Jump to content
vit9696

Lilu — kext and process patcher

330 posts in this topic

Recommended Posts

5 minutes ago, barleyjuice said:

This is what it shows.

Also please note this is using -liluoff as im unable to boot without that flag.

Boot into Desktop then run:

sudo rm -f /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache && sudo touch /System/Library/Extensions && sudo kextcache -u / && sudo update_dyld_shared_cache -force
// Reboot
Spoiler

Seems not related to Lilu, but logs said that you're using 2 different SMC's kext at a same time: FakeSMC + VirtualSMC:


.......  .....  ...
172:902  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
172:902  0:000  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_GPUSensors.kext (v.1800)
172:930  0:022  Extra kext: EFI\CLOVER\kexts\Other\SMCSuperIO.kext (v.1.0.2)
172:932  0:002  Extra kext: EFI\CLOVER\kexts\Other\SMCProcessor.kext (v.1.0.2)
172:935  0:002  Extra kext: EFI\CLOVER\kexts\Other\SMCLightSensor.kext (v.1)
172:937  0:002  Extra kext: EFI\CLOVER\kexts\Other\VirtualSMC.kext (v.1.0.2)
173:002  0:045  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_CPUSensors.kext (v.1800)
173:022  0:005  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1800)
173:029  0:006  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
.......  .....  ...

Not sure where this idea came from but I guess, choose 1 of them and don't use both altogether.

 

Share this post


Link to post
Share on other sites
Advertisement

Hi Badruzeus

 

I did run 

sudo rm -f /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache && sudo touch /System/Library/Extensions && sudo kextcache -u / && sudo update_dyld_shared_cache -force

it ran without any errors or failures..

then restarted but getting the same error pointing to lilu ( 1.1) version.  :unsure:

 

IMG_4632.JPG

Share this post


Link to post
Share on other sites
23 minutes ago, barleyjuice said:

It ran without any errors or failures..

then restarted but getting the same error pointing to lilu ( 1.1) version.  :unsure:

Yeah, weird.. where did you previously get Lilu 1.1 and it was installed using which method?

Share this post


Link to post
Share on other sites
17 minutes ago, Badruzeus said:

Yeah, weird.. where did you previously get Lilu 1.1 and it was installed using which method?

 

I honestly never heard of lilu until 1 week ago when my system started crashing.

I used vanilla sierra/clover on h97m-d3h to install over 1.5 years ago. ( i think it was the VioletDragons instructions)

It was running like a dream until last week when it wouldnt boot.

 

I cant remember updating anything meaningful ( to avoid situations like this) especially OS so not sure what happened or what i did wrong.

 

Once i was pointed towards lilu.kext as being the culprit i downloaded the most recent one and copied the 1.3.1 to "Other" folder in EFI 

I should note there was no lilu.kext in the "other" directory in EFI until i copied/installed 1.3.1 ( this is probably the mysterious kext that cant be found)

 

Really odd that i cant find V1.1 anywhere and have tried clearing/rebuilding multiple times with no success.

 

 

Share this post


Link to post
Share on other sites
2 hours ago, barleyjuice said:

Hi

Thanks i think i did the log correctly.

This is what it shows.

Also please note this is using -liluoff as im unable to boot without that flag.

 


0:100  0:100  MemLog inited, TSC freq: 3990761294
0:100  0:000  CPU was calibrated with ACPI PM Timer
0:100  0:000  
0:100  0:000  Now is 14.1.2019,  4:34:16 (GMT)
0:100  0:000  Starting Clover revision: 4844 on American Megatrends EFI
0:100  0:000  Build with: [Args: -nb -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.13.6 | XCODE: 10.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000) @BC134518
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = 1315
0:100  0:000  SmbiosTable.Type17->SerialNumber = 524903325
0:100  0:000  SmbiosTable.Type17->PartNumber = BLS8G3D1609DS1S001.
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = 1315
0:100  0:000  SmbiosTable.Type17->SerialNumber = 524900617
0:100  0:000  SmbiosTable.Type17->PartNumber = BLS8G3D1609DS1S00.
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = 1315
0:100  0:000  SmbiosTable.Type17->SerialNumber = 52490068
0:100  0:000  SmbiosTable.Type17->PartNumber = BLS8G3D1609DS1S001.
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = 1315
0:100  0:000  SmbiosTable.Type17->SerialNumber = 52490210
0:100  0:000  SmbiosTable.Type17->PartNumber = BLS8G3D1609DS1S00.
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'H97M-D3H' with board 'H97M-D3H'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=306C3
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  BrandString = Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
0:100  0:000   The CPU supported turbo
0:100  0:000  MSR 0x35               40008
0:100  0:000  MSR 0xE2 before patch 1E000404
0:100  0:000  MSR 0xCE              00080838_F3012800
0:100  0:000  corrected FLEX_RATIO = E0000
0:100  0:000  FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:100  0:000  MaxDiv/MinDiv: 40.0/8
0:100  0:000  Turbo: 42/43/44/44
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 8
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 4000 MHz
0:100  0:000  TSC: 4000 MHz
0:100  0:000  PIS: 100 MHz
0:100  0:000  ExternalClock: 25 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 0C00 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0C01 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 1187 class=030000
0:100  0:000   - GFX: Model=nVidia GeForce GTX 760 family 1FF (Nvidia)
0:100  0:000  PCI (00|01:00.01) : 10DE 0E0A class=040300
0:100  0:000   - HDMI Audio: 
0:100  0:000  PCI (00|00:02.00) : 8086 0412 class=030000
0:100  0:000   - GFX: Model=Intel HD Graphics 4600 (Intel)
0:100  0:000  PCI (00|00:03.00) : 8086 0C0C class=040300
0:100  0:000  PCI (00|00:14.00) : 8086 8CB1 class=0C0330
0:100  0:000  PCI (00|00:16.00) : 8086 8CBA class=078000
0:100  0:000  PCI (00|00:1A.00) : 8086 8CAD class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 8CA0 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 8C90 class=060400
0:100  0:000  PCI (00|00:1C.02) : 8086 8C94 class=060400
0:100  0:000  PCI (00|03:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 0 Vendor=Realtek
0:100  0:000  PCI (00|00:1C.03) : 8086 8C96 class=060400
0:100  0:000  PCI (00|04:00.00) : 8086 244E class=060401
0:100  0:000  PCI (00|00:1C.04) : 8086 8C98 class=060400
0:100  0:000  PCI (00|06:00.00) : 168C 0030 class=028000
0:100  0:000   - WIFI: Vendor=Atheros
0:100  0:000  PCI (00|00:1D.00) : 8086 8CA6 class=0C0320
0:100  0:000  PCI (00|00:1F.00) : 8086 8CC6 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 8C82 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 8CA2 class=0C0500
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:103  0:003  EFI\CLOVER\config.plist loaded: Success
0:103  0:000  === [ GetListOfThemes ] ===================================
0:104  0:000  - [00]: EMBEDDED
0:105  0:001  - [00]: RANDOM
0:106  0:001  === [ Found config plists ] ===============================
0:106  0:000  - config.plist
0:106  0:000  === [ GetEarlyUserSettings ] ==============================
0:106  0:000  timeout set to 5
0:106  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:106  0:000  KextsToPatch: 2 requested
0:106  0:000   - [00]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 20 in XHCI kext (9-series)) :: MatchOS: 10.11.x :: BinPatch :: data len: 7
0:106  0:000   - [01]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 20 in XHCI kext (9-series)) :: MatchOS: 10.12.x :: BinPatch :: data len: 7
0:106  0:000  Default theme: embedded
0:106  0:000  Hiding entries with string BOOTX64.EFI
0:106  0:000  Hiding entries with string Windows
0:106  0:000  === [ LoadDrivers ] =======================================
0:109  0:003  Loading AudioDxe-64.efi  status=Success
0:112  0:002   - driver needs connecting
0:112  0:000  Loading DataHubDxe-64.efi  status=Success
0:117  0:005  Loading FSInject-64.efi  status=Success
0:119  0:001  Loading SMCHelper-64.efi  status=Success
0:120  0:001  Loading HFSPlus.efi  status=Success
0:122  0:002   - driver needs connecting
0:122  0:000  Loading AppleImageCodec-64.efi  status=Success
0:123  0:001  Loading AppleKeyAggregator-64.efi  status=Success
0:125  0:001  Loading AppleUITheme-64.efi  status=Success
0:126  0:001  Loading EmuVariableUefi-64.efi  status=Success
0:127  0:001  EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success
0:127  0:000  Loading FirmwareVolume-64.efi  status=Success
0:128  0:001  Loading OsxAptioFixDrv-64.efi  status=Success
0:130  0:001  Loading OsxFatBinaryDrv-64.efi  status=Success
0:131  0:001  Loading PartitionDxe-64.efi  status=Success
0:133  0:001   - driver needs connecting
0:133  0:000  Loading VBoxHfs-64.efi  status=Success
0:134  0:001   - driver needs connecting
0:134  0:000  4 drivers needs connecting ...
0:134  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:134  0:000  Partition driver loaded: 
0:134  0:000  HFS+ driver loaded
0:134  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
6:518  6:384  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
6:587  0:068  === [ InitScreen ] ========================================
6:587  0:000  SetMaxResolution: found best mode 4: 1920x1080
6:755  0:168  Video mode change to mode #4: Success
6:755  0:000   - set
6:755  0:000  Console modes reported: 6, available modes:
6:755  0:000   - [01]: 80x25 (current mode)
6:755  0:000   - [02]: 80x50
6:755  0:000   - [03]: 100x31
6:755  0:000   - [04]: 128x30
6:755  0:000   - [06]: 120x50
6:755  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
6:756  0:000  Using embedded font: Success
6:843  0:086  === [ GetMacAddress ] =====================================
6:843  0:000  MAC address of LAN #0= 40:8D:5C:C9:58:B5:
6:843  0:000  === [ ScanSPD ] ===========================================
6:843  0:000  Scanning SMBus [8086:8CA2], mmio: 0xF7A18004, ioport: 0xF040, hostc: 0x11
6:862  0:018  Slot: 0 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLS8G3D1609DS1S00. SerialNo=05020409000302015
6:880  0:018  Slot: 1 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLS8G3D1609DS1S00. SerialNo=05020409000006017
6:899  0:018  Slot: 2 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLS8G3D1609DS1S00. SerialNo=05020409000006018
6:918  0:018  Slot: 3 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLS8G3D1609DS1S00. SerialNo=05020409000201010
6:918  0:000  === [ GetAcpiTablesList ] =================================
6:918  0:000  Get Acpi Tables List from RSDT:
6:918  0:000   - [00]: FACP  A M I len=132
6:918  0:000   - [01]: APIC  A M I len=146
6:918  0:000   - [02]: FPDT  A M I len=68
6:918  0:000   - [03]: SSDT  Ther_Rvp len=3054
6:918  0:000   - [04]: SSDT  Cpu0Ist len=1337
6:918  0:000   - [05]: SSDT  CpuSsdt len=2932
6:918  0:000   - [06]: MCFG  A M I len=60
6:918  0:000   - [07]: HPET  A M I len=56
6:918  0:000   - [08]: SSDT  SataTabl len=877
6:918  0:000   - [09]: SSDT  SaSsdt  len=23390
6:918  0:000   - [10]: BGRT  A M I len=56
6:918  0:000   - [11]: DMAR  BDW  len=184
6:918  0:000  Calibrated TSC Frequency = 3990761294 = 3990MHz
6:918  0:000  === [ GetUserSettings ] ===================================
6:918  0:000  USB FixOwnership: yes
6:918  0:000  Dropping 3 tables:
6:918  0:000   - [00]: Drop table  signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
6:918  0:000           - set table: 54445353,       6D50757043 to drop: no
6:918  0:000   - [01]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
6:918  0:000           - set table: 54445353,   74734930757043 to drop: yes
6:918  0:000   - [02]: Drop table  signature="DMAR" (52414D44)
6:918  0:000           - set table: 52414D44,                0 to drop: yes
6:918  0:000   - final DSDT Fix mask=00000000
6:918  0:000  EnableC6: yes
6:918  0:000  Using ProductName from config: iMac15,1
6:918  0:000  Using latest BiosVersion from clover
6:918  0:000  BiosVersion: IM151.88Z.0219.B00.1809190740
6:918  0:000  BiosReleaseDate: 09/19/2018
6:918  0:000  Using EfiVersion from clover: 222.0.0.0.0
6:918  0:000  Using FirmwareFeatures from clover: 0xF80FE137
6:918  0:000  Using FirmwareFeaturesMask from clover: 0xFF1FFF3F
6:918  0:000  Using PlatformFeature from clover: 0x1
6:918  0:000  Board-ID set from config as Mac-42FD25EABCABB2714
6:918  0:000  BoardType: 0xA
6:918  0:000  ChassisType: 0x13
6:918  0:000  Converted CustomUUID 19318076-A102-5D39-9B41-4212150510091
6:925  0:006  === [ Found DSDT tables ] =================================
6:981  0:055  === [ ScanVolumes ] =======================================
6:981  0:000  Found 13 volumes with blockIO
6:981  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
6:982  0:001  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
6:983  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
6:985  0:002  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
6:985  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
6:986  0:000          Result of bootcode detection: bootable unknown (legacy)
6:991  0:004  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,959E644F-0C18-4C89-83D1-4D0F13BD8970,0x64028,0x1BE80460)
6:991  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
6:992  0:000          Result of bootcode detection: bootable unknown (legacy)
7:002  0:010          This is SelfVolume !!
7:002  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)
7:003  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,E0589854-A446-4574-A6EF-5BB51B592B3E,0x37D0D768,0x135F20)
7:003  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
7:004  0:000          Result of bootcode detection: bootable unknown (legacy)
7:008  0:004  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D1C306E8-66DD-4C1E-9EE9-59D38BAEA89E,0x64028,0x3A2E1FE0)
7:009  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
7:009  0:000          Result of bootcode detection: bootable unknown (legacy)
7:019  0:009  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,D893CF8D-690E-4027-B965-75A17FFF45E8,0x64028,0x74662D60)
7:020  0:000  PutNvramPlistToRtVars: nvram.plist not found
7:020  0:000  === [ InitTheme ] =========================================
7:020  0:000  use night theme
7:020  0:000   using embedded theme
7:020  0:000  Using embedded font: Success
7:020  0:000  theme inited
7:020  0:000  Chosen embedded theme
7:020  0:000  after NVRAM boot-args=-v dart=0 kext-dev-mode=1
7:020  0:000  === [ Dump SMC keys from NVRAM ] ==========================
7:020  0:000  found AppleSMC protocol
7:020  0:000  Registered 0 SMC keys
7:020  0:000  === [ ScanLoader ] ========================================
7:020  0:000  - [04]: 'EFI'
7:020  0:000  - [05]: 'vmfarm-ssd-240'
7:020  0:000  - [06]: 'EFI'
7:022  0:002          AddLoaderEntry for Volume Name=EFI
7:022  0:000          skipped because entry is hidden
7:022  0:000  - [07]: 'Sierra'
7:026  0:003          AddLoaderEntry for Volume Name=Sierra
7:029  0:002      Check if volume Is Hibernated:
7:029  0:000      Check sleep image 'by signature':
7:034  0:004      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
7:034  0:000      using default sleep image name = \private\var\vm\sleepimage
7:037  0:003      no valid sleep image offset was found
7:037  0:000      no valid sleep image offset was found
7:038  0:000      no valid sleep image offset was found
7:038  0:000       sleepimage offset could not be acquired
7:038  0:000      hibernated: no - sign
7:038  0:000  - [08]: 'Recovery HD'
7:039  0:000          AddLoaderEntry for Volume Name=Recovery HD
7:040  0:000  - [09]: 'EFI'
7:040  0:000  - [10]: 'Samsung-500GB'
7:040  0:000  - [11]: 'EFI'
7:040  0:000  - [12]: 'VMFARMZ'
7:040  0:000  Scanning legacy ...
7:040  0:000  === [ AddCustomTool ] =====================================
7:041  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
7:041  0:000  Checking EFI partition Volume 4 for Clover
7:041  0:000  Checking EFI partition Volume 6 for Clover
7:042  0:000   Found Clover
7:042  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
7:042  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
7:111  0:068  === [ GetEfiBootDeviceFromNvram ] =========================
7:111  0:000   - found entry 0. 'Boot macOS from Sierra', Volume 'Sierra', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)\System\Library\CoreServices\boot.efii'
7:111  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
7:111  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
7:111  0:000  not run anime
7:175  0:063  GUI ready
14:930  7:754  not run anime
17:417  2:487  not run anime
23:601  6:183  not run anime
25:017  1:416  not run anime
27:793  2:775  not run anime
33:257  5:463  not run anime
101:425  68:167  not run anime
103:201  1:776  not run anime
106:257  3:055  not run anime
111:825  5:568  
Boot options:
-------------
111:825  0:000  BootOrder: 5: Boot0002, Boot0005, Boot0006, Boot0007, Boot0003
111:827  0:001   0) Boot0002: UEFI: ST1000DM010-2EP102, Attr: 0x1
111:827  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
111:827  0:000      Size: 200 (Attr:4 + FPl:2 + Desc:50 + FP:140 + Opt:4 = 200 -> OK)
111:827  0:000   1) Boot0005: UEFI OS, Attr: 0x1
111:827  0:000      HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)\EFI\BOOT\BOOTX64.EFII
111:827  0:000      Size: 116 (Attr:4 + FPl:2 + Desc:16 + FP:94 + Opt:0 = 116 -> OK)
111:828  0:000   2) Boot0006: UEFI: Samsung SSD 860 EVO 500GB, Attr: 0x1
111:828  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
111:828  0:000      Size: 214 (Attr:4 + FPl:2 + Desc:64 + FP:140 + Opt:4 = 214 -> OK)
111:828  0:000   3) Boot0007: UEFI: MSI REFLEX RX-240, Attr: 0x1
111:828  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
111:828  0:000      Size: 198 (Attr:4 + FPl:2 + Desc:48 + FP:140 + Opt:4 = 198 -> OK)
111:829  0:000   4) Boot0003: Hard Drive , Attr: 0x1
111:829  0:000      BBS(HD,)
111:829  0:000      Size: 735 (Attr:4 + FPl:2 + Desc:24 + FP:13 + Opt:692 = 735 -> OK)
111:829  0:000  
Boot options not in BootOrder list:
132:469  20:640   not found
132:469  0:000  -------------
132:503  0:033  ReinitSelfLib after theme change
132:503  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
132:503  0:000  === [ ScanVolumes ] =======================================
132:503  0:000  Found 13 volumes with blockIO
132:503  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
132:503  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
132:510  0:006  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
132:510  0:000          This is SelfVolume !!
132:510  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
132:518  0:008  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
132:519  0:000          Result of bootcode detection: bootable unknown (legacy)
132:519  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,959E644F-0C18-4C89-83D1-4D0F13BD8970,0x64028,0x1BE80460)
132:519  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
132:521  0:001          Result of bootcode detection: bootable unknown (legacy)
132:521  0:000          This is SelfVolume !!
132:521  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)
132:521  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,E0589854-A446-4574-A6EF-5BB51B592B3E,0x37D0D768,0x135F20)
132:522  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
132:522  0:000          Result of bootcode detection: bootable unknown (legacy)
132:522  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D1C306E8-66DD-4C1E-9EE9-59D38BAEA89E,0x64028,0x3A2E1FE0)
132:523  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
132:543  0:020          Result of bootcode detection: bootable unknown (legacy)
132:543  0:000  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,D893CF8D-690E-4027-B965-75A17FFF45E8,0x64028,0x74662D60)
132:544  0:000  theme inited
132:544  0:000  Chosen embedded theme
132:544  0:000  after NVRAM boot-args=-v dart=0 kext-dev-mode=1
132:544  0:000  === [ ScanLoader ] ========================================
132:544  0:000  - [04]: 'EFI'
132:544  0:000  - [05]: 'vmfarm-ssd-240'
132:544  0:000  - [06]: 'EFI'
132:544  0:000          AddLoaderEntry for Volume Name=EFI
132:544  0:000          skipped because entry is hidden
132:544  0:000  - [07]: 'Sierra'
132:545  0:000          AddLoaderEntry for Volume Name=Sierra
132:545  0:000      Check if volume Is Hibernated:
132:545  0:000      Check sleep image 'by signature':
132:545  0:000      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
132:545  0:000      using default sleep image name = \private\var\vm\sleepimage
132:545  0:000       sleepimage offset could not be acquired
132:545  0:000      hibernated: no - sign
132:545  0:000  - [08]: 'Recovery HD'
132:545  0:000          AddLoaderEntry for Volume Name=Recovery HD
132:545  0:000  - [09]: 'EFI'
132:545  0:000  - [10]: 'Samsung-500GB'
132:546  0:000  - [11]: 'EFI'
132:546  0:000  - [12]: 'VMFARMZ'
132:546  0:000  Scanning legacy ...
132:546  0:000  === [ AddCustomTool ] =====================================
132:546  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
132:546  0:000  Checking EFI partition Volume 4 for Clover
132:546  0:000  Checking EFI partition Volume 6 for Clover
132:546  0:000   Found Clover
132:546  0:000  EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored
132:546  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
132:614  0:068  === [ GetEfiBootDeviceFromNvram ] =========================
132:614  0:000   - found entry 0. 'Boot macOS from Sierra', Volume 'Sierra', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)\System\Library\CoreServices\boot.efii'
132:614  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
132:614  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
132:614  0:000  not run anime
136:057  3:443  not run anime
139:577  3:520  
Boot options:
-------------
139:577  0:000  BootOrder: 5: Boot0002, Boot0005, Boot0006, Boot0007, Boot0003
139:579  0:001   0) Boot0002: UEFI: ST1000DM010-2EP102, Attr: 0x1
139:579  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
139:579  0:000      Size: 200 (Attr:4 + FPl:2 + Desc:50 + FP:140 + Opt:4 = 200 -> OK)
139:579  0:000   1) Boot0005: UEFI OS, Attr: 0x1
139:579  0:000      HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)\EFI\BOOT\BOOTX64.EFII
139:579  0:000      Size: 116 (Attr:4 + FPl:2 + Desc:16 + FP:94 + Opt:0 = 116 -> OK)
139:580  0:000   2) Boot0006: UEFI: Samsung SSD 860 EVO 500GB, Attr: 0x1
139:580  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
139:580  0:000      Size: 214 (Attr:4 + FPl:2 + Desc:64 + FP:140 + Opt:4 = 214 -> OK)
139:580  0:000   3) Boot0007: UEFI: MSI REFLEX RX-240, Attr: 0x1
139:581  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
139:581  0:000      Size: 198 (Attr:4 + FPl:2 + Desc:48 + FP:140 + Opt:4 = 198 -> OK)
139:581  0:000   4) Boot0003: Hard Drive , Attr: 0x1
139:581  0:000      BBS(HD,)
139:581  0:000      Size: 735 (Attr:4 + FPl:2 + Desc:24 + FP:13 + Opt:692 = 735 -> OK)
139:581  0:000  
Boot options not in BootOrder list:
160:221  20:640   not found
160:221  0:000  -------------
160:221  0:000  ReinitSelfLib after theme change
160:221  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
160:221  0:000  === [ ScanVolumes ] =======================================
160:221  0:000  Found 13 volumes with blockIO
160:221  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
160:224  0:002  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
160:230  0:006  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
160:233  0:002          This is SelfVolume !!
160:233  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
160:233  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
160:234  0:000          Result of bootcode detection: bootable unknown (legacy)
160:234  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,959E644F-0C18-4C89-83D1-4D0F13BD8970,0x64028,0x1BE80460)
160:234  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
160:235  0:000          Result of bootcode detection: bootable unknown (legacy)
160:235  0:000          This is SelfVolume !!
160:235  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)
160:235  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,E0589854-A446-4574-A6EF-5BB51B592B3E,0x37D0D768,0x135F20)
160:236  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
160:236  0:000          Result of bootcode detection: bootable unknown (legacy)
160:236  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D1C306E8-66DD-4C1E-9EE9-59D38BAEA89E,0x64028,0x3A2E1FE0)
160:237  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
160:237  0:000          Result of bootcode detection: bootable unknown (legacy)
160:237  0:000  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,D893CF8D-690E-4027-B965-75A17FFF45E8,0x64028,0x74662D60)
160:238  0:000  theme inited
160:238  0:000  Chosen embedded theme
160:239  0:000  after NVRAM boot-args=-v dart=0 kext-dev-mode=1
160:239  0:000  === [ ScanLoader ] ========================================
160:239  0:000  - [04]: 'EFI'
160:239  0:000  - [05]: 'vmfarm-ssd-240'
160:239  0:000  - [06]: 'EFI'
160:239  0:000          AddLoaderEntry for Volume Name=EFI
160:239  0:000          skipped because entry is hidden
160:239  0:000  - [07]: 'Sierra'
160:239  0:000          AddLoaderEntry for Volume Name=Sierra
160:239  0:000      Check if volume Is Hibernated:
160:239  0:000      Check sleep image 'by signature':
160:239  0:000      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
160:239  0:000      using default sleep image name = \private\var\vm\sleepimage
160:239  0:000       sleepimage offset could not be acquired
160:239  0:000      hibernated: no - sign
160:240  0:000  - [08]: 'Recovery HD'
160:240  0:000          AddLoaderEntry for Volume Name=Recovery HD
160:240  0:000  - [09]: 'EFI'
160:240  0:000  - [10]: 'Samsung-500GB'
160:240  0:000  - [11]: 'EFI'
160:240  0:000  - [12]: 'VMFARMZ'
160:240  0:000  Scanning legacy ...
160:240  0:000  === [ AddCustomTool ] =====================================
160:240  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
160:240  0:000  Checking EFI partition Volume 4 for Clover
160:240  0:000  Checking EFI partition Volume 6 for Clover
160:240  0:000   Found Clover
160:240  0:000  EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored
160:240  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
160:308  0:068  === [ GetEfiBootDeviceFromNvram ] =========================
160:308  0:000   - found entry 0. 'Boot macOS from Sierra', Volume 'Sierra', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)\System\Library\CoreServices\boot.efii'
160:308  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
160:308  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
160:308  0:000  not run anime
163:954  3:645  not run anime
169:003  5:049  EDITED: -v dart=0 kext-dev-mode=1 -liluoff
171:737  2:734  ReinitSelfLib after theme change
171:737  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
171:737  0:000  === [ ScanVolumes ] =======================================
171:737  0:000  Found 13 volumes with blockIO
171:737  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
171:740  0:002  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
171:747  0:006  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
171:749  0:002          This is SelfVolume !!
171:749  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
171:749  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
171:750  0:000          Result of bootcode detection: bootable unknown (legacy)
171:750  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,959E644F-0C18-4C89-83D1-4D0F13BD8970,0x64028,0x1BE80460)
171:750  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
171:751  0:000          Result of bootcode detection: bootable unknown (legacy)
171:751  0:000          This is SelfVolume !!
171:751  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)
171:751  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,E0589854-A446-4574-A6EF-5BB51B592B3E,0x37D0D768,0x135F20)
171:752  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
171:752  0:000          Result of bootcode detection: bootable unknown (legacy)
171:752  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D1C306E8-66DD-4C1E-9EE9-59D38BAEA89E,0x64028,0x3A2E1FE0)
171:753  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
171:753  0:000          Result of bootcode detection: bootable unknown (legacy)
171:753  0:000  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,D893CF8D-690E-4027-B965-75A17FFF45E8,0x64028,0x74662D60)
171:754  0:000  theme inited
171:754  0:000  Chosen embedded theme
171:755  0:000  after NVRAM boot-args=-v dart=0 kext-dev-mode=1 -liluoff 
171:755  0:000  === [ ScanLoader ] ========================================
171:755  0:000  - [04]: 'EFI'
171:755  0:000  - [05]: 'vmfarm-ssd-240'
171:755  0:000  - [06]: 'EFI'
171:755  0:000          AddLoaderEntry for Volume Name=EFI
171:755  0:000          skipped because entry is hidden
171:755  0:000  - [07]: 'Sierra'
171:755  0:000          AddLoaderEntry for Volume Name=Sierra
171:755  0:000      Check if volume Is Hibernated:
171:755  0:000      Check sleep image 'by signature':
171:755  0:000      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
171:755  0:000      using default sleep image name = \private\var\vm\sleepimage
171:756  0:000       sleepimage offset could not be acquired
171:756  0:000      hibernated: no - sign
171:756  0:000  - [08]: 'Recovery HD'
171:756  0:000          AddLoaderEntry for Volume Name=Recovery HD
171:756  0:000  - [09]: 'EFI'
171:756  0:000  - [10]: 'Samsung-500GB'
171:756  0:000  - [11]: 'EFI'
171:756  0:000  - [12]: 'VMFARMZ'
171:756  0:000  Scanning legacy ...
171:756  0:000  === [ AddCustomTool ] =====================================
171:756  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
171:756  0:000  Checking EFI partition Volume 4 for Clover
171:756  0:000  Checking EFI partition Volume 6 for Clover
171:756  0:000   Found Clover
171:756  0:000  EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored
171:756  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
171:825  0:068  === [ GetEfiBootDeviceFromNvram ] =========================
171:825  0:000   - found entry 0. 'Boot macOS from Sierra', Volume 'Sierra', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)\System\Library\CoreServices\boot.efii'
171:825  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
171:825  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
171:825  0:000  not run anime
172:650  0:824  Boot option Boot0000 not found
172:650  0:000  === [ StartLoader ] =======================================
172:650  0:000  Finally: ExternalClock=25MHz BusSpeed=99770kHz CPUFreq=3991MHz PIS: hw.busfrequency=100000000Hz
172:650  0:000  Loading boot.efi  status=Success
172:716  0:066  GetOSVersion: 10.12.6 (16G1710)
172:716  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
172:716  0:000  Filtering KextPatches:
172:716  0:000   - [00]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 20 in XHCI kext (9-series)) :: BinPatch :: [OS: 10.12.6 | MatchOS: 10.11.x | MatchBuild: All] ==> not allowed
172:716  0:000   - [01]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 20 in XHCI kext (9-series)) :: BinPatch :: [OS: 10.12.6 | MatchOS: 10.12.x | MatchBuild: All] ==> allowed
172:716  0:000  Will not patch boot.efi
172:716  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
172:785  0:068  === [ PatchSmbios ] =======================================
172:785  0:000  insert table 9 for dev 0:0
172:785  0:000  insert table 9 for dev 0:1
172:785  0:000  insert table 9 for dev 0:0
172:785  0:000  insert table 9 for dev 0:0
172:786  0:000  Trusting SMBIOS...
172:786  0:000  Channels: 2
172:786  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
172:786  0:000   partNum=BLS8G3D1609DS1S00.
172:786  0:000  SMBIOS Type 17 Index = 0 => 0 0:
172:786  0:000  BANK 0 DIMM0 1600MHz 8192MB
172:786  0:000   partNum=BLS8G3D1609DS1S00.
172:786  0:000  SMBIOS Type 17 Index = 1 => 2 2:
172:786  0:000  BANK 1 DIMM0 1600MHz 8192MB
172:786  0:000   partNum=BLS8G3D1609DS1S00.
172:786  0:000  SMBIOS Type 17 Index = 2 => 1 1:
172:786  0:000  BANK 0 DIMM1 1600MHz 8192MB
172:786  0:000   partNum=BLS8G3D1609DS1S00.
172:786  0:000  SMBIOS Type 17 Index = 3 => 3 3:
172:786  0:000  BANK 1 DIMM1 1600MHz 8192MB
172:786  0:000  mTotalSystemMemory = 32768
172:786  0:000  NumberOfMemoryDevices = 4
172:786  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
172:786  0:000  Type20[1]->End = 0x17FFFFF, Type17[2] = 0x8000
172:786  0:000  Type20[2]->End = 0xFFFFFF, Type17[1] = 0xC000
172:786  0:000  Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x14000
172:786  0:000  Table 131 is present, CPUType=31
172:786  0:000  Change to: 705
172:786  0:000  === [ PatchACPI ] =========================================
172:786  0:000  Xsdt reallocation done
172:786  0:000  old FADT length=10C
172:786  0:000   SignatureFixup: 0x2 -> 0x0
172:787  0:001  Apply DsdtFixMask=0x00000000
172:787  0:000     drop _DSM mask=0x0000
172:787  0:000  === [ FixBiosDsdt ] =======================================
172:899  0:112    0 replacements
172:900  0:000  PreCleanup XSDT: count=12, length=132
172:900  0:000  PreCleanup XSDT, corrected XSDT: count=12, length=132
172:900  0:000  === [ ACPIDropTables ] ====================================
172:900  0:000  Drop tables from XSDT, SIGN=DMAR TableID=BDW  Length=184
172:900  0:000   Table[11]: DMAR  BDW   184 dropped
172:900  0:000  Drop tables from XSDT, SIGN=SSDT TableID=Cpu0Ist Length=1337
172:900  0:000   Table[4]: SSDT  Cpu0Ist  1337 dropped
172:900  0:000    0 replacements
172:900  0:000    0 replacements
172:900  0:000  Found OperationRegion(PNVS, SystemMemory, C85E0F18, ...)
172:900  0:000    0 replacements
172:900  0:000    0 replacements
172:900  0:000  Found OperationRegion(SANV, SystemMemory, C85DDE18, ...)
172:900  0:000  Found OperationRegion(CCDC, SystemMemory, 80000000, ...)
172:900  0:000  === [ ACPIPatchedAML ] ====================================
172:900  0:000  Unsorted
172:900  0:000  Inserting SSDT-UIAC.aml from EFI\CLOVER\ACPI\patched: size=660 ... Success
172:900  0:000  Inserting SSDT.AML from EFI\CLOVER\ACPI\patched: size=2614 ... Success
172:901  0:001  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
172:901  0:000  Maximum control=0x28
172:901  0:000  Turbo control=0x2C
172:901  0:000  P-States: min 0x8, max 0x2C
172:901  0:000  SSDT with CPU P-States and plugin-type generated successfully
172:901  0:000  SSDT with CPU C-States generated successfully
172:901  0:000  Cleanup XSDT: count=16, length=164
172:901  0:000  corrected XSDT count=14, length=148
172:901  0:000  === [ RestSetup macOS ] ===================================
172:901  0:000  EdidDiscovered size=128
172:901  0:000  --- Discovered EDID Table size:128
172:901  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  04  72
172:901  0:000  010  |  E3  03  8F  D3  60  63  24  1A  01  03
172:901  0:000  020  |  80  35  1E  78  CA  39  B0  A5  54  50
172:901  0:000  030  |  9E  26  11  50  54  BF  EF  80  71  4F
172:901  0:000  040  |  81  40  81  80  81  C0  81  00  95  00
172:901  0:000  050  |  B3  00  D1  C0  02  3A  80  18  71  38
172:901  0:000  060  |  2D  40  58  2C  45  00  13  2B  21  00
172:901  0:000  070  |  00  1E  00  00  00  FD  00  37  4C  1E
172:901  0:000  080  |  50  11  00  0A  20  20  20  20  20  20
172:901  0:000  090  |  00  00  00  FC  00  4B  32  34  32  48
172:901  0:000  100  |  4C  0A  20  20  20  20  20  20  00  00
172:901  0:000  110  |  00  FF  00  54  30  46  53  53  30  30
172:901  0:000  120  |  31  38  35  30  33  0A  00  28
172:901  0:000  NVidia GFX injection not set
172:901  0:000  Intel GFX injection not set
172:902  0:000  stringlength = 1878
172:902  0:000  CurrentMode: Width=1920 Height=1080
172:902  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BC134298
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BC134298
172:902  0:000  Use origin smbios table type 1 guid.
172:902  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
172:902  0:000  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_GPUSensors.kext (v.1800)
172:907  0:004  Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.3.4)
172:930  0:022  Extra kext: EFI\CLOVER\kexts\Other\SMCSuperIO.kext (v.1.0.2)
172:932  0:002  Extra kext: EFI\CLOVER\kexts\Other\SMCProcessor.kext (v.1.0.2)
172:935  0:002  Extra kext: EFI\CLOVER\kexts\Other\SMCLightSensor.kext (v.1)
172:937  0:002  Extra kext: EFI\CLOVER\kexts\Other\VirtualSMC.kext (v.1.0.2)
172:941  0:004  Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.3.1)
172:945  0:003  Extra kext: EFI\CLOVER\kexts\Other\WhateverGreen.kext (v.1.2.6)
172:956  0:011  Extra kext: EFI\CLOVER\kexts\Other\USBInjectAll.kext (v.0.7.1)
173:002  0:045  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_CPUSensors.kext (v.1800)
173:006  0:003  Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL81xx.kext (v.0.0.90)
173:017  0:010  Extra kext: EFI\CLOVER\kexts\Other\NullCPUPowerManagement.kext (v.1.0.0d2)
173:022  0:005  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1800)
173:029  0:006  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
173:029  0:000  Custom boot screen not used because entry has unset use graphics

 

 

Your Preboot.Log: there is virtualsmc and fakesmc.  If you want to use VirtualSMC, remove FakeSMC. I think you must also remove his plugin FakeSMC*

Edited by Matgen84

Share this post


Link to post
Share on other sites
5 hours ago, Matgen84 said:

Your Preboot.Log: there is virtualsmc and fakesmc.  If you want to use VirtualSMC, remove FakeSMC. I think you must also remove his plugin FakeSMC*

 

SUCCESS!! :yoji:

 

I kept VirtualSMC and deleted fakesmc + fakesmc* from EFI

then in singleusermode removed fakesmc.kext from S/L/E

rebuilt/clear cache and it booted normally using lilu v 1.3.1

 

Thank you @Matgen84 @Badruzeus @ellaosx @AkimoA @Andrey1970 and @vit9696 for your valuable time and assistance in getting this sorted

 

Edited by barleyjuice
VirtualSMC

Share this post


Link to post
Share on other sites

I think at this point tht i can run an entire hackintosh just with lilu and it's plugins and i will be only missing the ethernet driver

Share this post


Link to post
Share on other sites

Hi @vit9696,

#Question: What does the last logs line mean?

MacBook-Pro:~ badruzeus$ cat /private/var/log/system.log | grep Lilu
Jan 18 16:53:38 localhost kernel[0]: calling mpo_policy_init for Lilu
Jan 18 16:53:38 localhost kernel[0]: Security policy loaded: Lilu Kernel Extension 1.3.2 (Lilu)
Jan 18 16:53:38 localhost kernel[0]: Lilu:    mach @ decompression disallowed due to low out size 2563

Lilu && PlugIns that I'm currently using:

15:523  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
15:788  0:029  Extra kext: EFI\CLOVER\kexts\Other\RTCMemoryFixup.kext (v.1)
15:902  0:083  Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.3.5)
17:498  0:082  Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.3.2)
17:532  0:034  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
17:532  0:000  Extra kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext (v.1.0.2)
17:715  0:182    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCSuperIO.kext (v.1.0.2)
17:759  0:044    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCProcessor.kext (v.1.0.2)
17:793  0:034    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCLightSensor.kext (v.1)
17:823  0:030    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCBatteryManager.kext (v.1)
......  .....  ...

..and RTCMemoryFixup seems not loaded from $ kextstat output. I'm running it under 10.11.6 from github release version; can't build it with Xcode 8.2.1 bcoz incompatible project.

 

Thanks a lot.

Share this post


Link to post
Share on other sites

@Badruzeus, sorry for the late reply. I have just fixed RTCMemoryFixup project in master. It should work on 10.11.6 from now on, and we will include the fix in the following release.

 

As for the logs, first two are from XNU TrustedBSD API, which signalise about Lilu loading. We can do little about them.

As for the third one, it means that one of your prelinked kernels is either unsupported or corrupted. If everything else does work, you can ignore this message. Lilu could start off a non-prelinked kernel anyway.

Share this post


Link to post
Share on other sites
1 hour ago, vit9696 said:

@Badruzeus, sorry for the late reply. I have just fixed RTCMemoryFixup project in master. It should work on 10.11.6 from now on, and we will include the fix in the following release.

Great, built succeeded with Xcode 8.2.1 and well loaded under 10.11.6.

 

Another #Question:

On my case, I've applied Rehabman's system_RTC DSDT patch.

Do they have same purpose related to "RTC", or "RTCMemoryFixup" is another case?

Thanks again.

Screenshot 23.png

Edited by Badruzeus

Share this post


Link to post
Share on other sites

I believe Rehabman's RTC patch (similarly to all RTC-related patches in Clover) actually break RTC but limiting its available memory to 128 bytes (instead of 256). This makes AppleRTC.kext stop writing to RTC memory. RTCMemoryFixup allows you to avoid writing to certain areas, which in turn conflict with your BIOS, so I believe it is cleaner.

Share this post


Link to post
Share on other sites
9 minutes ago, vit9696 said:

I believe Rehabman's RTC patch (similarly to all RTC-related patches in Clover) actually break RTC but limiting its available memory to 128 bytes (instead of 256). This makes AppleRTC.kext stop writing to RTC memory. RTCMemoryFixup allows you to avoid writing to certain areas, which in turn conflict with your BIOS, so I believe it is cleaner.

OK thanks.. and I don't get yet what cause this rtc related logs:

// 10.11.6

MacBook-Pro:~ badruzeus$ cat /private/var/log/system.log | grep rtc
Jan 26 05:12:35 localhost kernel[0]: Lilu:     rtc @ rtc read failure 1 bytes from 180 E00002C2
Jan 26 05:12:35 localhost kernel[0]: VirtualSMC:   efend @ no extra rtc memory is present for key erase
Jan 26 05:13:11 MacBook-Pro com.apple.xpc.launchd[1] (com.apple.rtcreportingd): The UserName key is not supported for non-System services.

// 10.14.4 Beta 1

MacBook-Pro:~ badruzeus$ cat /private/var/log/system.log | grep rtc

Jan 23 10:09:43 MacBook-Pro rtcreportingd[389]: objc[389]: Class UpdateAndReportServices is implemented in both
/System/Library/PrivateFrameworks/RTCReporting.framework/Versions/A/RTCReporting (0x1041f8250)
and /usr/libexec/rtcreportingd (0x103cdf870). One of the two will be used. Which one is undefined.
Edited by Badruzeus

Share this post


Link to post
Share on other sites

If you reread what I said, "actually break RTC but limiting its available memory to 128 bytes (instead of 256). ", in particular, you would see why it says failed to read the memory. Last message is unrelated to bootloaders or kexts.

Share this post


Link to post
Share on other sites
8 minutes ago, vit9696 said:

If you reread what I said, "actually break RTC but limiting its available memory to 128 bytes (instead of 256). ", in particular, you would see why it says failed to read the memory. Last message is unrelated to bootloaders or kexts.

Oh, I see.. yeah, it's complicated (RTC on my mach).

so I think need to clean my DSDT from those RTC patch then use only RTCMemoryFixup.

Thank you.

Share this post


Link to post
Share on other sites
On 1/26/2019 at 11:16 PM, vit9696 said:

I believe Rehabman's RTC patch (similarly to all RTC-related patches in Clover) actually break RTC but limiting its available memory to 128 bytes (instead of 256). This makes AppleRTC.kext stop writing to RTC memory. RTCMemoryFixup allows you to avoid writing to certain areas, which in turn conflict with your BIOS, so I believe it is cleaner.

Any specific thread thread/topic for this?? How can we track a problematic offset?? 
And what offset should i exclude?? Sorry for bad english
image.png.238f0687ef4bbf21940dee846373e543.png

Share this post


Link to post
Share on other sites

Somebody needs to write this manual. Finding problematic offset is manual via (sleep or hibernation depending on the machine)/wake/reboot → check BIOS preferences reset cycle. You could always use https://en.wikipedia.org/wiki/Binary_search_algorithm to reduce the number of reboots. @lvs1974 can comment a bit more if absolutely necessary.

Share this post


Link to post
Share on other sites
14 hours ago, Andres ZeroCross said:

Any specific thread thread/topic for this?? How can we track a problematic offset?? 
And what offset should i exclude?? Sorry for bad english
image.png.238f0687ef4bbf21940dee846373e543.png

You can start with rtcfx_exclude=10-FF for example. Reboot and repeat sleep/wake/shutdown cycles (probably enter into hibernate). 

If cmos reset issue is not observed any more, you can try rtcfx_exclude=80-FF, the idea is to detect a bank (0D-7F or 80-FF), in the worst case writing into both can cause issues.

After you can try to use binary search to reveal an address/range of addresses as small as possible.

Share this post


Link to post
Share on other sites

I want to upgrade from 10.14.3 to 10.14.4 DB2. When boot [install mojave], it stuck at verbose screen.

Then I reboot back into 10.14.3, i received a panic info can be report to Apple, I check the detail info from Console.app:

Thu Feb  7 21:38:38 2019

*** Panic Report ***
panic(cpu 4 caller 0xffffff80102dbe8d): Kernel trap at 0xffffff7f93f2581c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f93f94c7a, CR3: 0x00000004a44fb00d, CR4: 0x00000000003626e0
RAX: 0x0000000000000002, RBX: 0xffffff82005fb5bc, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff82005fb580, RBP: 0xffffff82005fb580, RSI: 0xffffff80453b0680, RDI: 0x0000000000000002
R8:  0xffffff82005fb5bc, R9:  0x0000000000000780, R10: 0x0000000000000438, R11: 0x0000000000000780
R12: 0xffffff81c04815ac, R13: 0xffffff80453b0680, R14: 0xffffff80435de500, R15: 0xffffff82005fb608
RFL: 0x0000000000010202, RIP: 0xffffff7f93f2581c, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f93f94c7a, Error code: 0x0000000000000003, Fault CPU: 0x4, PL: 0, VF: 2

Backtrace (CPU 4), Frame : Return Address
0xffffff82005fb050 : 0xffffff80101ae9dd mach_kernel : _handle_debugger_trap + 0x47d
0xffffff82005fb0a0 : 0xffffff80102ea355 mach_kernel : _kdp_i386_trap + 0x155
0xffffff82005fb0e0 : 0xffffff80102dbc6a mach_kernel : _kernel_trap + 0x50a
0xffffff82005fb150 : 0xffffff801015bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff82005fb170 : 0xffffff80101ae3f7 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff82005fb290 : 0xffffff80101ae243 mach_kernel : _panic + 0x63
0xffffff82005fb300 : 0xffffff80102dbe8d mach_kernel : _kernel_trap + 0x72d
0xffffff82005fb470 : 0xffffff801015bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff82005fb490 : 0xffffff7f93f2581c as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc3c
0xffffff82005fb580 : 0xffffff7f93f60bff as.vit9696.WhateverGreen : _orgVaddrPresubmitTrampoline + 0x4fa
0xffffff82005fb5a0 : 0xffffff7f945832ac com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff82005fb5f0 : 0xffffff7f945823dc com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff82005fb960 : 0xffffff7f9455ca99 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff82005fb9c0 : 0xffffff7f9442b565 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff82005fba00 : 0xffffff7f9442b43a com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff82005fba90 : 0xffffff8010884d28 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff82005fbae0 : 0xffffff7f94431438 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff82005fbb30 : 0xffffff801088e1d2 mach_kernel : _is_io_connect_method + 0x212
0xffffff82005fbc70 : 0xffffff80102962a6 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff82005fbd80 : 0xffffff80101b421c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff82005fbdd0 : 0xffffff801018ec41 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff82005fbe50 : 0xffffff80101a34ae mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff82005fbef0 : 0xffffff80102c3007 mach_kernel : _mach_call_munger64 + 0x257
0xffffff82005fbfa0 : 0xffffff801015c476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f93f10000->0xffffff7f93f31fff
         as.vit9696.WhateverGreen(1.2.6)[073AC103-5807-3374-8D23-F98A0975D391]@0xffffff7f93f60000->0xffffff7f93fc2fff
            dependency: as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f93f10000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
         com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f94410000->0xffffff7f9445afff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[FD4E977D-A29B-3939-B2E6-64B473279EC2]@0xffffff7f94544000->0xffffff7f94764fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f90ae2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.8)[D5E9849D-22E0-380F-B560-A115614960D5]@0xffffff7f94495000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f90adb000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.12)[505935DB-B28B-3C9E-8A5C-3D38D70055CD]@0xffffff7f9453a000
            dependency: com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f94410000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E184e

Kernel version:
Darwin Kernel Version 18.5.0: Thu Jan 31 01:17:54 PST 2019; root:xnu-4903.250.319~62/RELEASE_X86_64
Kernel UUID: 65EC7A82-220E-3FD8-91E2-5AECA8B2FEF1
Kernel slide:     0x000000000fe00000
Kernel text base: 0xffffff8010000000
__HIB  text base: 0xffffff800ff00000
System model name: MacBookPro13,3 (Mac-A5C67F76ED83108C)

System uptime in nanoseconds: 52322842445
last loaded kext at 51683146336: com.apple.driver.AppleGraphicsDevicePolicy	3.30.12 (addr 0xffffff7f94bf1000, size 81920)
loaded kexts:
org.rehabman.voodoo.driver.PS2Mouse	1.9.1
org.rehabman.voodoo.driver.PS2Trackpad	1.9.1
org.rehabman.voodoo.driver.PS2Keyboard	1.9.1
com.no-one.BrcmPatchRAM2	2.2.10
com.no-one.BrcmFirmwareStore	2.2.10
org.rehabman.driver.FakePCIID	1.3.14
com.alexandred.VoodooI2C	2.1.4
org.coolstar.VoodooGPIO	1.1
org.rehabman.voodoo.driver.PS2Controller	1.9.1
as.vit9696.SMCProcessor	1.0.2
as.vit9696.AppleALC	1.3.5
as.lvs1974.AirportBrcmFixup	1.1.9
com.XPS.VerbStub	1.0.3
as.lvs1974.BT4LEContiunityFixup	1.1.2
as.vit9696.WhateverGreen	1.2.6
org.vanilla.driver.CPUFriend	1.1.5
ru.usrsse2.SMCBatteryManager	1
com.alexandred.VoodooI2CServices	1
ru.usrsse2.SMCLightSensor	1
as.vit9696.VirtualSMC	1.0.2
xyz.racermaster.NoTouchID	1.0.1
as.vit9696.Lilu	1.3.3
com.apple.driver.AppleGraphicsDevicePolicy	3.30.12
com.apple.driver.pmtelemetry	1
com.apple.iokit.IOUserEthernet	1.0.1
com.apple.iokit.IOBluetoothSerialManager	6.0.11d3
com.apple.driver.X86PlatformShim	1.0.0
com.apple.driver.AGPM	110.25.2
com.apple.driver.ApplePlatformEnabler	2.7.0d0
com.apple.Dont_Steal_Mac_OS_X	7.0.0
com.apple.driver.AppleHDAHardwareConfigDriver	282.51
com.apple.driver.AppleHV	1
com.apple.driver.AGDCBacklightControl	3.30.12
com.apple.driver.AppleHDA	282.51
com.apple.driver.ACPI_SMC_PlatformPlugin	1.0.0
com.apple.driver.AppleMCCSControl	1.5.6
com.apple.driver.AppleOSXWatchdog	1
com.apple.driver.AppleIntelPCHPMC	2.0.1
com.apple.driver.AppleLPC	3.1
com.apple.driver.AppleSMCLMU	212
com.apple.driver.AppleIntelSlowAdaptiveClocking	4.0.0
com.apple.driver.AppleFIVRDriver	4.1.0
com.apple.driver.AppleIntelSKLGraphicsFramebuffer	12.0.8
com.apple.driver.AppleBacklight	170.12.11
com.apple.nke.webcontentfilter	5
com.apple.filesystems.ntfs	3.13
com.apple.private.KextAudit	1.0
com.apple.driver.DiskImages.ReadWriteDiskImage	493.0.0
com.apple.driver.DiskImages.SparseDiskImage	493.0.0
com.apple.driver.DiskImages.UDIFDiskImage	493.0.0
com.apple.driver.DiskImages.HTTPBackingStore	493.0.0
com.apple.driver.DiskImages.FileBackingStore	493.0.0
com.apple.driver.DiskImages.RAMBackingStore	493.0.0
com.apple.driver.AppleFileSystemDriver	3.0.1
com.apple.filesystems.hfs.kext	407.200.4
com.apple.BootCache	40
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless	1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib	1.0.0
com.apple.AppleSystemPolicy	1.0
com.apple.filesystems.apfs	945.250.122
com.apple.driver.AirPort.BrcmNIC	1400.1.1
com.apple.driver.AppleAHCIPort	329.200.2
com.apple.driver.AppleSmartBatteryManager	161.0.0
com.apple.driver.AppleRTC	2.0
com.apple.driver.AppleACPIButtons	6.1
com.apple.driver.AppleACPIEC	6.1
com.apple.driver.AppleHPET	1.8
com.apple.driver.AppleSMBIOS	2.1
com.apple.driver.AppleAPIC	1.7
com.apple.nke.applicationfirewall	190
com.apple.security.TMSafetyNet	8
com.apple.driver.AppleGraphicsControl	3.30.12
com.apple.iokit.IOSerialFamily	11
com.apple.iokit.IOAVBFamily	740.1
com.apple.plugin.IOgPTPPlugin	740.2
com.apple.iokit.IOEthernetAVBController	1.1.0
com.apple.iokit.IOSkywalkFamily	1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport	6.0.11d3
com.apple.iokit.IOBluetoothHostControllerUSBTransport	6.0.11d3
com.apple.iokit.IOBluetoothHostControllerTransport	6.0.11d3
com.apple.driver.DspFuncLib	282.51
com.apple.kext.OSvKernDSPLib	528
com.apple.driver.IOPlatformPluginLegacy	1.0.0
com.apple.AppleGPUWrangler	3.30.12
com.apple.driver.AppleSMBusController	1.0.18d1
com.apple.driver.AppleUSBAudio	315.6
com.apple.driver.AppleHDAController	282.51
com.apple.iokit.IOHDAFamily	282.51
com.apple.iokit.IOAudioFamily	206.5
com.apple.vecLib.kext	1.2.0
com.apple.driver.AppleSMBusPCI	1.0.14d1
com.apple.driver.X86PlatformPlugin	1.0.0
com.apple.driver.IOPlatformPluginFamily	6.0.0d8
com.apple.iokit.IOSlowAdaptiveClockingFamily	1.0.0
com.apple.AppleGraphicsDeviceControl	3.30.12
com.apple.iokit.IOAcceleratorFamily2	404.8
com.apple.iokit.IOSurface	255.4.2
com.apple.driver.AppleBacklightExpert	1.1.0
com.apple.iokit.IONDRVSupport	530.51
com.apple.iokit.IOGraphicsFamily	530.59
com.apple.driver.usb.IOUSBHostHIDDevice	1.2
com.apple.driver.DiskImages.KernelBacked	493.0.0
com.apple.driver.usb.cdc	5.0.0
com.apple.driver.usb.networking	5.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice	1.2
com.apple.filesystems.hfs.encodings.kext	1
com.apple.driver.AppleXsanScheme	3
com.apple.iokit.IOAHCIBlockStorage	301.250.5
com.apple.driver.AppleUSBHostMergeProperties	1.2
com.apple.driver.usb.AppleUSBHostPacketFilter	1.0
com.apple.iokit.IOUSBFamily	900.4.2
com.apple.iokit.IONVMeFamily	2.1.0
com.apple.iokit.IO80211Family	1200.12

I try to add WEG argument [ngfxsubmit=0] then boot into installation again, it still stuck at the verbose mode.

Then I reboot back into 10.14.3, i received another panic info from Console.app:

Anonymous UUID:       BD838D05-146F-2A90-40D5-F5C700EC7110

Thu Feb  7 22:13:24 2019

*** Panic Report ***
panic(cpu 6 caller 0xffffff800dcdbe8d): Kernel trap at 0xffffff7f9192581c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f91994c7a, CR3: 0x00000004a430e024, CR4: 0x00000000003626e0
RAX: 0xffffff7f91925818, RBX: 0xffffff81be057000, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff81fe6f3560, RBP: 0xffffff81fe6f3560, RSI: 0xffffff8042f3e500, RDI: 0x0000000000000002
R8:  0xffffff81fe6f35bc, R9:  0x000000007fffffff, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0xffffff81be0595ac, R13: 0xffffff8042f3e500, R14: 0xffffff80410e8400, R15: 0xffffff81fe6f3608
RFL: 0x0000000000010286, RIP: 0xffffff7f9192581c, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f91994c7a, Error code: 0x0000000000000003, Fault CPU: 0x6, PL: 0, VF: 2

Backtrace (CPU 6), Frame : Return Address
0xffffff81fe6f3030 : 0xffffff800dbae9dd mach_kernel : _handle_debugger_trap + 0x47d
0xffffff81fe6f3080 : 0xffffff800dcea355 mach_kernel : _kdp_i386_trap + 0x155
0xffffff81fe6f30c0 : 0xffffff800dcdbc6a mach_kernel : _kernel_trap + 0x50a
0xffffff81fe6f3130 : 0xffffff800db5bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff81fe6f3150 : 0xffffff800dbae3f7 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff81fe6f3270 : 0xffffff800dbae243 mach_kernel : _panic + 0x63
0xffffff81fe6f32e0 : 0xffffff800dcdbe8d mach_kernel : _kernel_trap + 0x72d
0xffffff81fe6f3450 : 0xffffff800db5bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff81fe6f3470 : 0xffffff7f9192581c as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc3c
0xffffff81fe6f3560 : 0xffffff7f91964682 as.vit9696.WhateverGreen : __ZN4IGFX20wrapComputeLaneCountEPvS0_jiPi + 0x92
0xffffff81fe6f35a0 : 0xffffff7f91f9b2ac com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff81fe6f35f0 : 0xffffff7f91f9a3dc com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff81fe6f3960 : 0xffffff7f91f74a99 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff81fe6f39c0 : 0xffffff7f91e43565 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff81fe6f3a00 : 0xffffff7f91e4343a com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff81fe6f3a90 : 0xffffff800e284d28 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff81fe6f3ae0 : 0xffffff7f91e49438 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff81fe6f3b30 : 0xffffff800e28e1d2 mach_kernel : _is_io_connect_method + 0x212
0xffffff81fe6f3c70 : 0xffffff800dc962a6 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff81fe6f3d80 : 0xffffff800dbb421c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff81fe6f3dd0 : 0xffffff800db8ec41 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff81fe6f3e50 : 0xffffff800dba34ae mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff81fe6f3ef0 : 0xffffff800dcc3007 mach_kernel : _mach_call_munger64 + 0x257
0xffffff81fe6f3fa0 : 0xffffff800db5c476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f91910000->0xffffff7f91931fff
         as.vit9696.WhateverGreen(1.2.6)[76B394AE-05C5-3ED3-8489-4EC73630F74E]@0xffffff7f91960000->0xffffff7f919dafff
            dependency: as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f91910000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
         com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f91e28000->0xffffff7f91e72fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[FD4E977D-A29B-3939-B2E6-64B473279EC2]@0xffffff7f91f5c000->0xffffff7f9217cfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f8e4e2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.8)[D5E9849D-22E0-380F-B560-A115614960D5]@0xffffff7f91ead000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f8e4db000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.12)[505935DB-B28B-3C9E-8A5C-3D38D70055CD]@0xffffff7f91f52000
            dependency: com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f91e28000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 ngfxsubmit=0 -wegdbg -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E184e

Can someone help me?

Edited by darkhandz
more accuracy describing

Share this post


Link to post
Share on other sites
18 minutes ago, darkhandz said:

I want to upgrade from 10.14.3 to 10.14.4 DB2. When boot [install mojave], it stuck at verbose screen.

Then I reboot back into 10.14.3, i received a panic info below.


Thu Feb  7 21:38:38 2019

*** Panic Report ***
panic(cpu 4 caller 0xffffff80102dbe8d): Kernel trap at 0xffffff7f93f2581c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f93f94c7a, CR3: 0x00000004a44fb00d, CR4: 0x00000000003626e0
RAX: 0x0000000000000002, RBX: 0xffffff82005fb5bc, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff82005fb580, RBP: 0xffffff82005fb580, RSI: 0xffffff80453b0680, RDI: 0x0000000000000002
R8:  0xffffff82005fb5bc, R9:  0x0000000000000780, R10: 0x0000000000000438, R11: 0x0000000000000780
R12: 0xffffff81c04815ac, R13: 0xffffff80453b0680, R14: 0xffffff80435de500, R15: 0xffffff82005fb608
RFL: 0x0000000000010202, RIP: 0xffffff7f93f2581c, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f93f94c7a, Error code: 0x0000000000000003, Fault CPU: 0x4, PL: 0, VF: 2

Backtrace (CPU 4), Frame : Return Address
0xffffff82005fb050 : 0xffffff80101ae9dd mach_kernel : _handle_debugger_trap + 0x47d
0xffffff82005fb0a0 : 0xffffff80102ea355 mach_kernel : _kdp_i386_trap + 0x155
0xffffff82005fb0e0 : 0xffffff80102dbc6a mach_kernel : _kernel_trap + 0x50a
0xffffff82005fb150 : 0xffffff801015bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff82005fb170 : 0xffffff80101ae3f7 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff82005fb290 : 0xffffff80101ae243 mach_kernel : _panic + 0x63
0xffffff82005fb300 : 0xffffff80102dbe8d mach_kernel : _kernel_trap + 0x72d
0xffffff82005fb470 : 0xffffff801015bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff82005fb490 : 0xffffff7f93f2581c as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc3c
0xffffff82005fb580 : 0xffffff7f93f60bff as.vit9696.WhateverGreen : _orgVaddrPresubmitTrampoline + 0x4fa
0xffffff82005fb5a0 : 0xffffff7f945832ac com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff82005fb5f0 : 0xffffff7f945823dc com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff82005fb960 : 0xffffff7f9455ca99 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff82005fb9c0 : 0xffffff7f9442b565 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff82005fba00 : 0xffffff7f9442b43a com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff82005fba90 : 0xffffff8010884d28 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff82005fbae0 : 0xffffff7f94431438 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff82005fbb30 : 0xffffff801088e1d2 mach_kernel : _is_io_connect_method + 0x212
0xffffff82005fbc70 : 0xffffff80102962a6 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff82005fbd80 : 0xffffff80101b421c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff82005fbdd0 : 0xffffff801018ec41 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff82005fbe50 : 0xffffff80101a34ae mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff82005fbef0 : 0xffffff80102c3007 mach_kernel : _mach_call_munger64 + 0x257
0xffffff82005fbfa0 : 0xffffff801015c476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f93f10000->0xffffff7f93f31fff
         as.vit9696.WhateverGreen(1.2.6)[073AC103-5807-3374-8D23-F98A0975D391]@0xffffff7f93f60000->0xffffff7f93fc2fff
            dependency: as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f93f10000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
         com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f94410000->0xffffff7f9445afff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[FD4E977D-A29B-3939-B2E6-64B473279EC2]@0xffffff7f94544000->0xffffff7f94764fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f90ae2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.8)[D5E9849D-22E0-380F-B560-A115614960D5]@0xffffff7f94495000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f90adb000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.12)[505935DB-B28B-3C9E-8A5C-3D38D70055CD]@0xffffff7f9453a000
            dependency: com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f94410000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E184e

Kernel version:
Darwin Kernel Version 18.5.0: Thu Jan 31 01:17:54 PST 2019; root:xnu-4903.250.319~62/RELEASE_X86_64
Kernel UUID: 65EC7A82-220E-3FD8-91E2-5AECA8B2FEF1
Kernel slide:     0x000000000fe00000
Kernel text base: 0xffffff8010000000
__HIB  text base: 0xffffff800ff00000
System model name: MacBookPro13,3 (Mac-A5C67F76ED83108C)

System uptime in nanoseconds: 52322842445
last loaded kext at 51683146336: com.apple.driver.AppleGraphicsDevicePolicy	3.30.12 (addr 0xffffff7f94bf1000, size 81920)
loaded kexts:
org.rehabman.voodoo.driver.PS2Mouse	1.9.1
org.rehabman.voodoo.driver.PS2Trackpad	1.9.1
org.rehabman.voodoo.driver.PS2Keyboard	1.9.1
com.no-one.BrcmPatchRAM2	2.2.10
com.no-one.BrcmFirmwareStore	2.2.10
org.rehabman.driver.FakePCIID	1.3.14
com.alexandred.VoodooI2C	2.1.4
org.coolstar.VoodooGPIO	1.1
org.rehabman.voodoo.driver.PS2Controller	1.9.1
as.vit9696.SMCProcessor	1.0.2
as.vit9696.AppleALC	1.3.5
as.lvs1974.AirportBrcmFixup	1.1.9
com.XPS.VerbStub	1.0.3
as.lvs1974.BT4LEContiunityFixup	1.1.2
as.vit9696.WhateverGreen	1.2.6
org.vanilla.driver.CPUFriend	1.1.5
ru.usrsse2.SMCBatteryManager	1
com.alexandred.VoodooI2CServices	1
ru.usrsse2.SMCLightSensor	1
as.vit9696.VirtualSMC	1.0.2
xyz.racermaster.NoTouchID	1.0.1
as.vit9696.Lilu	1.3.3
com.apple.driver.AppleGraphicsDevicePolicy	3.30.12
com.apple.driver.pmtelemetry	1
com.apple.iokit.IOUserEthernet	1.0.1
com.apple.iokit.IOBluetoothSerialManager	6.0.11d3
com.apple.driver.X86PlatformShim	1.0.0
com.apple.driver.AGPM	110.25.2
com.apple.driver.ApplePlatformEnabler	2.7.0d0
com.apple.Dont_Steal_Mac_OS_X	7.0.0
com.apple.driver.AppleHDAHardwareConfigDriver	282.51
com.apple.driver.AppleHV	1
com.apple.driver.AGDCBacklightControl	3.30.12
com.apple.driver.AppleHDA	282.51
com.apple.driver.ACPI_SMC_PlatformPlugin	1.0.0
com.apple.driver.AppleMCCSControl	1.5.6
com.apple.driver.AppleOSXWatchdog	1
com.apple.driver.AppleIntelPCHPMC	2.0.1
com.apple.driver.AppleLPC	3.1
com.apple.driver.AppleSMCLMU	212
com.apple.driver.AppleIntelSlowAdaptiveClocking	4.0.0
com.apple.driver.AppleFIVRDriver	4.1.0
com.apple.driver.AppleIntelSKLGraphicsFramebuffer	12.0.8
com.apple.driver.AppleBacklight	170.12.11
com.apple.nke.webcontentfilter	5
com.apple.filesystems.ntfs	3.13
com.apple.private.KextAudit	1.0
com.apple.driver.DiskImages.ReadWriteDiskImage	493.0.0
com.apple.driver.DiskImages.SparseDiskImage	493.0.0
com.apple.driver.DiskImages.UDIFDiskImage	493.0.0
com.apple.driver.DiskImages.HTTPBackingStore	493.0.0
com.apple.driver.DiskImages.FileBackingStore	493.0.0
com.apple.driver.DiskImages.RAMBackingStore	493.0.0
com.apple.driver.AppleFileSystemDriver	3.0.1
com.apple.filesystems.hfs.kext	407.200.4
com.apple.BootCache	40
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless	1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib	1.0.0
com.apple.AppleSystemPolicy	1.0
com.apple.filesystems.apfs	945.250.122
com.apple.driver.AirPort.BrcmNIC	1400.1.1
com.apple.driver.AppleAHCIPort	329.200.2
com.apple.driver.AppleSmartBatteryManager	161.0.0
com.apple.driver.AppleRTC	2.0
com.apple.driver.AppleACPIButtons	6.1
com.apple.driver.AppleACPIEC	6.1
com.apple.driver.AppleHPET	1.8
com.apple.driver.AppleSMBIOS	2.1
com.apple.driver.AppleAPIC	1.7
com.apple.nke.applicationfirewall	190
com.apple.security.TMSafetyNet	8
com.apple.driver.AppleGraphicsControl	3.30.12
com.apple.iokit.IOSerialFamily	11
com.apple.iokit.IOAVBFamily	740.1
com.apple.plugin.IOgPTPPlugin	740.2
com.apple.iokit.IOEthernetAVBController	1.1.0
com.apple.iokit.IOSkywalkFamily	1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport	6.0.11d3
com.apple.iokit.IOBluetoothHostControllerUSBTransport	6.0.11d3
com.apple.iokit.IOBluetoothHostControllerTransport	6.0.11d3
com.apple.driver.DspFuncLib	282.51
com.apple.kext.OSvKernDSPLib	528
com.apple.driver.IOPlatformPluginLegacy	1.0.0
com.apple.AppleGPUWrangler	3.30.12
com.apple.driver.AppleSMBusController	1.0.18d1
com.apple.driver.AppleUSBAudio	315.6
com.apple.driver.AppleHDAController	282.51
com.apple.iokit.IOHDAFamily	282.51
com.apple.iokit.IOAudioFamily	206.5
com.apple.vecLib.kext	1.2.0
com.apple.driver.AppleSMBusPCI	1.0.14d1
com.apple.driver.X86PlatformPlugin	1.0.0
com.apple.driver.IOPlatformPluginFamily	6.0.0d8
com.apple.iokit.IOSlowAdaptiveClockingFamily	1.0.0
com.apple.AppleGraphicsDeviceControl	3.30.12
com.apple.iokit.IOAcceleratorFamily2	404.8
com.apple.iokit.IOSurface	255.4.2
com.apple.driver.AppleBacklightExpert	1.1.0
com.apple.iokit.IONDRVSupport	530.51
com.apple.iokit.IOGraphicsFamily	530.59
com.apple.driver.usb.IOUSBHostHIDDevice	1.2
com.apple.driver.DiskImages.KernelBacked	493.0.0
com.apple.driver.usb.cdc	5.0.0
com.apple.driver.usb.networking	5.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice	1.2
com.apple.filesystems.hfs.encodings.kext	1
com.apple.driver.AppleXsanScheme	3
com.apple.iokit.IOAHCIBlockStorage	301.250.5
com.apple.driver.AppleUSBHostMergeProperties	1.2
com.apple.driver.usb.AppleUSBHostPacketFilter	1.0
com.apple.iokit.IOUSBFamily	900.4.2
com.apple.iokit.IONVMeFamily	2.1.0
com.apple.iokit.IO80211Family	1200.12

I try to add WEG argument [ngfxsubmit=0] then boot into installation again, it still stuck at the verbose mode.

Then I reboot back into 10.14.3, i received another panic info:


Anonymous UUID:       BD838D05-146F-2A90-40D5-F5C700EC7110

Thu Feb  7 22:13:24 2019

*** Panic Report ***
panic(cpu 6 caller 0xffffff800dcdbe8d): Kernel trap at 0xffffff7f9192581c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f91994c7a, CR3: 0x00000004a430e024, CR4: 0x00000000003626e0
RAX: 0xffffff7f91925818, RBX: 0xffffff81be057000, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff81fe6f3560, RBP: 0xffffff81fe6f3560, RSI: 0xffffff8042f3e500, RDI: 0x0000000000000002
R8:  0xffffff81fe6f35bc, R9:  0x000000007fffffff, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0xffffff81be0595ac, R13: 0xffffff8042f3e500, R14: 0xffffff80410e8400, R15: 0xffffff81fe6f3608
RFL: 0x0000000000010286, RIP: 0xffffff7f9192581c, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f91994c7a, Error code: 0x0000000000000003, Fault CPU: 0x6, PL: 0, VF: 2

Backtrace (CPU 6), Frame : Return Address
0xffffff81fe6f3030 : 0xffffff800dbae9dd mach_kernel : _handle_debugger_trap + 0x47d
0xffffff81fe6f3080 : 0xffffff800dcea355 mach_kernel : _kdp_i386_trap + 0x155
0xffffff81fe6f30c0 : 0xffffff800dcdbc6a mach_kernel : _kernel_trap + 0x50a
0xffffff81fe6f3130 : 0xffffff800db5bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff81fe6f3150 : 0xffffff800dbae3f7 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff81fe6f3270 : 0xffffff800dbae243 mach_kernel : _panic + 0x63
0xffffff81fe6f32e0 : 0xffffff800dcdbe8d mach_kernel : _kernel_trap + 0x72d
0xffffff81fe6f3450 : 0xffffff800db5bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff81fe6f3470 : 0xffffff7f9192581c as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc3c
0xffffff81fe6f3560 : 0xffffff7f91964682 as.vit9696.WhateverGreen : __ZN4IGFX20wrapComputeLaneCountEPvS0_jiPi + 0x92
0xffffff81fe6f35a0 : 0xffffff7f91f9b2ac com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff81fe6f35f0 : 0xffffff7f91f9a3dc com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff81fe6f3960 : 0xffffff7f91f74a99 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff81fe6f39c0 : 0xffffff7f91e43565 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff81fe6f3a00 : 0xffffff7f91e4343a com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff81fe6f3a90 : 0xffffff800e284d28 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff81fe6f3ae0 : 0xffffff7f91e49438 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff81fe6f3b30 : 0xffffff800e28e1d2 mach_kernel : _is_io_connect_method + 0x212
0xffffff81fe6f3c70 : 0xffffff800dc962a6 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff81fe6f3d80 : 0xffffff800dbb421c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff81fe6f3dd0 : 0xffffff800db8ec41 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff81fe6f3e50 : 0xffffff800dba34ae mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff81fe6f3ef0 : 0xffffff800dcc3007 mach_kernel : _mach_call_munger64 + 0x257
0xffffff81fe6f3fa0 : 0xffffff800db5c476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f91910000->0xffffff7f91931fff
         as.vit9696.WhateverGreen(1.2.6)[76B394AE-05C5-3ED3-8489-4EC73630F74E]@0xffffff7f91960000->0xffffff7f919dafff
            dependency: as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f91910000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
         com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f91e28000->0xffffff7f91e72fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[FD4E977D-A29B-3939-B2E6-64B473279EC2]@0xffffff7f91f5c000->0xffffff7f9217cfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f8e4e2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.8)[D5E9849D-22E0-380F-B560-A115614960D5]@0xffffff7f91ead000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f8e4db000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.12)[505935DB-B28B-3C9E-8A5C-3D38D70055CD]@0xffffff7f91f52000
            dependency: com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f91e28000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 ngfxsubmit=0 -wegdbg -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E184e

Can someone help me?

Which clover version did you use?

Share this post


Link to post
Share on other sites
12 minutes ago, Andres ZeroCross said:

Which clover version did you use?

I tried r4862 and r4871, it's same.

Share this post


Link to post
Share on other sites

Please upload the kexts (binaries) you had your panic with or point to the github binaries.

Include Lili, WhateverGreen, and AppleIntelSKLGraphicsFramebuffer.

Edited by vit9696

Share this post


Link to post
Share on other sites
3 minutes ago, vit9696 said:

Please upload the kexts (binaries) you had your panic with or point to the github binaries.

Actually, I tried Lilu v1.3.3(Release) + WhateverGreen v1.2.6(Release), download from https://github.com/acidanthera/Lilu/releases and https://github.com/acidanthera/WhateverGreen/releases . 

 

And at Feb 3, I tried Lilu v1.3.1(Release) + WhateverGreen v1.2.6(Release), link is same as above. The panic log:

nonymous UUID:       BD838D05-146F-2A90-40D5-F5C700EC7110

Sun Feb  3 23:47:34 2019

*** Panic Report ***
panic(cpu 0 caller 0xffffff80124db25d): Kernel trap at 0xffffff7f96198830, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f96207852, CR3: 0x00000004a4087022, CR4: 0x00000000003626e0
RAX: 0x0000000000000002, RBX: 0xffffff82041f35bc, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff82041f3580, RBP: 0xffffff82041f3580, RSI: 0xffffff8047640b80, RDI: 0x0000000000000002
R8:  0xffffff82041f35bc, R9:  0x0000000000000780, R10: 0x0000000000000438, R11: 0x0000000000000780
R12: 0xffffff81c279b5ac, R13: 0xffffff8047640b80, R14: 0xffffff804590f900, R15: 0xffffff82041f3608
RFL: 0x0000000000010202, RIP: 0xffffff7f96198830, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f96207852, Error code: 0x0000000000000003, Fault CPU: 0x0, PL: 0, VF: 2

Backtrace (CPU 0), Frame : Return Address
0xffffff82041f3050 : 0xffffff80123ad8ed mach_kernel : _handle_debugger_trap + 0x47d
0xffffff82041f30a0 : 0xffffff80124e9725 mach_kernel : _kdp_i386_trap + 0x155
0xffffff82041f30e0 : 0xffffff80124db03a mach_kernel : _kernel_trap + 0x50a
0xffffff82041f3150 : 0xffffff801235ac90 mach_kernel : _return_from_trap + 0xe0
0xffffff82041f3170 : 0xffffff80123ad307 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff82041f3290 : 0xffffff80123ad153 mach_kernel : _panic + 0x63
0xffffff82041f3300 : 0xffffff80124db25d mach_kernel : _kernel_trap + 0x72d
0xffffff82041f3470 : 0xffffff801235ac90 mach_kernel : _return_from_trap + 0xe0
0xffffff82041f3490 : 0xffffff7f96198830 as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc50
0xffffff82041f3580 : 0xffffff7f961d3bff as.vit9696.WhateverGreen : _orgVaddrPresubmitTrampoline + 0x4fa
0xffffff82041f35a0 : 0xffffff7f96801620 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff82041f35f0 : 0xffffff7f9680074e com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff82041f3960 : 0xffffff7f967dade9 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff82041f39c0 : 0xffffff7f9668656d com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff82041f3a00 : 0xffffff7f96686442 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff82041f3a90 : 0xffffff8012a848d8 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff82041f3ae0 : 0xffffff7f9668c440 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff82041f3b30 : 0xffffff8012a8dd82 mach_kernel : _is_io_connect_method + 0x212
0xffffff82041f3c70 : 0xffffff8012495676 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff82041f3d80 : 0xffffff80123b300c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff82041f3dd0 : 0xffffff801238dc31 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff82041f3e50 : 0xffffff80123a248e mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff82041f3ef0 : 0xffffff80124c23d7 mach_kernel : _mach_call_munger64 + 0x257
0xffffff82041f3fa0 : 0xffffff801235b476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.1)[2BA44B2C-289E-39B7-A92B-C28291D5FC26]@0xffffff7f96184000->0xffffff7f961a4fff
         as.vit9696.WhateverGreen(1.2.6)[073AC103-5807-3374-8D23-F98A0975D391]@0xffffff7f961d3000->0xffffff7f96235fff
            dependency: as.vit9696.Lilu(1.3.1)[2BA44B2C-289E-39B7-A92B-C28291D5FC26]@0xffffff7f96184000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
         com.apple.iokit.IOGraphicsFamily(530.57)[08EBBAC5-C38A-3385-B97E-C88801380641]@0xffffff7f9666b000->0xffffff7f966b5fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[2AB4ED11-7DCF-3FBB-8336-75D46BA7E731]@0xffffff7f967c3000->0xffffff7f969d5fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f92ce2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.7)[D30D18A1-A83D-342A-9023-0C841F6F2441]@0xffffff7f96714000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f92cdb000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.10)[9402031D-3E23-3B49-9AB0-E50B150AEB15]@0xffffff7f967b9000
            dependency: com.apple.iokit.IOGraphicsFamily(530.57)[08EBBAC5-C38A-3385-B97E-C88801380641]@0xffffff7f9666b000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E174f

Kernel version:
Darwin Kernel Version 18.5.0: Wed Jan 16 00:04:52 PST 2019; root:xnu-4903.250.305~71/RELEASE_X86_64
Kernel UUID: 1C50C713-B653-354E-9293-86C6D3CF61AA
Kernel slide:     0x0000000012000000
Kernel text base: 0xffffff8012200000
__HIB  text base: 0xffffff8012100000
System model name: MacBookPro13,3 (Mac-A5C67F76ED83108C)

 

Share this post


Link to post
Share on other sites
6 minutes ago, darkhandz said:

Actually, I tried Lilu v1.3.3(Release) + WhateverGreen v1.2.6(Release), download from https://github.com/acidanthera/Lilu/releases and https://github.com/acidanthera/WhateverGreen/releases . 

 

And at Feb 3, I tried Lilu v1.3.1(Release) + WhateverGreen v1.2.6(Release), link is same as above. The panic log:


nonymous UUID:       BD838D05-146F-2A90-40D5-F5C700EC7110

Sun Feb  3 23:47:34 2019

*** Panic Report ***
panic(cpu 0 caller 0xffffff80124db25d): Kernel trap at 0xffffff7f96198830, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f96207852, CR3: 0x00000004a4087022, CR4: 0x00000000003626e0
RAX: 0x0000000000000002, RBX: 0xffffff82041f35bc, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff82041f3580, RBP: 0xffffff82041f3580, RSI: 0xffffff8047640b80, RDI: 0x0000000000000002
R8:  0xffffff82041f35bc, R9:  0x0000000000000780, R10: 0x0000000000000438, R11: 0x0000000000000780
R12: 0xffffff81c279b5ac, R13: 0xffffff8047640b80, R14: 0xffffff804590f900, R15: 0xffffff82041f3608
RFL: 0x0000000000010202, RIP: 0xffffff7f96198830, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f96207852, Error code: 0x0000000000000003, Fault CPU: 0x0, PL: 0, VF: 2

Backtrace (CPU 0), Frame : Return Address
0xffffff82041f3050 : 0xffffff80123ad8ed mach_kernel : _handle_debugger_trap + 0x47d
0xffffff82041f30a0 : 0xffffff80124e9725 mach_kernel : _kdp_i386_trap + 0x155
0xffffff82041f30e0 : 0xffffff80124db03a mach_kernel : _kernel_trap + 0x50a
0xffffff82041f3150 : 0xffffff801235ac90 mach_kernel : _return_from_trap + 0xe0
0xffffff82041f3170 : 0xffffff80123ad307 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff82041f3290 : 0xffffff80123ad153 mach_kernel : _panic + 0x63
0xffffff82041f3300 : 0xffffff80124db25d mach_kernel : _kernel_trap + 0x72d
0xffffff82041f3470 : 0xffffff801235ac90 mach_kernel : _return_from_trap + 0xe0
0xffffff82041f3490 : 0xffffff7f96198830 as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc50
0xffffff82041f3580 : 0xffffff7f961d3bff as.vit9696.WhateverGreen : _orgVaddrPresubmitTrampoline + 0x4fa
0xffffff82041f35a0 : 0xffffff7f96801620 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff82041f35f0 : 0xffffff7f9680074e com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff82041f3960 : 0xffffff7f967dade9 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff82041f39c0 : 0xffffff7f9668656d com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff82041f3a00 : 0xffffff7f96686442 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff82041f3a90 : 0xffffff8012a848d8 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff82041f3ae0 : 0xffffff7f9668c440 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff82041f3b30 : 0xffffff8012a8dd82 mach_kernel : _is_io_connect_method + 0x212
0xffffff82041f3c70 : 0xffffff8012495676 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff82041f3d80 : 0xffffff80123b300c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff82041f3dd0 : 0xffffff801238dc31 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff82041f3e50 : 0xffffff80123a248e mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff82041f3ef0 : 0xffffff80124c23d7 mach_kernel : _mach_call_munger64 + 0x257
0xffffff82041f3fa0 : 0xffffff801235b476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.1)[2BA44B2C-289E-39B7-A92B-C28291D5FC26]@0xffffff7f96184000->0xffffff7f961a4fff
         as.vit9696.WhateverGreen(1.2.6)[073AC103-5807-3374-8D23-F98A0975D391]@0xffffff7f961d3000->0xffffff7f96235fff
            dependency: as.vit9696.Lilu(1.3.1)[2BA44B2C-289E-39B7-A92B-C28291D5FC26]@0xffffff7f96184000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
         com.apple.iokit.IOGraphicsFamily(530.57)[08EBBAC5-C38A-3385-B97E-C88801380641]@0xffffff7f9666b000->0xffffff7f966b5fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[2AB4ED11-7DCF-3FBB-8336-75D46BA7E731]@0xffffff7f967c3000->0xffffff7f969d5fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f92ce2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.7)[D30D18A1-A83D-342A-9023-0C841F6F2441]@0xffffff7f96714000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f92cdb000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.10)[9402031D-3E23-3B49-9AB0-E50B150AEB15]@0xffffff7f967b9000
            dependency: com.apple.iokit.IOGraphicsFamily(530.57)[08EBBAC5-C38A-3385-B97E-C88801380641]@0xffffff7f9666b000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E174f

Kernel version:
Darwin Kernel Version 18.5.0: Wed Jan 16 00:04:52 PST 2019; root:xnu-4903.250.305~71/RELEASE_X86_64
Kernel UUID: 1C50C713-B653-354E-9293-86C6D3CF61AA
Kernel slide:     0x0000000012000000
Kernel text base: 0xffffff8012200000
__HIB  text base: 0xffffff8012100000
System model name: MacBookPro13,3 (Mac-A5C67F76ED83108C)

 

WHat's your notebook model and specifications?? PC or Notebook???

Share this post


Link to post
Share on other sites
2 minutes ago, Andres ZeroCross said:

WHat's your notebook model and specifications?? PC or Notebook???

Laptop:	DELL XPS15 9550
BIOS:	v1.9.0
CPU:	Intel i7 6700HQ
RAM:	16G DDR4 2400
SSD:	SM961 256G NVMe SSD
Graphic: HD530, 1920x1080

 

3 minutes ago, vit9696 said:

Redo the panic with the latest debug binaries please.

OK, please wait some minutes.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By poles89
      Hi guys,
       
      Though native graphics acceleration is supported on i3 from Mojave, I'm not able to manage to get it.
       
      This is my system configuration :
      Motherboard:  Asus Prime H370-Plus
      CPU: i3-8100 (UHD 630)
      OS: Mojave 10.14.2
       
      I'm trying every possible way to get full graphics acceleration. But whatever I try it shows only 4MB video memory or leads to Kernal Panic. Here are some ways I have tried so far:
       
      Prerequisites: 
      Installed latest Lilu+WEG on L/E. set DMVT prealloc to 64MB on bios.  
      Option 1: IntelGFX-> 0x3E928086, ig-platform-id-> 0x3E9B0007, Inject Intel = true. Output:  Kernal Panic
      Option 2: Blank IntelGFX, blank ig-platform-id, Inject Intel = false Output:  Kernal Panic
      Option 3:  IntelGFX-> 0x3E928086, ig-platform-id-> 0x5912000, Inject Intel = true.  Output: Booted Successfully but no graphics acceleration.
                     I knew that ig-platform-id-> 0x5912000 doesn't work in mojave and its works only for high sierra but I set this because with this ig-platform-id I can boot. Another way I can boot it by
                     setting invalid Fake IntelGFX value like 0x12345678.
      Option 4:  Downloaded Intel FBPatcher & followed this guide. But as I opened the app, its shows like this:
       
                     
                    
                     It clearly indicates it neither can detect Intel CPU generation nor GPU memory (currently shows 0 MB). I changed to different PlatformId from the drop down but no improvement. Anyway I
                     applied a patch with SMBIOS ->Macmini8,1 by someione's recommendation . I attached a config file (config_fbpather.plist) for this. Output:  Kernal Panic
       
      I have tried the upper mentioned methods with SMBIOS like  iMac14,2 / iMac18[1,2,3]  and Macmini8,1. I'm using HDMI port for display output. Now I don't know whats wrong with theses methods but maybe someone can help me to figure out this problem. I have also attached those config.plist files.
       
      Thanks in advance.
       
      config_fakeid_0x3E928086.plist
      config_fbpatcher.plist
      config_fbpatcher_with_device_id.plist
      config_platform-id_0x59120000.plist
    • By headkaze
      Framebuffer patching in Mojave
      Binary patching framebuffers using KextsToPatch in Clover is no longer a viable method in Mojave for Skylake and above. Now you need to use Lilu + WhateverGreen.
       
      Not just for Mojave
      This method of framebuffer patching is not only required for Mojave we recommend it for all previous and future releases of macOS.
       
      Coffee Lake Users
      Please note that the new WhateverGreen will not work with fake Kaby Lake platform-id's. You will need to have either macOS 10.14 Beta 4 (18A336e) or macOS High Sierra 10.13.6 (17G2112). The latter is a special build only available to MacBookPro15,1 or MacBookPro15,2 board id's. You can create a macOS High Sierra 10.13.6 (17G2112) installer by running installinstallmacos.py. (Update: vit9696 added back ability to fake Kaby Lake platform-id's)
       
      Lilu + WhateverGreen
      WhateverGreen is going to replace all the other video patching plugins for Lilu (it currently has merged WhateverGreen, IntelGraphicsFixup, NvidiaGraphicsFixup, Shiki and CoreDisplayFixup). Others will likely follow (such as AppleALC, HibernationFixup and IntelGraphicsDVMTFixup). This is aiming to be the all-in-one solution for video.
       
      Preliminary
      1. Remove:
      - FakePCIID_Intel_HD_Graphics
      - IntelGraphicsFixup
      - NvidiaGraphicsFixup
      - CoreDisplayFixup
      - Shiki
      2. Turn off all graphics injections in Clover:
      - config.plist/Graphics/Inject/ATI=NO
      - config.plist/Graphics/Inject/Intel=NO
      - config.plist/Graphics/Inject/NVidia=NO
      - config.plist/Graphics/ig-platform-id=
      - config.plist/Devices/FakeID/IntelGFX=

      3. Disable DSDT Clover fixes:
      - AddHDMI
      - FixDisplay
      - FixIntelGfx
      - AddIMEI
      4. Disable UseIntelHDMI
      5. Remove boot argument: -disablegfxfirmware
      6. Remove any IGPU and HDMI entries from:
      - config.plist/Devices/Arbitrary
      - config.plist/Devices/Properties
      - config.plist/Devices/AddProperties
      7. Remove any IGPU and HDMI related SSDT and DSDT from:
      - CLOVER/ACPI/patched
      8. Renaming GFX0 -> IGPU
      - WhateverGreen will do this automatically (see caveat below)
      - Be aware that WhateverGreen does not rename all instances of GFX0 -> IGPU but should be okay in most cases
      - You may need to include Clover GFX0 -> IGPU rename for other kexts or ACPI patching that require it
       
      Compile Lilu + WhateverGreen
      Download WhateverGreen. Make sure you place the debug version of Lilu into the root of WhateverGreen before you compile. Install Lilu and WhateverGreen kext's into the usual place. Compile WhateverGreen as debug if you want to view debug output.
       
      Having trouble compiling?
      If you're having trouble compiling you can download the official release binaries or download my (unsupported) build_lilu.sh shell script and run it in a folder to download and build Lilu + WhateverGreen using Xcode automatically. I recommend you try the debug versions first (place them into Clover's EFI/Clover/kexts/Other folder).
       
      Get the device path of your IGPU:
      Download and use the gfxutil tool like so:
      $ ./gfxutil -f IGPU DevicePath = PciRoot(0x0)/Pci(0x2,0x0) ig-platform-id
      For the AAPL,ig-platform-id (AAPL,snb-platform-id for Sandy Bridge) entry Clover requires this value to be in Data format so you need to reverse the bytes. So if you want your platform-id to be 0x3EA50009 first reverse the bytes (0900A53E) then use Xcode's plist editor to add the values to Clover's config.plist.

       
      What ig-platform-id should I use for my system?
      You should choose one that is the closest match to your system. I recommend you do some research on this before choosing one. See post #2 for available options. More info can be found here.
       
      You can determine the generation of your CPU by the first digit after the hyphen.
      Examples:
      - Intel(R) Core(TM) i5-2760QM (Gen 2)
      - Intel(R) Core(TM) i7-5257U CPU @ 2.70GHz (Gen 5)
      - Intel(R) Core(TM) m3-6Y30 (Gen 6)
      - Intel(R) Core(TM) i5-8350U (Gen 8)
       
      Spoofing Intel CPU Gen
      If you need to spoof a different Intel CPU generation you can use the lilucpu=N boot flag. The N refers to the following Intel generations:
      4    SandyBridge 5    IvyBridge 6    Haswell 7    Broadwell 8    Skylake 9    KabyLake 10   CoffeeLake To spoof a CPU you will need to set a valid device-id in your GPU entry in Devices/Properties for the appropriate Intel generation.
       
      Eg. Spoofing Skylake (lilucpu=8 boot flag with device-id=0x16190000), Kaby Lake (lilucpu=9 boot flag with device-id=0x12590000).
       
      Here are some recommended frames:
       
      Gen 2: Sandy Bridge (Intel HD Graphics 2000/3000)
      - S/L/E/AppleIntelSNBGraphicsFB.kext
      - Support started with OS X 10.7.x and ended with macOS 10.13.6
      - Metal support is not available
      - device-id: 0x0102 0x0106 0x010A 0x0112 0x0116 0x0122 0x0126
      - AAPL,snb-platform-id (desktop): 0x00030010 (default)
      - AAPL,snb-platform-id (laptop): 0x00010000 (default)
       
      Gen 3: Ivy Bridge (Intel HD Graphics 2500/4000)
      - S/L/E/AppleIntelFramebufferCapri.kext
      - Support started with OS X 10.8.x
      - device-id: 0x0152 0x0156 0x0162 0x0166
      - AAPL,ig-platform-id (desktop): 0x0166000A (default), 0x01620005
      - AAPL,ig-platform-id (laptop): 0x01660003 (default), 0x01660009, 0x01660004
       
      Gen 4: Haswell (Intel HD Graphics 4200-5200)
      - S/L/E/AppleIntelFramebufferAzul.kext
      - Support started with OS X 10.9.x
      - device-id: 0x0D26 0x0A26 0x0A2E 0x0D22 0x0412
      - AAPL,ig-platform-id (desktop): 0x0D220003 (default)
      - AAPL,ig-platform-id (laptop): 0x0A160000 (default), 0x0A260005 (recommended)
       
      Gen 5: Broadwell (Intel HD Graphics 5300-6300)
      - S/L/E/AppleIntelBDWGraphicsFramebuffer.kext
      - Support started with OS X 10.10.2
      - device-id: 0x0BD1 0x0BD2 0x0BD3 0x1606 0x160E 0x1616 0x161E 0x1626 0x1622 0x1612 0x162B
      - AAPL,ig-platform-id (desktop): 0x16220007 (default)
      - AAPL,ig-platform-id (laptop): 0x16260006 (default)
       
      Gen 6: Skylake (Intel HD Graphics 510-580)
      - S/L/E/AppleIntelSKLGraphicsFramebuffer.kext
      - Support started with OS X 10.11.4
      - device-id: 0x1916 0x191E 0x1926 0x1927 0x1912 0x1932 0x1902 0x1917 0x193B 0x191B
      - AAPL,ig-platform-id (desktop): 0x19120000 (default)
      - AAPL,ig-platform-id (laptop): 0x19160000 (default)
       
      Gen 7: Kaby Lake (Intel HD Graphics 610-650)
      - S/L/E/AppleIntelKBLGraphicsFramebuffer.kext
      - Support started with macOS 10.12.6
      - device-id: 0x5912 0x5916 0x591B 0x591C 0x591E 0x5926 0x5927 0x5923 0x87C0
      - AAPL,ig-platform-id (desktop): 0x59160000 (default)
      - AAPL,ig-platform-id (laptop): 0x591B0000 (default)
       
      Gen 8: Coffee Lake (Intel UHD Graphics 630)
      - S/L/E/AppleIntelCFLGraphicsFramebuffer.kext
      - Support started with macOS 10.13.6 (17G2112) / 10.14 beta 4 (18A336e)
      - device-id: 0x3E9B 0x3EA5 0x3E92 0x3E91
      - AAPL,ig-platform-id (desktop): 0x3EA50000 (default), 0x3E9B0007 (recommended)
      - AAPL,ig-platform-id (laptop): 0x3EA50009 (default)
       
      Framebuffer Patching
      WhateverGreen does most of the work automatically for you and in most cases you do not need any extra Framebuffer Patching. At the minimum though you should choose an ig-platform-id suitable for your system and place it in config.plist/Devices/Properties like this:

      Here are some reasons why you might need extra Framebuffer Patching:
      - Setting DVMT for those who can't set it above 32 MB in BIOS (framebuffer-stolenmem / framebuffer-fbmem)
      - Setting higher VRAM for 4K users who experience graphical glitches (framebuffer-unifiedmem)
      - Disabling eGPU (disable-external-gpu)
      - Enable pixel clock patch for 4K support (enable-hdmi20)
      - Disabling connectors to enable sleep (framebuffer-pipecount / framebuffer-portcount / framebuffer-conX-type=-1)
      - Removing CNConnectorAlwaysConnected flag for eDP laptop screens on < 10.13.6 (framebuffer-con0-flags=0x00000090)
      - Changing connector types to match your systems ports (framebuffer-conX-type)
       
      Framebuffer Patching Types
      We have three different types of patches:
       
      1. Arbitrary (Recommended)
      framebuffer-patch-enable (required to enable below) framebuffer-framebufferid (optional; defaults to current platform-id) (all below are optional) framebuffer-mobile framebuffer-pipecount framebuffer-portcount framebuffer-memorycount framebuffer-stolenmem framebuffer-fbmem framebuffer-unifiedmem framebuffer-cursormem (Haswell only) framebuffer-camellia framebuffer-flags framebuffer-conX-enable (required to enable below) framebuffer-conX-index framebuffer-conX-busid framebuffer-conX-pipe framebuffer-conX-type framebuffer-conX-flags 2. All Data
      framebuffer-conX-enable (required to enable below) framebuffer-conX-alldata 3. Find / Replace
      framebuffer-patchX-enable (required to enable below) framebuffer-patchX-framebufferid (optional; defaults to current platform-id) framebuffer-patchX-find framebuffer-patchX-replace framebuffer-patchX-count (optional; defaults to 1) You should place your patches in config.plist/Devices/Properties in Clover config.plist.
       
      Here are some example patches:
      - 32MB BIOS, 19MB stolen (framebuffer) 9MB fbmem (cursor) 2048MB unifiedmem (vram)

       
      - Pipe / Port Count 3 to 2
      - Connector 1 DP to HDMI
      - Connector 2 Disable

       
      Here is an example of the All Data method:

       
      Here is an example of the Find / Replace method:

       
      Framebuffer Dumps
      There are two ways to dump your framebuffer data (both require WhateverGreen + Lilu debug versions):
       
      1. Using -igfxdump boot flag to dump IGPU framebuffer kext to /AppleIntelFramebuffer_X_Y (root of your boot drive)
       
      There are several ways of reading this dump:
      - Using 010 Editor along with the IntelFramebuffer.bt template
      - Using Hackintool File->Open menu
       
      2. Using -igfxfbdump boot flag to dump native and patched framebuffer table to ioreg at IOService:/IOResources/WhateverGreen
       
      There are several ways of reading this dump:
      - Using dump_platformlist.sh shell script
      - Using Hackintool File->Import->IOReg Dump menu
       
      3. Using Hackintool Framebuffer->macOS 10.14 menu
       
      Debug Output
      To get debug output from Lilu use the -liludbgall liludump=60 boot flags. You will need to compile Lilu and WhateverGreen as debug for both of these flags to work. Log files should be located at /var/log/Lilu_*.
       
      To view debug paste the following into Terminal (weglog.txt will output to your home directory):
      log show --predicate 'process == "kernel" AND (eventMessage CONTAINS "WhateverGreen" OR eventMessage CONTAINS "Lilu")' --style syslog --source --last boot >weglog.txt Getting Help

      To help the users of this forum diagnose issues with your configuration please generate a Lilu debug log and then run gen_debug.sh to generate a folder of debug files you can attach to a forum post requesting help.

      Credits
      - vit9696 and lvs1974 for WhateverGreen (Full Credits) and Lilu (Full Credits)
      - Andrey1970 for his guide on applelife.ru
      - RehabMan for all data patching method, ioreg framebuffer dump and other contributions
       


    • By EduardoMenezes
      Good evening, friends of InsanelyMac.
      I have an Acer Aspire E5-571 notebook with Intel processor and Intel Graphics 5500 hd graphics card. When I was using the Sierra, the video card was recognized without problems. Now that I'm using Mojave I can not get the acceleration to work.
      I've been researching something about having to use Lilu.kext and whatevergreen.kext but I do not have enough knowledge to solve this problem.
      I need the help of someone who can explain to me how to solve this acceleration problem. I'm sure it will be of great value to other users like me.
      Thank you very much.

    • By yehia2amer
      I want to patch AppleHDA but I cannot find any post talking about ALC3220, I Tried AppleALC (ALC280 - layout-id 11), and AppleHDA Patcher v1.9  (ALC280 - layout-id 5) with no luck.
      I Also Tried VodooHDA but it is very buggy an unstable !
       
      So Now Please find my Codec details below
      ------
      Linux codec_dump.txt 
       
      Codec: Realtek ALC3220 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0280 Subsystem Id: 0x102805d4 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=5, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker+LO Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC3220 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x3d 0x3d] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC3220 Analog", type="Audio", device=0 Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x27 0x27] Converter: stream=1, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Rear Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Rear Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x03 0x0b Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00] Connection: 2 0x02 0x03 Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x4008c000: [N/A] Line Out at Ext N/A Conn = DIN, Color = UNKNOWN DefAssociation = 0x0, Sequence = 0x0 Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c 0x0d* Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00010014: OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Pincap 0x00000010: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x0f Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Rear Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a13040: [Jack] Mic at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=04, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Front Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19030: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=03, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Line Out Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01014020: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x40400001: [N/A] SPDIF Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=107 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo Connection: 8 0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12 0x13 Node 0x23 [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x18* 0x19 0x1a 0x1b 0x1d 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono  
      Jarvis report:
      Hardware info: - ATI R6xx HDMI (1002:aa01) - Controller 1002:aa30 (sub-ven:174b:aa30) - Driver: VoodooHDA SSDT-4.aml succesfully extracted! DSDT.aml succesfully extracted! SSDT.aml succesfully extracted! SSDT-1.aml succesfully extracted! SSDT-3.aml succesfully extracted! SSDT-2.aml succesfully extracted! Found "Device (HDEF)" in DSDT.aml Found property "layout-id" in DSDT.aml Found 1 occurennces of "layout-id" in ioreg, not sure what's will be for HDEF.. Found unsupported "layout-id = 11" in ioreg, will not work using Mirone's patches!!! No "Device (HDAU)" was found inside your ACPI tables. That is normal w/o a PCI Video card or w/o an HDMI connector on it! AppleHDA Patcher.app only supports (if patched by Mirone): layout-id 2 for laptop's, layout-id 5 for Desktop's with 3 connectors (pink, green and blue), layout-id 7 for Desktop's with 5/6 connectors (gray, black, orange, pink, green and blue), layout-id 9 for Desktop's with 5/6 connectors (gray, black, orange, pink, green, blue, CodecAddress:2) aDummyHDA.kext works only is /System/Library/Extensions. Laptop's may be need the provided ACPI Patch such system_IRQ.txt to be functional. HDAEnabler.kext maybe usefull if you don't want to edit your ACPI table or the Clover's config, or the org.Chameleon.Boot.plist. CodecCommander.kext is usefull in the case you have no sound after waking from sleep. Generated kexts should be installed in a proper way, repairing its permissions and rebuilding the cache: dragging kexts into Pandora's Box.app window will help you to do that!  
      Chipset Name: Intel Corporation C600/X79 series chipset High Definition Audio Controller (rev 06)
      Codec Name: Realtek ALC3220
      Linux Codec Dump : codec_dump.txt
      codec_dump.txt.svg
      Patched DSDT: DSDT.aml
       
       
      Thanks
       
    • By maiconjs
      I have a receiver with 7.1 channels, in which I transmit the formats Dolby Digital and DTS without problems by Windows, through the HDMI output of HD4000. On that same Laptop, I have the Hackintosh, with the High Sierra 10.13.6, and with audio enabled using AppleALC, but in the audio preferences, I can not enable the Digital audio format. Also did not find players like Mirillis SplashPro (which I have used in Windows) with the option of HDMI output Bitstream. Is it possible to enable this digital output on Hackintosh?
×