Jump to content
About Just Joined group Read more... ×
vit9696

Lilu — kext and process patcher

371 posts in this topic

Recommended Posts

5 minutes ago, barleyjuice said:

This is what it shows.

Also please note this is using -liluoff as im unable to boot without that flag.

Boot into Desktop then run:

sudo rm -f /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache && sudo touch /System/Library/Extensions && sudo kextcache -u / && sudo update_dyld_shared_cache -force
// Reboot
Spoiler

Seems not related to Lilu, but logs said that you're using 2 different SMC's kext at a same time: FakeSMC + VirtualSMC:


.......  .....  ...
172:902  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
172:902  0:000  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_GPUSensors.kext (v.1800)
172:930  0:022  Extra kext: EFI\CLOVER\kexts\Other\SMCSuperIO.kext (v.1.0.2)
172:932  0:002  Extra kext: EFI\CLOVER\kexts\Other\SMCProcessor.kext (v.1.0.2)
172:935  0:002  Extra kext: EFI\CLOVER\kexts\Other\SMCLightSensor.kext (v.1)
172:937  0:002  Extra kext: EFI\CLOVER\kexts\Other\VirtualSMC.kext (v.1.0.2)
173:002  0:045  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_CPUSensors.kext (v.1800)
173:022  0:005  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1800)
173:029  0:006  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
.......  .....  ...

Not sure where this idea came from but I guess, choose 1 of them and don't use both altogether.

 

Share this post


Link to post
Share on other sites
Advertisement

Hi Badruzeus

 

I did run 

sudo rm -f /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache && sudo touch /System/Library/Extensions && sudo kextcache -u / && sudo update_dyld_shared_cache -force

it ran without any errors or failures..

then restarted but getting the same error pointing to lilu ( 1.1) version.  :unsure:

 

IMG_4632.JPG

Share this post


Link to post
Share on other sites
23 minutes ago, barleyjuice said:

It ran without any errors or failures..

then restarted but getting the same error pointing to lilu ( 1.1) version.  :unsure:

Yeah, weird.. where did you previously get Lilu 1.1 and it was installed using which method?

Share this post


Link to post
Share on other sites
17 minutes ago, Badruzeus said:

Yeah, weird.. where did you previously get Lilu 1.1 and it was installed using which method?

 

I honestly never heard of lilu until 1 week ago when my system started crashing.

I used vanilla sierra/clover on h97m-d3h to install over 1.5 years ago. ( i think it was the VioletDragons instructions)

It was running like a dream until last week when it wouldnt boot.

 

I cant remember updating anything meaningful ( to avoid situations like this) especially OS so not sure what happened or what i did wrong.

 

Once i was pointed towards lilu.kext as being the culprit i downloaded the most recent one and copied the 1.3.1 to "Other" folder in EFI 

I should note there was no lilu.kext in the "other" directory in EFI until i copied/installed 1.3.1 ( this is probably the mysterious kext that cant be found)

 

Really odd that i cant find V1.1 anywhere and have tried clearing/rebuilding multiple times with no success.

 

 

Share this post


Link to post
Share on other sites
2 hours ago, barleyjuice said:

Hi

Thanks i think i did the log correctly.

This is what it shows.

Also please note this is using -liluoff as im unable to boot without that flag.

 


0:100  0:100  MemLog inited, TSC freq: 3990761294
0:100  0:000  CPU was calibrated with ACPI PM Timer
0:100  0:000  
0:100  0:000  Now is 14.1.2019,  4:34:16 (GMT)
0:100  0:000  Starting Clover revision: 4844 on American Megatrends EFI
0:100  0:000  Build with: [Args: -nb -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.13.6 | XCODE: 10.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000) @BC134518
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = 1315
0:100  0:000  SmbiosTable.Type17->SerialNumber = 524903325
0:100  0:000  SmbiosTable.Type17->PartNumber = BLS8G3D1609DS1S001.
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = 1315
0:100  0:000  SmbiosTable.Type17->SerialNumber = 524900617
0:100  0:000  SmbiosTable.Type17->PartNumber = BLS8G3D1609DS1S00.
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = 1315
0:100  0:000  SmbiosTable.Type17->SerialNumber = 52490068
0:100  0:000  SmbiosTable.Type17->PartNumber = BLS8G3D1609DS1S001.
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = 1315
0:100  0:000  SmbiosTable.Type17->SerialNumber = 52490210
0:100  0:000  SmbiosTable.Type17->PartNumber = BLS8G3D1609DS1S00.
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'H97M-D3H' with board 'H97M-D3H'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=306C3
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  BrandString = Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
0:100  0:000   The CPU supported turbo
0:100  0:000  MSR 0x35               40008
0:100  0:000  MSR 0xE2 before patch 1E000404
0:100  0:000  MSR 0xCE              00080838_F3012800
0:100  0:000  corrected FLEX_RATIO = E0000
0:100  0:000  FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:100  0:000  MaxDiv/MinDiv: 40.0/8
0:100  0:000  Turbo: 42/43/44/44
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 8
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 4000 MHz
0:100  0:000  TSC: 4000 MHz
0:100  0:000  PIS: 100 MHz
0:100  0:000  ExternalClock: 25 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 0C00 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0C01 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 1187 class=030000
0:100  0:000   - GFX: Model=nVidia GeForce GTX 760 family 1FF (Nvidia)
0:100  0:000  PCI (00|01:00.01) : 10DE 0E0A class=040300
0:100  0:000   - HDMI Audio: 
0:100  0:000  PCI (00|00:02.00) : 8086 0412 class=030000
0:100  0:000   - GFX: Model=Intel HD Graphics 4600 (Intel)
0:100  0:000  PCI (00|00:03.00) : 8086 0C0C class=040300
0:100  0:000  PCI (00|00:14.00) : 8086 8CB1 class=0C0330
0:100  0:000  PCI (00|00:16.00) : 8086 8CBA class=078000
0:100  0:000  PCI (00|00:1A.00) : 8086 8CAD class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 8CA0 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 8C90 class=060400
0:100  0:000  PCI (00|00:1C.02) : 8086 8C94 class=060400
0:100  0:000  PCI (00|03:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 0 Vendor=Realtek
0:100  0:000  PCI (00|00:1C.03) : 8086 8C96 class=060400
0:100  0:000  PCI (00|04:00.00) : 8086 244E class=060401
0:100  0:000  PCI (00|00:1C.04) : 8086 8C98 class=060400
0:100  0:000  PCI (00|06:00.00) : 168C 0030 class=028000
0:100  0:000   - WIFI: Vendor=Atheros
0:100  0:000  PCI (00|00:1D.00) : 8086 8CA6 class=0C0320
0:100  0:000  PCI (00|00:1F.00) : 8086 8CC6 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 8C82 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 8CA2 class=0C0500
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:103  0:003  EFI\CLOVER\config.plist loaded: Success
0:103  0:000  === [ GetListOfThemes ] ===================================
0:104  0:000  - [00]: EMBEDDED
0:105  0:001  - [00]: RANDOM
0:106  0:001  === [ Found config plists ] ===============================
0:106  0:000  - config.plist
0:106  0:000  === [ GetEarlyUserSettings ] ==============================
0:106  0:000  timeout set to 5
0:106  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:106  0:000  KextsToPatch: 2 requested
0:106  0:000   - [00]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 20 in XHCI kext (9-series)) :: MatchOS: 10.11.x :: BinPatch :: data len: 7
0:106  0:000   - [01]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 20 in XHCI kext (9-series)) :: MatchOS: 10.12.x :: BinPatch :: data len: 7
0:106  0:000  Default theme: embedded
0:106  0:000  Hiding entries with string BOOTX64.EFI
0:106  0:000  Hiding entries with string Windows
0:106  0:000  === [ LoadDrivers ] =======================================
0:109  0:003  Loading AudioDxe-64.efi  status=Success
0:112  0:002   - driver needs connecting
0:112  0:000  Loading DataHubDxe-64.efi  status=Success
0:117  0:005  Loading FSInject-64.efi  status=Success
0:119  0:001  Loading SMCHelper-64.efi  status=Success
0:120  0:001  Loading HFSPlus.efi  status=Success
0:122  0:002   - driver needs connecting
0:122  0:000  Loading AppleImageCodec-64.efi  status=Success
0:123  0:001  Loading AppleKeyAggregator-64.efi  status=Success
0:125  0:001  Loading AppleUITheme-64.efi  status=Success
0:126  0:001  Loading EmuVariableUefi-64.efi  status=Success
0:127  0:001  EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success
0:127  0:000  Loading FirmwareVolume-64.efi  status=Success
0:128  0:001  Loading OsxAptioFixDrv-64.efi  status=Success
0:130  0:001  Loading OsxFatBinaryDrv-64.efi  status=Success
0:131  0:001  Loading PartitionDxe-64.efi  status=Success
0:133  0:001   - driver needs connecting
0:133  0:000  Loading VBoxHfs-64.efi  status=Success
0:134  0:001   - driver needs connecting
0:134  0:000  4 drivers needs connecting ...
0:134  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:134  0:000  Partition driver loaded: 
0:134  0:000  HFS+ driver loaded
0:134  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
6:518  6:384  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
6:587  0:068  === [ InitScreen ] ========================================
6:587  0:000  SetMaxResolution: found best mode 4: 1920x1080
6:755  0:168  Video mode change to mode #4: Success
6:755  0:000   - set
6:755  0:000  Console modes reported: 6, available modes:
6:755  0:000   - [01]: 80x25 (current mode)
6:755  0:000   - [02]: 80x50
6:755  0:000   - [03]: 100x31
6:755  0:000   - [04]: 128x30
6:755  0:000   - [06]: 120x50
6:755  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
6:756  0:000  Using embedded font: Success
6:843  0:086  === [ GetMacAddress ] =====================================
6:843  0:000  MAC address of LAN #0= 40:8D:5C:C9:58:B5:
6:843  0:000  === [ ScanSPD ] ===========================================
6:843  0:000  Scanning SMBus [8086:8CA2], mmio: 0xF7A18004, ioport: 0xF040, hostc: 0x11
6:862  0:018  Slot: 0 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLS8G3D1609DS1S00. SerialNo=05020409000302015
6:880  0:018  Slot: 1 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLS8G3D1609DS1S00. SerialNo=05020409000006017
6:899  0:018  Slot: 2 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLS8G3D1609DS1S00. SerialNo=05020409000006018
6:918  0:018  Slot: 3 Type 24 8192MB 1600MHz Vendor=Crucial Technology PartNo=BLS8G3D1609DS1S00. SerialNo=05020409000201010
6:918  0:000  === [ GetAcpiTablesList ] =================================
6:918  0:000  Get Acpi Tables List from RSDT:
6:918  0:000   - [00]: FACP  A M I len=132
6:918  0:000   - [01]: APIC  A M I len=146
6:918  0:000   - [02]: FPDT  A M I len=68
6:918  0:000   - [03]: SSDT  Ther_Rvp len=3054
6:918  0:000   - [04]: SSDT  Cpu0Ist len=1337
6:918  0:000   - [05]: SSDT  CpuSsdt len=2932
6:918  0:000   - [06]: MCFG  A M I len=60
6:918  0:000   - [07]: HPET  A M I len=56
6:918  0:000   - [08]: SSDT  SataTabl len=877
6:918  0:000   - [09]: SSDT  SaSsdt  len=23390
6:918  0:000   - [10]: BGRT  A M I len=56
6:918  0:000   - [11]: DMAR  BDW  len=184
6:918  0:000  Calibrated TSC Frequency = 3990761294 = 3990MHz
6:918  0:000  === [ GetUserSettings ] ===================================
6:918  0:000  USB FixOwnership: yes
6:918  0:000  Dropping 3 tables:
6:918  0:000   - [00]: Drop table  signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
6:918  0:000           - set table: 54445353,       6D50757043 to drop: no
6:918  0:000   - [01]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
6:918  0:000           - set table: 54445353,   74734930757043 to drop: yes
6:918  0:000   - [02]: Drop table  signature="DMAR" (52414D44)
6:918  0:000           - set table: 52414D44,                0 to drop: yes
6:918  0:000   - final DSDT Fix mask=00000000
6:918  0:000  EnableC6: yes
6:918  0:000  Using ProductName from config: iMac15,1
6:918  0:000  Using latest BiosVersion from clover
6:918  0:000  BiosVersion: IM151.88Z.0219.B00.1809190740
6:918  0:000  BiosReleaseDate: 09/19/2018
6:918  0:000  Using EfiVersion from clover: 222.0.0.0.0
6:918  0:000  Using FirmwareFeatures from clover: 0xF80FE137
6:918  0:000  Using FirmwareFeaturesMask from clover: 0xFF1FFF3F
6:918  0:000  Using PlatformFeature from clover: 0x1
6:918  0:000  Board-ID set from config as Mac-42FD25EABCABB2714
6:918  0:000  BoardType: 0xA
6:918  0:000  ChassisType: 0x13
6:918  0:000  Converted CustomUUID 19318076-A102-5D39-9B41-4212150510091
6:925  0:006  === [ Found DSDT tables ] =================================
6:981  0:055  === [ ScanVolumes ] =======================================
6:981  0:000  Found 13 volumes with blockIO
6:981  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
6:982  0:001  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
6:983  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
6:985  0:002  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
6:985  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
6:986  0:000          Result of bootcode detection: bootable unknown (legacy)
6:991  0:004  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,959E644F-0C18-4C89-83D1-4D0F13BD8970,0x64028,0x1BE80460)
6:991  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
6:992  0:000          Result of bootcode detection: bootable unknown (legacy)
7:002  0:010          This is SelfVolume !!
7:002  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)
7:003  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,E0589854-A446-4574-A6EF-5BB51B592B3E,0x37D0D768,0x135F20)
7:003  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
7:004  0:000          Result of bootcode detection: bootable unknown (legacy)
7:008  0:004  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D1C306E8-66DD-4C1E-9EE9-59D38BAEA89E,0x64028,0x3A2E1FE0)
7:009  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
7:009  0:000          Result of bootcode detection: bootable unknown (legacy)
7:019  0:009  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,D893CF8D-690E-4027-B965-75A17FFF45E8,0x64028,0x74662D60)
7:020  0:000  PutNvramPlistToRtVars: nvram.plist not found
7:020  0:000  === [ InitTheme ] =========================================
7:020  0:000  use night theme
7:020  0:000   using embedded theme
7:020  0:000  Using embedded font: Success
7:020  0:000  theme inited
7:020  0:000  Chosen embedded theme
7:020  0:000  after NVRAM boot-args=-v dart=0 kext-dev-mode=1
7:020  0:000  === [ Dump SMC keys from NVRAM ] ==========================
7:020  0:000  found AppleSMC protocol
7:020  0:000  Registered 0 SMC keys
7:020  0:000  === [ ScanLoader ] ========================================
7:020  0:000  - [04]: 'EFI'
7:020  0:000  - [05]: 'vmfarm-ssd-240'
7:020  0:000  - [06]: 'EFI'
7:022  0:002          AddLoaderEntry for Volume Name=EFI
7:022  0:000          skipped because entry is hidden
7:022  0:000  - [07]: 'Sierra'
7:026  0:003          AddLoaderEntry for Volume Name=Sierra
7:029  0:002      Check if volume Is Hibernated:
7:029  0:000      Check sleep image 'by signature':
7:034  0:004      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
7:034  0:000      using default sleep image name = \private\var\vm\sleepimage
7:037  0:003      no valid sleep image offset was found
7:037  0:000      no valid sleep image offset was found
7:038  0:000      no valid sleep image offset was found
7:038  0:000       sleepimage offset could not be acquired
7:038  0:000      hibernated: no - sign
7:038  0:000  - [08]: 'Recovery HD'
7:039  0:000          AddLoaderEntry for Volume Name=Recovery HD
7:040  0:000  - [09]: 'EFI'
7:040  0:000  - [10]: 'Samsung-500GB'
7:040  0:000  - [11]: 'EFI'
7:040  0:000  - [12]: 'VMFARMZ'
7:040  0:000  Scanning legacy ...
7:040  0:000  === [ AddCustomTool ] =====================================
7:041  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
7:041  0:000  Checking EFI partition Volume 4 for Clover
7:041  0:000  Checking EFI partition Volume 6 for Clover
7:042  0:000   Found Clover
7:042  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
7:042  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
7:111  0:068  === [ GetEfiBootDeviceFromNvram ] =========================
7:111  0:000   - found entry 0. 'Boot macOS from Sierra', Volume 'Sierra', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)\System\Library\CoreServices\boot.efii'
7:111  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
7:111  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
7:111  0:000  not run anime
7:175  0:063  GUI ready
14:930  7:754  not run anime
17:417  2:487  not run anime
23:601  6:183  not run anime
25:017  1:416  not run anime
27:793  2:775  not run anime
33:257  5:463  not run anime
101:425  68:167  not run anime
103:201  1:776  not run anime
106:257  3:055  not run anime
111:825  5:568  
Boot options:
-------------
111:825  0:000  BootOrder: 5: Boot0002, Boot0005, Boot0006, Boot0007, Boot0003
111:827  0:001   0) Boot0002: UEFI: ST1000DM010-2EP102, Attr: 0x1
111:827  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
111:827  0:000      Size: 200 (Attr:4 + FPl:2 + Desc:50 + FP:140 + Opt:4 = 200 -> OK)
111:827  0:000   1) Boot0005: UEFI OS, Attr: 0x1
111:827  0:000      HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)\EFI\BOOT\BOOTX64.EFII
111:827  0:000      Size: 116 (Attr:4 + FPl:2 + Desc:16 + FP:94 + Opt:0 = 116 -> OK)
111:828  0:000   2) Boot0006: UEFI: Samsung SSD 860 EVO 500GB, Attr: 0x1
111:828  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
111:828  0:000      Size: 214 (Attr:4 + FPl:2 + Desc:64 + FP:140 + Opt:4 = 214 -> OK)
111:828  0:000   3) Boot0007: UEFI: MSI REFLEX RX-240, Attr: 0x1
111:828  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
111:828  0:000      Size: 198 (Attr:4 + FPl:2 + Desc:48 + FP:140 + Opt:4 = 198 -> OK)
111:829  0:000   4) Boot0003: Hard Drive , Attr: 0x1
111:829  0:000      BBS(HD,)
111:829  0:000      Size: 735 (Attr:4 + FPl:2 + Desc:24 + FP:13 + Opt:692 = 735 -> OK)
111:829  0:000  
Boot options not in BootOrder list:
132:469  20:640   not found
132:469  0:000  -------------
132:503  0:033  ReinitSelfLib after theme change
132:503  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
132:503  0:000  === [ ScanVolumes ] =======================================
132:503  0:000  Found 13 volumes with blockIO
132:503  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
132:503  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
132:510  0:006  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
132:510  0:000          This is SelfVolume !!
132:510  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
132:518  0:008  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
132:519  0:000          Result of bootcode detection: bootable unknown (legacy)
132:519  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,959E644F-0C18-4C89-83D1-4D0F13BD8970,0x64028,0x1BE80460)
132:519  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
132:521  0:001          Result of bootcode detection: bootable unknown (legacy)
132:521  0:000          This is SelfVolume !!
132:521  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)
132:521  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,E0589854-A446-4574-A6EF-5BB51B592B3E,0x37D0D768,0x135F20)
132:522  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
132:522  0:000          Result of bootcode detection: bootable unknown (legacy)
132:522  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D1C306E8-66DD-4C1E-9EE9-59D38BAEA89E,0x64028,0x3A2E1FE0)
132:523  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
132:543  0:020          Result of bootcode detection: bootable unknown (legacy)
132:543  0:000  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,D893CF8D-690E-4027-B965-75A17FFF45E8,0x64028,0x74662D60)
132:544  0:000  theme inited
132:544  0:000  Chosen embedded theme
132:544  0:000  after NVRAM boot-args=-v dart=0 kext-dev-mode=1
132:544  0:000  === [ ScanLoader ] ========================================
132:544  0:000  - [04]: 'EFI'
132:544  0:000  - [05]: 'vmfarm-ssd-240'
132:544  0:000  - [06]: 'EFI'
132:544  0:000          AddLoaderEntry for Volume Name=EFI
132:544  0:000          skipped because entry is hidden
132:544  0:000  - [07]: 'Sierra'
132:545  0:000          AddLoaderEntry for Volume Name=Sierra
132:545  0:000      Check if volume Is Hibernated:
132:545  0:000      Check sleep image 'by signature':
132:545  0:000      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
132:545  0:000      using default sleep image name = \private\var\vm\sleepimage
132:545  0:000       sleepimage offset could not be acquired
132:545  0:000      hibernated: no - sign
132:545  0:000  - [08]: 'Recovery HD'
132:545  0:000          AddLoaderEntry for Volume Name=Recovery HD
132:545  0:000  - [09]: 'EFI'
132:545  0:000  - [10]: 'Samsung-500GB'
132:546  0:000  - [11]: 'EFI'
132:546  0:000  - [12]: 'VMFARMZ'
132:546  0:000  Scanning legacy ...
132:546  0:000  === [ AddCustomTool ] =====================================
132:546  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
132:546  0:000  Checking EFI partition Volume 4 for Clover
132:546  0:000  Checking EFI partition Volume 6 for Clover
132:546  0:000   Found Clover
132:546  0:000  EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored
132:546  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
132:614  0:068  === [ GetEfiBootDeviceFromNvram ] =========================
132:614  0:000   - found entry 0. 'Boot macOS from Sierra', Volume 'Sierra', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)\System\Library\CoreServices\boot.efii'
132:614  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
132:614  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
132:614  0:000  not run anime
136:057  3:443  not run anime
139:577  3:520  
Boot options:
-------------
139:577  0:000  BootOrder: 5: Boot0002, Boot0005, Boot0006, Boot0007, Boot0003
139:579  0:001   0) Boot0002: UEFI: ST1000DM010-2EP102, Attr: 0x1
139:579  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
139:579  0:000      Size: 200 (Attr:4 + FPl:2 + Desc:50 + FP:140 + Opt:4 = 200 -> OK)
139:579  0:000   1) Boot0005: UEFI OS, Attr: 0x1
139:579  0:000      HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)\EFI\BOOT\BOOTX64.EFII
139:579  0:000      Size: 116 (Attr:4 + FPl:2 + Desc:16 + FP:94 + Opt:0 = 116 -> OK)
139:580  0:000   2) Boot0006: UEFI: Samsung SSD 860 EVO 500GB, Attr: 0x1
139:580  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
139:580  0:000      Size: 214 (Attr:4 + FPl:2 + Desc:64 + FP:140 + Opt:4 = 214 -> OK)
139:580  0:000   3) Boot0007: UEFI: MSI REFLEX RX-240, Attr: 0x1
139:581  0:000      PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
139:581  0:000      Size: 198 (Attr:4 + FPl:2 + Desc:48 + FP:140 + Opt:4 = 198 -> OK)
139:581  0:000   4) Boot0003: Hard Drive , Attr: 0x1
139:581  0:000      BBS(HD,)
139:581  0:000      Size: 735 (Attr:4 + FPl:2 + Desc:24 + FP:13 + Opt:692 = 735 -> OK)
139:581  0:000  
Boot options not in BootOrder list:
160:221  20:640   not found
160:221  0:000  -------------
160:221  0:000  ReinitSelfLib after theme change
160:221  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
160:221  0:000  === [ ScanVolumes ] =======================================
160:221  0:000  Found 13 volumes with blockIO
160:221  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
160:224  0:002  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
160:230  0:006  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
160:233  0:002          This is SelfVolume !!
160:233  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
160:233  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
160:234  0:000          Result of bootcode detection: bootable unknown (legacy)
160:234  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,959E644F-0C18-4C89-83D1-4D0F13BD8970,0x64028,0x1BE80460)
160:234  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
160:235  0:000          Result of bootcode detection: bootable unknown (legacy)
160:235  0:000          This is SelfVolume !!
160:235  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)
160:235  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,E0589854-A446-4574-A6EF-5BB51B592B3E,0x37D0D768,0x135F20)
160:236  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
160:236  0:000          Result of bootcode detection: bootable unknown (legacy)
160:236  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D1C306E8-66DD-4C1E-9EE9-59D38BAEA89E,0x64028,0x3A2E1FE0)
160:237  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
160:237  0:000          Result of bootcode detection: bootable unknown (legacy)
160:237  0:000  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,D893CF8D-690E-4027-B965-75A17FFF45E8,0x64028,0x74662D60)
160:238  0:000  theme inited
160:238  0:000  Chosen embedded theme
160:239  0:000  after NVRAM boot-args=-v dart=0 kext-dev-mode=1
160:239  0:000  === [ ScanLoader ] ========================================
160:239  0:000  - [04]: 'EFI'
160:239  0:000  - [05]: 'vmfarm-ssd-240'
160:239  0:000  - [06]: 'EFI'
160:239  0:000          AddLoaderEntry for Volume Name=EFI
160:239  0:000          skipped because entry is hidden
160:239  0:000  - [07]: 'Sierra'
160:239  0:000          AddLoaderEntry for Volume Name=Sierra
160:239  0:000      Check if volume Is Hibernated:
160:239  0:000      Check sleep image 'by signature':
160:239  0:000      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
160:239  0:000      using default sleep image name = \private\var\vm\sleepimage
160:239  0:000       sleepimage offset could not be acquired
160:239  0:000      hibernated: no - sign
160:240  0:000  - [08]: 'Recovery HD'
160:240  0:000          AddLoaderEntry for Volume Name=Recovery HD
160:240  0:000  - [09]: 'EFI'
160:240  0:000  - [10]: 'Samsung-500GB'
160:240  0:000  - [11]: 'EFI'
160:240  0:000  - [12]: 'VMFARMZ'
160:240  0:000  Scanning legacy ...
160:240  0:000  === [ AddCustomTool ] =====================================
160:240  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
160:240  0:000  Checking EFI partition Volume 4 for Clover
160:240  0:000  Checking EFI partition Volume 6 for Clover
160:240  0:000   Found Clover
160:240  0:000  EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored
160:240  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
160:308  0:068  === [ GetEfiBootDeviceFromNvram ] =========================
160:308  0:000   - found entry 0. 'Boot macOS from Sierra', Volume 'Sierra', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)\System\Library\CoreServices\boot.efii'
160:308  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
160:308  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
160:308  0:000  not run anime
163:954  3:645  not run anime
169:003  5:049  EDITED: -v dart=0 kext-dev-mode=1 -liluoff
171:737  2:734  ReinitSelfLib after theme change
171:737  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
171:737  0:000  === [ ScanVolumes ] =======================================
171:737  0:000  Found 13 volumes with blockIO
171:737  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
171:740  0:002  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
171:747  0:006  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
171:749  0:002          This is SelfVolume !!
171:749  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
171:749  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,DFE85A06-586C-4A82-AF33-28C226F20A4E,0x28,0x64000)
171:750  0:000          Result of bootcode detection: bootable unknown (legacy)
171:750  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,959E644F-0C18-4C89-83D1-4D0F13BD8970,0x64028,0x1BE80460)
171:750  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,A658A4FE-BED1-4E65-AB16-7CCB75017D7C,0x28,0x64000)
171:751  0:000          Result of bootcode detection: bootable unknown (legacy)
171:751  0:000          This is SelfVolume !!
171:751  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)
171:751  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,E0589854-A446-4574-A6EF-5BB51B592B3E,0x37D0D768,0x135F20)
171:752  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,0ED45EAB-600C-4561-BF07-44F02BD6262C,0x28,0x64000)
171:752  0:000          Result of bootcode detection: bootable unknown (legacy)
171:752  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D1C306E8-66DD-4C1E-9EE9-59D38BAEA89E,0x64028,0x3A2E1FE0)
171:753  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,F6F95B83-FDF3-497C-ABF1-EB7222B6F4C4,0x28,0x64000)
171:753  0:000          Result of bootcode detection: bootable unknown (legacy)
171:753  0:000  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,D893CF8D-690E-4027-B965-75A17FFF45E8,0x64028,0x74662D60)
171:754  0:000  theme inited
171:754  0:000  Chosen embedded theme
171:755  0:000  after NVRAM boot-args=-v dart=0 kext-dev-mode=1 -liluoff 
171:755  0:000  === [ ScanLoader ] ========================================
171:755  0:000  - [04]: 'EFI'
171:755  0:000  - [05]: 'vmfarm-ssd-240'
171:755  0:000  - [06]: 'EFI'
171:755  0:000          AddLoaderEntry for Volume Name=EFI
171:755  0:000          skipped because entry is hidden
171:755  0:000  - [07]: 'Sierra'
171:755  0:000          AddLoaderEntry for Volume Name=Sierra
171:755  0:000      Check if volume Is Hibernated:
171:755  0:000      Check sleep image 'by signature':
171:755  0:000      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
171:755  0:000      using default sleep image name = \private\var\vm\sleepimage
171:756  0:000       sleepimage offset could not be acquired
171:756  0:000      hibernated: no - sign
171:756  0:000  - [08]: 'Recovery HD'
171:756  0:000          AddLoaderEntry for Volume Name=Recovery HD
171:756  0:000  - [09]: 'EFI'
171:756  0:000  - [10]: 'Samsung-500GB'
171:756  0:000  - [11]: 'EFI'
171:756  0:000  - [12]: 'VMFARMZ'
171:756  0:000  Scanning legacy ...
171:756  0:000  === [ AddCustomTool ] =====================================
171:756  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
171:756  0:000  Checking EFI partition Volume 4 for Clover
171:756  0:000  Checking EFI partition Volume 6 for Clover
171:756  0:000   Found Clover
171:756  0:000  EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored
171:756  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
171:825  0:068  === [ GetEfiBootDeviceFromNvram ] =========================
171:825  0:000   - found entry 0. 'Boot macOS from Sierra', Volume 'Sierra', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,F69E56F1-3E8B-43D9-9B59-B34A05352DA5,0x64028,0x37CA9740)\System\Library\CoreServices\boot.efii'
171:825  0:000  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
171:825  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
171:825  0:000  not run anime
172:650  0:824  Boot option Boot0000 not found
172:650  0:000  === [ StartLoader ] =======================================
172:650  0:000  Finally: ExternalClock=25MHz BusSpeed=99770kHz CPUFreq=3991MHz PIS: hw.busfrequency=100000000Hz
172:650  0:000  Loading boot.efi  status=Success
172:716  0:066  GetOSVersion: 10.12.6 (16G1710)
172:716  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
172:716  0:000  Filtering KextPatches:
172:716  0:000   - [00]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 20 in XHCI kext (9-series)) :: BinPatch :: [OS: 10.12.6 | MatchOS: 10.11.x | MatchBuild: All] ==> not allowed
172:716  0:000   - [01]: com.apple.driver.usb.AppleUSBXHCIPCI (change 15 port limit to 20 in XHCI kext (9-series)) :: BinPatch :: [OS: 10.12.6 | MatchOS: 10.12.x | MatchBuild: All] ==> allowed
172:716  0:000  Will not patch boot.efi
172:716  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success
172:785  0:068  === [ PatchSmbios ] =======================================
172:785  0:000  insert table 9 for dev 0:0
172:785  0:000  insert table 9 for dev 0:1
172:785  0:000  insert table 9 for dev 0:0
172:785  0:000  insert table 9 for dev 0:0
172:786  0:000  Trusting SMBIOS...
172:786  0:000  Channels: 2
172:786  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
172:786  0:000   partNum=BLS8G3D1609DS1S00.
172:786  0:000  SMBIOS Type 17 Index = 0 => 0 0:
172:786  0:000  BANK 0 DIMM0 1600MHz 8192MB
172:786  0:000   partNum=BLS8G3D1609DS1S00.
172:786  0:000  SMBIOS Type 17 Index = 1 => 2 2:
172:786  0:000  BANK 1 DIMM0 1600MHz 8192MB
172:786  0:000   partNum=BLS8G3D1609DS1S00.
172:786  0:000  SMBIOS Type 17 Index = 2 => 1 1:
172:786  0:000  BANK 0 DIMM1 1600MHz 8192MB
172:786  0:000   partNum=BLS8G3D1609DS1S00.
172:786  0:000  SMBIOS Type 17 Index = 3 => 3 3:
172:786  0:000  BANK 1 DIMM1 1600MHz 8192MB
172:786  0:000  mTotalSystemMemory = 32768
172:786  0:000  NumberOfMemoryDevices = 4
172:786  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
172:786  0:000  Type20[1]->End = 0x17FFFFF, Type17[2] = 0x8000
172:786  0:000  Type20[2]->End = 0xFFFFFF, Type17[1] = 0xC000
172:786  0:000  Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x14000
172:786  0:000  Table 131 is present, CPUType=31
172:786  0:000  Change to: 705
172:786  0:000  === [ PatchACPI ] =========================================
172:786  0:000  Xsdt reallocation done
172:786  0:000  old FADT length=10C
172:786  0:000   SignatureFixup: 0x2 -> 0x0
172:787  0:001  Apply DsdtFixMask=0x00000000
172:787  0:000     drop _DSM mask=0x0000
172:787  0:000  === [ FixBiosDsdt ] =======================================
172:899  0:112    0 replacements
172:900  0:000  PreCleanup XSDT: count=12, length=132
172:900  0:000  PreCleanup XSDT, corrected XSDT: count=12, length=132
172:900  0:000  === [ ACPIDropTables ] ====================================
172:900  0:000  Drop tables from XSDT, SIGN=DMAR TableID=BDW  Length=184
172:900  0:000   Table[11]: DMAR  BDW   184 dropped
172:900  0:000  Drop tables from XSDT, SIGN=SSDT TableID=Cpu0Ist Length=1337
172:900  0:000   Table[4]: SSDT  Cpu0Ist  1337 dropped
172:900  0:000    0 replacements
172:900  0:000    0 replacements
172:900  0:000  Found OperationRegion(PNVS, SystemMemory, C85E0F18, ...)
172:900  0:000    0 replacements
172:900  0:000    0 replacements
172:900  0:000  Found OperationRegion(SANV, SystemMemory, C85DDE18, ...)
172:900  0:000  Found OperationRegion(CCDC, SystemMemory, 80000000, ...)
172:900  0:000  === [ ACPIPatchedAML ] ====================================
172:900  0:000  Unsorted
172:900  0:000  Inserting SSDT-UIAC.aml from EFI\CLOVER\ACPI\patched: size=660 ... Success
172:900  0:000  Inserting SSDT.AML from EFI\CLOVER\ACPI\patched: size=2614 ... Success
172:901  0:001  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
172:901  0:000  Maximum control=0x28
172:901  0:000  Turbo control=0x2C
172:901  0:000  P-States: min 0x8, max 0x2C
172:901  0:000  SSDT with CPU P-States and plugin-type generated successfully
172:901  0:000  SSDT with CPU C-States generated successfully
172:901  0:000  Cleanup XSDT: count=16, length=164
172:901  0:000  corrected XSDT count=14, length=148
172:901  0:000  === [ RestSetup macOS ] ===================================
172:901  0:000  EdidDiscovered size=128
172:901  0:000  --- Discovered EDID Table size:128
172:901  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  04  72
172:901  0:000  010  |  E3  03  8F  D3  60  63  24  1A  01  03
172:901  0:000  020  |  80  35  1E  78  CA  39  B0  A5  54  50
172:901  0:000  030  |  9E  26  11  50  54  BF  EF  80  71  4F
172:901  0:000  040  |  81  40  81  80  81  C0  81  00  95  00
172:901  0:000  050  |  B3  00  D1  C0  02  3A  80  18  71  38
172:901  0:000  060  |  2D  40  58  2C  45  00  13  2B  21  00
172:901  0:000  070  |  00  1E  00  00  00  FD  00  37  4C  1E
172:901  0:000  080  |  50  11  00  0A  20  20  20  20  20  20
172:901  0:000  090  |  00  00  00  FC  00  4B  32  34  32  48
172:901  0:000  100  |  4C  0A  20  20  20  20  20  20  00  00
172:901  0:000  110  |  00  FF  00  54  30  46  53  53  30  30
172:901  0:000  120  |  31  38  35  30  33  0A  00  28
172:901  0:000  NVidia GFX injection not set
172:901  0:000  Intel GFX injection not set
172:902  0:000  stringlength = 1878
172:902  0:000  CurrentMode: Width=1920 Height=1080
172:902  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BC134298
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BC134298
172:902  0:000  Use origin smbios table type 1 guid.
172:902  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
172:902  0:000  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_GPUSensors.kext (v.1800)
172:907  0:004  Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.3.4)
172:930  0:022  Extra kext: EFI\CLOVER\kexts\Other\SMCSuperIO.kext (v.1.0.2)
172:932  0:002  Extra kext: EFI\CLOVER\kexts\Other\SMCProcessor.kext (v.1.0.2)
172:935  0:002  Extra kext: EFI\CLOVER\kexts\Other\SMCLightSensor.kext (v.1)
172:937  0:002  Extra kext: EFI\CLOVER\kexts\Other\VirtualSMC.kext (v.1.0.2)
172:941  0:004  Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.3.1)
172:945  0:003  Extra kext: EFI\CLOVER\kexts\Other\WhateverGreen.kext (v.1.2.6)
172:956  0:011  Extra kext: EFI\CLOVER\kexts\Other\USBInjectAll.kext (v.0.7.1)
173:002  0:045  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_CPUSensors.kext (v.1800)
173:006  0:003  Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL81xx.kext (v.0.0.90)
173:017  0:010  Extra kext: EFI\CLOVER\kexts\Other\NullCPUPowerManagement.kext (v.1.0.0d2)
173:022  0:005  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1800)
173:029  0:006  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
173:029  0:000  Custom boot screen not used because entry has unset use graphics

 

 

Your Preboot.Log: there is virtualsmc and fakesmc.  If you want to use VirtualSMC, remove FakeSMC. I think you must also remove his plugin FakeSMC*

Edited by Matgen84

Share this post


Link to post
Share on other sites
5 hours ago, Matgen84 said:

Your Preboot.Log: there is virtualsmc and fakesmc.  If you want to use VirtualSMC, remove FakeSMC. I think you must also remove his plugin FakeSMC*

 

SUCCESS!! :yoji:

 

I kept VirtualSMC and deleted fakesmc + fakesmc* from EFI

then in singleusermode removed fakesmc.kext from S/L/E

rebuilt/clear cache and it booted normally using lilu v 1.3.1

 

Thank you @Matgen84 @Badruzeus @ellaosx @AkimoA @Andrey1970 and @vit9696 for your valuable time and assistance in getting this sorted

 

Edited by barleyjuice
VirtualSMC

Share this post


Link to post
Share on other sites

Hi @vit9696,

#Question: What does the last logs line mean?

MacBook-Pro:~ badruzeus$ cat /private/var/log/system.log | grep Lilu
Jan 18 16:53:38 localhost kernel[0]: calling mpo_policy_init for Lilu
Jan 18 16:53:38 localhost kernel[0]: Security policy loaded: Lilu Kernel Extension 1.3.2 (Lilu)
Jan 18 16:53:38 localhost kernel[0]: Lilu:    mach @ decompression disallowed due to low out size 2563

Lilu && PlugIns that I'm currently using:

15:523  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
15:788  0:029  Extra kext: EFI\CLOVER\kexts\Other\RTCMemoryFixup.kext (v.1)
15:902  0:083  Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.3.5)
17:498  0:082  Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.3.2)
17:532  0:034  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
17:532  0:000  Extra kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext (v.1.0.2)
17:715  0:182    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCSuperIO.kext (v.1.0.2)
17:759  0:044    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCProcessor.kext (v.1.0.2)
17:793  0:034    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCLightSensor.kext (v.1)
17:823  0:030    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCBatteryManager.kext (v.1)
......  .....  ...

..and RTCMemoryFixup seems not loaded from $ kextstat output. I'm running it under 10.11.6 from github release version; can't build it with Xcode 8.2.1 bcoz incompatible project.

 

Thanks a lot.

Share this post


Link to post
Share on other sites

@Badruzeus, sorry for the late reply. I have just fixed RTCMemoryFixup project in master. It should work on 10.11.6 from now on, and we will include the fix in the following release.

 

As for the logs, first two are from XNU TrustedBSD API, which signalise about Lilu loading. We can do little about them.

As for the third one, it means that one of your prelinked kernels is either unsupported or corrupted. If everything else does work, you can ignore this message. Lilu could start off a non-prelinked kernel anyway.

Share this post


Link to post
Share on other sites
1 hour ago, vit9696 said:

@Badruzeus, sorry for the late reply. I have just fixed RTCMemoryFixup project in master. It should work on 10.11.6 from now on, and we will include the fix in the following release.

Great, built succeeded with Xcode 8.2.1 and well loaded under 10.11.6.

 

Another #Question:

On my case, I've applied Rehabman's system_RTC DSDT patch.

Do they have same purpose related to "RTC", or "RTCMemoryFixup" is another case?

Thanks again.

Screenshot 23.png

Edited by Badruzeus

Share this post


Link to post
Share on other sites

I believe Rehabman's RTC patch (similarly to all RTC-related patches in Clover) actually break RTC but limiting its available memory to 128 bytes (instead of 256). This makes AppleRTC.kext stop writing to RTC memory. RTCMemoryFixup allows you to avoid writing to certain areas, which in turn conflict with your BIOS, so I believe it is cleaner.

Share this post


Link to post
Share on other sites
9 minutes ago, vit9696 said:

I believe Rehabman's RTC patch (similarly to all RTC-related patches in Clover) actually break RTC but limiting its available memory to 128 bytes (instead of 256). This makes AppleRTC.kext stop writing to RTC memory. RTCMemoryFixup allows you to avoid writing to certain areas, which in turn conflict with your BIOS, so I believe it is cleaner.

OK thanks.. and I don't get yet what cause this rtc related logs:

// 10.11.6

MacBook-Pro:~ badruzeus$ cat /private/var/log/system.log | grep rtc
Jan 26 05:12:35 localhost kernel[0]: Lilu:     rtc @ rtc read failure 1 bytes from 180 E00002C2
Jan 26 05:12:35 localhost kernel[0]: VirtualSMC:   efend @ no extra rtc memory is present for key erase
Jan 26 05:13:11 MacBook-Pro com.apple.xpc.launchd[1] (com.apple.rtcreportingd): The UserName key is not supported for non-System services.

// 10.14.4 Beta 1

MacBook-Pro:~ badruzeus$ cat /private/var/log/system.log | grep rtc

Jan 23 10:09:43 MacBook-Pro rtcreportingd[389]: objc[389]: Class UpdateAndReportServices is implemented in both
/System/Library/PrivateFrameworks/RTCReporting.framework/Versions/A/RTCReporting (0x1041f8250)
and /usr/libexec/rtcreportingd (0x103cdf870). One of the two will be used. Which one is undefined.
Edited by Badruzeus

Share this post


Link to post
Share on other sites
8 minutes ago, vit9696 said:

If you reread what I said, "actually break RTC but limiting its available memory to 128 bytes (instead of 256). ", in particular, you would see why it says failed to read the memory. Last message is unrelated to bootloaders or kexts.

Oh, I see.. yeah, it's complicated (RTC on my mach).

so I think need to clean my DSDT from those RTC patch then use only RTCMemoryFixup.

Thank you.

Share this post


Link to post
Share on other sites
On 1/26/2019 at 11:16 PM, vit9696 said:

I believe Rehabman's RTC patch (similarly to all RTC-related patches in Clover) actually break RTC but limiting its available memory to 128 bytes (instead of 256). This makes AppleRTC.kext stop writing to RTC memory. RTCMemoryFixup allows you to avoid writing to certain areas, which in turn conflict with your BIOS, so I believe it is cleaner.

Any specific thread thread/topic for this?? How can we track a problematic offset?? 
And what offset should i exclude?? Sorry for bad english
image.png.238f0687ef4bbf21940dee846373e543.png

Share this post


Link to post
Share on other sites

Somebody needs to write this manual. Finding problematic offset is manual via (sleep or hibernation depending on the machine)/wake/reboot → check BIOS preferences reset cycle. You could always use https://en.wikipedia.org/wiki/Binary_search_algorithm to reduce the number of reboots. @lvs1974 can comment a bit more if absolutely necessary.

Share this post


Link to post
Share on other sites
14 hours ago, Andres ZeroCross said:

Any specific thread thread/topic for this?? How can we track a problematic offset?? 
And what offset should i exclude?? Sorry for bad english
image.png.238f0687ef4bbf21940dee846373e543.png

You can start with rtcfx_exclude=10-FF for example. Reboot and repeat sleep/wake/shutdown cycles (probably enter into hibernate). 

If cmos reset issue is not observed any more, you can try rtcfx_exclude=80-FF, the idea is to detect a bank (0D-7F or 80-FF), in the worst case writing into both can cause issues.

After you can try to use binary search to reveal an address/range of addresses as small as possible.

Share this post


Link to post
Share on other sites

I want to upgrade from 10.14.3 to 10.14.4 DB2. When boot [install mojave], it stuck at verbose screen.

Then I reboot back into 10.14.3, i received a panic info can be report to Apple, I check the detail info from Console.app:

Thu Feb  7 21:38:38 2019

*** Panic Report ***
panic(cpu 4 caller 0xffffff80102dbe8d): Kernel trap at 0xffffff7f93f2581c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f93f94c7a, CR3: 0x00000004a44fb00d, CR4: 0x00000000003626e0
RAX: 0x0000000000000002, RBX: 0xffffff82005fb5bc, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff82005fb580, RBP: 0xffffff82005fb580, RSI: 0xffffff80453b0680, RDI: 0x0000000000000002
R8:  0xffffff82005fb5bc, R9:  0x0000000000000780, R10: 0x0000000000000438, R11: 0x0000000000000780
R12: 0xffffff81c04815ac, R13: 0xffffff80453b0680, R14: 0xffffff80435de500, R15: 0xffffff82005fb608
RFL: 0x0000000000010202, RIP: 0xffffff7f93f2581c, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f93f94c7a, Error code: 0x0000000000000003, Fault CPU: 0x4, PL: 0, VF: 2

Backtrace (CPU 4), Frame : Return Address
0xffffff82005fb050 : 0xffffff80101ae9dd mach_kernel : _handle_debugger_trap + 0x47d
0xffffff82005fb0a0 : 0xffffff80102ea355 mach_kernel : _kdp_i386_trap + 0x155
0xffffff82005fb0e0 : 0xffffff80102dbc6a mach_kernel : _kernel_trap + 0x50a
0xffffff82005fb150 : 0xffffff801015bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff82005fb170 : 0xffffff80101ae3f7 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff82005fb290 : 0xffffff80101ae243 mach_kernel : _panic + 0x63
0xffffff82005fb300 : 0xffffff80102dbe8d mach_kernel : _kernel_trap + 0x72d
0xffffff82005fb470 : 0xffffff801015bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff82005fb490 : 0xffffff7f93f2581c as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc3c
0xffffff82005fb580 : 0xffffff7f93f60bff as.vit9696.WhateverGreen : _orgVaddrPresubmitTrampoline + 0x4fa
0xffffff82005fb5a0 : 0xffffff7f945832ac com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff82005fb5f0 : 0xffffff7f945823dc com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff82005fb960 : 0xffffff7f9455ca99 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff82005fb9c0 : 0xffffff7f9442b565 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff82005fba00 : 0xffffff7f9442b43a com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff82005fba90 : 0xffffff8010884d28 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff82005fbae0 : 0xffffff7f94431438 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff82005fbb30 : 0xffffff801088e1d2 mach_kernel : _is_io_connect_method + 0x212
0xffffff82005fbc70 : 0xffffff80102962a6 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff82005fbd80 : 0xffffff80101b421c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff82005fbdd0 : 0xffffff801018ec41 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff82005fbe50 : 0xffffff80101a34ae mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff82005fbef0 : 0xffffff80102c3007 mach_kernel : _mach_call_munger64 + 0x257
0xffffff82005fbfa0 : 0xffffff801015c476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f93f10000->0xffffff7f93f31fff
         as.vit9696.WhateverGreen(1.2.6)[073AC103-5807-3374-8D23-F98A0975D391]@0xffffff7f93f60000->0xffffff7f93fc2fff
            dependency: as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f93f10000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
         com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f94410000->0xffffff7f9445afff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[FD4E977D-A29B-3939-B2E6-64B473279EC2]@0xffffff7f94544000->0xffffff7f94764fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f90ae2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.8)[D5E9849D-22E0-380F-B560-A115614960D5]@0xffffff7f94495000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f90adb000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.12)[505935DB-B28B-3C9E-8A5C-3D38D70055CD]@0xffffff7f9453a000
            dependency: com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f94410000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E184e

Kernel version:
Darwin Kernel Version 18.5.0: Thu Jan 31 01:17:54 PST 2019; root:xnu-4903.250.319~62/RELEASE_X86_64
Kernel UUID: 65EC7A82-220E-3FD8-91E2-5AECA8B2FEF1
Kernel slide:     0x000000000fe00000
Kernel text base: 0xffffff8010000000
__HIB  text base: 0xffffff800ff00000
System model name: MacBookPro13,3 (Mac-A5C67F76ED83108C)

System uptime in nanoseconds: 52322842445
last loaded kext at 51683146336: com.apple.driver.AppleGraphicsDevicePolicy	3.30.12 (addr 0xffffff7f94bf1000, size 81920)
loaded kexts:
org.rehabman.voodoo.driver.PS2Mouse	1.9.1
org.rehabman.voodoo.driver.PS2Trackpad	1.9.1
org.rehabman.voodoo.driver.PS2Keyboard	1.9.1
com.no-one.BrcmPatchRAM2	2.2.10
com.no-one.BrcmFirmwareStore	2.2.10
org.rehabman.driver.FakePCIID	1.3.14
com.alexandred.VoodooI2C	2.1.4
org.coolstar.VoodooGPIO	1.1
org.rehabman.voodoo.driver.PS2Controller	1.9.1
as.vit9696.SMCProcessor	1.0.2
as.vit9696.AppleALC	1.3.5
as.lvs1974.AirportBrcmFixup	1.1.9
com.XPS.VerbStub	1.0.3
as.lvs1974.BT4LEContiunityFixup	1.1.2
as.vit9696.WhateverGreen	1.2.6
org.vanilla.driver.CPUFriend	1.1.5
ru.usrsse2.SMCBatteryManager	1
com.alexandred.VoodooI2CServices	1
ru.usrsse2.SMCLightSensor	1
as.vit9696.VirtualSMC	1.0.2
xyz.racermaster.NoTouchID	1.0.1
as.vit9696.Lilu	1.3.3
com.apple.driver.AppleGraphicsDevicePolicy	3.30.12
com.apple.driver.pmtelemetry	1
com.apple.iokit.IOUserEthernet	1.0.1
com.apple.iokit.IOBluetoothSerialManager	6.0.11d3
com.apple.driver.X86PlatformShim	1.0.0
com.apple.driver.AGPM	110.25.2
com.apple.driver.ApplePlatformEnabler	2.7.0d0
com.apple.Dont_Steal_Mac_OS_X	7.0.0
com.apple.driver.AppleHDAHardwareConfigDriver	282.51
com.apple.driver.AppleHV	1
com.apple.driver.AGDCBacklightControl	3.30.12
com.apple.driver.AppleHDA	282.51
com.apple.driver.ACPI_SMC_PlatformPlugin	1.0.0
com.apple.driver.AppleMCCSControl	1.5.6
com.apple.driver.AppleOSXWatchdog	1
com.apple.driver.AppleIntelPCHPMC	2.0.1
com.apple.driver.AppleLPC	3.1
com.apple.driver.AppleSMCLMU	212
com.apple.driver.AppleIntelSlowAdaptiveClocking	4.0.0
com.apple.driver.AppleFIVRDriver	4.1.0
com.apple.driver.AppleIntelSKLGraphicsFramebuffer	12.0.8
com.apple.driver.AppleBacklight	170.12.11
com.apple.nke.webcontentfilter	5
com.apple.filesystems.ntfs	3.13
com.apple.private.KextAudit	1.0
com.apple.driver.DiskImages.ReadWriteDiskImage	493.0.0
com.apple.driver.DiskImages.SparseDiskImage	493.0.0
com.apple.driver.DiskImages.UDIFDiskImage	493.0.0
com.apple.driver.DiskImages.HTTPBackingStore	493.0.0
com.apple.driver.DiskImages.FileBackingStore	493.0.0
com.apple.driver.DiskImages.RAMBackingStore	493.0.0
com.apple.driver.AppleFileSystemDriver	3.0.1
com.apple.filesystems.hfs.kext	407.200.4
com.apple.BootCache	40
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless	1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib	1.0.0
com.apple.AppleSystemPolicy	1.0
com.apple.filesystems.apfs	945.250.122
com.apple.driver.AirPort.BrcmNIC	1400.1.1
com.apple.driver.AppleAHCIPort	329.200.2
com.apple.driver.AppleSmartBatteryManager	161.0.0
com.apple.driver.AppleRTC	2.0
com.apple.driver.AppleACPIButtons	6.1
com.apple.driver.AppleACPIEC	6.1
com.apple.driver.AppleHPET	1.8
com.apple.driver.AppleSMBIOS	2.1
com.apple.driver.AppleAPIC	1.7
com.apple.nke.applicationfirewall	190
com.apple.security.TMSafetyNet	8
com.apple.driver.AppleGraphicsControl	3.30.12
com.apple.iokit.IOSerialFamily	11
com.apple.iokit.IOAVBFamily	740.1
com.apple.plugin.IOgPTPPlugin	740.2
com.apple.iokit.IOEthernetAVBController	1.1.0
com.apple.iokit.IOSkywalkFamily	1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport	6.0.11d3
com.apple.iokit.IOBluetoothHostControllerUSBTransport	6.0.11d3
com.apple.iokit.IOBluetoothHostControllerTransport	6.0.11d3
com.apple.driver.DspFuncLib	282.51
com.apple.kext.OSvKernDSPLib	528
com.apple.driver.IOPlatformPluginLegacy	1.0.0
com.apple.AppleGPUWrangler	3.30.12
com.apple.driver.AppleSMBusController	1.0.18d1
com.apple.driver.AppleUSBAudio	315.6
com.apple.driver.AppleHDAController	282.51
com.apple.iokit.IOHDAFamily	282.51
com.apple.iokit.IOAudioFamily	206.5
com.apple.vecLib.kext	1.2.0
com.apple.driver.AppleSMBusPCI	1.0.14d1
com.apple.driver.X86PlatformPlugin	1.0.0
com.apple.driver.IOPlatformPluginFamily	6.0.0d8
com.apple.iokit.IOSlowAdaptiveClockingFamily	1.0.0
com.apple.AppleGraphicsDeviceControl	3.30.12
com.apple.iokit.IOAcceleratorFamily2	404.8
com.apple.iokit.IOSurface	255.4.2
com.apple.driver.AppleBacklightExpert	1.1.0
com.apple.iokit.IONDRVSupport	530.51
com.apple.iokit.IOGraphicsFamily	530.59
com.apple.driver.usb.IOUSBHostHIDDevice	1.2
com.apple.driver.DiskImages.KernelBacked	493.0.0
com.apple.driver.usb.cdc	5.0.0
com.apple.driver.usb.networking	5.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice	1.2
com.apple.filesystems.hfs.encodings.kext	1
com.apple.driver.AppleXsanScheme	3
com.apple.iokit.IOAHCIBlockStorage	301.250.5
com.apple.driver.AppleUSBHostMergeProperties	1.2
com.apple.driver.usb.AppleUSBHostPacketFilter	1.0
com.apple.iokit.IOUSBFamily	900.4.2
com.apple.iokit.IONVMeFamily	2.1.0
com.apple.iokit.IO80211Family	1200.12

I try to add WEG argument [ngfxsubmit=0] then boot into installation again, it still stuck at the verbose mode.

Then I reboot back into 10.14.3, i received another panic info from Console.app:

Anonymous UUID:       BD838D05-146F-2A90-40D5-F5C700EC7110

Thu Feb  7 22:13:24 2019

*** Panic Report ***
panic(cpu 6 caller 0xffffff800dcdbe8d): Kernel trap at 0xffffff7f9192581c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f91994c7a, CR3: 0x00000004a430e024, CR4: 0x00000000003626e0
RAX: 0xffffff7f91925818, RBX: 0xffffff81be057000, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff81fe6f3560, RBP: 0xffffff81fe6f3560, RSI: 0xffffff8042f3e500, RDI: 0x0000000000000002
R8:  0xffffff81fe6f35bc, R9:  0x000000007fffffff, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0xffffff81be0595ac, R13: 0xffffff8042f3e500, R14: 0xffffff80410e8400, R15: 0xffffff81fe6f3608
RFL: 0x0000000000010286, RIP: 0xffffff7f9192581c, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f91994c7a, Error code: 0x0000000000000003, Fault CPU: 0x6, PL: 0, VF: 2

Backtrace (CPU 6), Frame : Return Address
0xffffff81fe6f3030 : 0xffffff800dbae9dd mach_kernel : _handle_debugger_trap + 0x47d
0xffffff81fe6f3080 : 0xffffff800dcea355 mach_kernel : _kdp_i386_trap + 0x155
0xffffff81fe6f30c0 : 0xffffff800dcdbc6a mach_kernel : _kernel_trap + 0x50a
0xffffff81fe6f3130 : 0xffffff800db5bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff81fe6f3150 : 0xffffff800dbae3f7 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff81fe6f3270 : 0xffffff800dbae243 mach_kernel : _panic + 0x63
0xffffff81fe6f32e0 : 0xffffff800dcdbe8d mach_kernel : _kernel_trap + 0x72d
0xffffff81fe6f3450 : 0xffffff800db5bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff81fe6f3470 : 0xffffff7f9192581c as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc3c
0xffffff81fe6f3560 : 0xffffff7f91964682 as.vit9696.WhateverGreen : __ZN4IGFX20wrapComputeLaneCountEPvS0_jiPi + 0x92
0xffffff81fe6f35a0 : 0xffffff7f91f9b2ac com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff81fe6f35f0 : 0xffffff7f91f9a3dc com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff81fe6f3960 : 0xffffff7f91f74a99 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff81fe6f39c0 : 0xffffff7f91e43565 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff81fe6f3a00 : 0xffffff7f91e4343a com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff81fe6f3a90 : 0xffffff800e284d28 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff81fe6f3ae0 : 0xffffff7f91e49438 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff81fe6f3b30 : 0xffffff800e28e1d2 mach_kernel : _is_io_connect_method + 0x212
0xffffff81fe6f3c70 : 0xffffff800dc962a6 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff81fe6f3d80 : 0xffffff800dbb421c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff81fe6f3dd0 : 0xffffff800db8ec41 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff81fe6f3e50 : 0xffffff800dba34ae mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff81fe6f3ef0 : 0xffffff800dcc3007 mach_kernel : _mach_call_munger64 + 0x257
0xffffff81fe6f3fa0 : 0xffffff800db5c476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f91910000->0xffffff7f91931fff
         as.vit9696.WhateverGreen(1.2.6)[76B394AE-05C5-3ED3-8489-4EC73630F74E]@0xffffff7f91960000->0xffffff7f919dafff
            dependency: as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f91910000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
         com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f91e28000->0xffffff7f91e72fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[FD4E977D-A29B-3939-B2E6-64B473279EC2]@0xffffff7f91f5c000->0xffffff7f9217cfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f8e4e2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.8)[D5E9849D-22E0-380F-B560-A115614960D5]@0xffffff7f91ead000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f8e4db000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.12)[505935DB-B28B-3C9E-8A5C-3D38D70055CD]@0xffffff7f91f52000
            dependency: com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f91e28000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 ngfxsubmit=0 -wegdbg -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E184e

Can someone help me?

Edited by darkhandz
more accuracy describing

Share this post


Link to post
Share on other sites
18 minutes ago, darkhandz said:

I want to upgrade from 10.14.3 to 10.14.4 DB2. When boot [install mojave], it stuck at verbose screen.

Then I reboot back into 10.14.3, i received a panic info below.


Thu Feb  7 21:38:38 2019

*** Panic Report ***
panic(cpu 4 caller 0xffffff80102dbe8d): Kernel trap at 0xffffff7f93f2581c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f93f94c7a, CR3: 0x00000004a44fb00d, CR4: 0x00000000003626e0
RAX: 0x0000000000000002, RBX: 0xffffff82005fb5bc, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff82005fb580, RBP: 0xffffff82005fb580, RSI: 0xffffff80453b0680, RDI: 0x0000000000000002
R8:  0xffffff82005fb5bc, R9:  0x0000000000000780, R10: 0x0000000000000438, R11: 0x0000000000000780
R12: 0xffffff81c04815ac, R13: 0xffffff80453b0680, R14: 0xffffff80435de500, R15: 0xffffff82005fb608
RFL: 0x0000000000010202, RIP: 0xffffff7f93f2581c, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f93f94c7a, Error code: 0x0000000000000003, Fault CPU: 0x4, PL: 0, VF: 2

Backtrace (CPU 4), Frame : Return Address
0xffffff82005fb050 : 0xffffff80101ae9dd mach_kernel : _handle_debugger_trap + 0x47d
0xffffff82005fb0a0 : 0xffffff80102ea355 mach_kernel : _kdp_i386_trap + 0x155
0xffffff82005fb0e0 : 0xffffff80102dbc6a mach_kernel : _kernel_trap + 0x50a
0xffffff82005fb150 : 0xffffff801015bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff82005fb170 : 0xffffff80101ae3f7 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff82005fb290 : 0xffffff80101ae243 mach_kernel : _panic + 0x63
0xffffff82005fb300 : 0xffffff80102dbe8d mach_kernel : _kernel_trap + 0x72d
0xffffff82005fb470 : 0xffffff801015bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff82005fb490 : 0xffffff7f93f2581c as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc3c
0xffffff82005fb580 : 0xffffff7f93f60bff as.vit9696.WhateverGreen : _orgVaddrPresubmitTrampoline + 0x4fa
0xffffff82005fb5a0 : 0xffffff7f945832ac com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff82005fb5f0 : 0xffffff7f945823dc com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff82005fb960 : 0xffffff7f9455ca99 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff82005fb9c0 : 0xffffff7f9442b565 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff82005fba00 : 0xffffff7f9442b43a com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff82005fba90 : 0xffffff8010884d28 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff82005fbae0 : 0xffffff7f94431438 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff82005fbb30 : 0xffffff801088e1d2 mach_kernel : _is_io_connect_method + 0x212
0xffffff82005fbc70 : 0xffffff80102962a6 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff82005fbd80 : 0xffffff80101b421c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff82005fbdd0 : 0xffffff801018ec41 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff82005fbe50 : 0xffffff80101a34ae mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff82005fbef0 : 0xffffff80102c3007 mach_kernel : _mach_call_munger64 + 0x257
0xffffff82005fbfa0 : 0xffffff801015c476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f93f10000->0xffffff7f93f31fff
         as.vit9696.WhateverGreen(1.2.6)[073AC103-5807-3374-8D23-F98A0975D391]@0xffffff7f93f60000->0xffffff7f93fc2fff
            dependency: as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f93f10000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
         com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f94410000->0xffffff7f9445afff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[FD4E977D-A29B-3939-B2E6-64B473279EC2]@0xffffff7f94544000->0xffffff7f94764fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f90aeb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f90ae2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.8)[D5E9849D-22E0-380F-B560-A115614960D5]@0xffffff7f94495000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f90adb000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.12)[505935DB-B28B-3C9E-8A5C-3D38D70055CD]@0xffffff7f9453a000
            dependency: com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f94410000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E184e

Kernel version:
Darwin Kernel Version 18.5.0: Thu Jan 31 01:17:54 PST 2019; root:xnu-4903.250.319~62/RELEASE_X86_64
Kernel UUID: 65EC7A82-220E-3FD8-91E2-5AECA8B2FEF1
Kernel slide:     0x000000000fe00000
Kernel text base: 0xffffff8010000000
__HIB  text base: 0xffffff800ff00000
System model name: MacBookPro13,3 (Mac-A5C67F76ED83108C)

System uptime in nanoseconds: 52322842445
last loaded kext at 51683146336: com.apple.driver.AppleGraphicsDevicePolicy	3.30.12 (addr 0xffffff7f94bf1000, size 81920)
loaded kexts:
org.rehabman.voodoo.driver.PS2Mouse	1.9.1
org.rehabman.voodoo.driver.PS2Trackpad	1.9.1
org.rehabman.voodoo.driver.PS2Keyboard	1.9.1
com.no-one.BrcmPatchRAM2	2.2.10
com.no-one.BrcmFirmwareStore	2.2.10
org.rehabman.driver.FakePCIID	1.3.14
com.alexandred.VoodooI2C	2.1.4
org.coolstar.VoodooGPIO	1.1
org.rehabman.voodoo.driver.PS2Controller	1.9.1
as.vit9696.SMCProcessor	1.0.2
as.vit9696.AppleALC	1.3.5
as.lvs1974.AirportBrcmFixup	1.1.9
com.XPS.VerbStub	1.0.3
as.lvs1974.BT4LEContiunityFixup	1.1.2
as.vit9696.WhateverGreen	1.2.6
org.vanilla.driver.CPUFriend	1.1.5
ru.usrsse2.SMCBatteryManager	1
com.alexandred.VoodooI2CServices	1
ru.usrsse2.SMCLightSensor	1
as.vit9696.VirtualSMC	1.0.2
xyz.racermaster.NoTouchID	1.0.1
as.vit9696.Lilu	1.3.3
com.apple.driver.AppleGraphicsDevicePolicy	3.30.12
com.apple.driver.pmtelemetry	1
com.apple.iokit.IOUserEthernet	1.0.1
com.apple.iokit.IOBluetoothSerialManager	6.0.11d3
com.apple.driver.X86PlatformShim	1.0.0
com.apple.driver.AGPM	110.25.2
com.apple.driver.ApplePlatformEnabler	2.7.0d0
com.apple.Dont_Steal_Mac_OS_X	7.0.0
com.apple.driver.AppleHDAHardwareConfigDriver	282.51
com.apple.driver.AppleHV	1
com.apple.driver.AGDCBacklightControl	3.30.12
com.apple.driver.AppleHDA	282.51
com.apple.driver.ACPI_SMC_PlatformPlugin	1.0.0
com.apple.driver.AppleMCCSControl	1.5.6
com.apple.driver.AppleOSXWatchdog	1
com.apple.driver.AppleIntelPCHPMC	2.0.1
com.apple.driver.AppleLPC	3.1
com.apple.driver.AppleSMCLMU	212
com.apple.driver.AppleIntelSlowAdaptiveClocking	4.0.0
com.apple.driver.AppleFIVRDriver	4.1.0
com.apple.driver.AppleIntelSKLGraphicsFramebuffer	12.0.8
com.apple.driver.AppleBacklight	170.12.11
com.apple.nke.webcontentfilter	5
com.apple.filesystems.ntfs	3.13
com.apple.private.KextAudit	1.0
com.apple.driver.DiskImages.ReadWriteDiskImage	493.0.0
com.apple.driver.DiskImages.SparseDiskImage	493.0.0
com.apple.driver.DiskImages.UDIFDiskImage	493.0.0
com.apple.driver.DiskImages.HTTPBackingStore	493.0.0
com.apple.driver.DiskImages.FileBackingStore	493.0.0
com.apple.driver.DiskImages.RAMBackingStore	493.0.0
com.apple.driver.AppleFileSystemDriver	3.0.1
com.apple.filesystems.hfs.kext	407.200.4
com.apple.BootCache	40
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless	1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib	1.0.0
com.apple.AppleSystemPolicy	1.0
com.apple.filesystems.apfs	945.250.122
com.apple.driver.AirPort.BrcmNIC	1400.1.1
com.apple.driver.AppleAHCIPort	329.200.2
com.apple.driver.AppleSmartBatteryManager	161.0.0
com.apple.driver.AppleRTC	2.0
com.apple.driver.AppleACPIButtons	6.1
com.apple.driver.AppleACPIEC	6.1
com.apple.driver.AppleHPET	1.8
com.apple.driver.AppleSMBIOS	2.1
com.apple.driver.AppleAPIC	1.7
com.apple.nke.applicationfirewall	190
com.apple.security.TMSafetyNet	8
com.apple.driver.AppleGraphicsControl	3.30.12
com.apple.iokit.IOSerialFamily	11
com.apple.iokit.IOAVBFamily	740.1
com.apple.plugin.IOgPTPPlugin	740.2
com.apple.iokit.IOEthernetAVBController	1.1.0
com.apple.iokit.IOSkywalkFamily	1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport	6.0.11d3
com.apple.iokit.IOBluetoothHostControllerUSBTransport	6.0.11d3
com.apple.iokit.IOBluetoothHostControllerTransport	6.0.11d3
com.apple.driver.DspFuncLib	282.51
com.apple.kext.OSvKernDSPLib	528
com.apple.driver.IOPlatformPluginLegacy	1.0.0
com.apple.AppleGPUWrangler	3.30.12
com.apple.driver.AppleSMBusController	1.0.18d1
com.apple.driver.AppleUSBAudio	315.6
com.apple.driver.AppleHDAController	282.51
com.apple.iokit.IOHDAFamily	282.51
com.apple.iokit.IOAudioFamily	206.5
com.apple.vecLib.kext	1.2.0
com.apple.driver.AppleSMBusPCI	1.0.14d1
com.apple.driver.X86PlatformPlugin	1.0.0
com.apple.driver.IOPlatformPluginFamily	6.0.0d8
com.apple.iokit.IOSlowAdaptiveClockingFamily	1.0.0
com.apple.AppleGraphicsDeviceControl	3.30.12
com.apple.iokit.IOAcceleratorFamily2	404.8
com.apple.iokit.IOSurface	255.4.2
com.apple.driver.AppleBacklightExpert	1.1.0
com.apple.iokit.IONDRVSupport	530.51
com.apple.iokit.IOGraphicsFamily	530.59
com.apple.driver.usb.IOUSBHostHIDDevice	1.2
com.apple.driver.DiskImages.KernelBacked	493.0.0
com.apple.driver.usb.cdc	5.0.0
com.apple.driver.usb.networking	5.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice	1.2
com.apple.filesystems.hfs.encodings.kext	1
com.apple.driver.AppleXsanScheme	3
com.apple.iokit.IOAHCIBlockStorage	301.250.5
com.apple.driver.AppleUSBHostMergeProperties	1.2
com.apple.driver.usb.AppleUSBHostPacketFilter	1.0
com.apple.iokit.IOUSBFamily	900.4.2
com.apple.iokit.IONVMeFamily	2.1.0
com.apple.iokit.IO80211Family	1200.12

I try to add WEG argument [ngfxsubmit=0] then boot into installation again, it still stuck at the verbose mode.

Then I reboot back into 10.14.3, i received another panic info:


Anonymous UUID:       BD838D05-146F-2A90-40D5-F5C700EC7110

Thu Feb  7 22:13:24 2019

*** Panic Report ***
panic(cpu 6 caller 0xffffff800dcdbe8d): Kernel trap at 0xffffff7f9192581c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f91994c7a, CR3: 0x00000004a430e024, CR4: 0x00000000003626e0
RAX: 0xffffff7f91925818, RBX: 0xffffff81be057000, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff81fe6f3560, RBP: 0xffffff81fe6f3560, RSI: 0xffffff8042f3e500, RDI: 0x0000000000000002
R8:  0xffffff81fe6f35bc, R9:  0x000000007fffffff, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0xffffff81be0595ac, R13: 0xffffff8042f3e500, R14: 0xffffff80410e8400, R15: 0xffffff81fe6f3608
RFL: 0x0000000000010286, RIP: 0xffffff7f9192581c, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f91994c7a, Error code: 0x0000000000000003, Fault CPU: 0x6, PL: 0, VF: 2

Backtrace (CPU 6), Frame : Return Address
0xffffff81fe6f3030 : 0xffffff800dbae9dd mach_kernel : _handle_debugger_trap + 0x47d
0xffffff81fe6f3080 : 0xffffff800dcea355 mach_kernel : _kdp_i386_trap + 0x155
0xffffff81fe6f30c0 : 0xffffff800dcdbc6a mach_kernel : _kernel_trap + 0x50a
0xffffff81fe6f3130 : 0xffffff800db5bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff81fe6f3150 : 0xffffff800dbae3f7 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff81fe6f3270 : 0xffffff800dbae243 mach_kernel : _panic + 0x63
0xffffff81fe6f32e0 : 0xffffff800dcdbe8d mach_kernel : _kernel_trap + 0x72d
0xffffff81fe6f3450 : 0xffffff800db5bc90 mach_kernel : _return_from_trap + 0xe0
0xffffff81fe6f3470 : 0xffffff7f9192581c as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc3c
0xffffff81fe6f3560 : 0xffffff7f91964682 as.vit9696.WhateverGreen : __ZN4IGFX20wrapComputeLaneCountEPvS0_jiPi + 0x92
0xffffff81fe6f35a0 : 0xffffff7f91f9b2ac com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff81fe6f35f0 : 0xffffff7f91f9a3dc com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff81fe6f3960 : 0xffffff7f91f74a99 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff81fe6f39c0 : 0xffffff7f91e43565 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff81fe6f3a00 : 0xffffff7f91e4343a com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff81fe6f3a90 : 0xffffff800e284d28 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff81fe6f3ae0 : 0xffffff7f91e49438 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff81fe6f3b30 : 0xffffff800e28e1d2 mach_kernel : _is_io_connect_method + 0x212
0xffffff81fe6f3c70 : 0xffffff800dc962a6 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff81fe6f3d80 : 0xffffff800dbb421c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff81fe6f3dd0 : 0xffffff800db8ec41 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff81fe6f3e50 : 0xffffff800dba34ae mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff81fe6f3ef0 : 0xffffff800dcc3007 mach_kernel : _mach_call_munger64 + 0x257
0xffffff81fe6f3fa0 : 0xffffff800db5c476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f91910000->0xffffff7f91931fff
         as.vit9696.WhateverGreen(1.2.6)[76B394AE-05C5-3ED3-8489-4EC73630F74E]@0xffffff7f91960000->0xffffff7f919dafff
            dependency: as.vit9696.Lilu(1.3.3)[7EEF390E-C307-3681-BF3B-3B2C971EC054]@0xffffff7f91910000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
         com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f91e28000->0xffffff7f91e72fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[FD4E977D-A29B-3939-B2E6-64B473279EC2]@0xffffff7f91f5c000->0xffffff7f9217cfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[39E2286B-5167-30C4-A36A-0BAEBD2C2B1B]@0xffffff7f8e4eb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f8e4e2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.8)[D5E9849D-22E0-380F-B560-A115614960D5]@0xffffff7f91ead000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f8e4db000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.12)[505935DB-B28B-3C9E-8A5C-3D38D70055CD]@0xffffff7f91f52000
            dependency: com.apple.iokit.IOGraphicsFamily(530.59)[AD9697FA-4A10-3E28-BD0B-2332C31BCE61]@0xffffff7f91e28000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 ngfxsubmit=0 -wegdbg -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E184e

Can someone help me?

Which clover version did you use?

Share this post


Link to post
Share on other sites
12 minutes ago, Andres ZeroCross said:

Which clover version did you use?

I tried r4862 and r4871, it's same.

Share this post


Link to post
Share on other sites

Please upload the kexts (binaries) you had your panic with or point to the github binaries.

Include Lili, WhateverGreen, and AppleIntelSKLGraphicsFramebuffer.

Edited by vit9696

Share this post


Link to post
Share on other sites
3 minutes ago, vit9696 said:

Please upload the kexts (binaries) you had your panic with or point to the github binaries.

Actually, I tried Lilu v1.3.3(Release) + WhateverGreen v1.2.6(Release), download from https://github.com/acidanthera/Lilu/releases and https://github.com/acidanthera/WhateverGreen/releases . 

 

And at Feb 3, I tried Lilu v1.3.1(Release) + WhateverGreen v1.2.6(Release), link is same as above. The panic log:

nonymous UUID:       BD838D05-146F-2A90-40D5-F5C700EC7110

Sun Feb  3 23:47:34 2019

*** Panic Report ***
panic(cpu 0 caller 0xffffff80124db25d): Kernel trap at 0xffffff7f96198830, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f96207852, CR3: 0x00000004a4087022, CR4: 0x00000000003626e0
RAX: 0x0000000000000002, RBX: 0xffffff82041f35bc, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff82041f3580, RBP: 0xffffff82041f3580, RSI: 0xffffff8047640b80, RDI: 0x0000000000000002
R8:  0xffffff82041f35bc, R9:  0x0000000000000780, R10: 0x0000000000000438, R11: 0x0000000000000780
R12: 0xffffff81c279b5ac, R13: 0xffffff8047640b80, R14: 0xffffff804590f900, R15: 0xffffff82041f3608
RFL: 0x0000000000010202, RIP: 0xffffff7f96198830, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f96207852, Error code: 0x0000000000000003, Fault CPU: 0x0, PL: 0, VF: 2

Backtrace (CPU 0), Frame : Return Address
0xffffff82041f3050 : 0xffffff80123ad8ed mach_kernel : _handle_debugger_trap + 0x47d
0xffffff82041f30a0 : 0xffffff80124e9725 mach_kernel : _kdp_i386_trap + 0x155
0xffffff82041f30e0 : 0xffffff80124db03a mach_kernel : _kernel_trap + 0x50a
0xffffff82041f3150 : 0xffffff801235ac90 mach_kernel : _return_from_trap + 0xe0
0xffffff82041f3170 : 0xffffff80123ad307 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff82041f3290 : 0xffffff80123ad153 mach_kernel : _panic + 0x63
0xffffff82041f3300 : 0xffffff80124db25d mach_kernel : _kernel_trap + 0x72d
0xffffff82041f3470 : 0xffffff801235ac90 mach_kernel : _return_from_trap + 0xe0
0xffffff82041f3490 : 0xffffff7f96198830 as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc50
0xffffff82041f3580 : 0xffffff7f961d3bff as.vit9696.WhateverGreen : _orgVaddrPresubmitTrampoline + 0x4fa
0xffffff82041f35a0 : 0xffffff7f96801620 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff82041f35f0 : 0xffffff7f9680074e com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff82041f3960 : 0xffffff7f967dade9 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff82041f39c0 : 0xffffff7f9668656d com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff82041f3a00 : 0xffffff7f96686442 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff82041f3a90 : 0xffffff8012a848d8 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff82041f3ae0 : 0xffffff7f9668c440 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff82041f3b30 : 0xffffff8012a8dd82 mach_kernel : _is_io_connect_method + 0x212
0xffffff82041f3c70 : 0xffffff8012495676 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff82041f3d80 : 0xffffff80123b300c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff82041f3dd0 : 0xffffff801238dc31 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff82041f3e50 : 0xffffff80123a248e mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff82041f3ef0 : 0xffffff80124c23d7 mach_kernel : _mach_call_munger64 + 0x257
0xffffff82041f3fa0 : 0xffffff801235b476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.1)[2BA44B2C-289E-39B7-A92B-C28291D5FC26]@0xffffff7f96184000->0xffffff7f961a4fff
         as.vit9696.WhateverGreen(1.2.6)[073AC103-5807-3374-8D23-F98A0975D391]@0xffffff7f961d3000->0xffffff7f96235fff
            dependency: as.vit9696.Lilu(1.3.1)[2BA44B2C-289E-39B7-A92B-C28291D5FC26]@0xffffff7f96184000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
         com.apple.iokit.IOGraphicsFamily(530.57)[08EBBAC5-C38A-3385-B97E-C88801380641]@0xffffff7f9666b000->0xffffff7f966b5fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[2AB4ED11-7DCF-3FBB-8336-75D46BA7E731]@0xffffff7f967c3000->0xffffff7f969d5fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f92ce2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.7)[D30D18A1-A83D-342A-9023-0C841F6F2441]@0xffffff7f96714000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f92cdb000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.10)[9402031D-3E23-3B49-9AB0-E50B150AEB15]@0xffffff7f967b9000
            dependency: com.apple.iokit.IOGraphicsFamily(530.57)[08EBBAC5-C38A-3385-B97E-C88801380641]@0xffffff7f9666b000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E174f

Kernel version:
Darwin Kernel Version 18.5.0: Wed Jan 16 00:04:52 PST 2019; root:xnu-4903.250.305~71/RELEASE_X86_64
Kernel UUID: 1C50C713-B653-354E-9293-86C6D3CF61AA
Kernel slide:     0x0000000012000000
Kernel text base: 0xffffff8012200000
__HIB  text base: 0xffffff8012100000
System model name: MacBookPro13,3 (Mac-A5C67F76ED83108C)

 

Share this post


Link to post
Share on other sites
6 minutes ago, darkhandz said:

Actually, I tried Lilu v1.3.3(Release) + WhateverGreen v1.2.6(Release), download from https://github.com/acidanthera/Lilu/releases and https://github.com/acidanthera/WhateverGreen/releases . 

 

And at Feb 3, I tried Lilu v1.3.1(Release) + WhateverGreen v1.2.6(Release), link is same as above. The panic log:


nonymous UUID:       BD838D05-146F-2A90-40D5-F5C700EC7110

Sun Feb  3 23:47:34 2019

*** Panic Report ***
panic(cpu 0 caller 0xffffff80124db25d): Kernel trap at 0xffffff7f96198830, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7f96207852, CR3: 0x00000004a4087022, CR4: 0x00000000003626e0
RAX: 0x0000000000000002, RBX: 0xffffff82041f35bc, RCX: 0x000000000000000a, RDX: 0x0000000000000018
RSP: 0xffffff82041f3580, RBP: 0xffffff82041f3580, RSI: 0xffffff8047640b80, RDI: 0x0000000000000002
R8:  0xffffff82041f35bc, R9:  0x0000000000000780, R10: 0x0000000000000438, R11: 0x0000000000000780
R12: 0xffffff81c279b5ac, R13: 0xffffff8047640b80, R14: 0xffffff804590f900, R15: 0xffffff82041f3608
RFL: 0x0000000000010202, RIP: 0xffffff7f96198830, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff7f96207852, Error code: 0x0000000000000003, Fault CPU: 0x0, PL: 0, VF: 2

Backtrace (CPU 0), Frame : Return Address
0xffffff82041f3050 : 0xffffff80123ad8ed mach_kernel : _handle_debugger_trap + 0x47d
0xffffff82041f30a0 : 0xffffff80124e9725 mach_kernel : _kdp_i386_trap + 0x155
0xffffff82041f30e0 : 0xffffff80124db03a mach_kernel : _kernel_trap + 0x50a
0xffffff82041f3150 : 0xffffff801235ac90 mach_kernel : _return_from_trap + 0xe0
0xffffff82041f3170 : 0xffffff80123ad307 mach_kernel : _panic_trap_to_debugger + 0x197
0xffffff82041f3290 : 0xffffff80123ad153 mach_kernel : _panic + 0x63
0xffffff82041f3300 : 0xffffff80124db25d mach_kernel : _kernel_trap + 0x72d
0xffffff82041f3470 : 0xffffff801235ac90 mach_kernel : _return_from_trap + 0xe0
0xffffff82041f3490 : 0xffffff7f96198830 as.vit9696.Lilu : __Z5qsortPvmmPFiPKvS1_E + 0xc50
0xffffff82041f3580 : 0xffffff7f961d3bff as.vit9696.WhateverGreen : _orgVaddrPresubmitTrampoline + 0x4fa
0xffffff82041f35a0 : 0xffffff7f96801620 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController11SetupClocksEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2PNS_10CRTCParamsE + 0x39e
0xffffff82041f35f0 : 0xffffff7f9680074e com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN31AppleIntelFramebufferController9hwSetModeEP21AppleIntelFramebufferP21AppleIntelDisplayPathPK29IODetailedTimingInformationV2 + 0xea
0xffffff82041f3960 : 0xffffff7f967dade9 com.apple.driver.AppleIntelSKLGraphicsFramebuffer : __ZN21AppleIntelFramebuffer14setDisplayModeEii + 0x47f
0xffffff82041f39c0 : 0xffffff7f9668656d com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer16doSetDisplayModeEii + 0xb3
0xffffff82041f3a00 : 0xffffff7f96686442 com.apple.iokit.IOGraphicsFamily : __ZN13IOFramebuffer17extSetDisplayModeEP8OSObjectPvP25IOExternalMethodArguments + 0x9a
0xffffff82041f3a90 : 0xffffff8012a848d8 mach_kernel : __ZN12IOUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x1d8
0xffffff82041f3ae0 : 0xffffff7f9668c440 com.apple.iokit.IOGraphicsFamily : __ZN23IOFramebufferUserClient14externalMethodEjP25IOExternalMethodArgumentsP24IOExternalMethodDispatchP8OSObjectPv + 0x74
0xffffff82041f3b30 : 0xffffff8012a8dd82 mach_kernel : _is_io_connect_method + 0x212
0xffffff82041f3c70 : 0xffffff8012495676 mach_kernel : _iokit_server_routine + 0x5e46
0xffffff82041f3d80 : 0xffffff80123b300c mach_kernel : _ipc_kobject_server + 0x12c
0xffffff82041f3dd0 : 0xffffff801238dc31 mach_kernel : _ipc_kmsg_send + 0xd1
0xffffff82041f3e50 : 0xffffff80123a248e mach_kernel : _mach_msg_overwrite_trap + 0x3ce
0xffffff82041f3ef0 : 0xffffff80124c23d7 mach_kernel : _mach_call_munger64 + 0x257
0xffffff82041f3fa0 : 0xffffff801235b476 mach_kernel : _hndl_mach_scall64 + 0x16
      Kernel Extensions in backtrace:
         as.vit9696.Lilu(1.3.1)[2BA44B2C-289E-39B7-A92B-C28291D5FC26]@0xffffff7f96184000->0xffffff7f961a4fff
         as.vit9696.WhateverGreen(1.2.6)[073AC103-5807-3374-8D23-F98A0975D391]@0xffffff7f961d3000->0xffffff7f96235fff
            dependency: as.vit9696.Lilu(1.3.1)[2BA44B2C-289E-39B7-A92B-C28291D5FC26]@0xffffff7f96184000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
         com.apple.iokit.IOGraphicsFamily(530.57)[08EBBAC5-C38A-3385-B97E-C88801380641]@0xffffff7f9666b000->0xffffff7f966b5fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
         com.apple.driver.AppleIntelSKLGraphicsFramebuffer(12.0.8)[2AB4ED11-7DCF-3FBB-8336-75D46BA7E731]@0xffffff7f967c3000->0xffffff7f969d5fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[0E3BDFBD-4C5F-37FC-84AF-726C30CEA0A6]@0xffffff7f92ceb000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBA0870F-6617-3D78-9075-26A2E8A9B691]@0xffffff7f92ce2000
            dependency: com.apple.iokit.IOAcceleratorFamily2(404.7)[D30D18A1-A83D-342A-9023-0C841F6F2441]@0xffffff7f96714000
            dependency: com.apple.iokit.IOReportFamily(47)[0578B054-D103-32EB-B468-D145EFCE0AA2]@0xffffff7f92cdb000
            dependency: com.apple.AppleGraphicsDeviceControl(3.30.10)[9402031D-3E23-3B49-9AB0-E50B150AEB15]@0xffffff7f967b9000
            dependency: com.apple.iokit.IOGraphicsFamily(530.57)[08EBBAC5-C38A-3385-B97E-C88801380641]@0xffffff7f9666b000

BSD process name corresponding to current thread: WindowServer
Boot args: dart=0 brcmfx-country=#a -lilubetaall agdpmod=vit9696 -v keepsyms=1 debug=0x100 -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
18E174f

Kernel version:
Darwin Kernel Version 18.5.0: Wed Jan 16 00:04:52 PST 2019; root:xnu-4903.250.305~71/RELEASE_X86_64
Kernel UUID: 1C50C713-B653-354E-9293-86C6D3CF61AA
Kernel slide:     0x0000000012000000
Kernel text base: 0xffffff8012200000
__HIB  text base: 0xffffff8012100000
System model name: MacBookPro13,3 (Mac-A5C67F76ED83108C)

 

WHat's your notebook model and specifications?? PC or Notebook???

Share this post


Link to post
Share on other sites
2 minutes ago, Andres ZeroCross said:

WHat's your notebook model and specifications?? PC or Notebook???

Laptop:	DELL XPS15 9550
BIOS:	v1.9.0
CPU:	Intel i7 6700HQ
RAM:	16G DDR4 2400
SSD:	SM961 256G NVMe SSD
Graphic: HD530, 1920x1080

 

3 minutes ago, vit9696 said:

Redo the panic with the latest debug binaries please.

OK, please wait some minutes.

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By miliuco
      macOS Catalina on: Gigabyte Z390 Aorus Elite motherboard + i3 9100 Coffee Lake processor + AMD Radeon RX 580 graphics card + fenvi FV-T919 WIFI and Bluetooth card + Clover r5121 + AppleALC, Lilu, VirtualSMC, XHCI-unsupported, IntelMausiEthernet, USBPorts and WhateverGreen.

      Hardware
       
      Gigabyte Z390 Aorus Elite motherboard: support for Intel 8 and 9 generation processors, Realtek ALC1220 audio, Intel I219V Ethernet, 4 PCI-E slots, 2, 3 and 3.1 USB ports, Intel Graphics 630 integrated graphics card 9th generation Intel i3 9100 processor Nox Hummer H-212 120mm CPU Fan Corsair Vengeance LPX 3200 MHz 16 GB RAM (2 x 8) AMD Radeon RX 580 8GB graphics card Wifi and Bluetooth Card Fenvi FV-T919 Mars Gaming MPII850 Power Supply (850W) Samsung EVO 860 SSD disk.
        What works well?

      Pretty much everything I've tried:
      Radeon RX 580: 3 DP ports and 1 HDMI port, output to 2 displays simultaneously Shutdown, reboot and sleep Integrated sound and HDMI sound output USB ports (2, 3 and 3.1) Enable TRIM for SSD drive AirDrop, Sidecar, etc.
        What is not working well?

      Integrated Intel UHD Graphics 630 card: see below.

      BIOS settings (version F9)

      I only write down the significant options, there are many other options that do not influence macOS and that you can configure to your liking (for example the LEDs on the board, etc.).
      XMP Profile: Auto / Profile 1 / Enabled (eXtreme Memory Profile, I use 3200 MHz memory and without this profile it works at 2600) Platform Power Management: Disabled VT-d: Disabled XHCI Hand-Off: Enabled Legacy USB Support: Enabled Network Stack: Disabled CSM: Disabled Secure Boot: Disabled Fast Boot: Disabled OS Type: Other OS Wake on LAN: Disabled Integrated Graphics: Auto Initial Display Output: PCIe 1 Slot DVMT Pre-Allocated: 256M or higher.
        EFI folder for Clover (installation USB stick / SSD disk with Catalina)

      SSDT

      Some SSDT.aml files in EFI/CLOVER/ACPI/patched.

      SSDT-DTPG.aml (helper module for SSDT)
      SSDT-EC.aml (USB power charge)
      SSDT-UIAC.aml (USB port mapping)
      SSDT-USBX.aml (USB port mapping)
      SSDT-PMC.aml got from OpenCore to have native NVRAM on Z390 mother boards
      SSDT-Z390-RP21-SLOT4-TB3HP.aml (Thunderbolt devices hot plug) it can be skipped.

      Drivers in EFI/CLOVER/drivers/UEFI

      ApfsDriverLoader.efi
      AudioDxe.efi
      DataHubDxe.efi
      FSInject.efi
      VBoxHfs.efi
      SMCHelper.efi
      OcQuirks.efi *
      OpenRuntime.efi *
      OcQuirks.plist *.

      * see OC Quirks below.

      Extensions in EFI / CLOVER / kexts / Other

      AppleALC.kext
      IntelMausi.kext
      Lilu.kext
      USBPorts.kext
      VirtualSMC.kext
      WhateverGreen.kext
      XHCI-unsupported.kext.

      NOTE 1: The USBPorts.kext extension along with 3 aml files included in patched folder (SSDT-EC.aml, SSDT-UIAC.aml y SSDT-USBX.aml) were generated by joanserramiret with the configuration of USB ports for this motherboard so that the limit defined by macOS of 15 ports is not exceeded. Leaves the system configured in this way:
      Enabled all USB2 ports that are not part of a USB3 port (1 internal for BT + 4 rear that are together + 2 on the front) Enabled the USB2 ports that are part of the 2 rear red USB3.1 ports Disabled the USB2 ports that are part of the 4 rear blue USB3 ports Enabled all USB3 ports except the internal one for USB type C connection. Summary: Rear blue ports do not recognize USB2 devices.

      NOTE 2: XHCI-unsupported.kext is required for XHC chipsets whose Device ID is not included in macOS. Depending on the USB driver of your board, it may be necessary to install some additional extension:
      8086: 8CB1 on macOS 10.11.1 or lower: XHCI-9-series.kext 8086: 8D31, 8086: A2AF, 8086: A36D, 8086: 9DED: XHCI-unsupported.kext 8086: 1E31, 8086: 8C31, 8086: 8CB1, 8086: 8D31, 8086: 9C31, 8086: 9CB1: FakePCIID.kext + FakePCIID_XHCIMux.kext. This board (generally Z390 chipset boards) carries the USB 3.1 controller with device ID A36D so the XHCI-unsupported kext is required. You can check your device ID at
      /System/Library/Extensions/IOUSBHostFamily.kext/Contents/Plugins/AppleUSBXHCIPCI.kext/Contents/Info.plist Config.plist file

      The differential options are:

      Acpi> DSDT: change HECI to IMEI / change SAT0 to SATA
      Acpi> Fixes: FixShutdown
      Acpi> Drop OEM_DSM
      Acpi> Drop Tables> DMAR / MATS
      Acpi> SSDT> PluginType selected (Plugin Type number blank)
      Acpi> Halt Enabler / FixHeaders

      Boot> Boot Arguments> slide = 0 / darkwake = 8

      Devices> USB> Inject / FixOwnership / HighCurrent
      Devices> Audio> Inject 11

      Kernel and Kext Patches> Apple RTC and KernelXCPM selected
      Kernel and Kext Patches> KextsToPatch> Name: com.apple.driver.AppleAHCIPort / Find: 40600200 / Replace: 00000000 / Comment: SATA hot plug
      Kernel and Kext Patches> KextsToPatch> Name: com.apple.driver.AppleAHCIPort / Find: 45787465 726E616C / Replace: 496E7465 726E616C / SATA orange icons

      SMBIOS> iMac19.1

      System Parameters> Inject Kexts: Yes / Inject System ID: selected.

      Quirks > select AvoidRuntimeDefrag – DevirtualiseMmio – EnableSafeModeSlide – ForceExitBootServices – ProtectUefiServices – ProvideConsoleGopEnable – ProvideCustomSlide – SetupVirtualMap – SyncRuntimePermissions and set ProvideMaxSlide = 0. *

      Set true DevirtualiseMmio and ProtectUefiServices in OcQuirks.plist file (recommended on Z390 mother boards).

      * see OC Quirks below.

      macOS Catalina install

      There are many publications with instructions so I will only comment on a few specific details.
      The installation USB memory must have a GUID partition scheme so that the board's UEFI can boot from it. I have prepared the USB with the createinstallmedia method + the application "Install macOS Catalina" in the Applications folder The device is USB 3 and, connected to the front USB 3 port, it performs the task quite quickly I have used Clover r5121 which is currently the latest version. The EFI folder of the installation USB can be the same as that of the hard disk with 2 differences: Acpi> SSDT> PluginType deselected and Acpi> Boot leave Default Boot Volume blank and Timeout -1 (so that no volume will boot automatically from the Clover menu). To mount the EFI partition (of the disk or the USB device) I have used Clover Configurator which makes this task very simple or the command line (diskutil), first finding out what disk and partition number is the EFI (diskutil list) and showing it later (mountdisk):
      sudo diskutil list
      sudo diskutil mountdisk / dev / disk2s3  
      RX 580

      Although my RX 580 card is a model from the XFX brand, known for using custom VBios and giving problems in macOS, in my case it seems to work well with Lilu and WhatEverGreen. Booting the operating system it does not show artifacts, the 3 DP ports and the only HDMI port work, you can send the image simultaneously to 2 screens (I have not tried more) with the usual duplication options, yo can send sound in addition to image to one TV by HDMI, during the installation of the operating system it works correctly provided that Lilu and WhatEverGreen are in the USB device, etc. GeekBench 5 Scores: Metal 50100 / OpenCL 44100. As a comparison, the integrated card does not reach 4800 in Metal.
      Regarding the hardware decoding of H264 and HEVC videos, the Hackintool tool and the VideoProc application report that it is not supported although the playback of files of both types with rates of up to 20 mbps is correct so I suspect that it actually encodes well. In order for hardware decoding to appear as supported in the commented applications, the integrated Intel Graphics 630 card must be enabled even if it is disconnected in headless mode (using the RX 580 card as primary sending image to the screen).
       


      Sound

      This board incorporates the Realtek ALC1220 chip that needs the AppleALC extension to work. AppleALC is a Lilu plugin so both must be properly installed.
      Note: Clover > Devices > Audio > Inject 11 or 13 or 15. I’ve tried several layouts and this are the only valid at least in my case.
      Some users have commented that the system does not load AppleALC and they have no sound despite having the extensions in EFI / CLOVER / kexts / Other. In these cases it can be successful to install AppleALC and Lilu in / Library / Extensions and rebuild the extensions cache with Hackintool (a very convenient way to do it) or with this Terminal command:
      sudo spctl --master-disable; sudo mount -uw /; killall Finder; sudo chown -v -R root: wheel / System / Library / Extensions; sudo touch / System / Library / Extensions; sudo chmod -v -R 755 / Library / Extensions; sudo chown -v -R root: wheel / Library / Extensions; sudo touch / Library / Extensions; sudo kextcache -i /  
      What this command does is disable Gatekeeper, mount the system disk in read / write mode, repair permissions on the extensions folders and rebuild the cache. But all of that is done by Hackintool with less work on our part.

      Ethernet

      This board carries the Intel I219V chip that works well with the IntelMausiEthernet extension.

      Wifi & Bluetooth

      I use a Fenvi FV T-919 mini PCI-E card that carries both wifi and bluetooth chips. This card works perfectly in macOS without needing anything other than placing it on the board because it is recognized as Airport Extreme and Bluetooth Apple. Has its own article on perez987.

      Disks

      Samsung EVO 860 SSD. It is a solid state disk with references to work well in Mac. In my case it works well, with a read speed of 430 and a write speed of 250. I have tried faster SSDs but they have given problems to install Catalina, instead with the EVO 860 everything has worked perfectly.

      Integrated graphics

      Integrated Intel Graphics 630 card: we can to make it work correctly by adding some properties in Clover's Devices tab. For it to work you have to:

      - enable it on the board as primary graphics: Initial Display Output IGFX instead of PCIe 1 Slot (actually this is the final step after modifying config.plist)
      - add in config.plist: Boot> Boot Arguments> igfxonln = 1
      - apply a patch (video and audio) in config.plist: Devices> Properties. It is easier to do it from the config.plist file in text mode than from Clover Configurator. With the file open as text find the lines
      <key>Audio</key> <dict> <key>ResetHDA</key> <false/> <key>Inject</key> <integer>11</integer> </dict>  
      Immediately above of them paste this text:
      <key>Properties</key> <dict> <key>PciRoot(0x0)/Pci(0x1F,0x3)</key> <dict> <key>layout-id</key> <data>CwAAAA==</data> <key>model</key> <string>Cannon Lake HDMI</string> <key>hda-gfx</key> <string>onboard-2</string> <key>AAPL,slot-name</key> <string>Internal@0,31,3</string> <key>device_type</key> <string>Audio device</string> </dict> <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>framebuffer-con0-busid</key> <data>AAAAAA==</data> <key>framebuffer-con0-type</key> <data>AAgAAA==</data> <key>framebuffer-con2-flags</key> <data>xwMAAA==</data> <key>model</key> <string>Intel UHD Graphics 630</string> <key>framebuffer-con1-busid</key> <data>AAAAAA==</data> <key>device-id</key> <data>kT4AAA==</data> <key>framebuffer-con2-type</key> <data>AAgAAA==</data> <key>framebuffer-con2-busid</key> <data>BAAAAA==</data> <key>device_type</key> <string>Display controller</string> <key>hda-gfx</key> <string>onboard-1</string> <key>framebuffer-patch-enable</key> <data>AQAAAA==</data> <key>framebuffer-con1-type</key> <data>AAgAAA==</data> <key>AAPL,slot-name</key> <string>Internal@0,2,0</string> <key>AAPL,ig-platform-id</key> <data>BwCbPg==</data> <key>framebuffer-con2-enable</key> <data>AQAAAA==</data> <key>framebuffer-con1-enable</key> <data>AQAAAA==</data> <key>framebuffer-con0-enable</key> <data>AQAAAA==</data> </dict> </dict> But the system crashes when comes out of sleep mode (the PC restarts after a few seconds of leaving sleep mode). This behavior occurs if the cable that comes out from the HDMI port on the motherboard (the only existing connector on this Mobo) plugs in a DisplayPort port on the monitor; if it plugs directly into another HDMI port (monitor or TV) the bug does not occurs and the PC goes in and out of sleep normally.

      Currently the only way to have the graphics card connected to a port other than HDMI without this crash is by replacing the "hda-gfx" property with "no-hda-gfx" in the above code of config.plist. The 2 lines
      <key>hda-gfx</key> <string>onboard-2</string> must be replaced by
      <key>No-hda-gfx</key> <data>AAAAAAAAAAA=</data> After adding this property, you will no longer have sound over HDMI / DP but sleep works very well.

      In summary:
      - Intel HDMI to DisplayPort monitor> has HDMI audio output but has kernel panic when coming from sleep
      - Intel HDMI to HDMI TV> has HDMI audio output and sleep works fine
      - Intel HDMI to DisplayPort monitor with "no-hda-gfx"> sleep works fine but HDMI audio output is lost.

      (based on the post "[GUIDE] General Framebuffer Patching Guide (HDMI Black Screen Problem)" by CaseySJ; thanks also to deeveedee for his help).

      This card can be left activated without connection to the monitor (headless mode) and apparently does not show any interference with the rest of the system.

      With the integrated card as the main card, the system shows enabled both graphics cards and allows to have a screen connected to the Intel 630 via HDMI and a different screen connected to the RX 580 via DP or HDMI, in this case the primary screen is that from the Intel and the other only works when the graphics driver is loaded but, once the system is up and running, the screens allow duplication options as if they depend on a single card.
       
       
       
       
       
      Evolution to Oc Quirks

      OC Quirks is an EFI driver for Clover that replaces AptioMemoryFix and all OsxAptioFix variants. It supports the OpenCore quirks model. AptioMemoryFix has evolved little in the most recent stage and is in a way becoming obsolete. Next versions of Clover will probably stop installing AptioMemoryFix and switch to OC Quirks which is evolving and receiving frequent improvements. You can read about this on the working group website: ReddestDream.

      Migrating our installation from AptioMemoryFix to OC Quirks is relatively simple:
      download the latest version of OC Quirks (search Releases, current version is 23) have a USB device that boots up properly to use in case of failure mount the disk's EFI partition delete AptioMemoryFix and any other OsxAptioFix variant add OcQuirks.efi, OpenRuntime.efi and OcQuirks.plist to Clover's drivers/UEFI folder change to true DevirtualiseMmio and ProtectUefiServices in the file OcQuirks.plist (recommended on boards with Z390 chipset) in Clover> Quirks config.plist file, check the boxes AvoidRuntimeDefrag - DevirtualiseMmio - EnableSafeModeSlide - ForceExitBootServices - ProtectUefiServices - ProvideConsoleGopEnable - ProvideCustomSlide - SetupVirtualMap - SyncRuntimePermissions and assign the value 0 to ProvideMaxSlide Restart the PC.  
      Kernel Panic with BIOS F10c if integrated graphics is enabled

      The Z390 Aorus Elite board comes with BIOS F9 with which the text of this post has been written.

      A few days ago I updated to the current version which is F10c and, since then, I have suffered a kernel panic with the forbidden symbol when going from the Clover menu to the macOS boot screen if the integrated card was enabled in BIOS. This happened regardless of whether the Intel UHD Graphics 630 card was set to Clover (fully for monitor output or headless mode for encoding) or not.

      Returning to BIOS F9 the system has returned to working as before and the kernel panic has disappeared. I can have the card enabled or disabled again in BIOS without problems.
       
      efi-quirks.zip
    • By Bikash
      I have installed catalina and bootloader is opencore.

      But the AppleAlc is not working for alc282 codec. I have tried evey layout id provided in documentation for alc282 but not working.
      But the voodohda is working.

      I have attached ioreg file, codec dump, applealc debug log and Efi folder.

      Please help me to make this work.
      Thank you
      applealc.zip
    • By juanjullian
      So i managed to install latest Catalina with opencore 0.59 and latest acidanthera's work on my HP 840-g4. But i have just one annoying problem: IMEI.
       
      The issue is exactly the same as described here:
       
       
      and in other thread at the commercial hack site with big eyes.
       
      Most of the applications not responding after wake from sleep. crashed quicklookup, quicktime player, youtube, hackintool, etc, etc. (spinning color wheel).
       
      So surfing deeply on the forums, i noticed that the problem is related of lack of IMEI injection. So i tried manual HECI to IMEI patch, knowing that WhateverGreen do that work. No results.
       
      The only way that i can get IMEI on ioReg is changing the address from 16 to 0, through a ACPI patch:
       
      dict> <key>Comment</key> <string>HECI ADDRESS</string> <key>Count</key> <integer>0</integer> <key>Enabled</key> <true/> <key>Find</key> <data>SEVDSQhfQURSDAAAFgA=</data> <key>Limit</key> <integer>0</integer> <key>Mask</key> <data></data> <key>OemTableId</key> <data></data> <key>Replace</key> <data>SEVDSQhfQURSDAAAAAA=</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> <key>TableLength</key> <integer>0</integer> <key>TableSignature</key> <data></data> </dict>  
      So with this i can get IMEI on IoReg
       

       

       
       
      But i think that is a problem! Because the KBL FrameBuffer can't initialize the MEI Service, even with the IMEI at ioreg, this is from boot syslog:
       
      2020-06-24 16:38:29.075004-0400 localhost kernel[0]: (AppleIntelKBLGraphicsFramebuffer) <AppleIntelKBLGraphicsFramebuffer`AppleIntelFramebufferController::createMEIDriver()> [IGFB][ERROR ] Failed to start MEI service! 2020-06-24 16:38:29.075014-0400 localhost kernel[0]: (AppleIntelKBLGraphicsFramebuffer) <AppleIntelKBLGraphicsFramebuffer`AppleIntelFramebufferController::createMEIDriver()> [IGFB][ERROR ] Failed to create MEI service  
       
      Soooo, the question is:
       
      How can i solve this?!!
       
      I also tried:
       
      1. SSDT-IGPU from Rehabman
      2. SSDT-IMEI
      3. Rename HECI to IMEI ACPI patch
      All these with no luck.
       
      PD: I have to say that not SDcard mount after wake from sleep and this are the only two thing left to solve in order to get full working hackintosh laptop.!
       
       
      Thanks in advance
       
      EFI.zip
      ioreg_imei0.ioreg.zip
      syslog.txt
    • By miliuco
      Install macOS 10.15 Catalina on Gigabyte P55-USB3 with Radeon RX 580 graphics card using a USB device created with the createinstallmedia command and Clover as bootloader. Instructions to install macOS 10.14 Mojave on this computer are almost identical, replacing Catalina app with Mojave, so this article is suitable for both versions of macOS. The Gigabyte P55-USB3 motherboard (and some others from the same brand with the P55 / H55 chipset) have made it easy to build a hackintosh and install macOS since 10 years ago. Although it is an old motherboard, the behavior with Mojave or Catalina is very good after changing the classic hard drive (HDD) for a solid state drive (SSD).

      Components of the hackintosh
      Gigabyte GA-P55-USB3 motherboard: P55 chipset, 1156 socket, ALC892 audio, Gigabit RTL8111D network, DDR3 RAM Intel Core i5-750 processor for socket 1156: 4 cores, 8MB cache, clock rate 2.66 GHz Fenvi FV-T919 wireless + Bluetooth card: PCI-Express, wifi is ac type, detected by macOS as Airport and Apple Bluetooth Radeon RX 580 8 GB graphics card: works OOB but with a few details to be considered, it has its own article.  
      Previous requirements
      Install macOS Catalina app in /Applications folder USB flash drive with at least 16GB prepared from Disk Utility with MBR partition scheme and formatted as Mac Os Plus (on older Gigabyte boards like mine, USB sticks partitioned with GUID scheme instead of MBR usually hang the system when booting) Recent version of Clover (I have used r5117) Recent versions of Lilu (at least 1.4.4) and WhateverGreen (at least 1.3.9) to fine-tune the behavior of the graphics card Recent version of RealtekRTL8111 (I have used 2.2.2) FaceSMC version 6.26-322 (newer versions disable automatic mounting of USB devices on my system).  
      Create install USB
      Run this command from Terminal (assuming the target device is called USB):
      Bash: sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/USB /Applications/Install\ macOS\ Catalina.app
      Clover must be installed on the USB memory, I choose the following options:
      Bootloader > Install boot0af on the MBR CloverEFi > CloverEFI 64-bit SATA BIOS Drivers, 64 bit > Recommended drivers > FSInject + SMCHelper + XhciDxe BIOS Drivers, 64 bit > File System drivers > ApfsDriverLoader Install RC scripts on selected volume Optional RC scripts > Disable sleep proxy client.  
      You have to copy 4 kexts to the EFI/CLOVER/kexts/Other folder of the USB device: FaceSMC 6.26-322, Lilu 1.4.4, WhateverGreen 1.3.9 and RealtekRTL8111 2.2.2. Regarding the config.plist file, the most significant is:
      Boot > kext-dev-mode = 1 in Boot arguments GUI > Theme embedded, EmbeddedThemeType Dark, Screen Resolution 1920x1080, Preboot in Hide Volume Graphics > blank, nothing is checked except if foxbox solution is used to have more than 2 connectors enabled RT Variables > 0x28 in BooterConfig and 0x67 in CsrActiveConfig SMBios > iMac14,2 Sytem Parameters> Yes in Inject Kexts and check Inject System ID.  
      Install macOS Catalina

      Boot from the USB device and choose Install macOS from Install macOS Catalina. The installation program runs until the PC restarts. Here choose Install macOS from HDD (the name of the volume you are installing macOS on). With RX 580 graphics card, the screen goes black in this second phase of the installation, it is a phase in which the user has nothing to do until the PC is restarted so you can let it work until the Clover menu again. You have to choose Boot macOS from HDDto boot the installed system from the hard disk, the screen is recovered and you can configure the account and the initial options. From this moment the screen works fine.

      In summary:
      Boot from USB > Clover menu > Install macOS from Install macOS Catalina > screen works fine Boot from USB > Clover menu > Install macOS from HDD > black screen Boot from USB > Clover menu > Boot macOS from HDD > screen works fine.  
      Install Clover and kexts on the hard drive

      Clover needs to be installed on the disk where we just installed macOS. Options are the same as when installing it on the USB memory. You also have to copy the 4 kexts (FaceSMC 6.26-322, Lilu 1.4.4, WhateverGreen 1.3.9 and RealtekRTL8111 2.2.2) into the EFI/CLOVER/kexts/Other folder on the EFI partition of the disk. And review the config.plist file remembering the comments for the USB.

      If everything goes well, the computer starts from the hard disk with a running copy of macOS Catalina.
       
       

×