Recently Browsing 0 members
No registered users viewing this page.
Dell laptops and desktop can be monitored by SMM methods as mentioned is the old topic
I made a plugin SMIMonitor for FakeSMC in 2014 but it was 32bits and was not working. Only now I made it to be 64bits (as darkvoid did with kozleks branch) and got positive results
and after heating
So I have monitoring of 4 additional temperature sensors (CPU Proximity, GPU, DIMM, and Motherboard) and a CPU fan which initially stay at 0 rpm and start rotating after heating with 2882rpm.
Moreover I implemented a function for brave people to control fans
sudo SMC_util3 -kF0As -w2 The last digit 2 is a FAN speed you want to set
0 = Off
1 = Low
2 = High
If you have more then 1 fan then you can manage other one by choosing next key F1As, F2As etc.
Precaution! Writing the fan speed is dangerous and may cause a computer damage. Do this at your own risk!
Note. SMIMonitor.kext will work only with FakeSMC v3 provided with HWSensors3 in my signature.
Official release at sf.net contains SMIMonitor without write possibility.
Please test and report your successes and fails.
Hi guys, this thread is to show you a new and open source app, created by me, that I called TINU:
The name means: TINU Is Not #####, the U refers to a popular software that is used to create macOS hackintosh installers (that for good reasons is banned on this forum), but the aim of the name is to explain that this app is a totally different thing from that software and works in a totally different way.
This app basically is a graphical interface for the createinstallmedia executable that is inside the macOS and Mac OS X installer apps, it is capable to create a bootable installer completely vanilla like what you do using the command line method, and also this method is recommended by apple itself. In addition to this, this app provvides to you simplicity and flexybility, and lets you to avoid most of the steps needed with every other app.
TINU allows you to create easily a bootable macOS installer without messing around with command line stuff and without using disk utility, all you need to do is use the app and then install clover on the usb drive once TINU has finished or leave it as is if you want to use it on a real Mac.
- Simple-to-use UI that allows you to easily start the bootable macOS installer creation process.
- It can work with every macOS installer app that has the createinstallmedia executable inside its resources folder (including also beta and newly released installers).
- You can use any erasable volume that is at least 7 GB of size (if the volume's drive is not in GUID format, TINU will re-format it accordingly).
- Can work with the Mac OS recovery system, so you can create a bootable macOS installer from the macOS installer itself or from the macOS recovery partition, and you can use TINU to install macOS, too.
- 100% clean: The bootable macOS installers created with this tool are vanilla, just as if you created them using the command line "createinstallmedia" method in Terminal.
- Open Source: You can verify what this program does on your computer and you can create your own version by downloading and playing with the source code.
- Does not require any special preparations. Just open the program, make sure you have a USB drive plugged in and have a macOS installer app on your disk.
- No need to use Disk Utility. TINU can format your drive or partition for you.
- Integrated EFI partition mounter tool.
- Uses recent, modern, APIs and SDKs and the Swift 3 language.
- Transparent graphics style available (type alt-S or choose from the menu bar: View -> Use transparent style).
- Works using the latest versions of macOS and will also support newer Mac installers out of the box without requiring an update.
- Offers advanced features to customize your bootable macOS installer.
Features that are planned for future versions:
- Install and configure [Clover](https://sourceforge.net/projects/cloverefiboot/).
- Install kexts into Clover's kexts folder.
- Clover drivers customization
- Use custom DSDT in Clover
- Integrated pre-made Clover config templates database from a remote and open repository.
- Support for other languages, at least Italian.
- A computer that runs Mac OS X Yosemite or a more recent version (Mac OS X El Capitan is required to use TINU in a macOS recovery or installer).
- A drive or a free partition (on a drive which already supports GUID) of least 7 GB that you want to turn into a macOS/Mac OS X installer.
- A copy of a macOS/Mac OS X installer app (Maveriks or newer versions are supported) in the /Applications folder or in the root of any storage drive on your machine (excepted the drive or volume you want to turn into your macOS install media).
Frequently asked questions:
Thread (english) on insanelymac.com:
Thread (italian) on insanelymac.com:
Thread (english-german) on hackintosh-forum.de:
Post on Reddit:
Facebook hackintosh help and beta testing (Italian only):
Contact me (project creator):
- Insanelymac.com profile: http://www.insanelymac.com/forum/user/1390153-itztravelintime/
- email: email@example.com
- This software is under GNU GPL v3 license so any new branch/mod/third party release must be open source and under the same license
- I (project creator) assume no responsibility for any use of this app and this source code, and also for any kind of hardware and software damage to any computer and any device or peripheral that may come from this app or source code during it's use and outside it's usage
- I (project creator) do not guarantee support to you, this is only an open source project, not a product released by a company!
- This project is born only for educational and demonstrative purposes, it's not intended to be used for commercial purposes and it will never be, don't use source code from this project to create apps or software for that aim.
- This is a no-profit project, born only to let people to create macOS install medias in a more simple way and also to learn how to create this kind of apps.
- Apple for macos and installer apps and scripts
- People that helped me a lot:
Francesco Perchiazzi, Nicola Tomarelli, Roberto Sciortino, Raffaele Sonnessa, Ermanno Nicoletti, Tommaso Dimatore, Michele Vitiello Bonaventura, Massimiliano Faralli, Davide Dessì, Giorgio Dall'Aglio, Peter Paul Chato.
- Special thanks to Italian Hackintosh group!! for help (https://www.facebook.com/groups/Italia.hackintosh/?fref=ts)
- Thomas Tempelmann for help with the UI
- Pietro Caruso (ITzTravelInTime) for creating, maintaing and developing this project
Hi guys, Ive been through some Audio turmoil since upgrading to High Sierra with my recent rig
i7 7700k @5100mhz on a
GA Z270-UD5. F5 BIOS
The awesome audio command script did not give me any audio throughput. The devices were displayed but not working, thus neither iTunes nor Youtube were playing anything.
Since the script worked flawless in Sierra I looked through the 130 one for HS and maybe got confused, but it seemed not to patch the Z270-UD5's ALC1220A chip properly
looking at the plist I found that it applied the normal ALC1220 patch to my ALC1220A.
I tried changing the kext patch in the config file, but this did not gave me the desired result.
Thus there seems to be the patching in the AppleHDA affected as well.
With the older 124 command script working perfectly in 10.12 I dived into that script (which is a lot shorter than the 130) and changed the limitation of the OS (10.12.x) to 10.13 and ran it.
and voila perfect Audio as usual..
I'm gonna attach the changed script, maybe someone with connections can contact Toleda
And a screenshot of the kext patch.
Hopefully this is useful to some one out there with a ALC1220A who did not go the DSDT route yet.
Have an awesome week everyone
MODDED 10.13 audio_200_Series_hda-124_v1.0.command.zip
I have a Mac mini server with Yosemite, and I plugged a VGA Display using a VGA/HDMI adapter.
The issue is, when I shut down or restart the server, the display is not recognized, then I need to go to unplug and plug again, and server now recognizes the display.
I need to know how to make a logical "reconnection" for the adapter.
For example on Windows I use a devcom application to enable or disable the devices.
I was reading that the possible solution is using a kextunload command on terminal.
I don't know which kextfile I need to "unload" for the HDMI adapter.
Anybody have an idea about my issue? Another way to solve it?
Thanks in advance
Greetings from Mexico.
More info at: http://www.thegroovykosak.blogspot.pt Here is a video I made demonstrating the procedure. https://www.youtube.com/watch?v=04SLD2Kft60 Download your distro of choice, in my case Ubuntu Gnome edition Once that is done, use the command that follows to convert the iso to img: hdiutil convert -format UDRW ~/path/to/target.iso -o ~/path/to/ubuntu.img Note: OS X tends to put the .dmg ending on the output file automatically, delete the ".dmg" ending. Run diskutil list to get the current list of devices Insert your flash media Run diskutil list again and determine the device node assigned to your flash media (e.g. /dev/disk2) Run diskutil unmountDisk /dev/diskN (replace N with the disk number from the last command; in the previous example, Nwould be 2) Execute the following command while replacing /path/to/downloaded.img with the path where the image file is located; for example, ./ubuntu.img or ./ubuntu.dmg). sudo dd if=/path/to/downloaded.img of=/dev/rdiskN bs=1m Using /dev/rdisk instead of /dev/disk may be faster. Run diskutil eject /dev/diskN and remove your flash media when the command completes Restart your Mac and press Alt while the Mac is restarting to choose the USB-Stick or restart your PC and choose the USb from BIOS. This USB should work for any computer. Note: (If you see the error dd: Invalid number '1m', you are using GNU dd. Use the same command but replace bs=1m with bs=1M. If you see the error dd:/devdiskN: Resource busy, make sure the disk is not in use. Start the Disk Utility.app and unmount (don't eject) the drive. )
Thanks for watching