Jump to content
Sinetek

[RYZEN] macOS 10.12.x (Sierra) Kernel Research&Development Thread

780 posts in this topic

Recommended Posts

No i'm doing changes to a SSD connected (/Volumes/Install partition) via USB on my macbook but i didn't install enoch on my mac :)

 

Ahh ok then. In that case it looks like the volume is missing IOSCSIParallelFamily.kext and IOPCIFamily.kext.

 

Could you please explain how to install the kernel? I'm trying to install on a VMware virtual machine.

 

You add it to System/Library/Kernels.

 

Also note guys this isn't the support topic. This is for testing the kernels.

Share this post


Link to post
Share on other sites
Advertisement

Same problem my ryzen system.

If Intel system I will dsdt patch and acpi patch..

But I have no idea with amd chameleon system.

Need patch acpi kext patch or acpi module

If you clear that problem reply again

Check out the "Help Topic Ryzen support" thread, I just posted my Bios settings, the key may be "enabling network stacking". I crashed my build working graphics cards and bios reset. I forgot to enable network stack and got a similar message. After enabled it booted.

Share this post


Link to post
Share on other sites

This kernel no need flag KernelBooter_kets...

attachicon.gifkernel_rc2_ryzen.zip

Thanks for this Ryzen RC2 kernel which can login desktop by Enoch r.2877, but it got KP by Boot RC2 for FX-6300 hackintosh.

After repeated re-boot with flag: -f it can login desktop as by Enoch r.2877 for FX-6300 hackintosh at 10.12.4 now.

But it took longer time to login the desktop due to "busy timeout (0) (60S):  AppleACPICPU........" error during booting.

So I expect it can work in Ryzen hackintosh soon later if I get one for testing !

post-70188-0-72348600-1493336665_thumb.png

post-70188-0-02949200-1493336678_thumb.png

Edited by jsl

Share this post


Link to post
Share on other sites

...and my turn :)

More better works ryzen on Sierra and better than El capitan some native USBs 3 +3.1

but i have one more noob question (sorry again)

the folders and files "extesions" and "frameworks" from major kernel sierra folder must use somewhere ?  :blink:

 

@Bronya you Rock my men. ! Thanks.

 

Update .. i have and a perfect shutdown..  :thumbsup_anim:

                Sound Good with VoodooHDA.

 

post-783357-0-71742400-1493362289_thumb.jpg

Share this post


Link to post
Share on other sites

Good News, RX 480 works on Ryzen Sierra!   With helper card on first test.


RX 480 CU fix works!     Unfortunately the Helper card takes up 8 lanes and cuts down on the performance of RX (8 vs 16) PCI lanes.   My Pentium g3258 RX 480 for comparison.    I'll try it in number one slot, get ready for the black screen after boot.


Thank You Bronya, This is great!    Some minor bugs but its a new platform so time will smooth these things out.    This is Awesome!

post-1753549-0-18050600-1493536526_thumb.png

post-1753549-0-20504400-1493536558_thumb.png

post-1753549-0-22742500-1493537203_thumb.png

post-1753549-0-14237000-1493538253_thumb.png

post-1753549-0-36415400-1493538385_thumb.png

Share this post


Link to post
Share on other sites

I was able to get Black screen with RX in Slot0, yeah!     I put the Nvidia in slot 1 but it doesn't work.    Slot 0 Nvidia 8400gs 1gb, and Slot 1 RX 480 8gb XFX reference model.   No crashes in Uningine benchmarks, or Geekbench.    Using the VGA port of the Nvidia 8400gs and setting my GUI or screen resolution to 1920x1080 makes the VGA drop out and the RX HDMI take over.    VGA has the Landscape screen and RX has the tool bars.

 

post-1753549-0-00895300-1493543154_thumb.png

post-1753549-0-78431300-1493543201_thumb.png

post-1753549-0-42390700-1493543239_thumb.png

post-1753549-0-96581800-1493543264_thumb.png

post-1753549-0-44638400-1493543789_thumb.png

Share this post


Link to post
Share on other sites

Please, everything that has nothing to do with kernel developement belongs into the help topic ! there you can discuss the other topics! I ask for your understanding, since I will remove all messages which have nothing to do with kernel development.

Share this post


Link to post
Share on other sites

Here's a screnshot of my extensions folder S/L/E, no Nullcpupower or Fakesmckext?     This things running without them placed there, and not too shabby.

post-1753549-0-78224900-1493571576_thumb.png

Share this post


Link to post
Share on other sites

Here's a screnshot of my extensions folder S/L/E, no Nullcpupower or Fakesmckext?     This things running without them placed there, and not too shabby.

look in your E/E folder, there you will find the FakeSMC and Nullpower etc.

Share this post


Link to post
Share on other sites

look in your E/E folder, there you will find the FakeSMC and Nullpower etc.

 

Yes, are they loading from the extra folder?    Is the Voodoo 8 core loading as well?   The boot as I mentioned has a lot going on or in and takes close to 2 minutes.    

 

Here's my IORegistry I don't see FakeSMCclient or NullCPUPower kexts?     

Share this post


Link to post
Share on other sites

on top , even if u try an older kernel before the decrypter  found its way inside. the latest Enoch 2877 has the FakeSMC /decrypted binaries also included  :wink_anim:

 

 

and the embedded Kernel patcher (kernelbooter_kexts) from Enoch  allows u using /Extra/Extensions Folder from Chameleon again so a valid prelinkedkernel  (pseudo kextcache ) isnt necessary to  begin with.

 

aslong u boot with UseKernelCache=No.. ( nothing new but just to mentioned it again since so many newbies will pop up now ).

 

 

 i was reading as well for the sierra kernel, bronya embedded this  feature (kernelbooter_kexts)  inside , needs testing and proper documentation somewhere before it gets lost .

 

 fyi for tests  : the boot flag to skip the enoch embedded kernelpatcher SkipKP=Yes ( not sure though if this affects bronyas patch  as well thats why it needs testing )

Share this post


Link to post
Share on other sites

In kernel included decrypt and automatic nullcpu... ))

Thanks for your Ryzen kernel and boot which can login desktop for 1700X hackintosh at 10.12.4 & 10.11.6 now.

But there are severe bugs found after booting:

1. Timer runs too fast (almost double the normal speed)

2. Poor performance in Cinebench R15 (only 10% of Windows 10 Pro by the same hardware and BIOS settings)

3. Very unstable (frequently crashed & KP by not found correct CPU errors)

 

I have found at least two errors from sysctl -a shown at ryzen1700X.txt:

1. TSC frequency is incorrect (machdep.tsc.frequency: 1645449696)

2. Kernel Clockrate is incorrect (kern.clockrate: { hz = 100, tick = 10000, tickadj = 2, profhz = 100, stathz = 100 }

The result checked by EtreCheck was shown at 1700X-10.12.4.rtf for your reference.

 

Is there any other users of Ryzen hackintosh suffered from the similar issues as mine ?

How can I fix it ?

ryzen1700X.txt

post-70188-0-89825300-1494043615_thumb.jpg

1700X-10.12.4.rtf

Edited by jsl

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×