Jump to content

2 posts in this topic

Recommended Posts

Hello, I've got a Fujitsu Lifebook A555 with 8GB RAM, 1TB HDD, Intel i3 5th Generation processor (2.00 GHz), and Intel HD Graphics 5500.

I've heard that Intel 5500 needs the DMVT to be changed, but I also heard that I could risk bricking my laptop.
Will anyone please write out a guide for me to install El Capitan with Wifi and Sound working on this laptop?
I would really appreciate it. I didn't understand the Broadwell part of Rehabman's new users guide. I'm not saying you guys do all the hard work and let me relax, I just want a guide specifically for my laptop (just to be safe) if you could manage writing it. (Because I don't want to end up bricking it)
Thanks a lot 1f642.png:)

I've got an El Capitan usb installer created using Createinstallmedia on OS X (friend's macbook) and Clover.

Share this post


Link to post
Share on other sites
Advertisement

I see you also made a thread on the other forum using this exact wording. No one is going to make a guide for an A555 model unless they own an A555 themselves. The guides Rehabman linked you to is the best you're going to get.

 

According to someone's lspci dump for the A555 model it looks like it comes with Intel wifi which isn't supported. Hopefully it's easily accessible from a bottom panel for you to replace with a supported Broadcom or Atheros card, otherwise you'll have to get a cheap USB wifi adapter that has an OS X driver for it. I highly recommend trying to replace it over going USB.

 

Realtek gigabit LAN will be fine. Try: http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/

 

There's no support for PCIE Realtek card readers. A cheap USB card reader works fine in OS X.

 

You have an Alps touchpad so you'll have to use a version of VoodooPS2 made for Alps as the default one doesn't support it. I use this one on my laptop that also has Alps: http://forum.osxlatitude.com/index.php?/topic/9070-a-new-voodoops2controller-compatible-for-alps-on-sierrael-capitan-1011410115/

 

Your audio codec is ALC283 which you can get working with AppleALC or VoodooHDA. You shouldn't have too hard of a time getting it working.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By 00bob7
      LENOVO B50-80 : PROBLEME MIT INTEL HD 5500 GRAPHICS
       
      I need the help of someone who can explain to me how to solve this acceleration problem.
       I have Intel Graphics 5500 hd video card and she always shows 4mb, 
       I've read here that InsanelyMac Protégé, the same problem had and InsanelyMac Deity
      helped him
      Thank you very much.

    • By ludufre
      Novo guia para o macOS Catalina 10.15 (versões i3 e i5)!
      Obs.: Somente em inglês :/
       
       
       
      Instalando OS X El Capitan 10.11.5 no ASUS VivoBook S400C (também conhecido como S400CA)
      Especificamente no modelo S400CA-CA178H, provavelmente os outros modelos serão compatíveis
       
        
       
      Atualização 26/06/16 #1:
      - Adicionado correção para a logo no segundo estágio de boot em <KextsToPatch> no config.plist do Clover. (não está nos anexos)
       
       
      O que funciona e o que não funciona
       
      - Processador ->  Funciona. i5-3317U @ 1.7Ghz/2.6Ghz.  SpeedStep 8 a 26 estágios. AsusAICPUPM <true/> no Clover config.plist.  - Placa de vídeo ->  Funciona. HD4000. QE/CI completo. - Chipset ->  Funciona. - HDMI ->  Funciona. - VGA ->  Não funciona. - Som ->  Funciona. VoodooHDA 2.8.8 (use o arquivo PKG). - WiFi ->  Funciona. Substituída pela Athero 9285 Wifi/Bluetooth (http://lista.mercadolivre.com.br/atheros-9285#D[A:atheros-9285]). - Rede ->  Funciona. AtherosE2200Ethernet 2.1.0. - Teclado e touchpad ->  Funciona. ELAN, FocalTech and Synaptics (Smart Touchpad) Driver (Mac OS X) (versão 4.6). - Teclas FN do teclado ->  Funciona. Alterado "FN keys layout" na kext ELAN acima. - Controle do brilho ->  Funciona. DSDT patch (abaixo). - Repouso/Sleep ->  Não funciona. A tela desliga mas não entra em standby. - Bateria ->  Funciona. ACPIBatteryManager by RehabMan (versão 2016-0531) e DSDT patch (abaixo). - Leitor de cartão ->  Não funciona. - Câmera integrada ->  Funciona. AnyiSightCam. - Bluetooth ->  Funciona. Bluetooth Firmware Uploader (versão 3.1). - Segundo estágio da logo no boot ->  Funciona. Correção para adicionar em <KextsToPatch> abaixo.    
      O que você precisa para instalar
       
      - Instalação do El Capitan funcionando no VMware -> Baixei a versão 10.11 por torrent (busque torrent por "10.11 vmware"). Você pode usar um Mac real de um amigo. Meu método só funciona no Mavericks (10.9) e acima.
      - Um pendrive de 8GB ou maior.
      - App de instalação do OS X El Capitan -> Baixe na App Store por dentro da máquina virtual. Baixei a versão 10.11.5.
      - CloverEFI -> Também baixe por dentro da máquina virtual. Eu usei a compilação 3577.
      - Habilidade em DSDT patch-> Necessário para a bateria funcionar. [Guia] DSDT/SSDT - Conhecimentos Gerais. Ou você pode baixar o meu DSDT abaixo, mas eu não recomendo.
       
       
      Como criar o pendrive
       
      Criando a instalação:
       
      Formate o pendrive com partição GUID e nomeie como "Install"
       
      Abra o terminal e execute o comando:
       
       
      Isso vai levar 30 minutos.

      Instalando o bootloader:
       
      Baixe o CloverEFI (usei 3577) e instale com essas opções em "Install OS X El Capitan":

      Opções:
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - Drivers64UEFI - CsmVideoDxe-64
      - Drivers64UEFI - OsxAptioFixDrv-64
       
      Vai ser criado uma partição com nome EFI. Edite o arquivo /EFI/CLOVER/config.plist e altere os seguintes valores:
        - Graphics - Inject - ATI - <false/> - Graphics - Inject - Intel - <true/> - Graphics - ig-platform-id - 0x01660003 - KernelAndKextPatches - AsusAICPUPM - <true/>   Importante: Renomeie "#Inject" para "Inject" e "#ig-platform-id" para "ig-platform-id".   Obs.: Vou deixar em anexo meu config.plist.   Agora você vai precisar dessas duas Kexts:
       
      - Baixar a kext Smart Touchpad. Eu usei a versão 4.6.
      - Baixar o dmg do HWSensors e utilizar a FakeSMC.kext de dentro. Eu usei a versão 6.20.1410. Isso é muito importante. Não dá pra dar boot sem ele.
      - Coloque essas Kexts dentro de /EFI/CLOVER/kexts/10.11/
      - Coloque o instalador do Clover dentro do pendrive também.
       
      Agora você pode iniciar a inalação sem problema (eu acho).
       
       
      Configuração do Setup da BIOS e Instalação
       
      - Desligue o ultrabook e insira o pendrive.
      - Ligue com a tecla F2 apertada para entrar no Setup da BIOS.
      - Vá para "Save & Exit" e selecione "Restore Defaults".
      - Vá para aba "Advanced" e altere esses valores:
      - Intel Virtualization Technology: Disabled
      - VT-d: Disabled
      - USB Configuration - XHCI Pre-Boot Mode: Disabled
      - Vá para "Save & Exit" novamente e selecione "Save Changes".
      - Agora na seção "Boot Override" selecione o pendrive que vai estar com onome começando com UEFI. No meu caso "UEFI: KingstonDataTraveler 2.0PMAP".
      - O menu do Clover vai aparecer. Use as setas do teclado para selecionar o pendrive. Vai até a opção com o nome de "Boot OS X Install from Install OS X El Capitan", então aperter Enter.
      - Se você fez tudo corretamente, sua instalação vai inciar. Lembre-se: Formatar o HDD ou SSD com partição GUID.
      - Isso vai levar cerca de 20 minutos.
      - Depois da instalação da primeira parte o sistema vai reiniciar. Você precisa segurar o botão ESC para entrar no menu de Boot quando aparecer a logo da Asus.
      - Selecione o pendrive novamente.
      - No menu do Clover, aperte Enter em "Boot OS X Install from Install OS X El Capitan" mais uma vez.
      - A segunda parte da instalação vai começar. Isso leva cerca de 16 minutos.
       
      Pós instalação
       
      - Quando a segunda parte da instalação acabar, o sistema vai reiniciar novamente.
      - Após realizar a configuração inicial de usuário e ir para a área de trabalho, você precisará instalar o Clover no disco interno.
      - Abra o instalador do Clover dentro do pendrive que você copiou anteriormente.
      - Use as mesmas opções acima mas dessa vez escolha o a partição do sistema.
      - Agora você precisa substituir a pasta EFI de dentro da partição EFI do disco interno com a pasta EFI da partição EFI do pendrive.
      - A partição EFI do pendrive não vai estar montada. Monde com "diskutil mount /dev/rdiskXs1". Para saber qual é o X, use "diskutil list", mas provavelmente será 1.
      - Agora reinicie o sistema. Você vai precisar apertar ESC para entrar no menu de Boot quando aparecer a logo da Asus.
      - Selecione o pendrive novamente.
      - No menu do Clove, use as setas do teclado e vá para a última opção com nome "Clover Boot Options" e aperte Espaço. - Selecione a opção "Add Clover boot options for all entries".
      - Desligue, remova o pendrive e ligue.
      - Se você fez tudo corretamente, o sistema vai iniciar normalmente.
       
      Outras Kexts:
       
      Baixe as kexts nos links abaixo. Eu recomendo fortemente sempre usar versões mais novas. Se você estiver com preguiça, eu anexei no final desse post.
       
      Rede: AtherosE2200Ethernet 2.1.0
      Som: VoodooHDA 2.8.8 (use o arquivo PKG). Você precisa selecionar a saída nas Preferências do Sistemas após reiniciar.
      Bateria: ACPIBatteryManager by RehabMan (versão 2016-0531). Você precisa do path DSDT (abaixo).
      Bluetooth: Bluetooth Firmware Uploader (versão 3.1).
      Câmera integrada: AnyiSightCam
       
      Todas as kexts devem ser colocadas em /EFI/CLOVER/kexts/10.11/, monde essa partição novamente (diskutil mount /dev/rdiskXs1) pra isso.
       
      Teclas FN:
      Abra "ApplePS2SmartTouchPad.kext/Contents/Plugins/ApplePS2Keyboard.kext/Contents/Info.plist" e altere:
      <key>Fn keys Layout</key> <string>NONE</string> <key>Fn keys Mode</key> <integer>2</integer> Para:
      <key>Fn keys Layout</key> <string>ASUS</string> <key>Fn keys Mode</key> <integer>3</integer>   Correção do segundo estágio de boot:
      Adicionar em /EFI/CLOVER/config.plist dentro de KextsToPatch
      <dict> <key>Comment</key> <string>HD 4000 Logo Fix</string> <key>Find</key> <data> AQAAdRc= </data> <key>Name</key> <string>IOGraphicsFamily</string> <key>Replace</key> <data> AQAA6xc= </data> </dict> Path DSDT da bateria:
      #Maintained by: RehabMan for: Laptop Patches #battery_ASUS-N55SL.txt # created by RehabMan 8/12/2013 # created originally for jesselid # works for: # ASUS N55SL, BIOS rev. 204 # ASUS VivoBook series # ASUS Zenbook UX31A # ASUS UX301LA # ASUS X553E-SX399V # ASUS F501A # ASUS K55VM # ASUS U46SV, BIOS rev. 2.04 # ASUS N43 # ASUS PU500CA (90NB00F1-M01120) # ASUS N73SV # ASUS X401A-WX108 # ASUS F551CA Bios rev. 207 # ASUS S551LB VivoBook # ASUS ZenBook UX32VD # ASUS F550L-X455H # ASUS X53S # ASUS K550JD-XX003H # ASUS G53SX # ASUS K56CB # ASUS UX305 into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # not really for battery, but might come in handy to read fan speed(s) into device label EC0 code_regex TAH0,\s+16 replace_matched begin TH00,8,TH01,8 end; into device label EC0 code_regex TAH1,\s+16 replace_matched begin TH10,8,TH11,8 end; into method label TACH code_regex \(TAH0, replace_matched begin (B1B2(TH00,TH01), end; into method label TACH code_regex \(TAH1, replace_matched begin (B1B2(TH10,TH11), end; into method label GFAN code_regex \(\\_SB\.PCI0\.LPCB\.EC0\.TAH0, replace_matched begin (B1B2(\\_SB.PCI0.LPCB.EC0.TH00,\\_SB.PCI0.LPCB.EC0.TH01), end; # battery EC into device label EC0 code_regex B0SN,\s+16 replace_matched begin B0S0,8,B0S1,8 end; into device label EC0 code_regex B1SN,\s+16 replace_matched begin B1S0,8,B1S1,8 end; into method label BIFA code_regex \(B0SN, replace_matched begin (B1B2(B0S0,B0S1), end; into method label BIFA code_regex \(B1SN, replace_matched begin (B1B2(B1S0,B1S1), end; into device label EC0 code_regex DT2B,\s+16 replace_matched begin T2B0,8,T2B1,8 end; into method label SMBR code_regex \(DT2B, replace_matched begin (B1B2(T2B0,T2B1), end; into method label SMBW code_regex Store\s+\(([^,]*),\s+DT2B\) replace_matched begin Store(%1,T2B0) Store(ShiftRight(%1,8),T2B1) end; into device label EC0 insert begin Method (RDBA, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BA00, Index(TEMP, 0x00))\n Store (BA01, Index(TEMP, 0x01))\n Store (BA02, Index(TEMP, 0x02))\n Store (BA03, Index(TEMP, 0x03))\n Store (BA04, Index(TEMP, 0x04))\n Store (BA05, Index(TEMP, 0x05))\n Store (BA06, Index(TEMP, 0x06))\n Store (BA07, Index(TEMP, 0x07))\n Store (BA08, Index(TEMP, 0x08))\n Store (BA09, Index(TEMP, 0x09))\n Store (BA0A, Index(TEMP, 0x0A))\n Store (BA0B, Index(TEMP, 0x0B))\n Store (BA0C, Index(TEMP, 0x0C))\n Store (BA0D, Index(TEMP, 0x0D))\n Store (BA0E, Index(TEMP, 0x0E))\n Store (BA0F, Index(TEMP, 0x0F))\n Store (BA10, Index(TEMP, 0x10))\n Store (BA11, Index(TEMP, 0x11))\n Store (BA12, Index(TEMP, 0x12))\n Store (BA13, Index(TEMP, 0x13))\n Store (BA14, Index(TEMP, 0x14))\n Store (BA15, Index(TEMP, 0x15))\n Store (BA16, Index(TEMP, 0x16))\n Store (BA17, Index(TEMP, 0x17))\n Store (BA18, Index(TEMP, 0x18))\n Store (BA19, Index(TEMP, 0x19))\n Store (BA1A, Index(TEMP, 0x1A))\n Store (BA1B, Index(TEMP, 0x1B))\n Store (BA1C, Index(TEMP, 0x1C))\n Store (BA1D, Index(TEMP, 0x1D))\n Store (BA1E, Index(TEMP, 0x1E))\n Store (BA1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBA, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BA00)\n Store (DerefOf(Index(TEMP, 0x01)), BA01)\n Store (DerefOf(Index(TEMP, 0x02)), BA02)\n Store (DerefOf(Index(TEMP, 0x03)), BA03)\n Store (DerefOf(Index(TEMP, 0x04)), BA04)\n Store (DerefOf(Index(TEMP, 0x05)), BA05)\n Store (DerefOf(Index(TEMP, 0x06)), BA06)\n Store (DerefOf(Index(TEMP, 0x07)), BA07)\n Store (DerefOf(Index(TEMP, 0x08)), BA08)\n Store (DerefOf(Index(TEMP, 0x09)), BA09)\n Store (DerefOf(Index(TEMP, 0x0A)), BA0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BA0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BA0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BA0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BA0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BA0F)\n Store (DerefOf(Index(TEMP, 0x10)), BA10)\n Store (DerefOf(Index(TEMP, 0x11)), BA11)\n Store (DerefOf(Index(TEMP, 0x12)), BA12)\n Store (DerefOf(Index(TEMP, 0x13)), BA13)\n Store (DerefOf(Index(TEMP, 0x14)), BA14)\n Store (DerefOf(Index(TEMP, 0x15)), BA15)\n Store (DerefOf(Index(TEMP, 0x16)), BA16)\n Store (DerefOf(Index(TEMP, 0x17)), BA17)\n Store (DerefOf(Index(TEMP, 0x18)), BA18)\n Store (DerefOf(Index(TEMP, 0x19)), BA19)\n Store (DerefOf(Index(TEMP, 0x1A)), BA1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BA1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BA1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BA1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BA1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BA1F)\n }\n end; into device label EC0 code_regex BDAT,\s+256 replace_matched begin //BDAT, 256,\n BA00,8,BA01,8,BA02,8,BA03,8,\n BA04,8,BA05,8,BA06,8,BA07,8,\n BA08,8,BA09,8,BA0A,8,BA0B,8,\n BA0C,8,BA0D,8,BA0E,8,BA0F,8,\n BA10,8,BA11,8,BA12,8,BA13,8,\n BA14,8,BA15,8,BA16,8,BA17,8,\n BA18,8,BA19,8,BA1A,8,BA1B,8,\n BA1C,8,BA1D,8,BA1E,8,BA1F,8\n end; into method label SMBR code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into method label SMBR code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into device label EC0 insert begin Method (RDBB, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BB00, Index(TEMP, 0x00))\n Store (BB01, Index(TEMP, 0x01))\n Store (BB02, Index(TEMP, 0x02))\n Store (BB03, Index(TEMP, 0x03))\n Store (BB04, Index(TEMP, 0x04))\n Store (BB05, Index(TEMP, 0x05))\n Store (BB06, Index(TEMP, 0x06))\n Store (BB07, Index(TEMP, 0x07))\n Store (BB08, Index(TEMP, 0x08))\n Store (BB09, Index(TEMP, 0x09))\n Store (BB0A, Index(TEMP, 0x0A))\n Store (BB0B, Index(TEMP, 0x0B))\n Store (BB0C, Index(TEMP, 0x0C))\n Store (BB0D, Index(TEMP, 0x0D))\n Store (BB0E, Index(TEMP, 0x0E))\n Store (BB0F, Index(TEMP, 0x0F))\n Store (BB10, Index(TEMP, 0x10))\n Store (BB11, Index(TEMP, 0x11))\n Store (BB12, Index(TEMP, 0x12))\n Store (BB13, Index(TEMP, 0x13))\n Store (BB14, Index(TEMP, 0x14))\n Store (BB15, Index(TEMP, 0x15))\n Store (BB16, Index(TEMP, 0x16))\n Store (BB17, Index(TEMP, 0x17))\n Store (BB18, Index(TEMP, 0x18))\n Store (BB19, Index(TEMP, 0x19))\n Store (BB1A, Index(TEMP, 0x1A))\n Store (BB1B, Index(TEMP, 0x1B))\n Store (BB1C, Index(TEMP, 0x1C))\n Store (BB1D, Index(TEMP, 0x1D))\n Store (BB1E, Index(TEMP, 0x1E))\n Store (BB1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBB, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BB00)\n Store (DerefOf(Index(TEMP, 0x01)), BB01)\n Store (DerefOf(Index(TEMP, 0x02)), BB02)\n Store (DerefOf(Index(TEMP, 0x03)), BB03)\n Store (DerefOf(Index(TEMP, 0x04)), BB04)\n Store (DerefOf(Index(TEMP, 0x05)), BB05)\n Store (DerefOf(Index(TEMP, 0x06)), BB06)\n Store (DerefOf(Index(TEMP, 0x07)), BB07)\n Store (DerefOf(Index(TEMP, 0x08)), BB08)\n Store (DerefOf(Index(TEMP, 0x09)), BB09)\n Store (DerefOf(Index(TEMP, 0x0A)), BB0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BB0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BB0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BB0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BB0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BB0F)\n Store (DerefOf(Index(TEMP, 0x10)), BB10)\n Store (DerefOf(Index(TEMP, 0x11)), BB11)\n Store (DerefOf(Index(TEMP, 0x12)), BB12)\n Store (DerefOf(Index(TEMP, 0x13)), BB13)\n Store (DerefOf(Index(TEMP, 0x14)), BB14)\n Store (DerefOf(Index(TEMP, 0x15)), BB15)\n Store (DerefOf(Index(TEMP, 0x16)), BB16)\n Store (DerefOf(Index(TEMP, 0x17)), BB17)\n Store (DerefOf(Index(TEMP, 0x18)), BB18)\n Store (DerefOf(Index(TEMP, 0x19)), BB19)\n Store (DerefOf(Index(TEMP, 0x1A)), BB1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BB1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BB1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BB1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BB1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BB1F)\n }\n end; into device label EC0 code_regex BDA2,\s+256 replace_matched begin //BDA2, 256,\n BB00,8,BB01,8,BB02,8,BB03,8,\n BB04,8,BB05,8,BB06,8,BB07,8,\n BB08,8,BB09,8,BB0A,8,BB0B,8,\n BB0C,8,BB0D,8,BB0E,8,BB0F,8,\n BB10,8,BB11,8,BB12,8,BB13,8,\n BB14,8,BB15,8,BB16,8,BB17,8,\n BB18,8,BB19,8,BB1A,8,BB1B,8,\n BB1C,8,BB1D,8,BB1E,8,BB1F,8\n end; into method label SMBR code_regex \(BDA2, replaceall_matched begin (RDBB(), end; into method label SMBR code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex \(BDA2, replaceall_matched begin (RDBB(), end; # additional work for _BIX method present in some ASUS laptops into device label EC0 code_regex B0C3,\s+16 replace_matched begin XC30,8,XC31,8 end; into device label EC0 code_regex B1C3,\s+16 replace_matched begin YC30,8,YC31,8 end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B0C3, replaceall_matched begin (B1B2(^^LPCB.EC0.XC30,^^LPCB.EC0.XC31), end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B1C3, replaceall_matched begin (B1B2(^^LPCB.EC0.YC30,^^LPCB.EC0.YC31), end; # or could remove the _BIX method if it turns out not to work #into_all method label _BIX remove_entry; Path do brilho
      #Maintained by: RehabMan for: Laptop Patches #graphics_PNLF_ivy_sandy.txt # This patch enables the brightness slider in SysPrefs->Displays # and will also enable activation of sleep mode by closing # the laptop lid. # # This particular version is intended to be used with ACPIBacklight.kext # although it can also be used with AppleBacklight.kext, # provided AppleBacklight.kext is patched to recognize your # display or an injector is used to set brightness levels. # # See this thread for more information: # http://www.tonymacx86.com/hp-probook-mavericks/121031-native-brightness-working-without-blinkscreen-using-patched-applebacklight-kext.html # (also read any linked threads) # # # Note: This patch should be applied to the DSDT or SSDT that defines # your integrated graphics device (always at _ADR 0x00020000) # into_all device label PNLF remove_entry; into_all device name_adr 0x00020000 code_regex (OperationRegion\s\(RMPC,\sPCI_Config[^\}]*\}) remove_matched; into device name_adr 0x00020000 insert begin OperationRegion (RMPC, PCI_Config, 0x10, 4)\n Field (RMPC, AnyAcc, NoLock, Preserve)\n {\n BAR1,32,\n }\n Device (PNLF)\n {\n // normal PNLF declares (note some of this probably not necessary)\n Name (_ADR, Zero)\n Name (_HID, EisaId ("APP0002"))\n Name (_CID, "backlight")\n Name (_UID, 10)\n Name (_STA, 0x0B)\n //define hardware register access for brightness\n // lower nibble of BAR1 is status bits and not part of the address\n OperationRegion (BRIT, SystemMemory, And(^BAR1, Not(0xF)), 0xe1184)\n Field (BRIT, AnyAcc, Lock, Preserve)\n {\n Offset(0x48250),\n LEV2, 32,\n LEVL, 32,\n Offset(0x70040),\n P0BL, 32,\n Offset(0xc8250),\n LEVW, 32,\n LEVX, 32,\n Offset(0xe1180),\n PCHL, 32,\n }\n // DEB1 special for setting KLVX at runtime...\n //Method (DEB1, 1, NotSerialized)\n //{\n // Store(Arg0, KLVX)\n //}\n // LMAX: use 0x710 to force OS X value\n // or use any arbitrary value\n // or use 0 to capture BIOS setting\n Name (LMAX, 0x710)\n // KMAX: defines the unscaled range in the _BCL table below\n Name (KMAX, 0x710)\n // KPCH: saved value for PCHL\n Name(KPCH, 0)\n // _INI deals with differences between native setting and desired\n Method (_INI, 0, NotSerialized)\n {\n // save value of PCHL for later\n Store(PCHL, KPCH)\n // determine LMAX to use\n If (LNot(LMAX)) { Store(ShiftRight(LEVX,16), LMAX) }\n If (LNot(LMAX)) { Store(KMAX, LMAX) }\n Store(ShiftLeft(LMAX,16), KLVX)\n If (LNotEqual(LMAX, KMAX))\n {\n // Scale all the values in _BCL to the PWM max in use\n Store(0, Local0)\n While (LLess(Local0, SizeOf(_BCL)))\n {\n Store(DerefOf(Index(_BCL,Local0)), Local1)\n Divide(Multiply(Local1,LMAX), KMAX,, Local1)\n Store(Local1, Index(_BCL,Local0))\n Increment(Local0)\n }\n // Also scale XRGL and XRGH values\n Divide(Multiply(XRGL,LMAX), KMAX,, XRGL)\n Divide(Multiply(XRGH,LMAX), KMAX,, XRGH)\n }\n // adjust values to desired LMAX\n Store(ShiftRight(LEVX,16), Local1)\n If (LNotEqual(Local1, LMAX))\n {\n Store(LEVL, Local0)\n If (LOr(LNot(Local0),LNot(Local1))) { Store(LMAX, Local0) Store(LMAX, Local1) }\n Divide(Multiply(Local0,LMAX), Local1,, Local0)\n //REVIEW: wait for vblank before setting new PWM config\n //Store(P0BL, Local7)\n //While (LEqual (P0BL, Local7)) {}\n If (LGreater(LEVL, LMAX))\n { Store(KLVX, LEVX) Store(Local0, LEVL) }\n Else\n { Store(Local0, LEVL) Store(KLVX, LEVX) }\n }\n }\n // _BCM/_BQC: set/get for brightness level\n Method (_BCM, 1, NotSerialized)\n {\n // initialize for consistent backlight level before/after sleep\n If (LNotEqual(PCHL, KPCH)) { Store(KPCH, PCHL) }\n If (LNotEqual(LEVW, 0x80000000)) { Store (0x80000000, LEVW) }\n If (LNotEqual(LEVX, KLVX)) { Store (KLVX, LEVX) }\n // store new backlight level\n Store(Match(_BCL, MGE, Arg0, MTR, 0, 2), Local0)\n If (LEqual(Local0, Ones)) { Subtract(SizeOf(_BCL), 1, Local0) }\n If (LNotEqual(LEV2, 0x80000000)) { Store(0x80000000, LEV2) }\n Store(DerefOf(Index(_BCL, Local0)), LEVL)\n }\n Method (_BQC, 0, NotSerialized)\n {\n Store(Match(_BCL, MGE, LEVL, MTR, 0, 2), Local0)\n If (LEqual(Local0, Ones)) { Subtract(SizeOf(_BCL), 1, Local0) }\n Return(DerefOf(Index(_BCL, Local0)))\n }\n Method (_DOS, 1, NotSerialized)\n {\n // Note: Some systems have this defined in DSDT, so uncomment\n // the next line if that is the case.\n //External(^^_DOS, MethodObj)\n ^^_DOS(Arg0)\n }\n // extended _BCM/_BQC for setting "in between" levels\n Method (XBCM, 1, NotSerialized)\n {\n // initialize for consistent backlight level before/after sleep\n If (LNotEqual(PCHL, KPCH)) { Store(KPCH, PCHL) }\n If (LNotEqual(LEVW, 0x80000000)) { Store (0x80000000, LEVW) }\n If (LNotEqual(LEVX, KLVX)) { Store (KLVX, LEVX) }\n // store new backlight level\n If (LGreater(Arg0, XRGH)) { Store(XRGH, Arg0) }\n If (LAnd(Arg0, LLess(Arg0, XRGL))) { Store(XRGL, Arg0) }\n If (LNotEqual(LEV2, 0x80000000)) { Store(0x80000000, LEV2) } \n Store(Arg0, LEVL)\n }\n Method (XBQC, 0, NotSerialized)\n {\n Store(LEVL, Local0)\n If (LGreater(Local0, XRGH)) { Store(XRGH, Local0) }\n If (LAnd(Local0, LLess(Local0, XRGL))) { Store(XRGL, Local0) }\n Return(Local0)\n }\n // Use XOPT=1 to disable smooth transitions\n Name (XOPT, Zero)\n // XRGL/XRGH: defines the valid range\n Name (XRGL, 40)\n Name (XRGH, 1808)\n // KLVX is initialization value for LEVX\n Name (KLVX, 0x7100000)\n // _BCL: returns list of valid brightness levels\n // first two entries describe ac/battery power levels\n Name (_BCL, Package()\n {\n 1808,\n 479,\n 0,\n 53, 55, 57, 59,\n 62, 66, 71, 77,\n 83, 91, 99, 108,\n 119, 130, 142, 154,\n 168, 183, 198, 214,\n 232, 250, 269, 289,\n 309, 331, 354, 377,\n 401, 426, 453, 479,\n 507, 536, 566, 596,\n 627, 660, 693, 727,\n 762, 797, 834, 872,\n 910, 949, 990, 1031,\n 1073, 1115, 1159, 1204,\n 1249, 1296, 1343, 1391,\n 1440, 1490, 1541, 1592,\n 1645, 1698, 1753, 1808,\n })\n }\n end; Está pronto!
       
       
      Em anexo arquivos utilizados na instalação. Pelo amor de deus, sempre use versões mais novas.
       
       
      E por último mas não menos importante
       
      Eu gostaria de agradecer os seguintes membros da comunidade, por tornar esse sonho possível:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas e todos os outros membros envolvidos direta ou indiretamente.
      EFI antes instalação.zip
      EFI após instalação.zip
    • By ludufre
      New guide available for macOS Catalina 10.15 (i3 and i5 versions)!
       
       
       
      Installing OS X El Capitan 10.11.5 on ASUS VivoBook S400C (also know as S400CA)
      Specifically in S400CA-CA178H model, most likely all other models are compatible
       
        
       

      Updated 22/11/17 #1:
       
      - High Sierra 10.13.1 on ASUS Vivobook S400C (S400CA-CA178H).
       
       
      Updated 27/06/16 #1:
       
      - Altered Brightness to fix with Clover <KextsToPatch> method.
       
      - Added Kexts to fix USB port injection (FakePCIID.kext, FakePCIID_XHCIMux.kext and USB.kext).
      - Touch Screen was missing from the list. Added and now works.
      - Sleep now works after DSDT patch
      - Card Reader now works too
      - Created section about DSDT and Todo list
      - Added missing patchs
      - Updated BIOS config list before install.
       
      Updated 26/06/16 #1:
       
      - Added patch in <KextsToPatch> in Clover config.plist to fix 2nd Stage Boot logo. (not in attachments)
       
       
      What works and what does not work
       
      - Processor ->  Work. i5-3317U @ 1.7Ghz/2.6Ghz.  SpeedStep 8 to 26 stages. AsusAICPUPM <true/> in Clover config.plist. 
      - Video Card ->  Work. HD4000. Full QE/CI.
      - Chipset ->  Work.
      - HDMI ->  Work.
      - VGA ->  Not work.
      - Audio ->  Work. VoodooHDA 2.8.8 (use PKG file).
      - WiFi ->  Work. Replaced by Athero 9285 Wifi/Bluetooth (https://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Daps&field-keywords=atheros+9285).
      - Ethernet ->  Work. AtherosE2200Ethernet 2.1.0.
      - Keyboard and touchpad ->  Work. ELAN, FocalTech and Synaptics (Smart Touchpad) Driver (Mac OS X) (version 4.6).
      - FN keyboards keys ->  Work. Changed FN keys layout inside ELAN kext above.
      - Brightness control ->  Work. Clover <KextsToPatch> below.
      - Touchscreen ->  Work. USB port inject kext in attachment.
      - Sleep ->  Work. DSDT patch (below) and <HighCurrent> set to <true/> in Clover.
      - Battery ->  Work. ACPIBatteryManager by RehabMan (version 2016-0531) and DSDT patch (below).
      - Card Reader ->  Work. USB port inject kext in attachment.
      - Integrated Camera ->  Work. AnyiSightCam.
      - Bluetooth ->  Work. Bluetooth Firmware Uploader (version 3.1).
      - 2nd stage boot logo ->  Work. Clover <KextsToPatch> below.

       
       
      What you need to install
       


      - Running install of El Capitan on VMware -> Downloaded version 10.11 via torrent (search by "10.11 vmware" torrent). You can use a real Mac of an friend. My method only works on Mavericks (10.9) and above.
      - One USB flash drive of 8GB or bigger.
      - OS X El Capitan install app -> Downloaded via App Store inside the virtual machine. Downloaded version 10.11.5.
      - CloverEFI -> Also download inside the virtual machine. I used build 3577.
      - DSDT patch skills -> Needed to battery works. How to patch DSDT. Or you can download mine DSDT below, but would not recommend.

       
       
      How create the flash drive
       
      Creating the install:
       
      Format the flash drive with GUID partition mapping and name it "Install"
       
      Open terminal and run this command:
       
       
       
       
      This will take about 30 minutes.

      Installing bootloader:
       
      Download the CloverEFI (used 3577) and install with this options on "Install OS X El Capitan":

      Options:
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - Drivers64UEFI - CsmVideoDxe-64
      - Drivers64UEFI - OsxAptioFixDrv-64
       
      Will be created a partition named EFI. Edit the /EFI/CLOVER/config.plist and change those values:
       
      - Graphics - Inject - ATI - <false/>
      - Graphics - Inject - Intel - <true/>
      - Graphics - ig-platform-id - 0x01660003
      - KernelAndKextPatches - AsusAICPUPM - <true/>
       
      Important: Rename "#Inject" to "Inject" and "#ig-platform-id" to "ig-platform-id".
       
      P.s.: I will provide below my config.plist as attachment.
       

      Now you will need two Kexts:
       
      - Download the Smart Touchpad kext from here. I used the version 4.6.
      - Download the HWSensors dmg and use the FakeSMC.kext from inside. I used the version 6.20.1410. This is very important. Can't boot without it.
      - Put these Kexts inside /EFI/CLOVER/kexts/10.11/
      - Put the Clover installer on the flash drive too.

       
      Now you can start the instalation without problem (I guess).
       
       
      BIOS Setup Configuration and Installation
       
      - Shutdown the ultrabook and insert the flash drive.
      - Power on with F2 pressed to enter BIOS setup.
      - Go to "Save & Exit" and press "Restore Defaults".
      - Go to "Advanced" tab and change these values:
       
      - VT-d: Disabled
      - Go to "Save & Exit" again and select "Save Changes".
      - Now in "Boot Override" section select the flash drive named with UEFI prefix. In my case "UEFI: KingstonDataTraveler 2.0PMAP".
      - The clover menu will show. Use the arrow keys to mark the flash drive. The option name is "Boot OS X Install from Install OS X El Capitan", then press Enter.
      - If you did everything correctly, you can start the installation. Remember: Format the HDD or SSD with GUID partition mapping.
      - This will take about 20 minutes.
      - After first part install the system will reboot. You need to press ESC to enter Boot menu when Asus logo appear.
      - Select the flash drive again.
      - In Clover main menu, press enter in "Boot OS X Install from Install OS X El Capitan" once again.
      - The second part of the installation will begin. This will take 16 minutes.
       
       
      Post installation
       
      - When the second part of install finish, the system will reboot again.
      - After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.
      - Open the Clover installer inside flash drive that you copied before.
      - Use same options above but choose the system partition this time.
      - Now you need to replace the EFI folder inside your internal disk EFI parittion with EFI folder inside flash card EFI partition.
      - The flash drive EFI partition is unmounted. Mount with "diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 1.
      - Now restart the system. You need to press ESC to enter Boot menu when Asus logo appear.
      - Select the flash drive again.
      - In Clover menu, use arrows and go to the last option with name "Clover Boot Options" and press Space.
      - Select the option "Add Clover boot options for all entries".
      - Shutdown, remove the flash drive and power on.
      - If you do everything wright, the system will start normally.
       
      Others Kexts:
       
      Download the kexts from the links below. I strongly recommend always use newest versions. If you are too lazy, I attach on end of the post.
       
      Ethernet: AtherosE2200Ethernet 2.1.0
      Sound: VoodooHDA 2.8.8 (use PKG file). You need to select the output there in System Preferences after reboot.
      Battery: ACPIBatteryManager by RehabMan (version 2016-0531). You need to path DSDT (below).
      Bluetooth: Bluetooth Firmware Uploader (version 3.1).
      Integrated Camera: AnyiSightCam
      USB Port Injector: FakePCIID and FakePCIID_XHCIMux (version 2016-0512) and USB.kext attached below.
       
      All kexts will placed inside /EFI/CLOVER/kexts/10.11/, mount again this partition (diskutil mount /dev/rdiskXs1) for it.
       
       
      Fine Adjustiment
       
      Prevent eject when sleep
      Open "/EFI/CLOVER/config.plist" and change:
       
       
      <key>HighCurrent</key> <false/> To:
       
      <key>HighCurrent</key> <true/>  Enable FN keys
      Open "ApplePS2SmartTouchPad.kext/Contents/Plugins/ApplePS2Keyboard.kext/Contents/Info.plist" and change:
       
      <key>Fn keys Layout</key> <string>NONE</string> <key>Fn keys Mode</key> <integer>2</integer> To:
       
      <key>Fn keys Layout</key> <string>ASUS</string> <key>Fn keys Mode</key> <integer>3</integer>  Second stage boot logo fix
      Add in /EFI/CLOVER/config.plist inside KextsToPatch.
       
      <dict> <key>Comment</key> <string>HD 4000 Logo Fix</string> <key>Find</key> <data> AQAAdRc= </data> <key>Name</key> <string>IOGraphicsFamily</string> <key>Replace</key> <data> AQAA6xc= </data> </dict> Brightness fix
      Add in /EFI/CLOVER/config.plist inside KextsToPatch.
       
      <dict> <key>Comment</key> <string>HD 4000 brightness fix</string> <key>Find</key> <data> EAcAABAHAAA= </data> <key>Name</key> <string>AppleIntelFramebufferCapri</string> <key>Replace</key> <data> EhMAABITAAA= </data> </dict> DSDT Patchs
       
      First of all, extract your system DSDT.aml pressioning F4 on Clover boot menu. Will be stored in /EFI/CLOVER/ACPI/origin.
      Copy to /EFI/CLOVER/ACPI/patched and apply following patchs using MaciASL:
       
      Fix *pnp/pnp lower case Error
       
      #Maintained by: RehabMan for: Laptop Patches #fix_HID_pnp.txt # To fix Name(_HID, "*pnpXXXX") and Name(_HID, "pnpXXXX") into_all all code_regex (Name\s+\(_HID,\s+\")\*pnp(.*\") replaceall_matched begin %1PNP%2 end; into_all all code_regex (Name\s+\(_HID,\s+\")pnp(.*\") replaceall_matched begin %1PNP%2 end; Rename GFX0 to IGPU
       
      #Maintained by: RehabMan for: Laptop Patches #graphics_Rename-GFX0.txt # Note: Most DSDT/SSDTs use GFX0 for the integrated graphics device, # but there are few renegades that use VID or AGP1. # If your DSDT uses VID or AGP1 instead of GFX0, see the # alternate patch "Rename VID/AGP1 to IGPU" # sometimes there is already IGPU used for other things into_all all code_regex IGPU, replaceall_matched begin IGFX, end; # rename GFX0 -> IGPU for better power management into_all all code_regex GFX0\. replaceall_matched begin IGPU. end; into_all all code_regex \.GFX0 replaceall_matched begin .IGPU end; into_all all code_regex \sGFX0, replaceall_matched begin IGPU, end; into_all all code_regex \(GFX0 replaceall_matched begin (IGPU end; into_all all label GFX0 set_label begin IGPU end; into_all all label _SB.PCI0.GFX0 set_label begin _SB.PCI0.IGPU end; into_all all label \_SB.PCI0.GFX0 set_label begin \_SB.PCI0.IGPU end; into_all all label _SB.PCI0.GFX0.DD02 set_label begin _SB.PCI0.IGPU.DD02 end; into_all all label \_SB.PCI0.GFX0.DD02 set_label begin \_SB.PCI0.IGPU.DD02 end; into_all all label ^^^GFX0 set_label begin ^^^IGPU end; into_all all label ^^GFX0 set_label begin ^^IGPU end; into_all all label ^GFX0 set_label begin ^IGPU end; Battery (ASUS N55LS/Vivobook)
       
      #Maintained by: RehabMan for: Laptop Patches #battery_ASUS-N55SL.txt # created by RehabMan 8/12/2013 # created originally for jesselid # works for: # ASUS N55SL, BIOS rev. 204 # ASUS VivoBook series # ASUS Zenbook UX31A # ASUS UX301LA # ASUS X553E-SX399V # ASUS F501A # ASUS K55VM # ASUS U46SV, BIOS rev. 2.04 # ASUS N43 # ASUS PU500CA (90NB00F1-M01120) # ASUS N73SV # ASUS X401A-WX108 # ASUS F551CA Bios rev. 207 # ASUS S551LB VivoBook # ASUS ZenBook UX32VD # ASUS F550L-X455H # ASUS X53S # ASUS K550JD-XX003H # ASUS G53SX # ASUS K56CB # ASUS UX305 into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # not really for battery, but might come in handy to read fan speed(s) into device label EC0 code_regex TAH0,\s+16 replace_matched begin TH00,8,TH01,8 end; into device label EC0 code_regex TAH1,\s+16 replace_matched begin TH10,8,TH11,8 end; into method label TACH code_regex \(TAH0, replace_matched begin (B1B2(TH00,TH01), end; into method label TACH code_regex \(TAH1, replace_matched begin (B1B2(TH10,TH11), end; into method label GFAN code_regex \(\\_SB\.PCI0\.LPCB\.EC0\.TAH0, replace_matched begin (B1B2(\\_SB.PCI0.LPCB.EC0.TH00,\\_SB.PCI0.LPCB.EC0.TH01), end; # battery EC into device label EC0 code_regex B0SN,\s+16 replace_matched begin B0S0,8,B0S1,8 end; into device label EC0 code_regex B1SN,\s+16 replace_matched begin B1S0,8,B1S1,8 end; into method label BIFA code_regex \(B0SN, replace_matched begin (B1B2(B0S0,B0S1), end; into method label BIFA code_regex \(B1SN, replace_matched begin (B1B2(B1S0,B1S1), end; into device label EC0 code_regex DT2B,\s+16 replace_matched begin T2B0,8,T2B1,8 end; into method label SMBR code_regex \(DT2B, replace_matched begin (B1B2(T2B0,T2B1), end; into method label SMBW code_regex Store\s+\(([^,]*),\s+DT2B\) replace_matched begin Store(%1,T2B0) Store(ShiftRight(%1,8),T2B1) end; into device label EC0 insert begin Method (RDBA, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BA00, Index(TEMP, 0x00))\n Store (BA01, Index(TEMP, 0x01))\n Store (BA02, Index(TEMP, 0x02))\n Store (BA03, Index(TEMP, 0x03))\n Store (BA04, Index(TEMP, 0x04))\n Store (BA05, Index(TEMP, 0x05))\n Store (BA06, Index(TEMP, 0x06))\n Store (BA07, Index(TEMP, 0x07))\n Store (BA08, Index(TEMP, 0x08))\n Store (BA09, Index(TEMP, 0x09))\n Store (BA0A, Index(TEMP, 0x0A))\n Store (BA0B, Index(TEMP, 0x0B))\n Store (BA0C, Index(TEMP, 0x0C))\n Store (BA0D, Index(TEMP, 0x0D))\n Store (BA0E, Index(TEMP, 0x0E))\n Store (BA0F, Index(TEMP, 0x0F))\n Store (BA10, Index(TEMP, 0x10))\n Store (BA11, Index(TEMP, 0x11))\n Store (BA12, Index(TEMP, 0x12))\n Store (BA13, Index(TEMP, 0x13))\n Store (BA14, Index(TEMP, 0x14))\n Store (BA15, Index(TEMP, 0x15))\n Store (BA16, Index(TEMP, 0x16))\n Store (BA17, Index(TEMP, 0x17))\n Store (BA18, Index(TEMP, 0x18))\n Store (BA19, Index(TEMP, 0x19))\n Store (BA1A, Index(TEMP, 0x1A))\n Store (BA1B, Index(TEMP, 0x1B))\n Store (BA1C, Index(TEMP, 0x1C))\n Store (BA1D, Index(TEMP, 0x1D))\n Store (BA1E, Index(TEMP, 0x1E))\n Store (BA1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBA, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BA00)\n Store (DerefOf(Index(TEMP, 0x01)), BA01)\n Store (DerefOf(Index(TEMP, 0x02)), BA02)\n Store (DerefOf(Index(TEMP, 0x03)), BA03)\n Store (DerefOf(Index(TEMP, 0x04)), BA04)\n Store (DerefOf(Index(TEMP, 0x05)), BA05)\n Store (DerefOf(Index(TEMP, 0x06)), BA06)\n Store (DerefOf(Index(TEMP, 0x07)), BA07)\n Store (DerefOf(Index(TEMP, 0x08)), BA08)\n Store (DerefOf(Index(TEMP, 0x09)), BA09)\n Store (DerefOf(Index(TEMP, 0x0A)), BA0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BA0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BA0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BA0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BA0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BA0F)\n Store (DerefOf(Index(TEMP, 0x10)), BA10)\n Store (DerefOf(Index(TEMP, 0x11)), BA11)\n Store (DerefOf(Index(TEMP, 0x12)), BA12)\n Store (DerefOf(Index(TEMP, 0x13)), BA13)\n Store (DerefOf(Index(TEMP, 0x14)), BA14)\n Store (DerefOf(Index(TEMP, 0x15)), BA15)\n Store (DerefOf(Index(TEMP, 0x16)), BA16)\n Store (DerefOf(Index(TEMP, 0x17)), BA17)\n Store (DerefOf(Index(TEMP, 0x18)), BA18)\n Store (DerefOf(Index(TEMP, 0x19)), BA19)\n Store (DerefOf(Index(TEMP, 0x1A)), BA1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BA1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BA1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BA1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BA1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BA1F)\n }\n end; into device label EC0 code_regex BDAT,\s+256 replace_matched begin //BDAT, 256,\n BA00,8,BA01,8,BA02,8,BA03,8,\n BA04,8,BA05,8,BA06,8,BA07,8,\n BA08,8,BA09,8,BA0A,8,BA0B,8,\n BA0C,8,BA0D,8,BA0E,8,BA0F,8,\n BA10,8,BA11,8,BA12,8,BA13,8,\n BA14,8,BA15,8,BA16,8,BA17,8,\n BA18,8,BA19,8,BA1A,8,BA1B,8,\n BA1C,8,BA1D,8,BA1E,8,BA1F,8\n end; into method label SMBR code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into method label SMBR code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDAT\) replaceall_matched begin WRBA(%1) end; into method label ECSB code_regex \(BDAT, replaceall_matched begin (RDBA(), end; into device label EC0 insert begin Method (RDBB, 0, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (BB00, Index(TEMP, 0x00))\n Store (BB01, Index(TEMP, 0x01))\n Store (BB02, Index(TEMP, 0x02))\n Store (BB03, Index(TEMP, 0x03))\n Store (BB04, Index(TEMP, 0x04))\n Store (BB05, Index(TEMP, 0x05))\n Store (BB06, Index(TEMP, 0x06))\n Store (BB07, Index(TEMP, 0x07))\n Store (BB08, Index(TEMP, 0x08))\n Store (BB09, Index(TEMP, 0x09))\n Store (BB0A, Index(TEMP, 0x0A))\n Store (BB0B, Index(TEMP, 0x0B))\n Store (BB0C, Index(TEMP, 0x0C))\n Store (BB0D, Index(TEMP, 0x0D))\n Store (BB0E, Index(TEMP, 0x0E))\n Store (BB0F, Index(TEMP, 0x0F))\n Store (BB10, Index(TEMP, 0x10))\n Store (BB11, Index(TEMP, 0x11))\n Store (BB12, Index(TEMP, 0x12))\n Store (BB13, Index(TEMP, 0x13))\n Store (BB14, Index(TEMP, 0x14))\n Store (BB15, Index(TEMP, 0x15))\n Store (BB16, Index(TEMP, 0x16))\n Store (BB17, Index(TEMP, 0x17))\n Store (BB18, Index(TEMP, 0x18))\n Store (BB19, Index(TEMP, 0x19))\n Store (BB1A, Index(TEMP, 0x1A))\n Store (BB1B, Index(TEMP, 0x1B))\n Store (BB1C, Index(TEMP, 0x1C))\n Store (BB1D, Index(TEMP, 0x1D))\n Store (BB1E, Index(TEMP, 0x1E))\n Store (BB1F, Index(TEMP, 0x1F))\n Return (TEMP)\n }\n end; into device label EC0 insert begin Method (WRBB, 1, Serialized)\n {\n Name (TEMP, Buffer(0x20) { })\n Store (Arg0, TEMP)\n Store (DerefOf(Index(TEMP, 0x00)), BB00)\n Store (DerefOf(Index(TEMP, 0x01)), BB01)\n Store (DerefOf(Index(TEMP, 0x02)), BB02)\n Store (DerefOf(Index(TEMP, 0x03)), BB03)\n Store (DerefOf(Index(TEMP, 0x04)), BB04)\n Store (DerefOf(Index(TEMP, 0x05)), BB05)\n Store (DerefOf(Index(TEMP, 0x06)), BB06)\n Store (DerefOf(Index(TEMP, 0x07)), BB07)\n Store (DerefOf(Index(TEMP, 0x08)), BB08)\n Store (DerefOf(Index(TEMP, 0x09)), BB09)\n Store (DerefOf(Index(TEMP, 0x0A)), BB0A)\n Store (DerefOf(Index(TEMP, 0x0B)), BB0B)\n Store (DerefOf(Index(TEMP, 0x0C)), BB0C)\n Store (DerefOf(Index(TEMP, 0x0D)), BB0D)\n Store (DerefOf(Index(TEMP, 0x0E)), BB0E)\n Store (DerefOf(Index(TEMP, 0x0F)), BB0F)\n Store (DerefOf(Index(TEMP, 0x10)), BB10)\n Store (DerefOf(Index(TEMP, 0x11)), BB11)\n Store (DerefOf(Index(TEMP, 0x12)), BB12)\n Store (DerefOf(Index(TEMP, 0x13)), BB13)\n Store (DerefOf(Index(TEMP, 0x14)), BB14)\n Store (DerefOf(Index(TEMP, 0x15)), BB15)\n Store (DerefOf(Index(TEMP, 0x16)), BB16)\n Store (DerefOf(Index(TEMP, 0x17)), BB17)\n Store (DerefOf(Index(TEMP, 0x18)), BB18)\n Store (DerefOf(Index(TEMP, 0x19)), BB19)\n Store (DerefOf(Index(TEMP, 0x1A)), BB1A)\n Store (DerefOf(Index(TEMP, 0x1B)), BB1B)\n Store (DerefOf(Index(TEMP, 0x1C)), BB1C)\n Store (DerefOf(Index(TEMP, 0x1D)), BB1D)\n Store (DerefOf(Index(TEMP, 0x1E)), BB1E)\n Store (DerefOf(Index(TEMP, 0x1F)), BB1F)\n }\n end; into device label EC0 code_regex BDA2,\s+256 replace_matched begin //BDA2, 256,\n BB00,8,BB01,8,BB02,8,BB03,8,\n BB04,8,BB05,8,BB06,8,BB07,8,\n BB08,8,BB09,8,BB0A,8,BB0B,8,\n BB0C,8,BB0D,8,BB0E,8,BB0F,8,\n BB10,8,BB11,8,BB12,8,BB13,8,\n BB14,8,BB15,8,BB16,8,BB17,8,\n BB18,8,BB19,8,BB1A,8,BB1B,8,\n BB1C,8,BB1D,8,BB1E,8,BB1F,8\n end; into method label SMBR code_regex \(BDA2, replaceall_matched begin (RDBB(), end; into method label SMBR code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label SMBW code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex Store\s\((.*),\sBDA2\) replaceall_matched begin WRBB(%1) end; into method label ECSB code_regex \(BDA2, replaceall_matched begin (RDBB(), end; # additional work for _BIX method present in some ASUS laptops into device label EC0 code_regex B0C3,\s+16 replace_matched begin XC30,8,XC31,8 end; into device label EC0 code_regex B1C3,\s+16 replace_matched begin YC30,8,YC31,8 end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B0C3, replaceall_matched begin (B1B2(^^LPCB.EC0.XC30,^^LPCB.EC0.XC31), end; into_all method label _BIX code_regex \(\^\^LPCB\.EC0\.B1C3, replaceall_matched begin (B1B2(^^LPCB.EC0.YC30,^^LPCB.EC0.YC31), end; # or could remove the _BIX method if it turns out not to work #into_all method label _BIX remove_entry; Fix Sleep issues caused by USBs
       
      #Maintained by: RehabMan for: Laptop Patches #Changed by Luan (ludufre) Eduardo #usb_prw_0x0d_xhc.txt # remove _PRW methods to prevent instant wake # delete any existing XHC1 device into device label XHC1 name_adr 0x00140000 remove_entry; # delete any existing USB2 device into device label USB2 name_adr 0x001D0000 remove_entry; # if _PRW objects are methods into method label _PRW parent_adr 0x001D0000 remove_entry; into method label _PRW parent_adr 0x001A0000 remove_entry; into method label _PRW parent_adr 0x00140000 remove_entry; into method label _PRW parent_adr 0x001B0000 remove_entry; # some other LAN cards use 0x00190000 into method label _PRW parent_adr 0x00190000 remove_entry; # if _PRW methods are stuffed into a separate scope into method label _PRW parent_label _SB.PCI0.EHC1 remove_entry; into method label _PRW parent_label _SB.PCI0.EHC2 remove_entry; into method label _PRW parent_label _SB.PCI0.XHC remove_entry; into method label _PRW parent_label \_SB.PCI0.EHC1 remove_entry; into method label _PRW parent_label \_SB.PCI0.EHC2 remove_entry; into method label _PRW parent_label \_SB.PCI0.XHC remove_entry; # if _PRW objects are names into device name_adr 0x001D0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x001A0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x00140000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x001B0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x00190000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\}\) remove_matched; # some _PRW have three entries in the Package into device name_adr 0x001D0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x001A0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x00140000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x001B0000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\n.*\}\) remove_matched; into device name_adr 0x00190000 code_regex Name.*_PRW.*\n.*\n.*\n.*\n.*\n.*\}\) remove_matched; # seems to work better if _PRW is present, but returns 0 (original was 3) for sleep state into device name_adr 0x001D0000 insert begin Name(_PRW, Package() { 0x0D, 0 }) end; into device name_adr 0x001A0000 insert begin Name(_PRW, Package() { 0x0D, 0 }) end; into device name_adr 0x00140000 insert begin Name(_PRW, Package() { 0x0D, 0 }) end; into device name_adr 0x001B0000 insert begin Name(_PRW, Package() { 0x0D, 0 }) end; into device name_adr 0x00190000 insert begin Name(_PRW, Package() { 0x0D, 0 }) end; into device label XHC set_label begin XHC1 end; into_all all code_regex XHC(?=\W) replaceall_matched begin XHC1 end; into method label _WAK code_regex \_SB.PCI0.XHC1.XWAK replace_matched begin _SB.PCI0.XHC1._INI end; It's done!
       
       
       
      To do list
       
      - Replace VoodooHDA by aDummyHDA (AppleHDA Patcher).
       
      Can't make mic/output jack work. I don't know how fix the layout.
       
      - Sleep and Hibernate
       
       
      Entering to sleep have a delay ~30 seconds, and wake to blackscreen, making necessary to press any key to power on the display.
       
      Hibernate not work. The system never wake up. (temporarily disabled with "pmset -a hibernatemode 0")
       
      - Brightness adjustment by FN keys
      Need time to search DSDT patch.
       
       
       
       
       
       
      Attached files used in the installation. For God's sake, always use the newest versions.
       
       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
      EFI before install.zip
      EFI after install v2.zip
      USB.kext.zi
×