Jump to content
wmchris

[GUIDE] Dell XPS 15 (9550) Mojave 10.14.x Quick Installation

1,471 posts in this topic

Recommended Posts

Trying to get swiping with 2 fingers on trackpad forward & backward in Safari to work.  Other gestures work fine.

 

Thanks for a great guide!

 

Happy New Year

I have the exact same challenge.

 

I've managed through ApplePS2SmartTouchPad.kext 4.7 b5 get everything working except for the forward/backward in Safari. It does however work in Finder (with 3 finger swipe motion instead of 2).

 

I have attached my Info.plist in case someone else might be interested in my configuration.

 

EDIT: Added attachment as .zip file

Info 2017-01-02.plist.zip

Share this post


Link to post
Share on other sites
Advertisement

dunno why, never got that working, too. PS2Smart was always incompatible because of the OS-language, official doesnt do it without any reason.

So are you using VoodoPS2

 

Sent from my VS986 using Tapatalk

Share this post


Link to post
Share on other sites

Hey @wmchris thanks for reposting your tutorial. I think it was really disrespectful what they did to you at TMX, glad to see you here.

Anyway, just wanted to share some things about the DA200 adapter. Mine came with the Realtek 8153 GBE, and it didn't worked out of the box.

I had to install this driver: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=56&Level=5&Conn=4&DownTypeID=3&GetDown=false

That I found on this gist: https://gist.github.com/MadLittleMods/3005bb13f7e7178e1eaa9f054cc547b0

Also the USB port on my adapter isn't working with the new hot plug patch (All the rest wok just fine). Maybe is because of the Realtek drive? didn't test before installing it.

I attached a ioreg saved while the adapter was connected with a pen drive in it's USB port, if something seems wrong please let me know.

And the DA200 link on the tutorial seems broken, here's a working one: http://accessories.ap.dell.com/sna/productdetail.aspx?c=sg&l=en&s=bsd&cs=sgbsd1&sku=470-abnl

reg.ioreg.zip

Share this post


Link to post
Share on other sites

Hi guys, anyone tried the latest XPS 9550 1.2.18 BIOS with MacOS yet? Reddit comments overall give it good reviews.

depends. on my 4K it fixed the PWM flickering. on my 1080p version it made it worse.

on my 4k it didnt change anything regarding the fan speed, on my 1080 it made the computer in fact silent.

Hey @wmchris thanks for reposting your tutorial. I think it was really disrespectful what they did to you at TMX, glad to see you here.

Anyway, just wanted to share some things about the DA200 adapter. Mine came with the Realtek 8153 GBE, and it didn't worked out of the box.

I had to install this driver: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=56&Level=5&Conn=4&DownTypeID=3&GetDown=false

That I found on this gist: https://gist.github.com/MadLittleMods/3005bb13f7e7178e1eaa9f054cc547b0

Also the USB port on my adapter isn't working with the new hot plug patch (All the rest wok just fine). Maybe is because of the Realtek drive? didn't test before installing it.

I attached a ioreg saved while the adapter was connected with a pen drive in it's USB port, if something seems wrong please let me know.

And the DA200 link on the tutorial seems broken, here's a working one: http://accessories.ap.dell.com/sna/productdetail.aspx?c=sg&l=en&s=bsd&cs=sgbsd1&sku=470-abnl

i doubt there are different versions available. mine worked out of the box. no need to install any driver. thats strange.

ok fact: my DA200 is different. I've a billboard USB device, which is missing at your setup. So they must be different. Damn it Dell!

Share this post


Link to post
Share on other sites

Dear community,

just moved here and this is my first post.

Thanks wmchris to keep on sharing all this work!

 

what exactly is the problem about hibernation? I've read that even with Ubuntu there are issues, but if you log in (blindly with black screen) and push the brightness up, it should wake up correctly. Is this a possible solution?

 

@LanyP

I'm planning to use this system mostly with an USB soundcard, do the behaviour of sound disappearing randomly refers to the sound coming from you usb device or the internal soundcard of the pc?

 

Thank you again, kind regards

Enrico

Share this post


Link to post
Share on other sites

@LanyP

I'm planning to use this system mostly with an USB soundcard, do the behaviour of sound disappearing randomly refers to the sound coming from you usb device or the internal soundcard of the pc?

 

Thank you again, kind regards

Enrico

So far I've only had audio problems with my audio interface, but I did notice that after changing the output a few times the sound becomes more stable. For me this is the last thing that really should ben fixed to get my system how I want it.

Share this post


Link to post
Share on other sites

Hello, thanks for you reply, i'll be using the pc primarily as an audio workstation, so that's kind of annoying.

What USB interface are you using? have you had the same problem with osx 10.11?

 

Does anybody know if the sleep issue is also present with 10.11? I don't see it mentioned in the el cap guide....

Thanks, regards

E
 

Share this post


Link to post
Share on other sites

Hello, thanks for you reply, i'll be using the pc primarily as an audio workstation, so that's kind of annoying.

What USB interface are you using? have you had the same problem with osx 10.11?

 

Does anybody know if the sleep issue is also present with 10.11? I don't see it mentioned in the el cap guide....

Thanks, regards

E

 

there is no sleep issue, there is a hibernation issue.

Hibernation = Suspend to Disk

Sleep = Suspend to Ram

And yes, it's on both. Suspend to Disk can (and will) corrupt your disk drive if you're using the integrated original M.2 SSD.

Share this post


Link to post
Share on other sites

Hello, thanks for you reply, i'll be using the pc primarily as an audio workstation, so that's kind of annoying.

What USB interface are you using? have you had the same problem with osx 10.11?

 

Does anybody know if the sleep issue is also present with 10.11? I don't see it mentioned in the el cap guide....

Thanks, regards

E

 

I'm also using it primarily as an audio workstation. I have the m-audio mtrack 2x2, but I'm sure the problem isn't the interface but our hackintosh configuration. This is also my first time installing osx on this laptop and I went for Sierra instead of El capitan. So I don't know how that would work out.

 

Tomorrow I will do some more testing for how long the audio disappears, how I fix it etc..And then I'll let you know.

Share this post


Link to post
Share on other sites

to be honest: unknown. noone tried that yet and i cant do it, because i dont own a hynix ssd to hack it myself.

 

Thanks for the great guide, just curious how likely is it to get a kext or some work around for Hynes ssd?

Thanks!

Share this post


Link to post
Share on other sites

Thanks for your replies, I bought this laptop used earlier this week and I'll do the osx installation this weekend. I'll report my experience with my rme usb sound card asap.

 

Thanks wmchris for explaining the difference between sleep and hibernation!

 

Regards

Share this post


Link to post
Share on other sites

Hi

 

I have a 2016 Dell XPS 9550 with 16GB Ram and 512 GB Nvram SSD. Using the latest version from the github repo with clover and a Sierra installation on a 16GB USB I can get the Mac installation running, but when I try to install or open disk utility then my internal harddrive will not show up. I can only see USB drives.

 

I had a similar problem when installing Ubuntu previously on the same computer, but then went into the BIOS settings and changed over to ACHI from RAID controller for the harddrives. After this the harddrive was detected for the ubuntu installation. On top of that I have disabled secure boot and some other settings. I've also tried other flavors of pre made XPS 9550 Clover configurations without luck (not even being able to launch the MacOS X installation GUI).

 

Does anyone have any hints as to what I need to do in order to trouble shoot this? I'd really like to have Mac running on my Dell computer as my old Mac is on it's last leg. 

Share this post


Link to post
Share on other sites

Hi

 

I have a 2016 Dell XPS 9550 with 16GB Ram and 512 GB Nvram SSD. Using the latest version from the github repo with clover and a Sierra installation on a 16GB USB I can get the Mac installation running, but when I try to install or open disk utility then my internal harddrive will not show up. I can only see USB drives.

 

I had a similar problem when installing Ubuntu previously on the same computer, but then went into the BIOS settings and changed over to ACHI from RAID controller for the harddrives. After this the harddrive was detected for the ubuntu installation. On top of that I have disabled secure boot and some other settings. I've also tried other flavors of pre made XPS 9550 Clover configurations without luck (not even being able to launch the MacOS X installation GUI).

 

Does anyone have any hints as to what I need to do in order to trouble shoot this? I'd really like to have Mac running on my Dell computer as my old Mac is on it's last leg. 

Hello @magnusart

 

Welcome.

 

 

I suspect that you have an NVMe SSD?

 

Because of that you need to apply the NVMe patches even to your USB installer.

 

If you've a NVM SSD Drive, you need to install NVMe-Hackr with SSDT Spoofing (enables easier system upgrading from appstore). Dont do this if you use the HDD version of the Dell or you use your M.2 port for something different than a SSD (for ex. a UMTS modem)

 

sudo cp ./Post-Install/AD-Kexts/HackrNVMe/SSDT-Hackr.aml /EFI/EFI/CLOVER/ACPI/patched/

sudo cp -r ./Post-Install/AD-Kexts/HackrNVMe/HackrNVMeFamilySpoof-10_12_2.kext /Library/Extensions/

 

But instead of Library/Extensions that would be your /EFI/CLOVER/kexts/10.12 or Other

 

 

You can read more about what you are doing and trying to achieve at Rehabmans GitHub here: README.md

Share this post


Link to post
Share on other sites

 

I suspect that you have an NVMe SSD?

 

Because of that you need to apply the NVMe patches even to your USB installer.

 

But instead of Library/Extensions that would be your /EFI/CLOVER/kexts/10.12 or Other

 

 

You can read more about what you are doing and trying to achieve at Rehabmans GitHub here: README.md

that's not correct. the delivered config.plist for installation has the temporary patches in it. If nothing shows up then it's either something wrong configured in the EFI configuration, or it's a hynix SSD. Check the vendor from within linux or windows. If it is a hynix, your only chance is to swap it.

 

EDIT: but you can try the fix above anyway. you cant do any harm with it, and maybe some spoofing is everything thats needed to make it run?

Share this post


Link to post
Share on other sites

Thanks for the reply. Below is the relevant output from sudo lspci -vvnn. I've also looked into the PCIO Path further below. I think it should fit the current config?

 

I guess I'll give the scripts a spin.

04:00.0 Non-Volatile memory controller [0108]: Device [1c5c:1284] (prog-if 02 [NVM Express])
Subsystem: Device [1c5c:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at de400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable- Count=1/8 Maskable+ 64bit+
Address: 0000000000000000  Data: 0000
Masking: 00000000  Pending: 00000000
Capabilities: [b0] MSI-X: Enable+ Count=65 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [c0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L0s <1us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via message
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout+ NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [150 v1] Device Serial Number 6c-f9-00-90-61-2e-e4-ac
Capabilities: [160 v1] Power Budgeting <?>
Capabilities: [1b8 v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Capabilities: [300 v1] #19
Capabilities: [900 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
 PortCommonModeRestoreTime=120us PortTPowerOnTime=10us
Kernel driver in use: nvme
Kernel modules: nvme
*-pci:3
             beskrivning: PCI bridge
             produkt: Sunrise Point-H PCI Express Root Port #9
             tillverkare: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: f1
             bredd: 32 bits
             klocka: 33MHz
             förmågor: pci normal_decode bus_master cap_list
             konfiguration: driver=pcieport
             resurser: irq:16 memory:de400000-de4fffff
           *-storage
                beskrivning: Non-Volatile memory controller
                physical id: 0
                bus info: pci@0000:04:00.0
                version: 00
                bredd: 64 bits
                klocka: 33MHz
                förmågor: storage nvm_express bus_master cap_list
                konfiguration: driver=nvme latency=0
                resurser: irq:16 memory:de400000-de403fff

Share this post


Link to post
Share on other sites

The just announced Dell XPS 15 9560 has Intel HD 630 graphics.  I'm thinking of upgrading.  I don't think the HD 630 Graphics are supported yet but they probably will be in the near future?

 

Thoughts?

 

Thanks

Share this post


Link to post
Share on other sites
04:00.0 Non-Volatile memory controller [0108]: Device [1c5c:1284] (prog-if 02 [NVM Express])

sorry pal: vendor id 1c5c is hynix. No chance, except you want to switch the M.2 SSD. But if you want to help me fiddling with it a lil bit... (http://www.insanelymac.com/forum/topic/319929-pikeralphas-nvme-patch-with-hynix-m2-ssds/)

The just announced Dell XPS 15 9560 has Intel HD 630 graphics.  I'm thinking of upgrading.  I don't think the HD 630 Graphics are supported yet but they probably will be in the near future?

 

Thoughts?

 

Thanks

it's only a lil bit faster, but noone tested it, yet - @rehabman thinks it should work. no guarantee. But we know for sure that you'll HAVE TO (!) replace the wireless card as well as the NVMe, because (as far as leaks can be trusted) the 9560 will be using Hynix M.2 drives exclusively and will use the Rivet Killer Network Wifi adaptor - both not hackintosh compatible.

Share this post


Link to post
Share on other sites

 

 

sorry pal: vendor id 1c5c is hynix. No chance, except you want to switch the M.2 SSD.

 

Too bad! :( Well, at least I know it's not going to work. Spent better part of 2 days on this. Are there any further information around hynix and why it won't work are there work ongoing that will likely change in the future? Thanks for the help so far even if this might be the end of the journey for me.

Share this post


Link to post
Share on other sites

Too bad! :( Well, at least I know it's not going to work. Spent better part of 2 days on this. Are there any further information around hynix and why it won't work are there work ongoing that will likely change in the future? Thanks for the help so far even if this might be the end of the journey for me.

Apple has only a driver for their own NVMe devices. PikerAlpha hacked it and added the posibility to use this driver on non apple OEM SSDs. But this hack doesnt work with hynix devices.

 

Because i never had one i cant tell you why. It's possible that it can be easily fixed, but this requires at least some amount of time and skill.

 

The good thing is: you can easily swap the M.2 SSD for something compatible.

Share this post


Link to post
Share on other sites

Thank you for all the work you have done on this project. I have been following this closely, and am close to purchase.

My primary work is audio post, I am looking to use a Thunderbolt audio I/O (Focusrite) with this setup.

Anyone gone that route already and can confirm success with a Thunderbolt interface? Thank you so much for your time!

 

MW

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By glasgood
      GLASGOOD'S
       
      MOJAVE HACKINTOSH GUIDE 
       

       
       
       
      **FOR**  GIGABYTE Z390 AORUS PRO
       
       
       
       
      CREDITS & THANKS
       
      @MaLd0n
      His help with EFI configuration and DSDT
       
      CLOVER  TEAM
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon Et al
       
      APPLEALC
      Acidanthera, vit9696
       
      VOODOOHDA
      autumnrain, slice2009, zenith432
       
      ESP PRO MOUNTER
      @Micky1979 
       
      HACKINTOOL
      @headkaze
       
      CLOVER CONFIGURATOR
      Mackie100
       
      THEME ENGINE
      Alex Zielenski
       
      INSANELYMAC
      OLARILA
       
      Hackintool Tutorial
      daliansky
       
      Hackintosh Guide
      CorpNewt
       
       
      MONITORCONTROL
      JoniVR & theOneyouseek
       
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
      UPDATES
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
       
      PART LIST
       
      • Intel I7 8700 
      • Gigabyte Z390 AORUS PRO
      • Gigabyte AORUS RADEON RX 580 8GB ( connected to monitor with DisplayPort )
       
      • Corsair Vengeance LPX 16GB ( 2 x 8GB ) 2666MHz – CMK16GX4M2A2666C16  In this build, both memory modules are installed in memory slots DDR4_A1  and DDR4_B1 
       
      • Corsair RM650x 80 Plus Gold Power Supply Unit
      • Corsair H100i V2 AIO Hydro/Water RGB LED CPU Cooler
      • Samsung EVO 500GB SSD (2.5) macOS Mojave
      • Samsung EVO 250 GB SSD (2.5) Windows 10 Pro
      • NZXT H500 Mid Tower ATX Case
       
      • RECOMMENDED WIFI CARD → ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS  
      OR
      • WIFI and Bluetooth with BCM94331CD with PCI-e adapter (but will require AirportBrcmFixup.kext for AirDrop.. )
       
      ** Avoid Samsung EVO 970 PLUS as Hackintosh has problem with that device **
       
       
      WORKING
       
      • Sound 
      • HDMI Port on AMD RX580 / 590 ( Ensure you disable BIOS CSM if using HDMI on RX580 / RX590 )
      • HDMI Port on Aorus Z390 Motherboard ( Ensure you have correct BIOS settings as per this guide for Intel only)
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Handoff
      • Continuity
       

       

       
       
       

       
       
       
       
       
      PREAMBLE - BEFORE YOU START 
       
      Here detailed, is all the  steps towards building a successful and stable Aorus Pro Z390 Hackintosh, if you are a first time Hackintosher, this guide will have you quickly up and running with the Aorus Pro Z390 Hackintosh. To rule out any problems from the go,
      only have the disc that you plan to install macOS Mojave connected to the Aorus Pro, disconnect any other Windows / Linux or data drives, external drives from your Aorus Pro. Windows / Linux and data drives can be connected after successful installation of macOS Mojave
      If you have more than 16 GB of memory, then install macOS Mojave with just 16GB, you can later add any additional memory. Install memory modules in slots DDR4_A1  and DDR4_B1. This build has the Wi-Fi combo PCI-e adapter card installed in slot PCIEX1_3.
      The WiFi/Bluetooth PCI-e Combo card used in this Aorus Pro guide has it's 9 pin USB cable attached to motherboard header F_USB2 and is enabled in SSDT-UIAC.aml ( USB ports fix ). 
       
      Do install macOS Mojave on its own physical drive, so do not try and install macOS Mojave onto a free partition on a disc that contains Windows.
      Remove any Thunderbolt cards, Thunderbolt card can be reinserted after installation.  Double check your BIOS settings are the same as this guide. 
       
      Following are unsupported / problematic
       
      • Intel Optane ( if you have this, remove it before installation of macOS Mojave )
       
      • Samsung EVO Plus drives ( firmware problem with macOS )
       
      • XFX Radeon RX 580
       
      • NVIDIA GTX / RTX not supported in macOS Mojave
       
      • Fenvi T919 Wireless Card, it seems Bluetooth is not working out of box for some users ( Maybe the USB port attached to Fenvi bluetooth is wrongly configured, or the SSDT-UIAC.aml port connector was not configured as Internal, or maybe some other reason )
         Save yourself a headache --->  RECOMMENDED WIFI CARD WORKING OUT OF BOX (OOB)  is ---> ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS 
       
      Q - WILL THIS GUIDE WORK WITH MY NON AORUS Z390 MOTHERBOARD ?
      A - Possibly may work with other Z390 chipset motherboards, but you will have to remove SSDT-UIAC.aml from Clover / ACPI / patched from the PRE-INSTALL EFI and enable the ports limit patch.
       
       
       
       
       
      PART 1 - DOWNLOAD 
       
       
      Download the following:
       
      • CLOVER
       
      • PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip
       
      • POST-INSTALL Aorus Pro Z390 EFI - RX580.zip 
       
       
       
       
       
      // INTEL UHD 630 EFI  Aorus Pro Z390 EFI's below. For those who do not have a Graphics Card Installed in PCIe Slot, requires Initial Display Output BIOS setting to be changed to IGFX  spoiler below!
       
      •  PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
       
      • POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
       
       
       
       
       
      • ESP MOUNTER PRO v1.9
       
      • macOS MOJAVE 
       
      • CLOVER CONFIGURATOR
       
      • EmuVariableUefi-64.efi  ( Used only to initialise iMessages. It then must be removed from Clover drivers64UEFI folder as will cause intermittent memory allocation errors on boot, explained in guide)
       
       
      OPTIONAL DOWNLOADS
       
      • Native Display Brightness with MonitorControl
       
      • VoodooHDA.kext.zip 

      • ThemeEngine 
       
      • Assets.car 
       
       
      // Not really needed but IF no sound on Wake from Sleep then use SSDT-ALC1220 and CodecCommander
      • SSDT-ALC1220.aml  ( Resolves Audio Sound on Wake, place in Clover / ACPI / Patched )
       
      • CodecCommander.kext.zip ( Resolves Audio Sound on Wake, place in Clover / Kexts / Other )
       
       
       
       
      PART 2 - BIOS SETTINGS (version F9 )
       
       
      Here is a list of the BIOS settings that I have used ( Screenshots in spoiler below )
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Enabled
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Enabled
      • Chipset → Internal Graphics → Enabled
      • Chipset → DVMT Pre-Allocated → 256M
      • Chipset → DVMT Total Gfx Mem → MAX 
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Disabled 
       
      • Power → ErP → Disabled
      • Power → RC6 (Render Standby) → Disabled
       
      // IF USING  CORSAIR H100i V2 AIO CPU WATER COOLER 
      • MIT → Smart Fan 5 Settings → CPU Fan Control mode → PWM 
       
      • Save & Exit → Save & Exit Setup
       
      SCREEN DUMP SPOILERS
       
       
       
       
       
      PART 3 – CREATE A MOJAVE USB FLASH INSTALLER
       
      Prepare USB Installer for Mojave ( Video below )
       
      • Insert USB drive
      • Launch /Applications/Utilities/Disk Utility
      • Disk Utility → View → Show All Devices
      • On Left-hand panel → External →(Identify your USB device in left hand panel)
      • Click and highlight your USB device in the left-hand panel.
      • Click erase button.
      • Name: USB
      • Format: Mac OS Extended (Journaled )
      • Scheme: GUID Partition Map
      • Click Erase button.
       
      • Place the downloaded MacOS Mojave app into Applications folder.
      • Open Terminal copy and paste:
       
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction && say Mojave Drive Created  • Enter
       
       
       
       
       
       
       
       
       
       
       
      PART 4 – INSTALL CLOVER ON THE MOJAVE USB INSTALLER 
       
      Make Mojave USB flash drive installer bootable.( Video below )
       
      • Launch Clover application, double click.
      • Click Continue → Continue → Continue 
      • Click Change Install Location button.
      • Click Install macOSMojave USB installer → Continue
      • Click Customise button
      • Choose:
      Clover for UEFI booting only Install Clover in the ESP Themes UEFI Drivers Install RC scripts on target volume    NO NEED TO INSTALL RC SCRIPTS ON USB INSTALLER • Click Install button
      • Installation Complete!
       
      Video:
       
       
       
       
       
       
      PART 5 – CUSTOMIZE MOJAVE USB INSTALLER FOR AORUS Z390 PRO
       
      Replace Clover EFI folder with PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip  OR  if NO graphics card installed in PCIe slot, then use PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip( Video below ) 
       
      • Install ESP Mounter Pro v1.9
      • Using ESP Mounter Pro, Mount ESP on disk2s1 ( Your disk name may be different )
       

       

       
       
       
      • Open mounted EFI partition found on desktop
      • Copy all the contents from Aorus 390 Pro EFI folder
      • Replace USB EFI folder with all the contents inside the Aorus 390 Pro EFI folder.
       
       

       
       
       
       
       
       
       
      PART 6 – INSTALL MAC OS MOJAVE ON INTERNAL DRIVE
       
      INSTALL NOTE
       
      ENSURE BIOS: Above 4G Decoding is set to Disabled 
      if Above 4G decoding is set to enabled then macOS Mojave install will freeze at 2 mins remaining and will not shut down properly!!!!
       
      Please be patient during install, so when install gets to 2 or 3 mins remaining then it may take extra time. Be ready to boot from UEFI USB installer by pressing F12 when install initiates restarts. 

      • INSERT USB INSTALLER INTO THE USB 2.0 PORT  
       
       
       Here is a walkthrough of the full process using the macOS Mojave USB Installer on the Aorus Z390 Pro. 
       
       
       
       
      • Power on PC and press F12• Choose bootable USB drive from boot menu.
       
       
       
      • Install macOS Mojave to internal solid state or hard drive.
       
       
       
      When system returns to the Clover boot menu choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      At next restart, press F12 and boot from external UEFI USB device and choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      Proceed with macOS Mojave install
       
       
      macOS Mojave is now installed, but it can only boot at this moment thanks to FakeSMC and Clover on the Mojave USB flash drive installer.
       

       
       
       
       
       
       
      PART 7 – MAKE AORUS Z390 PRO INTERNAL DRIVE BOOTABLE
       
      Make internal drive bootable ( Video below )
       
      So far, the Aorus Pro can only boot the internal system drive with the aid of the Mojave USB Installer.
      To boot from the internal system drive without the installer: 
       
      Download and install Clover with RC Scripts on target volume.  
      If your Aorus Pro Z390 has AMD RX 580 then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - RX580.zip  folder and paste it inside the the System Drive EFI partition.          OR
      If your Aorus Pro Z390 has no graphics card installed in PCIe slot, then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip  folder and paste it inside the the System Drive EFI partition.   
       

       
       
       
      • Remove USB Mojave installer and shut down and restart.
       
      Aorus Hackintosh should now be able to boot to macOS Mojave, Done, well almost ! 
       
       
       
       
       
      PART 8 – ENABLE IMESSAGES & FACETIME 
       
       
      // UPDATE 21st MAY 2019
       
      Past experience suggests Clover Configurator now automatically populates correct values for working iMessages when you select an SMBIOS.  
       

       
      After selecting SMBIOS, example iMac19,1 for Aorus Pro with RX580 ( image above ) then go to Apple and ensure you have the "serial number is not valid " message. Done!
       
      If you still have problems connecting to iMessage, test and ensure that AirDrop is working, then follow instructions inside spoiler. 

       
       
      • Mount internal drive EFI/ESP partition
      • Go to folder CLOVER → drivers64UEFI 
      • Place both EMUVariableUefi-64.efi inside → drivers64UEFI
       
       
      Using Clover Configurator, add the following argument to config.plist using Clover Configurator.
       
      • Slide = 0
       

       
       
      Shutdown and then press power on button on PC.
       
      • You should now be able to Log into iCloud, iMessages and FaceTime
       
       
       
      • NOW delete EMUVariableUefi-64.efi from CLOVER → drivers64UEFI Folder 
      • Shutdown and restart Aorus Pro hackintosh. iMessages etc is now operational without EMUVariableUefi-64.efi ( EMUVariableUefi-64.efi only needed to initialise iMessages )
       
       
      // UPDATE 22nd May 2019 
       
      • It seems that there are no "Couldn't allocate runtime area"  errors when continuing to use EMUVariableUefi-64.efi since updating to macOS Mojave 10.14.5 and using Clover version r4920. 
      • It is important to delete EMUVariableUefi-64.efi, this will avoid very intermittent boot errors such as: “Couldn’t allocate runtime area”  post errors.
       
       
       
       
      PART 9 – ENABLE TRIM for Solid State Flash Drives
       
      Open Terminal and enter the following command:
      sudo trimforce enable  
       
       
       
       
      DEFAULT SSDT –  USB PORTS FIX CONFIGURATION WITH FRONT USB-C - SSDT ALREADY INSIDE AORUS Z390 EFI FOLDER  – Provided by @AudioGod 
       
       

       

       
      If you have USBC on Computer Chassis / Case, then SS01 and SS02 is mapped to that USB C port 
       

       
       
       
       
       
       
      ------------    GUIDE FINISHED YOU SHOULD NOW HAVE WORKING AORUS Z390 PRO HACKINTOSH  WITH SSDT USB FIX   ------------
       
       
       
      OPTIONAL: Set Wi-Fi Country Code
       
       
       
       
       
       
      OPTIONAL: System Information - PCI
       
       
       
       
       
       
       
      OPTIONAL:  Enable HDMI Audio on RX580
       
       
       
       
       
       
       
      OPTIONAL:  Native Display Brightness - with MonitorControl

       
       
       
       
       
       
      OPTIONAL:  Dual Boot macOS Mojave & Windows 10 
       
       
       
       
       
       
       
       
      OPTIONAL:  Replace the default "About This Mac" Apple Logo with RED AORUS APPLE
       
       

       
       
       
       
      OPTIONAL - ALTERNATIVE SSDT 1 –  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 2 -  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 3 – Create your own SSDT
       
       
       
       
       
      FRAMEBUFFER PATCHING  – For working Intel UHD 630 Graphics, working HDMI Port, working HDMI Audio on Aorus Z390 Pro
       


       
       
       
       
       
       
      RECOMMENDED READING  – Excellent Hackintosh Vanilla guide created by CorpNewt with in depth tutorial on Clover.  
       
      https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/config.plist-per-hardware/coffee-lake
       
       
       
       
       
       
       
      FOR MORE HACKINTOSH INFORMATION SUCH AS USB PORTS FIX, CLOVER CONFIGURATOR, HACKINTOSH BACKUP WITH CARBON COPY CLONER .....   THEN SEE MY PREVIOUS GUIDE FOR ASUS Z370-G Strix
       
       
       
       
       
       
       
       
       
       
       

       
       
       
       
       
       
       
       
      SSDT-UIAC.aml.zip
      SSDT-UIAC.dsl.zip
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?f=45&t=9172
       
      ---USB---
      https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By Candrahm
      Hi everybody,
       
      I'm new here and French. 
      I success to hack my Asus X751LJ and pass it to High Sierra 10.13.6, not easily, and everything works except the keyboard and the touchpad.
      I tried VoodooPS2Controller, ApplePS2SmartTouchpad, even VoodooI2C, but nothing works...
      Could someone help me? Is there a DSDT problem? Witch kext should I use?
      I post my ACPI and Kexts folders and my IOReg.
      Please... Help me. I'm desperate...
      MacBook Pro de Candrahm.ioreg
      Archive.zip
    • By Dreamwhite
      Hi there,
      I've decided to install Mac OS Mojave 10.14 on my laptop. I've installed it using the vanilla method (dosdude1 patcher, TINU, clover on USB drive)Actually I need to fix some things such as the CMD key (that changed from WIN key to L_ALT key), the brightness control and the fn keys (such as brightness up and down)
      N.B. I've actually ordered a DW1560 (BCM94352Z) WiFi M.2 card because my QCA9377 doesn't work. 
      Below you can find my CLOVER CONFIG, the ioreg and the acpi/origin folder of CLOVER extracted using the F4 method.
      Dell Inspiron 5370 HW:
          
          CPU => i5-8250u
          GPU => Intel Graphics UHD 620
          RAM => 8GB DDR4 2400MHz
          SSD => 256 GB M.2
          WIFI/BT => QCA9377 (still waiting for the DW1560 wifi card)
      MacBook Pro di Ivan.ioreg
      ACPI DELL INSPIRON 5370 ORIGIN.zip
      CLOVER EFI.zip
    • By End3rPower50
      Hi, i've installed on my pc MacOS Mojave but after installation my pc, sometimes, crash giving kernel panic.
      I came to the conclusion that it is a random kernel panic because sometimes it starting up and other times it isn't starting up
       
      My PC:
      CPU: Intel i7 6500U
      LAN: RTL8100
      Wi-Fi & Bluetooth: Dell DW1820A
      USB 3.1
       
      CLOVER.zip
×