Jump to content
vit9696

Lilu — kext and process patcher

270 posts in this topic

Recommended Posts

@Sherlocks, you didn't provide me with a full log, I don't see the first call of FakeBrcm::init, FakeBrcm::start.

And the last lines for AirportBrcmFixup:

2018-08-05 17:49:41.602104+0900  localhost kernel[0]: (kernel) AirportBrcmFixup:  BRCMFX @ (DBG) start is called, service name is AirPort_BrcmNIC, provider name is ARPT
2018-08-05 17:49:41.602113+0900  localhost kernel[0]: (kernel) AirportBrcmFixup:  BRCMFX @ (DBG) brcmfx-country in ioreg is set to #a

 

It means everything is OK, driver started!

What happened later?

Share this post


Link to post
Share on other sites
Advertisement
[mention=980913]Sherlocks[/mention], you didn't provide me with a full log, I don't see the first call of FakeBrcm::init, FakeBrcm::start.
And the last lines for AirportBrcmFixup:
2018-08-05 17:49:41.602104+0900  localhost kernel[0]: (kernel) AirportBrcmFixup:  BRCMFX @ (DBG) start is called, service name is AirPort_BrcmNIC, provider name is ARPT
2018-08-05 17:49:41.602113+0900  localhost kernel[0]: (kernel) AirportBrcmFixup:  BRCMFX @ (DBG) brcmfx-country in ioreg is set to #a
 
It means everything is OK, driver started!
What happened later?
okay wait. right now, i will give full log without grep option.

나의 LG-F800S 의 Tapatalk에서 보냄

Share this post


Link to post
Share on other sites
1 minute ago, Sherlocks said:

okay wait. right now, i will give full log without grep option.

나의 LG-F800S 의 Tapatalk에서 보냄
 

After using the new version, I have the same problem as you.

Share this post


Link to post
Share on other sites
7 minutes ago, lvs1974 said:

@Sherlocks, you didn't provide me with a full log, I don't see the first call of FakeBrcm::init, FakeBrcm::start.

And the last lines for AirportBrcmFixup:

2018-08-05 17:49:41.602104+0900  localhost kernel[0]: (kernel) AirportBrcmFixup:  BRCMFX @ (DBG) start is called, service name is AirPort_BrcmNIC, provider name is ARPT
2018-08-05 17:49:41.602113+0900  localhost kernel[0]: (kernel) AirportBrcmFixup:  BRCMFX @ (DBG) brcmfx-country in ioreg is set to #a

 

It means everything is OK, driver started!

What happened later?

 

here

 

fulllog.zip

Share this post


Link to post
Share on other sites
Posted (edited)
6 minutes ago, lvs1974 said:

One more question: what is a real device-id of your wi-fi card?

1.PNG.4ee7dea5710098e00f5dc5dd4efd83dd.PNG

 

real device id is 14E4-43B1 in aida64. i never use FakePCIID kext. only use DSDT injection for device id.

Edited by Sherlocks

Share this post


Link to post
Share on other sites
Posted (edited)
18 minutes ago, lvs1974 said:

@Sherlocks, could you test attached kexts please?

I added some fixes into AirportBrcmFixup, btw I also have card 43b1, it works (and worked before changes) on my laptop.

AirportBrcmFixup 1.1.5 (DEBUG).zip

Lilu 1.2.6 (DEBUG).zip

 

first of all, sorry for confused info before.

i found some info

wifi is working in your commit "Version 1.1.5: Mojave compatible"

https://github.com/acidanthera/AirportBrcmFixup/commit/4593a28aad10405ab46db6a5d8ddc1cfc9984279

log is here

1.txt

 

exactly, since vit9696's commit, my wifi is not working.

https://github.com/acidanthera/AirportBrcmFixup/commit/8f9c51d21a4bb3fc361571646b9ee97db39fa823

log is here

2.txt

 

now, i test your latest fixed version. then right, i will write report

 

EDIT1.

your latest version is working :)

here

working log.txt

 

 

 

Edited by Sherlocks

Share this post


Link to post
Share on other sites
Posted (edited)
8 minutes ago, lvs1974 said:

@Sherlocks, thank you for testing! I am glad to hear it works again. Would be nice to get more successful reports from other people, and I will commit my changes.

 

@lvs1974

you're welcome. i like a debug. i'm glad to help you fixed this issue.
always thank you for your hard work.

Edited by Sherlocks

Share this post


Link to post
Share on other sites
Posted (edited)

@vit9696

sorry for report here.

i don't know where i report some info in your project "https://github.com/acidanthera/macserial".

a model code of MacBookPro15,2 is "JHCC, JHCD"

thanks in advance

 

EDIT1.

also some shiki instruction was omitted compared original shiki repo.

 

original

https://github.com/acidanthera/Shiki/blob/cd67c8d9b4732bfc717956c95e92ceda7e7ab83c/Shiki/kern_start.cpp#L51

 

WEG

https://github.com/acidanthera/WhateverGreen/blob/master/WhateverGreen/kern_shiki.hpp#L61

 

Edited by Sherlocks

Share this post


Link to post
Share on other sites

Thanks, this one was dropped as the fix landed in macOS.

Share this post


Link to post
Share on other sites
Posted (edited)

Hi,

 

Last Lilu update broke iTunes dam play.

Some Lilu error trace at boot.

Don't have log atm.

 

Fixed Thanks Vit9696.

 

Fred

Edited by FredWst

Share this post


Link to post
Share on other sites
4 hours ago, vit9696 said:

VirtualSMC source code was published: https://github.com/acidanthera/VirtualSMC. Enjoy!

 

so what's better to use? this or the dear old fake smc? Which are the mein differences beetween this and your standard fake smc kext?

Share this post


Link to post
Share on other sites

Hi,

 

is it somehow possible to load a kext before another kext while booting up, and even further, ensuring that there will be 6 seconds of pause/other kext loading until the second kext will be loaded?

Edited by Funky frank

Share this post


Link to post
Share on other sites

Hey :)

 

as both Plugins dont have a seperate thread, just posting here, hope its ok?!

 

BT4LEContiunityFixup and AirportBrcmFixup dont load on 10.10.5 for me with the following errors,

built myself with newest Lilu-Dev-Build.

 

26.09.18 16:00:57,000 kernel[0]: BT4LEContiunityFixup:    init @ failed to call parent 6
26.09.18 16:09:03,000 kernel[0]: BT4LEContiunityFixup: bt4lefx @ failed to resolve __ZN25IOBluetoothHostController25SetControllerFeatureFlagsEj 2
 

26.09.18 16:09:07,000 kernel[0]: kxld[as.lvs1974.AirportBrcmFixup]: The following symbols are unresolved for this kext:
26.09.18 16:09:07,000 kernel[0]: kxld[as.lvs1974.AirportBrcmFixup]:     __ZN13Configuration18bootargBrcmCountryE
26.09.18 16:09:07,000 kernel[0]: Failed to load executable for kext as.lvs1974.AirportBrcmFixup.
26.09.18 16:09:07,000 kernel[0]: Kext as.lvs1974.AirportBrcmFixup failed to load (0xdc008016).
26.09.18 16:09:07,000 kernel[0]: Failed to load kext as.lvs1974.AirportBrcmFixup (error 0xdc008016).

 

thx :D
 

Share this post


Link to post
Share on other sites
On 9/26/2018 at 4:18 PM, reelgirly said:

Hey :)

 

as both Plugins dont have a seperate thread, just posting here, hope its ok?!

 

BT4LEContiunityFixup and AirportBrcmFixup dont load on 10.10.5 for me with the following errors,

built myself with newest Lilu-Dev-Build.

 

26.09.18 16:00:57,000 kernel[0]: BT4LEContiunityFixup:    init @ failed to call parent 6
26.09.18 16:09:03,000 kernel[0]: BT4LEContiunityFixup: bt4lefx @ failed to resolve __ZN25IOBluetoothHostController25SetControllerFeatureFlagsEj 2
 

26.09.18 16:09:07,000 kernel[0]: kxld[as.lvs1974.AirportBrcmFixup]: The following symbols are unresolved for this kext:
26.09.18 16:09:07,000 kernel[0]: kxld[as.lvs1974.AirportBrcmFixup]:     __ZN13Configuration18bootargBrcmCountryE
26.09.18 16:09:07,000 kernel[0]: Failed to load executable for kext as.lvs1974.AirportBrcmFixup.
26.09.18 16:09:07,000 kernel[0]: Kext as.lvs1974.AirportBrcmFixup failed to load (0xdc008016).
26.09.18 16:09:07,000 kernel[0]: Failed to load kext as.lvs1974.AirportBrcmFixup (error 0xdc008016).

 

thx :D
 

Hello,

I tried to solve these issues, you can checkout the latest versions and try again.

BTW: which Xcode version do you use to build? 

Share this post


Link to post
Share on other sites
Posted (edited)
22 hours ago, lvs1974 said:

Hello,

I tried to solve these issues, you can checkout the latest versions and try again.

BTW: which Xcode version do you use to build? 

hey,

thx for your reply :)

 

tried both kexts right now, sadly both still dont work :/

im still using xcode 7.2.1 but the prebuilt binaries didnt work also.

 

for AirportBrcmFixup last working version was 1.1.2 if i remember correctly and BT4LEContiunityFixup has never been working for me on yosemite.

 

these are the logs now:

 

AirportBrcmFixup:

Oct  2 18:08:16 I3BebeFlexi kernel[0]: kxld[as.lvs1974.AirportBrcmFixup]: The following symbols are unresolved for this kext:
Oct  2 18:08:16 I3BebeFlexi kernel[0]: kxld[as.lvs1974.AirportBrcmFixup]: 	__ZN13Configuration18bootargBrcmCountryE
Oct  2 18:08:16 I3BebeFlexi kernel[0]: kxld[as.lvs1974.AirportBrcmFixup]: 	__ZN13Configuration19bootargWlanMsgLevelE
Oct  2 18:08:16 I3BebeFlexi kernel[0]: kxld[as.lvs1974.AirportBrcmFixup]: 	__ZN13Configuration20bootargWlanMsgLevel2E
Oct  2 18:08:16 I3BebeFlexi kernel[0]: kxld[as.lvs1974.AirportBrcmFixup]: 	__ZN13Configuration21bootargBrcmEnableWowlE
Oct  2 18:08:16 I3BebeFlexi kernel[0]: Can't load kext as.lvs1974.AirportBrcmFixup - link failed.
Oct  2 18:08:16 I3BebeFlexi kernel[0]: Failed to load executable for kext as.lvs1974.AirportBrcmFixup.
Oct  2 18:08:16 I3BebeFlexi kernel[0]: Kext as.lvs1974.AirportBrcmFixup failed to load (0xdc008016).
Oct  2 18:08:16 I3BebeFlexi kernel[0]: Failed to load kext as.lvs1974.AirportBrcmFixup (error 0xdc008016).
Oct  2 18:08:16 I3BebeFlexi.local com.apple.kextd[48]: Failed to load /System/Library/Extensions/LiluFriend.kext/Contents/PlugIns/AirportBrcmFixup.kext - (libkern/kext) link error.
Oct  2 18:08:16 I3BebeFlexi.local com.apple.kextd[48]: Load as.lvs1974.AirportBrcmFixup failed; removing personalities from kernel.

BT4LEContiunityFixup's error msgs has been gone but it breaks bluetooth now completely:

Oct  2 18:27:48 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Oct  2 18:27:50 I3BebeFlexi kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x0000 ****
Oct  2 18:27:50 I3BebeFlexi kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed (matched on Device) -- 0x0000 ****
Oct  2 18:27:50 I3BebeFlexi kernel[0]: [IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x0000 

booting without it connects to the transport and starts up the adapter:

Oct  2 18:33:26 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Oct  2 18:33:28 I3BebeFlexi kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x5000 ****
Oct  2 18:33:28 I3BebeFlexi kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed (matched on Device) -- 0x5000 ****
Oct  2 18:33:28 I3BebeFlexi kernel[0]: [IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x5000 
Oct  2 18:33:28 I3BebeFlexi kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct  2 18:33:28 I3BebeFlexi kernel[0]: **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x9180 -- 0xa000 -- 0x5000 ****

thx again for your help :)

Edited by reelgirly

Share this post


Link to post
Share on other sites

Hi, I think Lilu is not loading on my system. Installed through Clover Configurator with Whatevergreen and AppleALC. Please help:

 

2018-09-14 12:26:07.058039+0200  localhost kernel[0]: Kext as.vit9696.Lilu start failed (result 0x5).
2018-09-14 12:26:07.058044+0200  localhost kernel[0]: Kext as.vit9696.Lilu failed to load (0xdc008017).
2018-09-14 12:26:07.058049+0200  localhost kernel[0]: Failed to load kext as.vit9696.Lilu (error 0xdc008017).
2018-09-14 12:26:07.155891+0200  localhost kernel[0]: Kext as.vit9696.AppleALC - library kext as.vit9696.Lilu not found.
2018-09-14 12:26:07.155901+0200  localhost kernel[0]: Can't load kext as.vit9696.AppleALC - failed to resolve library dependencies.
2018-09-14 12:26:07.155907+0200  localhost kernel[0]: Kext as.vit9696.AppleALC failed to load (0xdc00800e).
2018-09-14 12:26:07.155912+0200  localhost kernel[0]: Failed to load kext as.vit9696.AppleALC (error 0xdc00800e).
2018-09-14 12:26:07.178475+0200  localhost kernel[0]: Couldn't alloc class "Lilu"
2018-09-14 12:26:07.178513+0200  localhost kernel[0]: Couldn't alloc class "AppleALC"

Tom.

Share this post


Link to post
Share on other sites
15 hours ago, Kyvaith said:

I've compiled Lilu and AppleALC from master now, but I'm getting exact same output in log.

 

There are release for Lilu and AppleALC from repo. Do you try them? 

Share this post


Link to post
Share on other sites
3 hours ago, Matgen84 said:

 

There are release for Lilu and AppleALC from repo. Do you try them? 

 

Sure, this was my first try.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By headkaze
      Framebuffer patching in Mojave
      Binary patching framebuffers using KextsToPatch in Clover is no longer a viable method in Mojave for Skylake and above. Now you need to use Lilu + WhateverGreen.
       
      Not just for Mojave
      This method of framebuffer patching is not only required for Mojave we recommend it for all previous and future releases of macOS.
       
      Coffee Lake Users
      Please note that the new WhateverGreen will not work with fake Kaby Lake platform-id's. You will need to have either macOS 10.14 Beta 4 (18A336e) or macOS High Sierra 10.13.6 (17G2112). The latter is a special build only available to MacBookPro15,1 or MacBookPro15,2 board id's. You can create a macOS High Sierra 10.13.6 (17G2112) installer by running installinstallmacos.py. (Update: vit9696 added back ability to fake Kaby Lake platform-id's)
       
      Lilu + WhateverGreen
      WhateverGreen is going to replace all the other video patching plugins for Lilu (it currently has merged WhateverGreen, IntelGraphicsFixup, NvidiaGraphicsFixup, Shiki and CoreDisplayFixup). Others will likely follow (such as AppleALC, HibernationFixup and IntelGraphicsDVMTFixup). This is aiming to be the all-in-one solution for video.
       
      Beta Warning
      Please note that it is currently in a "beta" state so use it at your own risk. I am just documenting this here for those of you who want to get framebuffer patching now.
       
      Preliminary
      1. Remove:
      - FakePCIID_Intel_HD_Graphics
      - IntelGraphicsFixup
      - NvidiaGraphicsFixup
      - CoreDisplayFixup
      - Shiki
      2. Turn off all graphics injections in Clover:
      - config.plist/Graphics/Inject/ATI=NO
      - config.plist/Graphics/Inject/Intel=NO
      - config.plist/Graphics/Inject/NVidia=NO
      - config.plist/Graphics/ig-platform-id=
      - config.plist/Devices/FakeID/IntelGFX=

      3. Disable DSDT Clover fixes:
      - AddHDMI
      - FixDisplay
      - FixIntelGfx
      - AddIMEI
      4. Disable UseIntelHDMI
      5. Remove boot argument: -disablegfxfirmware
      6. Remove any IGPU and HDMI entries from:
      - config.plist/Devices/Arbitrary
      - config.plist/Devices/Properties
      - config.plist/Devices/AddProperties
      7. Remove any IGPU and HDMI related SSDT and DSDT from:
      - CLOVER/ACPI/patched
      8. Renaming GFX0 -> IGPU
      - WhateverGreen will do this automatically (see caveat below)
      - Be aware that WhateverGreen does not rename all instances of GFX0 -> IGPU but should be okay in most cases
      - You may need to include Clover GFX0 -> IGPU rename for other kexts or ACPI patching that require it
       
      Compile Lilu + WhateverGreen
      Download WhateverGreen. Make sure you place the debug version of Lilu into the root of WhateverGreen before you compile. Install Lilu and WhateverGreen kext's into the usual place. Compile WhateverGreen as debug if you want to view debug output.
       
      Having trouble compiling?
      If you're having trouble compiling you can wait for the official binaries or download my (unsupported) build_lilu.sh shell script and run it in a folder to download and build Lilu + WhateverGreen using Xcode automatically. I recommend you try the debug versions first (place them into Clover's EFI/Clover/kexts/Other folder).
       
      Get the device path of your IGPU:
      Download and use the gfxutil tool like so:
      $ ./gfxutil -f IGPU DevicePath = PciRoot(0x0)/Pci(0x2,0x0) ig-platform-id
      For the AAPL,ig-platform-id (AAPL,snb-platform-id for Sandy Bridge) entry Clover requires this value to be in Data format so you need to reverse the bytes. So if you want your platform-id to be 0x3EA50009 first reverse the bytes (0900A53E) then use Xcode's plist editor to add the values to Clover's config.plist.

       
      What ig-platform-id should I use for my system?
      You should choose one that is the closest match to your system. I recommend you do some research on this before choosing one. See post #2 for available options. More info can be found here.
       
      You can determine the generation of your CPU by the first digit after the hyphen.
      Examples:
      - Intel(R) Core(TM) i5-2760QM (Gen 2)
      - Intel(R) Core(TM) i7-5257U CPU @ 2.70GHz (Gen 5)
      - Intel(R) Core(TM) m3-6Y30 (Gen 6)
      - Intel(R) Core(TM) i5-8350U (Gen 8)
       
      Here are some recommended frames:
       
      Gen 2: Sandy Bridge (Intel HD Graphics 2000/3000)
      - Support started with OS X 10.7.x and ended with macOS 10.13.6
      - Metal support is not available
      - Desktop: 0x00030010 (default)
      - Laptop: 0x00010000 (default)
       
      Gen 3: Ivy Bridge (Intel HD Graphics 2500/4000)
      - Support started with OS X 10.8.x
      - Desktop: 0x0166000A (default), 0x01620005
      - Laptop: 0x01660003 (default), 0x01660009, 0x01660004
       
      Gen 4: Haswell (Intel HD Graphics 4200-5200)
      - Support started with OS X 10.9.x
      - Desktop: 0x0D220003 (default)
      - Laptop: 0x0A160000 (default), 0x0A260005 (recommended)
       
      Gen 5: Broadwell (Intel HD Graphics 5300-6300)
      - Support started with OS X 10.10.2
      - Desktop: 0x16220007 (default)
      - Laptop: 0x16260006 (default)
       
      Gen 6: Skylake (Intel HD Graphics 510-580)
      - Support started with OS X 10.11.4
      - Desktop: 0x19120000 (default)
      - Laptop: 0x19160000 (default)
       
      Gen 7: Kaby Lake (Intel HD Graphics 610-650)
      - Support started with macOS 10.12.6
      - Desktop: 0x59160000 (default)
      - Laptop: 0x591B0000 (default)
       
      Gen 8: Coffee Lake (Intel UHD Graphics 630)
      - Support started with macOS 10.13.6 (17G2112) / 10.14 beta 4 (18A336e)
      - Desktop: 0x3EA50000 (default), 0x3E9B0007 (recommended)
      - Laptop: 0x3EA50009 (default)
       
      Framebuffer Patching
      WhateverGreen does most of the work automatically for you and in most cases you do not need any extra Framebuffer Patching. At the minimum though you should choose an ig-platform-id suitable for your system and place it in config.plist/Devices/Properties like this:

      Here are some reasons why you might need extra Framebuffer Patching:
      - Setting DVMT for those who can't set it above 32 MB in BIOS (framebuffer-stolenmem / framebuffer-fbmem)
      - Setting higher VRAM for 4K users who experience graphical glitches (framebuffer-unifiedmem)
      - Disabling eGPU (disable-external-gpu)
      - Enable pixel clock patch for 4K support (enable-hdmi20)
      - Disabling connectors to enable sleep (framebuffer-pipecount / framebuffer-portcount / framebuffer-conX-type=-1)
      - Removing CNConnectorAlwaysConnected flag for eDP laptop screens on < 10.13.6 (framebuffer-con0-flags=0x00000090)
      - Changing connector types to match your systems ports (framebuffer-conX-type)
       
      Framebuffer Patching Types
      We have three different types of patches:
       
      1. Arbitrary (Recommended)
      framebuffer-patch-enable (required to enable below) framebuffer-framebufferid (optional; defaults to current platform-id) (all below are optional) framebuffer-mobile framebuffer-pipecount framebuffer-portcount framebuffer-memorycount framebuffer-stolenmem framebuffer-fbmem framebuffer-unifiedmem framebuffer-cursormem (Haswell only) framebuffer-conX-enable (required to enable below) framebuffer-conX-index framebuffer-conX-busid framebuffer-conX-pipe framebuffer-conX-type framebuffer-conX-flags 2. All Data
      framebuffer-conX-enable (required to enable below) framebuffer-conX-alldata 3. Find / Replace
      framebuffer-patchX-enable (required to enable below) framebuffer-patchX-framebufferid (optional; defaults to current platform-id) framebuffer-patchX-find framebuffer-patchX-replace framebuffer-patchX-count (optional; defaults to 1) You should place your patches in config.plist/Devices/Properties in Clover config.plist.
       
      Here are some example patches:
      - 32MB BIOS, 19MB stolen (framebuffer) 9MB fbmem (cursor) 2048MB unifiedmem (vram)

       
      - Pipe / Port Count 3 to 2
      - Connector 1 DP to HDMI
      - Connector 2 Disable

       
      Here is an example of the All Data method:

       
      Here is an example of the Find / Replace method:

       
      Framebuffer Dumps
      There are two ways to dump your framebuffer data (both require WhateverGreen + Lilu debug versions):
       
      1. Using -igfxdump boot flag to dump IGPU framebuffer kext to /AppleIntelFramebuffer_X_Y (root of your boot drive)
       
      There are several ways of reading this dump:
      - Using 010 Editor along with the IntelFramebuffer.bt template
      - Using Intel FB-Patcher File->Open menu
       
      2. Using -igfxfbdump boot flag to dump native and patched framebuffer table to ioreg at IOService:/IOResources/WhateverGreen
       
      There are several ways of reading this dump:
      - Using dump_platformlist.sh shell script
      - Using Intel FB-Patcher File->Import->IOReg Dump menu
       
      Debug Output
      To get debug output from Lilu use the -liludbgall liludump=60 boot flags. You will need to compile Lilu and WhateverGreen as debug for both of these flags to work. Log files should be located at /var/log/Lilu_*.
       
      To view debug paste the following into Terminal (weglog.txt will output to your home directory):
      log show --predicate 'process == "kernel" AND (eventMessage CONTAINS "WhateverGreen" OR eventMessage CONTAINS "Lilu")' --style syslog --source --last boot >weglog.txt
      Credits
      - vit9696 and lvs1974 for WhateverGreen (Full Credits) and Lilu (Full Credits)
      - Andrey1970 for his guide on applelife.ru
      - RehabMan for all data patching method, ioreg framebuffer dump and other contributions
       


    • By EduardoMenezes
      Good evening, friends of InsanelyMac.
      I have an Acer Aspire E5-571 notebook with Intel processor and Intel Graphics 5500 hd graphics card. When I was using the Sierra, the video card was recognized without problems. Now that I'm using Mojave I can not get the acceleration to work.
      I've been researching something about having to use Lilu.kext and whatevergreen.kext but I do not have enough knowledge to solve this problem.
      I need the help of someone who can explain to me how to solve this acceleration problem. I'm sure it will be of great value to other users like me.
      Thank you very much.

    • By yehia2amer
      I want to patch AppleHDA but I cannot find any post talking about ALC3220, I Tried AppleALC (ALC280 - layout-id 11), and AppleHDA Patcher v1.9  (ALC280 - layout-id 5) with no luck.
      I Also Tried VodooHDA but it is very buggy an unstable !
       
      So Now Please find my Codec details below
      ------
      Linux codec_dump.txt 
       
      Codec: Realtek ALC3220 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0280 Subsystem Id: 0x102805d4 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=5, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker+LO Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC3220 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x3d 0x3d] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC3220 Analog", type="Audio", device=0 Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x27 0x27] Converter: stream=1, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Rear Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Rear Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x03 0x0b Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00] Connection: 2 0x02 0x03 Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x4008c000: [N/A] Line Out at Ext N/A Conn = DIN, Color = UNKNOWN DefAssociation = 0x0, Sequence = 0x0 Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c 0x0d* Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00010014: OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Pincap 0x00000010: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x0f Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Rear Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a13040: [Jack] Mic at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=04, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Front Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19030: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=03, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Line Out Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01014020: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x40400001: [N/A] SPDIF Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=107 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo Connection: 8 0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12 0x13 Node 0x23 [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x18* 0x19 0x1a 0x1b 0x1d 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono  
      Jarvis report:
      Hardware info: - ATI R6xx HDMI (1002:aa01) - Controller 1002:aa30 (sub-ven:174b:aa30) - Driver: VoodooHDA SSDT-4.aml succesfully extracted! DSDT.aml succesfully extracted! SSDT.aml succesfully extracted! SSDT-1.aml succesfully extracted! SSDT-3.aml succesfully extracted! SSDT-2.aml succesfully extracted! Found "Device (HDEF)" in DSDT.aml Found property "layout-id" in DSDT.aml Found 1 occurennces of "layout-id" in ioreg, not sure what's will be for HDEF.. Found unsupported "layout-id = 11" in ioreg, will not work using Mirone's patches!!! No "Device (HDAU)" was found inside your ACPI tables. That is normal w/o a PCI Video card or w/o an HDMI connector on it! AppleHDA Patcher.app only supports (if patched by Mirone): layout-id 2 for laptop's, layout-id 5 for Desktop's with 3 connectors (pink, green and blue), layout-id 7 for Desktop's with 5/6 connectors (gray, black, orange, pink, green and blue), layout-id 9 for Desktop's with 5/6 connectors (gray, black, orange, pink, green, blue, CodecAddress:2) aDummyHDA.kext works only is /System/Library/Extensions. Laptop's may be need the provided ACPI Patch such system_IRQ.txt to be functional. HDAEnabler.kext maybe usefull if you don't want to edit your ACPI table or the Clover's config, or the org.Chameleon.Boot.plist. CodecCommander.kext is usefull in the case you have no sound after waking from sleep. Generated kexts should be installed in a proper way, repairing its permissions and rebuilding the cache: dragging kexts into Pandora's Box.app window will help you to do that!  
      Chipset Name: Intel Corporation C600/X79 series chipset High Definition Audio Controller (rev 06)
      Codec Name: Realtek ALC3220
      Linux Codec Dump : codec_dump.txt
      codec_dump.txt.svg
      Patched DSDT: DSDT.aml
       
       
      Thanks
       
    • By maiconjs
      I have a receiver with 7.1 channels, in which I transmit the formats Dolby Digital and DTS without problems by Windows, through the HDMI output of HD4000. On that same Laptop, I have the Hackintosh, with the High Sierra 10.13.6, and with audio enabled using AppleALC, but in the audio preferences, I can not enable the Digital audio format. Also did not find players like Mirillis SplashPro (which I have used in Windows) with the option of HDMI output Bitstream. Is it possible to enable this digital output on Hackintosh?
    • By macinsane
      What works? Everything. Sleep/Wake, NVMe, Airport, Spotlight, AMD-graphics

      Config:
      ASUS Prime B250M-C µATX-board
      Intel Core i5 7500 (Kaby Lake)
      Gigabyte Radeon RX560 4GB
      Airport-compatible PCIe-Card for Wifi and Bluetooth (BCM943602CS)
      2 NVMe drives: Samsung P961 with 1 TB and 256 GB

      Installed mac OS: 10.13.2
      Clover: 4334
       
      *Update 10.13.3*
      Added new config.plist and ssdt for AMD injection (config_amd_ssdt_10133.zip). With this config and Intel IGPU activated you'll get Metal2 (macOS GPUFamily1 v3). What did I do? Had to fake Skylake graphics or to prevent apps like iMovie or FinalCut from crashing. With Kabylake kexts loaded and IGPU as secondary graphics card, the computer will hard reset whenever the Intel GPU is utilised. Only Skylake kexts and activated IGPU will give you working Metal2 for the RX560.  
       
      *Update 10.13.2*
      Since this update a new approach is advisable to get the RX560 up and running (works for 10.13.1 and GM as well). I've added a working SSDT and injector kext that gives you graphics and HDMI audio. Sleep works fine too if you add the DSDT I compiled.  
       
      Credits go to @Toledo @Mork vom Ork and @Mieze because their work made this possible.
      *Update* I've added NEW config.plist and DSDT. For proper graphics power management you have to activate onboard graphics in BIOS but make PCIE the primary display. Furthermore you have to inject ig-platform-id 0x59120003 and let Clover patch GFX0 to IGPU. This is the only way to avoid crashes of iMovie, FinalCut or slowdowns after video playback.

      This may be the smoothest Hackintosh of my life. It is easier than Sierra install due to native support for most of the used hardware in High Sierra. Not much to do, using an up-to-date Clover version like 4184. Make sure you have apfs.efi in /Clover/drivers64UEFI/ on your EFI partition and that you delete EmuVariableUEFi.efi (downside: iMessage doesn't work without it). Somehow Rehabman's SSDT in /Clover/ACPI/patched helps avoiding crashes in iTunes.

      Needed kexts (on your EFI into /Clover/kexts/Other): FakeSMC, IntelMausiEthernet for ethernet, USBInjectAll and XHCI-200-series-injector for USB, Lilu and AppleALC for audio, Whatevergreen for AMD graphics, IntelGraphicsFixup and AMD9xxxControllerPatcher.kext.
       
      DSDT and SSDT go into EFI/Clover/ACPI/patched.
      config.plist.zip
      AMD9xxxControllerPatcher.kext.zip
      SSDT-HDMI-AMD-PEG0.aml.zip
      DSDT.aml.zip
      config_amd_ssdt_10133.zip
×