Jump to content
vit9696

Lilu — kext and process patcher

308 posts in this topic

Recommended Posts

Thanks.

I dont know exactly why happen this problem. So just found and report it you.

Because i like debug and report.

 

Thank you for your help

Have a great day.

 

 

나의 LG-F410S 의 Tapatalk에서 보냄

Actually not at all, I didn't manage to help you.

Have a nice day!

Share this post


Link to post
Share on other sites
Advertisement

Hello vit

 

I have use lilu applealc and coredisplayfixup on my xps 15 9550 with 4k screen.

 

But i found it sometimes dont patch it in right way such as sometimes the coredisplay with no use or sometimes applealc with no use and have a gray icon on bar.

 

I think it maybe the Lilu's problem.

 

I try to see the debug log but i dont know how and where the debug log in.it dont in system.log and boot.log.

Share this post


Link to post
Share on other sites

Hi. Well, I am not sure, to be honest. It could be a bootloader/efi issues actually. I would suggest you check this:

 

— Are you using the latest Lilu version?

— Are you using Lilu from Clover EFI folder (/L/E/ or /S/L/E will likely randomly fail)?

— Are Lilu/AppleALC/CoreDisplayFixup showing in kextstat when they "fail"?

— Is bdmesg output listing Lilu/AppleALC/CoreDisplayFixup injection?

 

To check the debug logs you could use the following terminal command (requires -alcbeta -liludbg boot args):

log show --predicate 'process == "kernel" AND (eventMessage CONTAINS "AppleALC"' OR eventMessage CONTAINS "Lilu"') --style syslog --source

Be aware that it could randomly not print some parts of the log (10.12 feature).

Share this post


Link to post
Share on other sites

@sherlocks use flag -no-zp should fix hibernate issues on memory give it a try

Share this post


Link to post
Share on other sites

@sherlocks use flag -no-zp should fix hibernate issues on memory give it a try

First, thanks information

 

Where is -no-zp boot flag? Support lilu or hibernationfixup?

 

Added. 3/25 can't use hiberantion mode. Hold black screen.

EmuVariableUefi-64.efi + lilu.kext 1.1.1 + hibernation kext(1.1.4) + rc script + -hbfx-dump-nvram.

 

 

나의 LG-F410S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

I got a kernel panic the first time I booted with lilu.kext (1.1.2) and IntelGraphicsFixup.kext (1.1.2) on 10.12.5. I'm currently only using Nvidia graphics (Intel graphics is disabled). I haven't been able to reproduce the kernel panic though.

 

I've attached the boot log which includes the kernel panic. This comes from the serial port which might be a little garbled since the kernel is multi threaded and more than one thread may try to log to the serial port at the same time?

 

If there are other logs that you would like, please reply with instructions for getting those. It would be useful to add those instructions to a "Reporting Problems" section in the Lilu README.md

 

I currently have the kexts installed to /S/L/E. Should I move them to Clover? The Lilu README.md only states that Lilu and the plugins should be in the same folder. Is there a reason why one folder would work better than another? If so, is it possible to make other folders work just as well? Knowing that would help decide where to put these.

joevt Lilu IntelGraphicsFixup kernel panic.txt.zip

Share this post


Link to post
Share on other sites

Try to 1.1.4 and put both kexts in clover folder

 

나의 LG-F410S 의 Tapatalk에서 보냄

where can we find 1.1.4 of these kexts?

Sorry for askin, but i could find only 1.1.1 for lilu and 1.1.2 for IntelGraphicsFixup

Share this post


Link to post
Share on other sites

where can we find 1.1.4 of these kexts?

Sorry for askin, but i could find only 1.1.1 for lilu and 1.1.2 for IntelGraphicsFixup

Aha sorry. Its my mistake. I missunderstood IntelGraphicDVMTfixup.

 

나의 LG-F410S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites

joevt, I have seen this panic randomly happening right after the installation or an upgrade, and it never repeats. The panic log signalises corrupted stack, but so far I am clueless what it might be. Maybe the next os brings some insight.

Share this post


Link to post
Share on other sites

Hello vit9696.

 

I have used Lilu with AppelAlc and CoreDisplayFixup and some more plugins but sometimes this plugins going to failure.

Many times i cant boot into osx because the CDF failed and sometimes i going to the system but have no sound with grey icon.
e83a86b0-4941-11e7-806f-a32f917b7c46.png

But before lilu come out the AppleAlc have no problem anymore so i want to know how can cause this random failure when bootup.

I have try to use lilu-debug and CDF-debug kext to see some debug log but have nothing usefull infomation.

PS:I use this kexts all in Clover folder not SE or SLE.

thanks very much.

Share this post


Link to post
Share on other sites

joevt, I have seen this panic randomly happening right after the installation or an upgrade, and it never repeats. The panic log signalises corrupted stack, but so far I am clueless what it might be. Maybe the next os brings some insight.

I've encountered a couple more kernel panics during startup. One with AppleALC, another with IntelGraphicsFixup again. They don't happen with every restart and I don't restart very often, so they don't bother me too much but I thought I would report them here anyway.

joevt Lilu kernel panics.zip

Share this post


Link to post
Share on other sites

joevt, that's really bad, but it is very nice to see such clean logs, don't hesitate posting more. In Lilu 1.1.3 I added some change that I thought might be relevant to the panics, in particular "Added kernel write protection and interrupt state validation". I don't know if it helps, but try upgrading to the latest Lilu and see if it repeats.

Share this post


Link to post
Share on other sites

Actually not at all, I didn't manage to help you.

Have a nice day!

Any updates of IntelGraphicsFixup for 10.13?

Share this post


Link to post
Share on other sites

joevt, that's really bad, but it is very nice to see such clean logs, don't hesitate posting more. In Lilu 1.1.3 I added some change that I thought might be relevant to the panics, in particular "Added kernel write protection and interrupt state validation". I don't know if it helps, but try upgrading to the latest Lilu and see if it repeats.

I'm using the serial port for those logs. I haven't checked if they're recorded elsewhere in the file system. I have emulated NVRAM so I don't think kernel panics are recorded anywhere? I have a couple FireWire adapters (one from PCIe, another from Thunderbolt), but haven't tested fwkprintf yet. I suppose if you have a motherboard with neither FireWire or a serial port then using two machine debugging over ethernet will allow getting the kernel panic info (I haven't tried it recently). I wonder if an alternative to fwkprintf could be made using HDAudio possibly using analog, but preferably using digital...

 

 

I've installed the latest Lulu and plugins into /System/Library/Extensions

 

AppleALC.kext 1.1.2

IntelGraphicsFixup.kext 1.1.3

NvidiaGraphicsFixup.kext 1.1.2

HibernationFixup.kext 1.1.5

Lilu.kext 1.1.4

LiluFriend.kext 1.0

 

I'm currently not using Hibernation or Intel Graphics but I installed them in case I want to try later.

 

I've restarted a couple times without panic so far.

Share this post


Link to post
Share on other sites

Hi,

 

I'm trying to figure out how to properly use HibernationFixup.kext, but I can't seem to figure it out.

 

I have HibernationFixup, Lilu, and EmuVariable (no native NVRAM here), and using -hbfx-dump-nvram I can get the plist to stay on root by commenting out the line in Clover's RC script. However, Clover doesn't indicate "hibernated" anywhere on next boot (using AptioFix2Drv & Clover r4077). I have NeverHibernate set to false.

 

Am I missing something obvious? Do I need to add a key to FakeSMC?

 

Note: Using hibernatemode 25 for testing.

Share this post


Link to post
Share on other sites

Tested on Z170N-WIFI with ATI Radeon Pro 560 2GB and Intel 6700K without integrated (Intel 530 Turned off in bios) an works perfect on OS X 10.12.6.

 

Thanks!

 

EDIT: Also its working on High Sierra 17A306f

Share this post


Link to post
Share on other sites

Tested on Z170N-WIFI with ATI Radeon Pro 560 2GB and Intel 6700K without integrated (Intel 530 Turned off in bios) an works perfect on OS X 10.12.6.

 

Thanks!

 

EDIT: Also its working on High Sierra 17A306f

 

Great for you.

What does that have to do Lilu ?

Share this post


Link to post
Share on other sites

Holy {censored}, it worx:

 

ASUS ROG Maximus VIII Extreme, latest LILU 1.1.6, new AMD PlugIn 4 LILU , AMD RX480 flashed to RX580, CSM disabled in BIOS, iGPU disabled in BIOS,

2 LG 4k Monitors via DP, 1 Samsung 46" TV via HDMI via DENON X4000 AVR running CLOVER rev 4128. And i got this:ScreenShot2017-07-27at21.17.13.png

NO black screen after verbose boot, still no sound via HDMI, but this seems to be a FB-Sierra Problem, cause under High-Sierra we will have Sound via HDMI through ORINOCO Framebuffer.

Thanx a lot to the coders, who made this possible. YOU MADE MY DAY !!!

 

:thumbsup_anim:

 

EDIT: also working under HIGH SIERRA beta 4 (developer with "-radbeta" as bootargument) including 8-channel HDMI-AUDIO: only with ORINOCO Framebuffer

 

Now i got a perfect system for my behaviours, cause complete disabled iGPU and CSM <--- never need them for booting under WINDOWS10.

Share this post


Link to post
Share on other sites

That's awesome ;)


Holy {censored}, it worx:

 

ASUS ROG Maximus VIII Extreme, latest LILU 1.1.6, new AMD PlugIn 4 LILU , AMD RX480 flashed to RX580, CSM disabled in BIOS, iGPU disabled in BIOS,

 

How do i use that Whatevergreen PlugIn? No sources on the Vit9696 github... 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By headkaze
      Framebuffer patching in Mojave
      Binary patching framebuffers using KextsToPatch in Clover is no longer a viable method in Mojave for Skylake and above. Now you need to use Lilu + WhateverGreen.
       
      Not just for Mojave
      This method of framebuffer patching is not only required for Mojave we recommend it for all previous and future releases of macOS.
       
      Coffee Lake Users
      Please note that the new WhateverGreen will not work with fake Kaby Lake platform-id's. You will need to have either macOS 10.14 Beta 4 (18A336e) or macOS High Sierra 10.13.6 (17G2112). The latter is a special build only available to MacBookPro15,1 or MacBookPro15,2 board id's. You can create a macOS High Sierra 10.13.6 (17G2112) installer by running installinstallmacos.py. (Update: vit9696 added back ability to fake Kaby Lake platform-id's)
       
      Lilu + WhateverGreen
      WhateverGreen is going to replace all the other video patching plugins for Lilu (it currently has merged WhateverGreen, IntelGraphicsFixup, NvidiaGraphicsFixup, Shiki and CoreDisplayFixup). Others will likely follow (such as AppleALC, HibernationFixup and IntelGraphicsDVMTFixup). This is aiming to be the all-in-one solution for video.
       
      Preliminary
      1. Remove:
      - FakePCIID_Intel_HD_Graphics
      - IntelGraphicsFixup
      - NvidiaGraphicsFixup
      - CoreDisplayFixup
      - Shiki
      2. Turn off all graphics injections in Clover:
      - config.plist/Graphics/Inject/ATI=NO
      - config.plist/Graphics/Inject/Intel=NO
      - config.plist/Graphics/Inject/NVidia=NO
      - config.plist/Graphics/ig-platform-id=
      - config.plist/Devices/FakeID/IntelGFX=

      3. Disable DSDT Clover fixes:
      - AddHDMI
      - FixDisplay
      - FixIntelGfx
      - AddIMEI
      4. Disable UseIntelHDMI
      5. Remove boot argument: -disablegfxfirmware
      6. Remove any IGPU and HDMI entries from:
      - config.plist/Devices/Arbitrary
      - config.plist/Devices/Properties
      - config.plist/Devices/AddProperties
      7. Remove any IGPU and HDMI related SSDT and DSDT from:
      - CLOVER/ACPI/patched
      8. Renaming GFX0 -> IGPU
      - WhateverGreen will do this automatically (see caveat below)
      - Be aware that WhateverGreen does not rename all instances of GFX0 -> IGPU but should be okay in most cases
      - You may need to include Clover GFX0 -> IGPU rename for other kexts or ACPI patching that require it
       
      Compile Lilu + WhateverGreen
      Download WhateverGreen. Make sure you place the debug version of Lilu into the root of WhateverGreen before you compile. Install Lilu and WhateverGreen kext's into the usual place. Compile WhateverGreen as debug if you want to view debug output.
       
      Having trouble compiling?
      If you're having trouble compiling you can download the official release binaries or download my (unsupported) build_lilu.sh shell script and run it in a folder to download and build Lilu + WhateverGreen using Xcode automatically. I recommend you try the debug versions first (place them into Clover's EFI/Clover/kexts/Other folder).
       
      Get the device path of your IGPU:
      Download and use the gfxutil tool like so:
      $ ./gfxutil -f IGPU DevicePath = PciRoot(0x0)/Pci(0x2,0x0) ig-platform-id
      For the AAPL,ig-platform-id (AAPL,snb-platform-id for Sandy Bridge) entry Clover requires this value to be in Data format so you need to reverse the bytes. So if you want your platform-id to be 0x3EA50009 first reverse the bytes (0900A53E) then use Xcode's plist editor to add the values to Clover's config.plist.

       
      What ig-platform-id should I use for my system?
      You should choose one that is the closest match to your system. I recommend you do some research on this before choosing one. See post #2 for available options. More info can be found here.
       
      You can determine the generation of your CPU by the first digit after the hyphen.
      Examples:
      - Intel(R) Core(TM) i5-2760QM (Gen 2)
      - Intel(R) Core(TM) i7-5257U CPU @ 2.70GHz (Gen 5)
      - Intel(R) Core(TM) m3-6Y30 (Gen 6)
      - Intel(R) Core(TM) i5-8350U (Gen 8)
       
      Spoofing Intel CPU Gen
      If you need to spoof a different Intel CPU generation you can use the lilucpu=N boot flag. The N refers to the following Intel generations:
      4    SandyBridge 5    IvyBridge 6    Haswell 7    Broadwell 8    Skylake 9    KabyLake 10   CoffeeLake To spoof a CPU you will need to set a valid device-id in your GPU entry in Devices/Properties for the appropriate Intel generation.
       
      Eg. Spoofing Skylake (lilucpu=8 boot flag with device-id=0x16190000), Kaby Lake (lilucpu=9 boot flag with device-id=0x12590000).
       
      Here are some recommended frames:
       
      Gen 2: Sandy Bridge (Intel HD Graphics 2000/3000)
      - S/L/E/AppleIntelSNBGraphicsFB.kext
      - Support started with OS X 10.7.x and ended with macOS 10.13.6
      - Metal support is not available
      - device-id: 0x0102 0x0106 0x010A 0x0112 0x0116 0x0122 0x0126
      - AAPL,snb-platform-id (desktop): 0x00030010 (default)
      - AAPL,snb-platform-id (laptop): 0x00010000 (default)
       
      Gen 3: Ivy Bridge (Intel HD Graphics 2500/4000)
      - S/L/E/AppleIntelFramebufferCapri.kext
      - Support started with OS X 10.8.x
      - device-id: 0x0152 0x0156 0x0162 0x0166
      - AAPL,ig-platform-id (desktop): 0x0166000A (default), 0x01620005
      - AAPL,ig-platform-id (laptop): 0x01660003 (default), 0x01660009, 0x01660004
       
      Gen 4: Haswell (Intel HD Graphics 4200-5200)
      - S/L/E/AppleIntelFramebufferAzul.kext
      - Support started with OS X 10.9.x
      - device-id: 0x0D26 0x0A26 0x0A2E 0x0D22 0x0412
      - AAPL,ig-platform-id (desktop): 0x0D220003 (default)
      - AAPL,ig-platform-id (laptop): 0x0A160000 (default), 0x0A260005 (recommended)
       
      Gen 5: Broadwell (Intel HD Graphics 5300-6300)
      - S/L/E/AppleIntelBDWGraphicsFramebuffer.kext
      - Support started with OS X 10.10.2
      - device-id: 0x0BD1 0x0BD2 0x0BD3 0x1606 0x160E 0x1616 0x161E 0x1626 0x1622 0x1612 0x162B
      - AAPL,ig-platform-id (desktop): 0x16220007 (default)
      - AAPL,ig-platform-id (laptop): 0x16260006 (default)
       
      Gen 6: Skylake (Intel HD Graphics 510-580)
      - S/L/E/AppleIntelSKLGraphicsFramebuffer.kext
      - Support started with OS X 10.11.4
      - device-id: 0x1916 0x191E 0x1926 0x1927 0x1912 0x1932 0x1902 0x1917 0x193B 0x191B
      - AAPL,ig-platform-id (desktop): 0x19120000 (default)
      - AAPL,ig-platform-id (laptop): 0x19160000 (default)
       
      Gen 7: Kaby Lake (Intel HD Graphics 610-650)
      - S/L/E/AppleIntelKBLGraphicsFramebuffer.kext
      - Support started with macOS 10.12.6
      - device-id: 0x5912 0x5916 0x591B 0x591C 0x591E 0x5926 0x5927 0x5923 0x87C0
      - AAPL,ig-platform-id (desktop): 0x59160000 (default)
      - AAPL,ig-platform-id (laptop): 0x591B0000 (default)
       
      Gen 8: Coffee Lake (Intel UHD Graphics 630)
      - S/L/E/AppleIntelCFLGraphicsFramebuffer.kext
      - Support started with macOS 10.13.6 (17G2112) / 10.14 beta 4 (18A336e)
      - device-id: 0x3E9B 0x3EA5 0x3E92 0x3E91
      - AAPL,ig-platform-id (desktop): 0x3EA50000 (default), 0x3E9B0007 (recommended)
      - AAPL,ig-platform-id (laptop): 0x3EA50009 (default)
       
      Framebuffer Patching
      WhateverGreen does most of the work automatically for you and in most cases you do not need any extra Framebuffer Patching. At the minimum though you should choose an ig-platform-id suitable for your system and place it in config.plist/Devices/Properties like this:

      Here are some reasons why you might need extra Framebuffer Patching:
      - Setting DVMT for those who can't set it above 32 MB in BIOS (framebuffer-stolenmem / framebuffer-fbmem)
      - Setting higher VRAM for 4K users who experience graphical glitches (framebuffer-unifiedmem)
      - Disabling eGPU (disable-external-gpu)
      - Enable pixel clock patch for 4K support (enable-hdmi20)
      - Disabling connectors to enable sleep (framebuffer-pipecount / framebuffer-portcount / framebuffer-conX-type=-1)
      - Removing CNConnectorAlwaysConnected flag for eDP laptop screens on < 10.13.6 (framebuffer-con0-flags=0x00000090)
      - Changing connector types to match your systems ports (framebuffer-conX-type)
       
      Framebuffer Patching Types
      We have three different types of patches:
       
      1. Arbitrary (Recommended)
      framebuffer-patch-enable (required to enable below) framebuffer-framebufferid (optional; defaults to current platform-id) (all below are optional) framebuffer-mobile framebuffer-pipecount framebuffer-portcount framebuffer-memorycount framebuffer-stolenmem framebuffer-fbmem framebuffer-unifiedmem framebuffer-cursormem (Haswell only) framebuffer-camellia framebuffer-flags framebuffer-conX-enable (required to enable below) framebuffer-conX-index framebuffer-conX-busid framebuffer-conX-pipe framebuffer-conX-type framebuffer-conX-flags 2. All Data
      framebuffer-conX-enable (required to enable below) framebuffer-conX-alldata 3. Find / Replace
      framebuffer-patchX-enable (required to enable below) framebuffer-patchX-framebufferid (optional; defaults to current platform-id) framebuffer-patchX-find framebuffer-patchX-replace framebuffer-patchX-count (optional; defaults to 1) You should place your patches in config.plist/Devices/Properties in Clover config.plist.
       
      Here are some example patches:
      - 32MB BIOS, 19MB stolen (framebuffer) 9MB fbmem (cursor) 2048MB unifiedmem (vram)

       
      - Pipe / Port Count 3 to 2
      - Connector 1 DP to HDMI
      - Connector 2 Disable

       
      Here is an example of the All Data method:

       
      Here is an example of the Find / Replace method:

       
      Framebuffer Dumps
      There are two ways to dump your framebuffer data (both require WhateverGreen + Lilu debug versions):
       
      1. Using -igfxdump boot flag to dump IGPU framebuffer kext to /AppleIntelFramebuffer_X_Y (root of your boot drive)
       
      There are several ways of reading this dump:
      - Using 010 Editor along with the IntelFramebuffer.bt template
      - Using Hackintool File->Open menu
       
      2. Using -igfxfbdump boot flag to dump native and patched framebuffer table to ioreg at IOService:/IOResources/WhateverGreen
       
      There are several ways of reading this dump:
      - Using dump_platformlist.sh shell script
      - Using Hackintool File->Import->IOReg Dump menu
       
      3. Using Hackintool Framebuffer->macOS 10.14 menu
       
      Debug Output
      To get debug output from Lilu use the -liludbgall liludump=60 boot flags. You will need to compile Lilu and WhateverGreen as debug for both of these flags to work. Log files should be located at /var/log/Lilu_*.
       
      To view debug paste the following into Terminal (weglog.txt will output to your home directory):
      log show --predicate 'process == "kernel" AND (eventMessage CONTAINS "WhateverGreen" OR eventMessage CONTAINS "Lilu")' --style syslog --source --last boot >weglog.txt Getting Help

      To help the users of this forum diagnose issues with your configuration please generate a Lilu debug log and then run gen_debug.sh to generate a folder of debug files you can attach to a forum post requesting help.

      Credits
      - vit9696 and lvs1974 for WhateverGreen (Full Credits) and Lilu (Full Credits)
      - Andrey1970 for his guide on applelife.ru
      - RehabMan for all data patching method, ioreg framebuffer dump and other contributions
       


    • By poles89
      Hi guys,
       
      Though native graphics acceleration is supported on i3 from Mojave, I'm not able to manage to get it.
       
      This is my system configuration :
      Motherboard:  Asus Prime H370-Plus
      CPU: i3-8100 (UHD 630)
      OS: Mojave 10.14.2
       
      I'm trying every possible way to get full graphics acceleration. But whatever I try it shows only 4MB video memory or leads to Kernal Panic. Here are some ways I have tried so far:
       
      Prerequisites: 
      Installed latest Lilu+WEG on L/E. set DMVT prealloc to 64MB on bios.  
      Option 1: IntelGFX-> 0x3E928086, ig-platform-id-> 0x3E9B0007, Inject Intel = true. Output:  Kernal Panic
      Option 2: Blank IntelGFX, blank ig-platform-id, Inject Intel = false Output:  Kernal Panic
      Option 3:  IntelGFX-> 0x3E928086, ig-platform-id-> 0x5912000, Inject Intel = true.  Output: Booted Successfully but no graphics acceleration.
                     I knew that ig-platform-id-> 0x5912000 doesn't work in mojave and its works only for high sierra but I set this because with this ig-platform-id I can boot. Another way I can boot it by
                     setting invalid Fake IntelGFX value like 0x12345678.
      Option 4:  Downloaded Intel FBPatcher & followed this guide. But as I opened the app, its shows like this:
       
                     
                    
                     It clearly indicates it neither can detect Intel CPU generation nor GPU memory (currently shows 0 MB). I changed to different PlatformId from the drop down but no improvement. Anyway I
                     applied a patch with SMBIOS ->Macmini8,1 by someione's recommendation . I attached a config file (config_fbpather.plist) for this. Output:  Kernal Panic
       
      I have tried the upper mentioned methods with SMBIOS like  iMac14,2 / iMac18[1,2,3]  and Macmini8,1. I'm using HDMI port for display output. Now I don't know whats wrong with theses methods but maybe someone can help me to figure out this problem. I have also attached those config.plist files.
       
      Thanks in advance.
       
      config_fakeid_0x3E928086.plist
      config_fbpatcher.plist
      config_fbpatcher_with_device_id.plist
      config_platform-id_0x59120000.plist
    • By EduardoMenezes
      Good evening, friends of InsanelyMac.
      I have an Acer Aspire E5-571 notebook with Intel processor and Intel Graphics 5500 hd graphics card. When I was using the Sierra, the video card was recognized without problems. Now that I'm using Mojave I can not get the acceleration to work.
      I've been researching something about having to use Lilu.kext and whatevergreen.kext but I do not have enough knowledge to solve this problem.
      I need the help of someone who can explain to me how to solve this acceleration problem. I'm sure it will be of great value to other users like me.
      Thank you very much.

    • By yehia2amer
      I want to patch AppleHDA but I cannot find any post talking about ALC3220, I Tried AppleALC (ALC280 - layout-id 11), and AppleHDA Patcher v1.9  (ALC280 - layout-id 5) with no luck.
      I Also Tried VodooHDA but it is very buggy an unstable !
       
      So Now Please find my Codec details below
      ------
      Linux codec_dump.txt 
       
      Codec: Realtek ALC3220 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0280 Subsystem Id: 0x102805d4 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=5, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker+LO Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC3220 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x3d 0x3d] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC3220 Analog", type="Audio", device=0 Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x27 0x27] Converter: stream=1, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Rear Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Rear Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x03 0x0b Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00] Connection: 2 0x02 0x03 Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x4008c000: [N/A] Line Out at Ext N/A Conn = DIN, Color = UNKNOWN DefAssociation = 0x0, Sequence = 0x0 Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c 0x0d* Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00010014: OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Pincap 0x00000010: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x0f Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Rear Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a13040: [Jack] Mic at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=04, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Front Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19030: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=03, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Line Out Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01014020: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x40400001: [N/A] SPDIF Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=107 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo Connection: 8 0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12 0x13 Node 0x23 [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x18* 0x19 0x1a 0x1b 0x1d 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono  
      Jarvis report:
      Hardware info: - ATI R6xx HDMI (1002:aa01) - Controller 1002:aa30 (sub-ven:174b:aa30) - Driver: VoodooHDA SSDT-4.aml succesfully extracted! DSDT.aml succesfully extracted! SSDT.aml succesfully extracted! SSDT-1.aml succesfully extracted! SSDT-3.aml succesfully extracted! SSDT-2.aml succesfully extracted! Found "Device (HDEF)" in DSDT.aml Found property "layout-id" in DSDT.aml Found 1 occurennces of "layout-id" in ioreg, not sure what's will be for HDEF.. Found unsupported "layout-id = 11" in ioreg, will not work using Mirone's patches!!! No "Device (HDAU)" was found inside your ACPI tables. That is normal w/o a PCI Video card or w/o an HDMI connector on it! AppleHDA Patcher.app only supports (if patched by Mirone): layout-id 2 for laptop's, layout-id 5 for Desktop's with 3 connectors (pink, green and blue), layout-id 7 for Desktop's with 5/6 connectors (gray, black, orange, pink, green and blue), layout-id 9 for Desktop's with 5/6 connectors (gray, black, orange, pink, green, blue, CodecAddress:2) aDummyHDA.kext works only is /System/Library/Extensions. Laptop's may be need the provided ACPI Patch such system_IRQ.txt to be functional. HDAEnabler.kext maybe usefull if you don't want to edit your ACPI table or the Clover's config, or the org.Chameleon.Boot.plist. CodecCommander.kext is usefull in the case you have no sound after waking from sleep. Generated kexts should be installed in a proper way, repairing its permissions and rebuilding the cache: dragging kexts into Pandora's Box.app window will help you to do that!  
      Chipset Name: Intel Corporation C600/X79 series chipset High Definition Audio Controller (rev 06)
      Codec Name: Realtek ALC3220
      Linux Codec Dump : codec_dump.txt
      codec_dump.txt.svg
      Patched DSDT: DSDT.aml
       
       
      Thanks
       
    • By maiconjs
      I have a receiver with 7.1 channels, in which I transmit the formats Dolby Digital and DTS without problems by Windows, through the HDMI output of HD4000. On that same Laptop, I have the Hackintosh, with the High Sierra 10.13.6, and with audio enabled using AppleALC, but in the audio preferences, I can not enable the Digital audio format. Also did not find players like Mirillis SplashPro (which I have used in Windows) with the option of HDMI output Bitstream. Is it possible to enable this digital output on Hackintosh?
×