@0xffffff7f81d30000
            dependency: com.apple.iokit.IOAcceleratorFamily2(378.26)[AE312652-F3AF-3BFD-AEFF-FE4CCCC33BA9]@0xffffff7f819bc000
            dependency: com.apple.iokit.IOReportFamily(31)[D2F2FBDF-4EE4-38BA-99F5-B699F886F413]@0xffffff7f82221000
            dependency: com.apple.AppleGraphicsDeviceControl(3.20.14)[D3CF5F89-2DA6-3F73-995D-F5DDE191E192]@0xffffff7f815e2000
            dependency: com.apple.iokit.IOGraphicsFamily(519.21)[E5B53C5D-BF6E-3D72-9091-A80DFE5426C9]@0xffffff7f8157c000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 debug=0x100 -v shikigva=60

Mac OS version:
17G5019

Kernel version:
Darwin Kernel Version 17.7.0: Thu Dec 20 21:47:19 PST 2018; root:xnu-4570.71.22~1/RELEASE_X86_64
Kernel UUID: 4A5298BF-709E-37DF-B7F0-4298065CC266
Kernel slide:     0x0000000000800000
Kernel text base: 0xffffff8000a00000
__HIB  text base: 0xffffff8000900000
System model name: iMac18,3 (Mac-BE088AF8C5EB4FA2)

System uptime in nanoseconds: 12972193186
last loaded kext at 12503942027: com.apple.driver.AppleIntelKBLGraphics    10.3.6 (addr 0xffffff7f84490000, size 1228800)
loaded kexts:
ru.joedm.SMCSuperIO    1.0.2
com.insanelymac.IntelMausiEthernet    2.4.1d1
as.lvs1974.RTCMemoryFixup    1.0.3
as.vit9696.SMCProcessor    1.0.2
org.vulgo.NoVPAJpeg    1.2.8
as.lvs1974.AirportBrcmFixup    1.1.9
as.vit9696.AppleALC    1.3.6
as.vit9696.WhateverGreen    1.2.7
com.rehabman.driver.USBInjectAll    0.7.1
ru.usrsse2.SMCLightSensor    1
as.vit9696.VirtualSMC    1.0.2
as.vit9696.Lilu    1.3.4
com.apple.driver.AppleIntelKBLGraphics    10.3.6
com.apple.driver.ApplePlatformEnabler    2.7.0d0
com.apple.driver.AGPM    110.23.37
com.apple.driver.X86PlatformShim    1.0.0
com.apple.driver.AppleIntelKBLGraphicsFramebuffer    10.3.6
com.apple.driver.AppleMikeyHIDDriver    131
com.apple.driver.AppleMikeyDriver    281.52
com.apple.driver.AppleHDAHardwareConfigDriver    281.52
com.apple.driver.AppleHDA    281.52
com.apple.driver.AppleUpstreamUserClient    3.6.5
com.apple.driver.AppleMCCSControl    1.5.5
com.apple.GeForce    10.3.2
com.apple.driver.AppleGraphicsDevicePolicy    3.20.14
com.apple.AGDCPluginDisplayMetrics    3.20.0
com.apple.driver.AppleHV    1
com.apple.iokit.IOUserEthernet    1.0.1
com.apple.iokit.IOBluetoothSerialManager    6.0.7f12
com.apple.driver.pmtelemetry    1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleIntelPCHPMC    2.0.1
com.apple.driver.AppleFIVRDriver    4.1.0
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleSMCLMU    211
com.apple.driver.AppleIntelSlowAdaptiveClocking    4.0.0
com.apple.nvidia.NVDAStartup    10.3.2
com.apple.driver.AppleOSXWatchdog    1
com.apple.iokit.IOBluetoothUSBDFU    6.0.7f12
com.apple.iokit.SCSITaskUserClient    404.30.2
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.filesystems.apfs    748.51.0
com.apple.filesystems.hfs.kext    407.50.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.BootCache    40
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0
com.apple.AppleSystemPolicy    1.0
com.apple.driver.AirPort.BrcmNIC    1241.31.1a9
com.apple.driver.AppleAHCIPort    329.50.2
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIButtons    6.1
com.apple.driver.AppleBacklight    170.12.6
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleAPIC    1.7
com.apple.nke.applicationfirewall    183
com.apple.security.TMSafetyNet    8
com.apple.security.quarantine    3
com.apple.driver.DspFuncLib    281.52
com.apple.kext.OSvKernDSPLib    526
com.apple.iokit.IOAcceleratorFamily2    378.26
com.apple.nvidia.driver.NVDAGK100Hal    10.3.2
com.apple.nvidia.driver.NVDAResman    10.3.2
com.apple.driver.AppleGraphicsControl    3.20.14
com.apple.iokit.IOAVBFamily    683.1
com.apple.plugin.IOgPTPPlugin    680.15
com.apple.iokit.IOEthernetAVBController    1.1.0
com.apple.driver.AppleSSE    1.0
com.apple.iokit.IOSurface    211.15
com.apple.iokit.IOSerialFamily    11
com.apple.driver.AppleSMBusController    1.0.18d1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.driver.AppleHDAController    281.52
com.apple.iokit.IOHDAFamily    281.52
com.apple.iokit.IOAudioFamily    206.5
com.apple.vecLib.kext    1.2.0
com.apple.driver.AppleSMBusPCI    1.0.14d1
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.AppleGPUWrangler    3.20.0
com.apple.AppleGraphicsDeviceControl    3.20.14
com.apple.iokit.IOSlowAdaptiveClockingFamily    1.0.0
com.apple.driver.X86PlatformPlugin    1.0.0
com.apple.driver.IOPlatformPluginFamily    6.0.0d8
com.apple.driver.usb.IOUSBHostHIDDevice    1.2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    6.0.7f12
com.apple.iokit.IOBluetoothHostControllerUSBTransport    6.0.7f12
com.apple.iokit.IOBluetoothHostControllerTransport    6.0.7f12
com.apple.iokit.IOBluetoothFamily    6.0.7f12
com.apple.driver.AppleUSBHostMergeProperties    1.2
com.apple.driver.usb.AppleUSBHub    1.2
com.apple.iokit.IOAHCIBlockStorage    301.40.2
com.apple.driver.usb.cdc    5.0.0
com.apple.driver.usb.networking    5.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice    1.2
com.apple.driver.AppleThunderboltNHI    4.7.3
com.apple.iokit.IOThunderboltFamily    6.7.9
com.apple.driver.AppleXsanScheme    3
com.apple.filesystems.hfs.encodings.kext    1
com.apple.iokit.IO80211Family    1200.12.2
com.apple.driver.mDNSOffloadUserClient    1.0.1b8
com.apple.driver.corecapture    1.0.4
com.apple.iokit.IONVMeFamily    2.1.0
com.apple.iokit.IOAHCIFamily    288
com.apple.driver.usb.AppleUSBXHCIPCI    1.2
com.apple.driver.usb.AppleUSBXHCI    1.2
com.apple.driver.usb.AppleUSBHostPacketFilter    1.0
com.apple.iokit.IOUSBFamily    900.4.1
com.apple.driver.AppleEFINVRAM    2.1
com.apple.driver.AppleEFIRuntime    2.1
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.driver.AppleBacklightExpert    1.1.0
com.apple.iokit.IONDRVSupport    519.21
com.apple.iokit.IOGraphicsFamily    519.21
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    480.60.2
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleEffaceableStorage    1.0
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleUSBTDM    439.70.3
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.iokit.IOUSBMassStorageDriver    140.70.2
com.apple.iokit.IOSCSIBlockCommandsDevice    404.30.2
com.apple.iokit.IOSCSIArchitectureModelFamily    404.30.2
com.apple.iokit.IOStorageFamily    2.1
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.KernelRelayHost    1
com.apple.iokit.IOUSBHostFamily    1.2
com.apple.driver.usb.AppleUSBCommon    1.0
com.apple.driver.AppleBusPowerController    1.0
com.apple.driver.AppleSEPManager    1.0.1
com.apple.driver.IOSlaveProcessor    1
com.apple.iokit.IOReportFamily    31
com.apple.iokit.IOTimeSyncFamily    680.15
com.apple.iokit.IONetworkingFamily    3.4
com.apple.driver.AppleACPIPlatform    6.1
com.apple.driver.AppleSMC    3.1.9
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.pthread    1
com.apple.kec.Libm    1
com.apple.kec.corecrypto    1.0

 

 

Thanks!

Edited by XLR

Share this post


Link to post
Share on other sites
3 hours ago, XLR said:

Cool:)

Sleep started working, but upon wake up it gives an errors about usb drives "disk not ejected properly" and doesn't mount some of the usb disks.

 

I'm going to install another M.2 drive for Mojave. Can i use this clover folder for Mojave too?

 

EDIT: Booting when display connected to HD630 gives a KP:

 

Thanks!

use fakesmc instead virtual smc

 

up dvmt in bios/uefi config

 

the best is high sierra, for use nvidia, intelhd is bad :D

Share this post


Link to post
Share on other sites
10 hours ago, MaLd0n said:

up dvmt in bios/uefi config

 

the best is high sierra, for use nvidia, intelhd is bad :D

I'm using DVMT Pre-Allocated - 64M, and DVMT Total Gfx Mem - MAX.

Do you recommend changing the "Pre-Allocated" to specific value, or just playing with higher values until i find the right one?

Share this post


Link to post
Share on other sites

hey,

could you at least help me with getting audio working?

edit: Passing the boot argument alcid=1 worked for this although the sound drops on its own randomly

Edited by JimInside

Share this post


Link to post
Share on other sites
3 hours ago, XLR said:

I'm using DVMT Pre-Allocated - 64M, and DVMT Total Gfx Mem - MAX.

Do you recommend changing the "Pre-Allocated" to specific value, or just playing with higher values until i find the right one?

u can create a simple patch with amazing app by @headkaze for it, in my notebook i use it, perfect

 

2 hours ago, JimInside said:

hey,

could you at least help me with getting audio working?

edit: Passing the boot argument alcid=1 worked for this although the sound drops on its own randomly

inject via clover

Share this post


Link to post
Share on other sites

System restarts instead of a shutdown ... have tried everything, but no luck :-(

 

PC specs:
MSI Z170A Gaming M5
Intel Core i7-6700K
2 x 8GB DDR4 Corsair LPX
MSI GTX 1080 Gaming X (But using Intel HD Graphics For High Sierra)
1 x ADATA Ultimate SU650 120GB SSD (High Sierra).
1 x Samsung 970 EVO 256GB NVMe (Windows 10).

Share this post


Link to post
Share on other sites
6 hours ago, ShanerWarner said:

System restarts instead of a shutdown ... have tried everything, but no luck :-(

 

PC specs:
MSI Z170A Gaming M5
Intel Core i7-6700K
2 x 8GB DDR4 Corsair LPX
MSI GTX 1080 Gaming X (But using Intel HD Graphics For High Sierra)
1 x ADATA Ultimate SU650 120GB SSD (High Sierra).
1 x Samsung 970 EVO 256GB NVMe (Windows 10).

Post ur files

--Run_Me
RunMe.app

Share this post


Link to post
Share on other sites

Hi MaLd0n can you help me improve my hackintosh config?

 

Gigabyte Z390 M Gaming

i5-9600K (intel graphics HD630 - I don't have dGPU yet)

2x8Gb G.Skill RipJaws V 3200

Samsung EVO 970 500Go

 

All my USB are working (with the help of Hackintool) and I've create a kext for my CPU (with ssdtprgen beta for unsupported CFL CPU), sound is ok on headphone.

My main problem is framebuffer patch with lilu+whatevergreen, if I add this to my config.plist HDMI audio work, HD630 show the right amount of mem but my Mac start video glitch (like crazy). If I remove it from the config.plist video only show 7M but OsX become stable (only small problem I see is when mouse overing safari tabs got a little grey box around the mouse cursor but anywhere else nothing image is stable...). Could you help me? Thanks for your help.

Spoiler

	<key>Properties</key>
		<dict>
			<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
			<dict>
				<key>AAPL,ig-platform-id</key>
				<data>
				BwCbPg==
				</data>
				<key>device-id</key>
				<data>
				mz4AAA==
				</data>
				<key>enable-hdmi20</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-con0-busid</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-con0-enable</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-con0-flags</key>
				<data>
				xwMAAA==
				</data>
				<key>framebuffer-con0-index</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-con0-pipe</key>
				<data>
				CQAAAA==
				</data>
				<key>framebuffer-con0-type</key>
				<data>
				AAQAAA==
				</data>
				<key>framebuffer-con1-busid</key>
				<data>
				AgAAAA==
				</data>
				<key>framebuffer-con1-enable</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-con1-flags</key>
				<data>
				xwMAAA==
				</data>
				<key>framebuffer-con1-index</key>
				<data>
				AgAAAA==
				</data>
				<key>framebuffer-con1-pipe</key>
				<data>
				CAAAAA==
				</data>
				<key>framebuffer-con1-type</key>
				<data>
				AAgAAA==
				</data>
				<key>framebuffer-con2-busid</key>
				<data>
				BAAAAA==
				</data>
				<key>framebuffer-con2-enable</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-con2-flags</key>
				<data>
				xwMAAA==
				</data>
				<key>framebuffer-con2-index</key>
				<data>
				AwAAAA==
				</data>
				<key>framebuffer-con2-pipe</key>
				<data>
				CgAAAA==
				</data>
				<key>framebuffer-con2-type</key>
				<data>
				AAgAAA==
				</data>
				<key>framebuffer-con3-busid</key>
				<data>
				AAAAAA==
				</data>
				<key>framebuffer-con3-enable</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-con3-flags</key>
				<data>
				IAAAAA==
				</data>
				<key>framebuffer-con3-index</key>
				<data>
				/////w==
				</data>
				<key>framebuffer-con3-pipe</key>
				<data>
				AAAAAA==
				</data>
				<key>framebuffer-con3-type</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-fbmem</key>
				<data>
				AAAAAA==
				</data>
				<key>framebuffer-patch-enable</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-stolenmem</key>
				<data>
				AACQAw==
				</data>
				<key>framebuffer-unifiedmem</key>
				<data>
				AAAAYA==
				</data>
			</dict>
		</dict>

 

Send me mac-mini-de-mrbrown.home - 7Mo Version.zip

Send me mac-mini-de-mrbrown.home - Glitch version.zip

Share this post


Link to post
Share on other sites
5 hours ago, MrHackinBrown said:

Hi MaLd0n can you help me improve my hackintosh config?

 

Gigabyte Z390 M Gaming

i5-9600K (intel graphics HD630 - I don't have dGPU yet)

2x8Gb G.Skill RipJaws V 3200

Samsung EVO 970 500Go

 

All my USB are working (with the help of Hackintool) and I've create a kext for my CPU (with ssdtprgen beta for unsupported CFL CPU), sound is ok on headphone.

My main problem is framebuffer patch with lilu+whatevergreen, if I add this to my config.plist HDMI audio work, HD630 show the right amount of mem but my Mac start video glitch (like crazy). If I remove it from the config.plist video only show 7M but OsX become stable (only small problem I see is when mouse overing safari tabs got a little grey box around the mouse cursor but anywhere else nothing image is stable...). Could you help me? Thanks for your help.

  Reveal hidden contents

 

Send me mac-mini-de-mrbrown.home - 7Mo Version.zip

Send me mac-mini-de-mrbrown.home - Glitch version.zip

DSDT.aml.zip

use iMac18,1 smbios

use video patch from here

https://www.insanelymac.com/forum/topic/335018-hackintool-v183/

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9400K, 9600K, 9700K, 9900K, 9900KS (All KF Models work but use SMBios iMacPro1,1 instead)
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, RX 5500, 5500 XT, 5600, 5600 XT, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM94360CS2 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      CLOVER & OPENCORE EFIs 
      Current EFIs Updated 01/06/2020
       
       
      Clover EFI Update v5118 - 01/06/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
       
      Clover Z390 Master Navi Vega EFI 010620.zip - Vega, Navi (5700, 5700XT etc), Radeon VII DSDT EFI
      Clover Z390 Master Polaris EFI 010620.zip - RX500 Polaris Series (RX590, 580, 570 etc) DSDT EFI
       
      Please Note - I have now set KernelPM to No as standard so if you don’t have a unlocked MSR or not using my MSR Unlocked Bios Profile then go into the Clover Config.plist and set KernelPM to Yes or you won’t be able to boot up. An even better fix would be to unlock your MSR using my profile method.
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
       
       
      OpenCore EFI Update v0.5.9 - 01/06/2020
      Myself and @texem have now created a OpenCore EFI done the way the OpenCore Devs intended it to be made, There is no DSDT in use so you can use this EFI on any supported GPU and the SSDTs have been made so they will not be used in any other Operating System apart from MacOS.
       
      OpenCore 059 Z390 Master 19,1 010620.zip - OpenCore v0.5.9, SMBios iMac19,1
      OpenCore 059 Z390 Master 1,1 010620.zip - OpenCore v0.5.9, SMBios iMacPro1,1 (IGPU Disabled)
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
      Note 2 - Do not try to carry across your old OpenCore Config.plist to the new EFI as to many changes have occurred in 0.5.9. Use the new Config.plist instead.
       
       
      PlistEdit Pro.zip - PlistEdit Pro (use to edit OpenCore)
       
      Using PlistEdit Pro add your details by modifying the following 

       
      PLEASE NOTE - These EFIs are setup to be used with your msr Unlocked so make sure you use the F11c Unlocked Profile but if for any reason you can not unlock MSR then just modify following in the OpenCore config.plist :
      
       
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       

       

       

       

       

       

       

       
      OpenCore 058 Z390 Master 1,1 040520.zip
    • By batty86
      Buonasera a tutti, ho bisogno di aiuto per l'installazione di Mojave sul pc in firma. Ho provato ad installarlo, tutto procede bene, solo che al secondo riavvio dal ssd di destinazione del oS l'installazione procede fino alla maschera di configurazione del computer ma si riavvia non consentendomi di configurarlo, va loop di riavvio. Sono grato in anticipo per il vs aiuto.
    • By ludufre
      Installing macOS Catalina 10.15.5 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      05/27/2020 20:02h GMT-0
      - Update instructions 10.15.5.
       
      03/24/2020 20:23h GMT-0
      - Update instructions 10.15.4.
       
      01/30/2020 23:54h GMT-0
      - Update instructions 10.15.3.
       
      12/11/2019 03:58h GMT-0
      - Update instructions 10.15.2.
      - Updated EFI folder attached.
       
      11/30/2019 18:03h GMT-0
      - Changed Device -> Graphics platform to fix dual HDMI monitor.
      - Updated EFI folder and config.plist
       
      11/29/2019 21:28h GMT-0
      - Added full EFI folder as requested.
       
      11/27/2019 02:33h GMT-0
      - Added BIOS profiles for ease.
       
      11/25/2019 22:45h GMT-0
      - Fixed wrong ethernet link (IntelMausi.kext).
      - Thanks to @MiMoHo
       
      11/24/2019 04:56h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i7-8700K ->  Work. All SpeedStep stages.
      - Video Card: Intel UHD 630 ->  Work. QE/CI and Metal.
      - Chipset: Intel Z370 ->  Work.
      - HDMI 2.0 (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Work.
      - Audio: ALC1220 ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Not work. Replaced with BCM94360CS2.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Todo
       
      - Empty
       
      What you need to install
       
      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Catalina install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction  This will take about 30 minutes.
       


      Install bootloader
       
      Download the CloverEFI from official repository (used 5099) and install only with these options on "Install macOS Catalina":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - Recommended Drivers - FSInject (I still don't know if it's really necessary)
      - UEFI Drivers - File System drivers - ApfsDriverLoader (Support to APFS partitions)
      - UEFI Drivers - File System drivers - VBoxHfs (Support HFS/HFS+ partitions)
      - UEFI Drivers - Memory fix drivers - AptioMemoryFix (Fix the memory management of de UEFI/BIOS)
      - UEFI Drivers - Additional drivers - NvmExpressDxe (If you are going to use NVMe)
       
      FileVault 2
       
      If you plan to use FileVault 2, you need to download additional drivers, since what comes with Clover is not up to date and use VirtualSMC instead of FakeSMC.
      Follow instructions bellow:
       
      From current Clover installation, check these options to USB keyboard/mouse work on password screen:
      - UEFI Drivers - Human Interface Devices - UsbKbDxe
      - UEFI Drivers - Human Interface Devices - UsbMouseDxe
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      Download the versions 2.1.0 and 2.0.9 of AppleSupportPkg from: https://github.com/acidanthera/AppleSupportPkg/releases
      We need the last version of AppleGenericInput.efi that is inside 2.1.0 and last version of AppleUiSupport.efi that is inside 2.0.9.
      OR download attached bellow.
       
      Put in /Volumes/EFI/EFI/CLOVER/drivers/UEFI/
       
      That's it! FileVault 2 will work without problems.
       

       
       
       
      Make things works
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      - Replace the /Volumes/EFI/EFI/CLOVER/config.plist with mine attached below according to your processor version.
      - Put all SSDT-*.aml attached below in /Volumes/EFI/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.8.0.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Copy the Clover Configurator to flash drive because you will need later.
       
      Download those Kexts and put in /Volumes/EFI/EFI/CLOVER/kexts/Other/
       
      - Download the VirtualSMC.kext, SMCProcessor.kext, SMCSuperIO.kext and UEFI driver (put VirutalSmc.efi inside /Volumes/EFI/EFI/drivers/UEFI/). I used the version 1.0.9.
      - Download the Lilu.kext from here. I used the version 1.3.9.
      - Download the WhateverGreen.kext from here. I used the version 1.3.4.
      - Download the AppleALC.kext from here. I used the version 1.4.3.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the IntelMausi.kext from here. I used the version 1.0.2.
      - Download the SmallTree-Intel-211-AT-PCIe-GBE.kext attached bellow to enable second ethernet.
       
      Important! If you are coming from my previous Mojave guide, please note that I am using some kexts from other repositories / authors.
       
      Wifi and Bluetooth (BCM94360CS)
       
      Works out of box (plug 'n' play).
       
       
      Now you can start the installation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is F10 (I use an 8th generation processor, so I don't need to upgrade)
       
      You can configure manually or load my BIOS profile.
       
      Manually:
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: BIOS - CSM Support to Disabled
      - Change value: BIOS - Secure Boot to Disabled
      - Change value: Peripherals - Initial Display to IGP
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Save & Exit Setup
       
      or, BIOS profile
      You can use one of my BIOS profiles attached bellow.
      It's two versions. One stock (Geekbench 4: 5840/27384) and another with overclock [5.0 GHz] (Geekbench 4: 6360/30348)
      - Put the profile in the root of the flash drive at EFI partition.
      - Restart with DEL pressed to enter BIOS setup.
      - Go to Save & Exit.
      - Select Load Profiles.
      - Select last option and then the flasdrive in the list.
      - And finally choose MACOS_STOCK or MACOS_5GHZ.
      - Save & Exit Setup
       
      Then:
      - Now, hold the F12
      - In the list, select your flash drive.
      - Choose the flash drive (white icon).
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press ESC again and select the flash drive.
       
      Choose the internal disk (gray hdd icon) if not already selected.

      The second part of the installation will begin. This will take 16 minutes.

       
      Post installation
       
      Bootloader

      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to make the system disk bootable.

      Open the Clover Configurator from flash drive that you copied before.

      Mount and open the flash drive EFI partition. (Inside Clover Configurator, Mount EFI -> Select flash drive in Efi Partitions list -> Mount Partition -> Open Partition)
       
      Copy the EFI folder to desktop.
       
      Go back to Clover Configurator, unmount the EFI partition of the flash drive and mount and open the EFI partition of internal disk.
       
      Move the EFI folder from Desktop to EFI partition of the internal disk.
       
      Eject the flash drive.
       
      Move all Kexts from EFI partition of internal disk to /Library/Extensions and make kext cache, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/10.15/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
      Last thing
       
      Run this command in Terminal to disable hibernation (doesn't work in macOS):
      sudo pmset -a hibernatemode 0  
       
      It's done!
       
       
      System Updates
       
      10.15.2
       
      Before install, update the following kexts:
      - Lilu.kext. I used version 1.4.0.
      - WhateverGreen.kext. I used version 1.3.5.
      - AppleALC.kext. I used version 1.4.4.
      (all download links above)
       
      Download the latest CLOVERX64.efi.zip build. I used version 5100.
      Mount EFI partition and unzip to:
      - /Volumes/EFI/EFI/CLOVER/CLOVERX64.efi
      - /Volumes/EFI/EFI/BOOT/BOOTX64.efi (rename the copy of CLOVERX64.efi to BOOTX64.efi
       
      Install update. Will reboot at least four time.
       
       
      10.15.3
       
      Updated with success without changing anything.
       
       
      10.15.4
       
      Before install, update the following kexts:
      - Lilu.kext. I used version 1.4.2.
      - WhateverGreen.kext. I used version 1.3.7.
      - AppleALC.kext. I used version 1.4.7.
      - VirtualSMC.kext. I used version 1.3.7.
      (all download links above)
       
      Download the latest CLOVER installer. I used version 5107.
      - Install respecting the configuration mentioned above in "Install bootloader" section.
       
      Install update. Will reboot at least four time.
       
       
      10.15.5
       
      - Same as usual, update all Kexts and Clover.
      - Install Update, reboot.
       
      If you like me, I had a problem with two monitors. I needed to roll back two Kexts of video from 10.15.4: FixGraphics10.15.5.zip
      After replace, fix permissions and cache.
       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
       
      Attachments
       
      config.plist v2.zip
      EFI v4.zip
      Filevault 2 additional drivers.zip
      SmallTree-Intel-211-AT-PCIe-GBE.kext.zip
      SSDTs.zip
      MACOS_5GHZ
      MACOS_STOCK
       
       
       
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
        Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell   https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Skylake, Kabylake and Coffeelake is here https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
×