Jump to content
MaLd0n

[Guide] Sierra / High Sierra / Mojave / Catalina on mobos Serie 100 / 200 / 300 / 400 SkyLake / KabyLake / CoffeeLake / CometLake DSDT

5,430 posts in this topic

Recommended Posts

HI Mald0n,

Could you please patch my dsdt. My Mobo Gigabyte b250-hd3p + i5 6500

 

I use your clover directory to install Mojave.

Should I install/remove some kext ?

Thanks

 

CLOVER.extract.zip

Edited by barnum

Share this post


Link to post
Share on other sites
Advertisement
2 hours ago, MaLd0n said:

DSDT.aml.zip

video check here

thanks i was trying to use the FB-Patcher but i didnt have any luck but i didn't have the link to the read up so im gonna do that now .oh and tried using the new dsdt that you just sent but the system wouldn't boot idk if it has anything to do with the debug lilu and boot flags that i just added 

 

Share this post


Link to post
Share on other sites
1 hour ago, jamvybz said:

 

it seems like the system not booting has nothing to do with the dsdt it just seem not not boot anytime i try someone new like a new kext but it takes for ever to start boot again it just keeps restart im lost to whats going on.

20190112_132627.jpg

Edited by jamvybz

Share this post


Link to post
Share on other sites
8 hours ago, barnum said:

HI Mald0n,

Could you please patch my dsdt. My Mobo Gigabyte b250-hd3p + i5 6500

 

I use your clover directory to install Mojave.

Should I install/remove some kext ?

Thanks

 

CLOVER.extract.zip

u can use it without any problem, check in nioreg what lan kext is load and use only correct ket for ur lan

7 hours ago, jamvybz said:

it seems like the system not booting has nothing to do with the dsdt it just seem not not boot anytime i try someone new like a new kext but it takes for ever to start boot again it just keeps restart im lost to whats going on.

 

u need create a correct patch for u

Share this post


Link to post
Share on other sites

okay, I managed to solve the problem, which seems to be with the installer USB I created. I downloaded and used the Olarilla image (thanks Mald0n!!:)), and everything worked perfectly pretty much from that point on. I have USB, Sleep, and the basic GPU detected. sorry about my panic earlier! 

 

a few questions though:

1. having a weird issue where I get the EFI partition for the boot drive showing up and then sometime after booting (maybe and hour or two?) it unexpectedly dismounts that partition as well as another mounted drive. the rest of the drives are untouched. it shouldn't be normally showing the EFI partition I would think. have you heard of this?

 

2. the system shows I have a 650Ti card but the menu bar isn't transparent, and the System Profiler does not show the 'QE' designation that I remember. I upgraded from Yosemite and it seems like Quartz Extreme is being replaced by Metal. So should the menu bar normally be transparent if the card is fully recognized?

 

3. i have software on other drives that needs to run under Yosemite, but I'm not sure what needs to be done to the kexts or the Clover boot configuration to do this. i seem to remember that you could have different folders for different OS versions to load specific kexts. i know there is a strong tendency to always go for the latest and greatest, but what forum area should I post on to be able to switch between 10.13 and 10.10? 

 

4. any easy way to get ALC1220 audio drivers to work? the system doesn't show anything. would prefer without DSDT if possible, but happy to use it if I need to.

Share this post


Link to post
Share on other sites

HI Mald0n,

Could you please patch my dsdt.

 

My Hardware:

Motherboard: Gigabyte Z270M-D3P

CPU: i5 6600k HD 530

Graphics: NVIDIA GTX 760 (planned)

 

Thanks a lot in advance!

Send me Denniss-iMac.zip

Edited by DJ_Mic

Share this post


Link to post
Share on other sites
On 1/13/2019 at 1:45 AM, MaLd0n said:

u can use it without any problem, check in nioreg what lan kext is load and use only correct ket for ur lan

u need create a correct patch for u

I use it and it work well but can you patch my DSDT ?

 

Thanks

 

Edited by barnum

Share this post


Link to post
Share on other sites
On 1/14/2019 at 1:56 AM, MaLd0n said:

I plugged in my GTX 760 and i got this error.

IMG_3669.JPG

 

Could you fix maybe also shutdown kernel panic? Every time I restart, I get a error message on boot, that the system could not shutdown correctly.

 

Can you fix maybe my USB ports too? Tried the Intel FB-Patch, but can't get any USB 3 device working.

Edited by DJ_Mic

Share this post


Link to post
Share on other sites

Hi

This is really valuable article for me

Actually I am beginner on hackintosh build and I tried over 1 week but failed.

 

I am using special one

Motherboard: ONDA B150S QG

CPU: i5 6400 skylake

Intel UHD 520

Sound: Realtek ALC662

 

I was trying install mac High Sierra 10.13.4

 

This is urgent and serious and pliz pliz pliz help me :help:

 

can you guide me how to configure hackintosh?

picturemessage_kpfslaqj.mzl.png

picturemessage_puc1npgi.lri.png

Edited by Poo Zhang
attached more detail

Share this post


Link to post
Share on other sites
1 hour ago, Poo Zhang said:

Hi

This is really valuable article for me

Actually I am beginner on hackintosh build and I tried over 1 week but failed.

 

I am using special one

Motherboard: ONDA B150S QG

CPU: i5 6400 skylake

Intel UHD 520

Sound: Realtek ALC662

 

I was trying install mac High Sierra 10.13.4

 

This is urgent and serious and pliz pliz pliz help me :help:

 

can you guide me how to configure hackintosh?

picturemessage_kpfslaqj.mzl.png

picturemessage_puc1npgi.lri.png

follow first post

Share this post


Link to post
Share on other sites
8 hours ago, MaLd0n said:

follow first post

I have followed but when click `install from Mac Sierra` it shows console and some operations were progressed

and then black screen

I think there is a problem in my Clover

I have used clover that you posted on first post

have you got any idea?

I am not sure how to generate SSDT and DSDT with picker-alpha

I have no knowledge about this stuff :unsure:

If would be great if you generate Clover so that I can only copy paste :D

 

Thanks

Edited by Poo Zhang

Share this post


Link to post
Share on other sites
1 hour ago, Poo Zhang said:

I have followed but when click `install from Mac Sierra` it shows console and some operations were progressed

and then black screen

I think there is a problem in my Clover

I have used clover that you posted on first post

have you got any idea?

I am not sure how to generate SSDT and DSDT with picker-alpha

I have no knowledge about this stuff :unsure:

If would be great if you generate Clover so that I can only copy paste :D

 

Thanks

You need to make a Signature so that people know what sort of HW you have.

Then somebody may be able to help you further.

Share this post


Link to post
Share on other sites

Hey Maldon, Needing help with your magic again lol. New board and CPU and RAM. All is currently working flawless. But nothing in PCI devices is showing. Ive Attached your debugging files. 

Many thanks as always. :)

Send me iMac.zip

Share this post


Link to post
Share on other sites
4 hours ago, tikizondo94 said:

Hey Maldon, Needing help with your magic again lol. New board and CPU and RAM. All is currently working flawless. But nothing in PCI devices is showing. Ive Attached your debugging files. 

Many thanks as always. :)

Send me iMac.zip

DSDT.aml.zip

Check a correct config for ur hardware in my clover folder serier 10/20/30

https://olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip

Share this post


Link to post
Share on other sites

Hey Maldon, Needing help for patching my DSDT. can't sleep and USB 3.0 got limits, etc.

 

My Hardware

 

Board : ASrock Z170 Pro 4

CPU : Intel Core i3 6100 3.70GHz

Memory : 12 GB 2400Mhz @3slots 4GB

GPU : Intel HD Graphics 530

Storage : INTEL SSD 120GB

Audio Related ALC 892

LAN : Intel i219V

Wireless LAN : TP LINK TL-WN7200ND

Mac OS : Mojave 10.14.2

 

thanks a lot.

Send me Aris-iMac.zip

Edited by ariqk88

Share this post


Link to post
Share on other sites
6 hours ago, ariqk88 said:

Hey Maldon, Needing help for patching my DSDT. can't sleep and USB 3.0 got limits, etc.

 

My Hardware

 

Board : ASrock Z170 Pro 4

CPU : Intel Core i3 6100 3.70GHz

Memory : 12 GB 2400Mhz @3slots 4GB

GPU : Intel HD Graphics 530

Storage : INTEL SSD 120GB

Audio Related ALC 892

LAN : Intel i219V

Wireless LAN : TP LINK TL-WN7200ND

Mac OS : Mojave 10.14.2

 

thanks a lot.

Send me Aris-iMac.zip

DSDT.aml.zip

--USB Fix
https://olarila.com/forum/viewtopic.php?p=65287#p65287

Share this post


Link to post
Share on other sites

hi @MaLd0n,

How to enable igpu +dgpu on mojave 10.4.2

my spec

i5 8400 -(uhd 630)

h370 hd3-(gigabyte latest bios)

8gb 2400,

rx 580 4gb,

system definition= imac 18.3

any solution?

i used your post instalation clover.

 

Edited by corbiz

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ThomasMattOnline
      Hello Everyone,

      Trying to get Hardware Acceleration working on my Hackintosh (HEVC Support) however I am such a noob, OpenCore is very new to me and would love some support.
      I have included screenshots and the EFI that is currently working on my System, I have USB 2 & 3.0 all working, however, the only thing I can fault is my GPU not being hardware acceleration enabled.

      Final Cut Pro X - Recognises GPU
      VideoProc - Doesn't recognise anything.
       
      (I am running the latest version of OpenCore 0.5.9)

      Things I've tried: I tried following the post https://www.tonymacx86.com/threads/catalina-10-15-2-update-lost-hevc-h265-acceleration.288563/ - No Luck
      I have also tried: https://forums.macrumors.com/threads/activate-amd-hardware-acceleration.2180095/page-53?post=28255048#post-28255048 - No luck either!

      My friend online tells me I shouldn't need such Kext as he has the same build as me but when I load his EFI on my system it boots with no USB 2 or 3.0 (I'm keeping his EFI off here as I've uploaded mine.)

      Please note: I appreciate all (any) pieces of advice and please do bear in mind that I am a noob and may need whatever you say simplifying as I can get easily confused.


      config.plist

    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9400K, 9600K, 9700K, 9900K, 9900KS (All KF Models work but use SMBios iMacPro1,1 instead)
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, RX 5500, 5500 XT, 5600, 5600 XT, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Reference RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM94360CS2 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      CLOVER & OPENCORE EFIs 
      Current EFIs Updated 01/06/2020
       
       
      Clover EFI Update v5118 - 01/06/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
       
      Clover Z390 Master Navi Vega EFI 010620.zip - Vega, Navi (5700, 5700XT etc), Radeon VII DSDT EFI
      Clover Z390 Master Polaris EFI 010620.zip - RX500 Polaris Series (RX590, 580, 570 etc) DSDT EFI
       
      Please Note - I have now set KernelPM to No as standard so if you don’t have a unlocked MSR or not using my MSR Unlocked Bios Profile then go into the Clover Config.plist and set KernelPM to Yes or you won’t be able to boot up. An even better fix would be to unlock your MSR using my profile method.
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
       
       
      OpenCore EFI Update v0.5.9 - 01/06/2020
      Myself and @texem have now created a OpenCore EFI done the way the OpenCore Devs intended it to be made, There is no DSDT in use so you can use this EFI on any supported GPU and the SSDTs have been made so they will not be used in any other Operating System apart from MacOS.
       
      OpenCore 059 Z390 Master 19,1 010620.zip - OpenCore v0.5.9, SMBios iMac19,1
      OpenCore 059 Z390 Master 1,1 010620.zip - OpenCore v0.5.9, SMBios iMacPro1,1 (IGPU Disabled)
       
      Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.
      Note 2 - Do not try to carry across your old OpenCore Config.plist to the new EFI as to many changes have occurred in 0.5.9. Use the new Config.plist instead.
       
       
      PlistEdit Pro.zip - PlistEdit Pro (use to edit OpenCore)
       
      Using PlistEdit Pro add your details by modifying the following 

       
      PLEASE NOTE - These EFIs are setup to be used with your msr Unlocked so make sure you use the F11c Unlocked Profile but if for any reason you can not unlock MSR then just modify following in the OpenCore config.plist :
      
       
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       

       

       

       

       

       

       

       
      OpenCore 058 Z390 Master 1,1 040520.zip
    • By batty86
      Buonasera a tutti, ho bisogno di aiuto per l'installazione di Mojave sul pc in firma. Ho provato ad installarlo, tutto procede bene, solo che al secondo riavvio dal ssd di destinazione del oS l'installazione procede fino alla maschera di configurazione del computer ma si riavvia non consentendomi di configurarlo, va loop di riavvio. Sono grato in anticipo per il vs aiuto.
    • By ludufre
      Installing macOS Catalina 10.15.5 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      05/27/2020 20:02h GMT-0
      - Update instructions 10.15.5.
       
      03/24/2020 20:23h GMT-0
      - Update instructions 10.15.4.
       
      01/30/2020 23:54h GMT-0
      - Update instructions 10.15.3.
       
      12/11/2019 03:58h GMT-0
      - Update instructions 10.15.2.
      - Updated EFI folder attached.
       
      11/30/2019 18:03h GMT-0
      - Changed Device -> Graphics platform to fix dual HDMI monitor.
      - Updated EFI folder and config.plist
       
      11/29/2019 21:28h GMT-0
      - Added full EFI folder as requested.
       
      11/27/2019 02:33h GMT-0
      - Added BIOS profiles for ease.
       
      11/25/2019 22:45h GMT-0
      - Fixed wrong ethernet link (IntelMausi.kext).
      - Thanks to @MiMoHo
       
      11/24/2019 04:56h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i7-8700K ->  Work. All SpeedStep stages.
      - Video Card: Intel UHD 630 ->  Work. QE/CI and Metal.
      - Chipset: Intel Z370 ->  Work.
      - HDMI 2.0 (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Work.
      - Audio: ALC1220 ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Not work. Replaced with BCM94360CS2.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Todo
       
      - Empty
       
      What you need to install
       
      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Catalina install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction  This will take about 30 minutes.
       


      Install bootloader
       
      Download the CloverEFI from official repository (used 5099) and install only with these options on "Install macOS Catalina":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - Recommended Drivers - FSInject (I still don't know if it's really necessary)
      - UEFI Drivers - File System drivers - ApfsDriverLoader (Support to APFS partitions)
      - UEFI Drivers - File System drivers - VBoxHfs (Support HFS/HFS+ partitions)
      - UEFI Drivers - Memory fix drivers - AptioMemoryFix (Fix the memory management of de UEFI/BIOS)
      - UEFI Drivers - Additional drivers - NvmExpressDxe (If you are going to use NVMe)
       
      FileVault 2
       
      If you plan to use FileVault 2, you need to download additional drivers, since what comes with Clover is not up to date and use VirtualSMC instead of FakeSMC.
      Follow instructions bellow:
       
      From current Clover installation, check these options to USB keyboard/mouse work on password screen:
      - UEFI Drivers - Human Interface Devices - UsbKbDxe
      - UEFI Drivers - Human Interface Devices - UsbMouseDxe
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      Download the versions 2.1.0 and 2.0.9 of AppleSupportPkg from: https://github.com/acidanthera/AppleSupportPkg/releases
      We need the last version of AppleGenericInput.efi that is inside 2.1.0 and last version of AppleUiSupport.efi that is inside 2.0.9.
      OR download attached bellow.
       
      Put in /Volumes/EFI/EFI/CLOVER/drivers/UEFI/
       
      That's it! FileVault 2 will work without problems.
       

       
       
       
      Make things works
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      - Replace the /Volumes/EFI/EFI/CLOVER/config.plist with mine attached below according to your processor version.
      - Put all SSDT-*.aml attached below in /Volumes/EFI/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.8.0.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Copy the Clover Configurator to flash drive because you will need later.
       
      Download those Kexts and put in /Volumes/EFI/EFI/CLOVER/kexts/Other/
       
      - Download the VirtualSMC.kext, SMCProcessor.kext, SMCSuperIO.kext and UEFI driver (put VirutalSmc.efi inside /Volumes/EFI/EFI/drivers/UEFI/). I used the version 1.0.9.
      - Download the Lilu.kext from here. I used the version 1.3.9.
      - Download the WhateverGreen.kext from here. I used the version 1.3.4.
      - Download the AppleALC.kext from here. I used the version 1.4.3.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the IntelMausi.kext from here. I used the version 1.0.2.
      - Download the SmallTree-Intel-211-AT-PCIe-GBE.kext attached bellow to enable second ethernet.
       
      Important! If you are coming from my previous Mojave guide, please note that I am using some kexts from other repositories / authors.
       
      Wifi and Bluetooth (BCM94360CS)
       
      Works out of box (plug 'n' play).
       
       
      Now you can start the installation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is F10 (I use an 8th generation processor, so I don't need to upgrade)
       
      You can configure manually or load my BIOS profile.
       
      Manually:
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: BIOS - CSM Support to Disabled
      - Change value: BIOS - Secure Boot to Disabled
      - Change value: Peripherals - Initial Display to IGP
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Save & Exit Setup
       
      or, BIOS profile
      You can use one of my BIOS profiles attached bellow.
      It's two versions. One stock (Geekbench 4: 5840/27384) and another with overclock [5.0 GHz] (Geekbench 4: 6360/30348)
      - Put the profile in the root of the flash drive at EFI partition.
      - Restart with DEL pressed to enter BIOS setup.
      - Go to Save & Exit.
      - Select Load Profiles.
      - Select last option and then the flasdrive in the list.
      - And finally choose MACOS_STOCK or MACOS_5GHZ.
      - Save & Exit Setup
       
      Then:
      - Now, hold the F12
      - In the list, select your flash drive.
      - Choose the flash drive (white icon).
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press ESC again and select the flash drive.
       
      Choose the internal disk (gray hdd icon) if not already selected.

      The second part of the installation will begin. This will take 16 minutes.

       
      Post installation
       
      Bootloader

      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to make the system disk bootable.

      Open the Clover Configurator from flash drive that you copied before.

      Mount and open the flash drive EFI partition. (Inside Clover Configurator, Mount EFI -> Select flash drive in Efi Partitions list -> Mount Partition -> Open Partition)
       
      Copy the EFI folder to desktop.
       
      Go back to Clover Configurator, unmount the EFI partition of the flash drive and mount and open the EFI partition of internal disk.
       
      Move the EFI folder from Desktop to EFI partition of the internal disk.
       
      Eject the flash drive.
       
      Move all Kexts from EFI partition of internal disk to /Library/Extensions and make kext cache, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/10.15/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
      Last thing
       
      Run this command in Terminal to disable hibernation (doesn't work in macOS):
      sudo pmset -a hibernatemode 0  
       
      It's done!
       
       
      System Updates
       
      10.15.2
       
      Before install, update the following kexts:
      - Lilu.kext. I used version 1.4.0.
      - WhateverGreen.kext. I used version 1.3.5.
      - AppleALC.kext. I used version 1.4.4.
      (all download links above)
       
      Download the latest CLOVERX64.efi.zip build. I used version 5100.
      Mount EFI partition and unzip to:
      - /Volumes/EFI/EFI/CLOVER/CLOVERX64.efi
      - /Volumes/EFI/EFI/BOOT/BOOTX64.efi (rename the copy of CLOVERX64.efi to BOOTX64.efi
       
      Install update. Will reboot at least four time.
       
       
      10.15.3
       
      Updated with success without changing anything.
       
       
      10.15.4
       
      Before install, update the following kexts:
      - Lilu.kext. I used version 1.4.2.
      - WhateverGreen.kext. I used version 1.3.7.
      - AppleALC.kext. I used version 1.4.7.
      - VirtualSMC.kext. I used version 1.3.7.
      (all download links above)
       
      Download the latest CLOVER installer. I used version 5107.
      - Install respecting the configuration mentioned above in "Install bootloader" section.
       
      Install update. Will reboot at least four time.
       
       
      10.15.5
       
      - Same as usual, update all Kexts and Clover.
      - Install Update, reboot.
       
      If you like me, I had a problem with two monitors. I needed to roll back two Kexts of video from 10.15.4: FixGraphics10.15.5.zip
      After replace, fix permissions and cache.
       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
       
      Attachments
       
      config.plist v2.zip
      EFI v4.zip
      Filevault 2 additional drivers.zip
      SmallTree-Intel-211-AT-PCIe-GBE.kext.zip
      SSDTs.zip
      MACOS_5GHZ
      MACOS_STOCK
       
       
       
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
×