Jump to content
  1. MaLd0n

    MaLd0n

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By amadeusex
      Hi there y' all.
       
      I'm selling my hp z820 with the specs listed below since i accidentally bought me another one (that's what i told to my wife anyway).
       
      The machine runs flawlessly High High Sierra 10.13.6 and also has Win7 pro and Win10 pro licences tied to the machine.
       
      The machine is in Athens Greece
       
      I'm asking for 850 euros shipped within the European Union.
       
            Features     • Make: HP • Modell: Workstation Z820   • Processor: 2x Intel XEON Quad-Core E5-2670 • Chipset: Intel C602    • Memory: 64 GB ECC RAM • Sound: Realtek ALC262   • Graphics Card: nVidia Quadro K600   • SAS - Controller: LSI SAS2308 with RAID (0, 1, 5, 10) • SSD - 256 GB • DVD RW   • 2x Ethernet-LAN (RJ-45): 2 (Dual Gigabit - 1000Mbit/s)   • FireWire: 2x (1x Front + 1x Back) • USB 2.0: 5x (1x Front + 4x Back) • USB 3.0: 4x (2x Front + 2x Back)   • PS/2 • serial RS232 • Line-In • Line-Out • Microphone • FireWire (6polig)    • PSU: 1125 Watt    • (WxHxD): 203mm x 444mm x 525mm • Weight: 21,1kg   The machine is configured to also run MacOS 10.12.6 High Sierra without any hiccups and complete working power management.   Geekbench 4 64-bit  MacOs Results
      https://browser.geekbench.com/v4/cpu/12062123
      Geekbench 4 64-bit  Win10 Results
      https://browser.geekbench.com/v4/cpu/11972736
      The pictured drive trays are not included - the original placeholders will be mounted!


    • By fusion71au
      Clover r4989 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4989 for VMware.zip". Mount Clover-v2.4k-4989-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By Drovosek
      For my laptop Hp Pavilion 15-au028ur worked patch for HP 3165sf
      I also experimented with manual patching and assembled my own version:

      #Maintained by: RehabMan for: Laptop Patches #Battery_HP-DV6-1380ek.txt # created by RehabMan 2019-xx-xx # based on Battery_HP-DV6-1380ek.txt # additional patches for dv6-1380ek provided by chihab222, credit gsly # works for: #  HP Pavilion 15-au028ur, per Drovosek into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # 16-bit EC0 registers #                BADC,   16, #                BFCC,   16, #                MCUR,   16, #                MBRM,   16, #                MBCV,   16, into device label EC0 code_regex BADC,\s+16, replace_matched begin ADC0,8,ADC1,8, end; into device label EC0 code_regex BFCC,\s+16, replace_matched begin FCC0,8,FCC1,8, end; into device label EC0 code_regex MCUR,\s+16, replace_matched begin CUR0,8,CUR1,8, end; into device label EC0 code_regex MBRM,\s+16, replace_matched begin BRM0,8,BRM1,8, end; into device label EC0 code_regex MBCV,\s+16, replace_matched begin BCV0,8,BCV1,8, end; # 16-bit method access into method label CLRI code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBS code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBI code_regex (\^.*)BFCC replaceall_matched begin B1B2\(%1FCC0,%1FCC1\) end; into method label UPBS code_regex (\^.*)MCUR replaceall_matched begin B1B2\(%1CUR0,%1CUR1\) end; into method label UPBS code_regex (\^.*)MBCV replaceall_matched begin B1B2\(%1BCV0,%1BCV1\) end;
      The only problem - when it reaches 100% charge, it no longer falls until you reset the CMOS (15-30 seconds hold down the power button on the laptop). In the rehabman guide there is a patch for ASUS in this case, there is a patch method FBST. There is no such method in my DSDT.
      Can someone help?
      Here's a patched and clean DSDT: https://vk.com/doc183234383_509697931
    • By JackBauer24
      Hello,
       
      I have installed OSx86 10.11 (El Capitan) on April 2016 on my Asus Z170 Deluxe system.
       
      For installation I used this Thread.
       
      I used it a lot and it worked well. Meanwhile I switched to Linux and I use Win10 time to time. So OSX was forgotten. Also it did not boot correctly anymore.
       
      Now I wanted to start with a fresh installation and use OSX more often again. I want to use OSX 10.13 High Sierra. Is it working on my Asus Z170 Deluxe? I have the same Hardware as of April 2016 only the graphics card was updated to a Nvidia GTX1080.
       
      My Hardware in detail: Asus Z-170-Deluxe (Bios 3801), i7-6700k, EVGA GeForce GTX 1080 SC GAMING ACX 3.0, Samsung 950 Pro/M2 NVME 512MB, HDD 4 TB)
      Can I use some of support files from the old thread for the installation (see attachment)? Can I still use  Clover 2.3k r3292 Special Edition v2 ? Or do I need a newer version?
       
      Has someone installed High Sierra successfully on the Asus Z170 Deluxe ?
       
      About some hints where to start I would be thankful.
       
      regards
      JackBauer24
       
      Z170DeluxeFiles.zip
    • By ThatsMatt
      Salve, sono nuovo nel forum e mi serviva una mano nell'installazione dell' ultima versione di MacOs sul mio notebook HP Pavilion 15-ak112nl.
      Specifiche Tecniche: 
      CPU: Intel Core i7-6700HQ (2.60 / 3.50 GHz, 4 core, 6 MB CACHE L3). 
      Scheda Grafica: Intel HD Graphics 530 + NVIDIA GeForce GTX 950M 4 GB DDR3.
      Hard Disk: 1 TB SATA 5400 rpm.
      Ram: 8 GB DDR3L-1600.
      Audio: altoparlanti stereo Bang & Olufsen PLAY. 
      Rete: LAN 10/100, WLAN 802.11b/g/n, bluetooth 4.0 (Miracast).
      Grazie in Anticipo a chi mi risponderà
×