Jump to content
wmchris

[GUIDE] Dell XPS 15 (9550) Mojave 10.14 / 10.15 Quick Installation

1,536 posts in this topic

Recommended Posts

 

 

This tutorial has been updated on GITHUB to 10.14 and 10.15

the tutorial on insanelymac got too fragmented for a simple forum thread and will not be updated, but still be used for discussion and hints, tips and tricks

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dell XPS 15 (9550, Version of 2016) Sierra 10.13.1 Tutorial

post-19619-0-96849400-1486167401_thumb.png

 


 

 

 

 

 

Before we start:
this installation includes real time DSDT/SSDT patching from within clover. This is pretty easy to install. But it is NOT suited for people with no or only few knowledge in Hackintosh Systems. If you only know how to copy commands in your shell and you dont know what they're doing, then stop the tutorial and revert to windows or buy a real mac. Even if you get it running: this system is not failsafe and will be broken multiple times in its usage time, where you have to fix it without a tutorial.
Optional steps are marked in GREEN, System dependent steps are BLUE

English is not my mother-tongue and i'm writing this without proof reading, so please forgive my bad spelling :)

If you've questions or something doesn't work: first check if you've done all steps of this tutorial! If yes: please read the whole thread (doesn't matter how long it is) before asking to prevent multiple questions. Additionally do a search in google and this forum.


Credits:
Many knowledge of "how to hackintosh a dell in the first place" by the tutorial of @Gymnae http://www.insanelymac.com/forum/topic/319766-dell-xps-9550-detailled-1011-guide/
Using many kexts and solutions from @RehabMan


What's not working:

  • Hibernation (works somehow, but high chance to destroy your whole data), Sleep works fine!
  • SD-Card reader
  • Killer 1535 Wifi (rarely used, need replace)
  • nVidia Graphics card (Intel works)
  • FileVault 2 (full HDD encryption)

Requirements:

  • one working MAC OS X Enviroment
  • 16GB USB Stick (larger is sometimes not bootable and/or requires advanced partitioning)
  • MacOS High Sierra 10.13.1 installation file from the app store (redownload, just in case)
  • Knowledge in PLIST editing
  • USB Harddrive for backup - you'll loose all data on your computer!

Step 1: Prepare Installation
Use the existing Mac to download the Sierra installer from the App Store and create a bootable USB stick with CLOVER. You can do this with the App "Pandora's Box" of insanelymac (use google for download link), which is pretty easy to use.
Optional: check if your SSD can be switched to 4k sector size. This prevents NVMe corruption. See https://github.com/wmchris/DellXPS15-9550-OSX/blob/10.13/4k_sector.md

After you've finished you need to download the Dell XPS 15 specific configurations for clover.
Link: https://github.com/wmchris/DellXPS15-9550-OSX/archive/10.13.zip
and unzip this file or checkout git directly:

git clone https://github.com/wmchris/DellXPS15-9550-OSX.git

You only need the folder 10.13, you can delete the 10.11. I'll refer to this folder by "git/"
Now mount the hidden EFI partition of the USB Stick by entering

diskutil mount EFI

Inside the terminal. Mac OS will automaticly mount the EFI partition of the USB stick, but just in case: make sure it really is
Overwrite everything in the CLOVER folder of the partition EFI with the content of git/10.13/CLOVER.
If your PC has a Core i5 processor, you'll have to modify your config.plist in EFI/EFI/CLOVER/: search for the Key ig-platform-id: 0x191b0000 and replace it with 0x19160000.

If you could use the 4k sector patch, replace the config.plist with the 4kconfig.plist. 
If you use a hynix device and you didnt do the 4k sector switch, you'll have to add the following patch to your config.plist

<key>Comment</key>
<string>IONVMeFamily Pike R. Alpha Hynix SSD patch</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>9sEQD4UcAQAA</data>
<key>Name</key>
<string>IONVMeFamily</string>
<key>Replace</key>
<data>9sECD4UcAQAA</data>

Go into the EFI Configuration (BIOS) of your Dell XPS 15:

 

Quote

In order to boot the Clover from the USB, you should visit your BIOS settings:
- "VT-d" (virtualization for directed i/o) should be disabled if possible (the config.plist includes dart=0 in case you can't do this)
- "DEP" (data execution prevention) should be enabled for OS X
- "secure boot " should be disabled
- "legacy boot" optional
- "CSM" (compatibility support module) enabled or disabled (varies)
- "boot from USB" or "boot from external" enabled

Note: If you get a "garbled" screen when booting the installer in UEFI mode, enable legacy boot and/or CSM in BIOS (but still boot UEFI). Enabling legacy boot/CSM generally tends to clear that problem.
In my case I left VT-d and Fastboot as they were. Also, update your 9550 to the latest BIOS.

Don't forget to set mode to "AHCI" in the sub-menu "SATA Operation" of "System Configuration". It's mandatory.

Also disable the SD-Card Reader to reduce the power consumption drastically. Insert the stick on the Dell XPS 15 and boot it up holding the F12 key to get in the boot-menu and start by selecting your USB-Stick (if you've done it correctly it's named "Clover: Install macOS Sierra", otherwise it's just the brandname of your USB-Drive). You should get to the MacOS Installation like on a real mac. If you're asked to log-in with your apple-id: select not now! Reason: see Step 5.


Step 2: Partition and Installation
INFORMATION: after this step your computer will loose ALL data! So if you haven't created a backup, yet: QUIT NOW!

Dont install macOS yet. Select the Diskutil and delete the old partitions. Create a new HFS partition and name it "OSX". If you want to multiboot with Windows 10, then you'll have to create a second partition, too (also HFS! Dont use FAT or it will not boot! You have to reformat it when installing Windows). Make sure to select GUID as partition sheme.
Close the Diskutil and install OSX normally. You'll have to reboot multiple times, make sure to always boot using the attached USB stick. So dont forget to press F12. After the first reboot you should see a new boot option inside clover, which is highlighted by default. Just press enter. If you only see one, then something went wrong.



Step 3: Make it bootable
After a few reboots you should be inside your new macOS enviroment. You can always boot into it using the USB stick. Remove the USB drive after successful bootup. Enter

diskutil mount EFI

in your terminal, which should mount the EFI partition of your local installation.

install git/Additional/Tools/Clover_v2.4k_r4003.pkg. Make sure to select "Install Clover in ESP". Also select to install the RC-Scripts. This should install the Clover Boot System. Now copy everything from git/10.13/CLOVER to EFI/CLOVER like you did before by creating the usb stick. (if you had to modify the config.plist in step 1, do it here, too). Your system should be bootable by itself. Reboot and check if your system can boot by itself.


 
Step 4: Post Installation
Because all DSDT/SSDT changes are already in the config.plist, you dont need to recompile your DSDT (albeit i suggest doing it anyway to make your system a lil bit more failsafe, see gymnaes El-Capitan tutorial for more informations). So we can skip this part and go directly to the installation of the required kexts. Open a terminal and goto the GIT folder.

sudo cp -r ./Post-Install/LE-Kexts/* /Library/Extensions/
sudo mv /System/Library/Extensions/AppleACPIPS2Nub.kext /System/Library/Extensions/AppleACPIPS2Nub.bak 2> /dev/null
sudo mv /System/Library/Extensions/ApplePS2Controller.kext /System/Library/Extensions/ApplePS2Controller.bak 2> /dev/null
sudo ./AD-Kexts/VoodooPS2Daemon/_install.command

Now you'll have to replace the config.plist. Because you'll install modified kexts you'll HAVE TO replace the config.plist in your installation. Otherwise your PC will not boot anymore.

diskutil mount EFI

replace EFI/CLOVER/config.plist with git/Post-Install/CLOVER/config.plist. Again: if your PC has a Core i5 processor, search the config.plist for the Key ig-platform-id: 0x191b0000 and replace it with 0x19160000.

OPTIONAL (in case you've audio problems):
AppleHDA has some problems after Wake-Up. You'll have to plug in a headphone to get your speakers working again. You can use VoodooHDA instead, which breaks the headphone jack most of the time, but makes the rest much more stable.

sudo rm -r /Library/Extensions/CodecCommander.kext
sudo rm /EFI/EFI/CLOVER/ACPI/patched/SSDT-ALC298.aml

then remove from your config.plist from the key "KextsToPatch" the elements "AppleHDA#1" to "AppleHDA#7". Install the package: git/Post-Install/AD-Kexts/VoodooHDA-2.8.8.pkg
i also suggest moving some of the kext from EFI/CLOVER/kexts/10.13 to /Library/Extensions. It's just more stable.

Finalize the kext-copy by recreating the kernel cache:

sudo rm -rf /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
sudo rm -rf /System/Library/PrelinkedKernels/prelinkedkernel
sudo touch /System/Library/Extensions && sudo kextcache -u /

sometimes you'll have to redo the last command if your system shows "Lock acquired".
OSX 10.12.2 removed the posibility to load unsigned code. You can enable this by entering

sudo spctl --master-disable

If you're using the 4K monitor, you'll have to copy the UHD enabling kexts to your clover directory:

sudo cp ./Post-Install/AD-Kexts/UHD-Kexts/* /EFI/EFI/CLOVER/kexts/10.13/

To enable GPU acceleration: Edit your clover config file again and remove the following block from it:

Quote
<key>FakeID</key>
<dict>
<key>IntelGFX</key>
<string>0x12345678</string>
</dict>

 

 

To prevent getting in hibernation (which can and will corrupt your data), just set the default sleep mode to "suspend to ram" (sleep) instead of "suspend to disk" (hibernation)

sudo pmset -a hibernatemode 0

To get HDMI Audio working:
Search for your Boarrd-ID in the config.plist and open /S/E/AppleGraphicsControl.kext/contents/plugin/AppleGraphicePolicy.kext/contents/info.plist with a texteditor. Search for your board-id in there and change the value of it from "Config2" to "none"
 
OPTIONAL (alternative power management):
the whole power management is done by intels speed step technology (HWP), which is enabled in the clover config. If you want to let OSX manage the power management, you'll have to do these steps:

sudo cp ./Post-Install/CLOVER/ACPI/optional/SSDT.aml /EFI/EFI/CLOVER/ACPI/patched/

then open the config.plist (/EFI/EFI/CLOVER/config.plist) and change <key>HWPEnable</key><true/> to <key>HWPEnable</key><false/>.
 
Step 5: iServices (AppStore, iMessages etc.)
 

WARNING! DONT USE YOUR MAIN APPLE ACCOUNT FOR TESTING! It's pretty common that apple BANS your apple-id from iMessage and other services if you've logged in on not well configured hackintoshs!

If you want to use the iServices, you'll have to do some advanced steps, which are not completly explained in this tutorial. First you need to switch the faked network device already created by step 4 to be on en0. Goto your network settings and remove every network interface.

sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist

Reboot, go back in the network configuration and add the network interfaces (LAN) before Wifi.

You also need to modify your SMBIOS in the config.plist of Clover in your EFI partition with valid informations about your "fake" mac. There are multiple tutorials which explain how to do it like "http://www.fitzweekly.com/2016/02/hackintosh-imessage-tutorial.html".

It's possible you have to call the apple hotline to get your fake serial whitelisted by telling a good story why apple forgot to add your serial number in their system. (aka: dont do it if you dont own a real mac). I personally suggest using real data from an old (broken) macbook.



Step 6: Upgrading to macOS 10.13.2 or higher / installing security updates
Each upgrade will possibly break your system!
(Update: after the latest updates in this tutorial the system should be update-proof.) 

 

Step 7: Fixes / Enhancements / Alternative Solutions / Bugs

See: https://github.com/wmchris/DellXPS15-9550-OSX/blob/10.13/Tutorial_10.13_Step7.md

 

Afterword and fixes
as i said before: this is not a tutorial for absolute beginners, albeit it's much easier then most other tutorials, because most is preconfigured in the supplied config.plist. Some Dells have components included, which are not supported by these preconfigured files. Then i can only suggest using Gymnaes tutorial which explains most of the DSDT patching, config.plist editing and kexts used in detail and use the supplied files here as templates.

Tutorial Updates

  • 27. March 2017: UHD Kexts added, replaces perl command
  • 23. March 2017: 4k sector tutorial against NVMe corruption added  
  • 7. March 2017: Suggestion to disable the SD Card Reader for reduced power consumption
  • 4. February 2017: Dell SMBIOS Truncation workaround added
  • 23. January 2017: Hynix SSD fix added
  • 31. December 2016: USB-C Hotplug Fix and USB InjectAll Removed
  • 28. December 2016: NVMe SSDT Spoof precreated, FakeID already preset in installation config.plist. VoodooHDA added as alternative to SSDT-ALC298 patch as well as color coding in tutorial
  • 22. December 2016: FakeSMBios added

Accessories Appendix:

  • The official Dell adaptor DA200 (http://accessories.euro.dell.com/sna/productdetail.aspx?c=at&l=de&s=dhs&cs=atdhs1&sku=470-abry) works completly on Sierra 10.2.2. You can use the Network, USB, HDMI and VGA. Everything is Hot-Pluggable
  • a cheap 3rd party noname USB-C -> VGA adaptor didnt work
  • you can charge the Dell with a generic USB-C Power Adaptor, but USB-C has only a maximum power of 100W, so it's either charging OR usage, not both. Dont forget you need a special USB-C cable (Power Delivery 3.0) for charging.
Edited by wmchris

Share this post


Link to post
Share on other sites
Advertisement

I decided to join you, it's me, Gymnae.

I left a goodbye not on the other forum. Such stupid rules

 

Glad to see you in insanelymac.Thanks for your work on XPS 15 9550.

 

@wmchris

I have some question.

 

1、Does Clover r3899 support native nvram works on skl platform or just use nvram.plist?

2、My XPS 15 9550 have a usb bug,all the external devices can work perfectly expect my removable disk.When i plug in the mobile hard disk drive it have no effect or no reaction and it doesn't show in my usb devices,but usb mouse,usb keyboard and usb disk either usb2.0 and usb3.0 works fine.it can be solved by plug in the mobile hard disk drive when boot up and it will show in the usb devices and works fine.I want to know what cause it and how to solve it.

Share this post


Link to post
Share on other sites

Glad to see you in insanelymac.Thanks for your work on XPS 15 9550.

 

@wmchris

I have some question.

 

1、Does Clover r3899 support native nvram works on skl platform or just use nvram.plist?

2、My XPS 15 9550 have a usb bug,all the external devices can work perfectly expect my removable disk.When i plug in the mobile hard disk drive it have no effect or no reaction and it doesn't show in my usb devices,but usb mouse,usb keyboard and usb disk either usb2.0 and usb3.0 works fine.it can be solved by plug in the mobile hard disk drive when boot up and it will show in the usb devices and works fine.I want to know what cause it and how to solve it.

3899 doesnt have native nvram support, but the nvram emulator works.

your external hdd problem sounds more like a power consumption problem. did you check that the controller used in this hard drive advertises itself for higher power submission? most cheap controllers dont do it properly and require an Y USB cable. Just tried by myself with two different 2,5" external HDDs (one original apple oem sata drive in an enclosure ;)) and it worked fine.

Share this post


Link to post
Share on other sites

your external hdd problem sounds more like a power consumption problem. did you check that the controller used in this hard drive advertises itself for higher power submission? most cheap controllers dont do it properly and require an Y USB cable. Just tried by myself with two different 2,5" external HDDs (one original apple oem sata drive in an enclosure ;)) and it worked fine.

 

I use a external hdd box with usb3.0 output and works fine in windows and fine in 10.11.x but can't work properly in 10.12.x and i found it may be need additional current.

 

However when i plug in the box when start up it works fine but when i plug off and plug in again it disappear again and it very strange.

 

Ps:my external hdd box is standard usb port and it can't use Y USB cable...

Share this post


Link to post
Share on other sites

can you try it on a regular macbook to check if it's incompatible with OSX 10.12 or a problem with your setup?

Can you try using it with the USB-C port and the latest hotplug hack i uploaded? This port uses a different USB hardware.

Share this post


Link to post
Share on other sites

Okay guys i want your input. Is it worth installing Sierra or shoud we stay on El Capitan? I know I have to wipe my ssd before installing Sierra. Otherwise it wont install

Share this post


Link to post
Share on other sites

Sierra is much more stable and offers more hardware compatibility than el.cap. No drawbacks - only improvement (except with guijiangs hdd)

Okay. Is is better to fresh install Sierra or can I upgrade El Capitan to Sierra?

 

Sent from my VS986 using Tapatalk

Share this post


Link to post
Share on other sites

You can safely upgrade from el cap - but be sure to have working kexts and patches at hand

I have tried to upgrade to Sierra using el Capitan, but nothing gets upgraded. Sorry about this question. Am I missing something?

 

After trying to upgrade from El Capitan to Sierra without success. I decided to do a clean install. I successfully  installed Sierra now. But I am in the process of patching my system the way it was before.

Edited by hackedWifi

Share this post


Link to post
Share on other sites

one problem is that the installer often wants to add some computer specific patches first - most likely firmware updates. if these fail it will not continue the setup. I had this problem all the time even with normal security updates, most likely because i use an old, unpatched (and valid original) MacBookPro9,1 SMBIOS.

Share this post


Link to post
Share on other sites

Trying to get swiping with 2 fingers on trackpad forward & backward in Safari to work.  Other gestures work fine.

 

Thanks for a great guide!

 

Happy New Year

Share this post


Link to post
Share on other sites

Good to see you back, @wmchris.

 

But, it seems every time I ask, the thread gets deleted. I'm still trying to get usb-c working. My problem is now that I get a KP with the Macbook9,1 smbios as generated by clover. It worked under Macbook Pro 13,3 but even that won't boot now and I'm back on the iMac smbios that came in the post-install.

 

Any advice.

Share this post


Link to post
Share on other sites

HDMI & audio don't work. But thank you so much fot this post I got a lot further now.

You'll need to change your smbios for the HDMI. Macbook9,1 is apparently the best, but I've been having issues.

 

I've had problems with audio. Booting with headphones plugged in has helped in the past.

 

Sent from my Nexus 6P using Tapatalk

Share this post


Link to post
Share on other sites

You'll need to change your smbios for the HDMI. Macbook9,1 is apparently the best, but I've been having issues.

 

I've had problems with audio. Booting with headphones plugged in has helped in the past.

 

Sent from my Nexus 6P using Tapatalk

Managed to get HDMI working.

>Found my board ID

>Searched it in /S/E/AppleGraphicsControl.kext/contents/plugin/AppleGraphicePolicy.kext/contents/info.plist

>The line under my Board id I changed "Config2" to "none"

 

Rebuilded kextcache & rebooten.

Shoutout tot Goodwin

Share this post


Link to post
Share on other sites

Hi, for everyone who have a problem with Thunderbolt 3/USB 3.1 Type C port and its hotplug function I have working solution created by dpassmor. Luckily I managed to apply his patch with ssdt to mine config.plist before entire thread has been deleted.

 

Add the following to ACPI/DSDT/Patches:

<dict>
<key>Comment</key>
<string>rename _RMV to XRMV</string>                                        
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
X1JNVg==
</data>
<key>Replace</key>
<data>
WFJNVg==
</data>
</dict>

Then under ACPI/DropTables add following:

<dict>
<key>Signature</key>
<string>SSDT</string>
<key>TableId</key>
<string>xh_rvp10</string>
</dict>

And it’s last adjustment to the config.plist. You need to add this under KernelAndKextPatches/KextsToPatch:

<dict>
<key>Comment</key>
<string>10.12.2 fudge USB 3.1 device ID</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<string>30783135623638303836</string>
<key>InfoPlistPatch</key>
<true/>
<key>Name</key>
<string>AppleUSBXHCIPCI</string>
<key>Replace</key>
<string>30783135623538303836</string>
</dict>

The last step it is to compile SSDT-TB and add it to your ACPI/Patched folder, then reboot.

 

Now I can confirm that my HooToo thunderbolt3 to hdmi, usb and microsd card reader adapter works fine thanks for dpassmor.

SSDT-TB.dsl.zip

Share this post


Link to post
Share on other sites

Hi, for everyone who have a problem with Thunderbolt 3/USB 3.1 Type C port and its hotplug function I have working solution created by dpassmor. Luckily I managed to apply his patch with ssdt to mine config.plist before entire thread has been deleted.

 

Add the following to ACPI/DSDT/Patches:

<dict>
<key>Comment</key>
<string>rename _RMV to XRMV</string>										
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
X1JNVg==
</data>
<key>Replace</key>
<data>
WFJNVg==
</data>
</dict>
Then under ACPI/DropTables add following:
<dict>
<key>Signature</key>
<string>SSDT</string>
<key>TableId</key>
<string>xh_rvp10</string>
</dict>
And it’s last adjustment to the config.plist. You need to add this under KernelAndKextPatches/KextsToPatch:
<dict>
<key>Comment</key>
<string>10.12.2 fudge USB 3.1 device ID</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<string>30783135623638303836</string>
<key>InfoPlistPatch</key>
<true/>
<key>Name</key>
<string>AppleUSBXHCIPCI</string>
<key>Replace</key>
<string>30783135623538303836</string>
</dict>
The last step it is to compile SSDT-TB and add it to your ACPI/Patched folder, then reboot.

 

Now I can confirm that my HooToo thunderbolt3 to hdmi, usb and microsd card reader adapter works fine thanks for dpassmor.

This gives you hot-plug on the type C port?

 

What smbios are you using?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By BiggestDrugo
      Hi, I have an MSI 945gcm5 v2 and was wondering if it's possible to run Hackintosh High Sierra on this board? It will run Lion, but my guess is that the chipset and various other factors will prevent an upgrade to High Sierra. Any thoughts?
    • By plasticduck35
      I have a hackintosh running 10.13.5 (High Serria) that works except it doesn't shutdown properly and it doesn't seem to be going to sleep. 
       
      Here are some diagnostics that I gathered 
       
      Davids-MacBook-Air-2:~ davidozersky$ sudo pmset -g Password: System-wide power settings: Currently in use: hibernatemode 0 womp 0 networkoversleep 0 sleep 5 (sleep prevented by diskmanagementd, UserEventAgent, mds, diskarbitrationd, coreaudiod, mds_stores, Disk Utility) Sleep On Power Button 1 ttyskeepawake 1 hibernatefile /var/vm/sleepimage disksleep 10 displaysleep 5  
      And I've attached files from a RunMe utility app I've found online. 
       
       
      Any ideas? 
       
      Thank you, 
      David
      runmereport.ioreg
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Pro and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Pro, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8700k, 9600k, 9700k, 9900k
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install.
       
       
      HARDWARE USED
      • Intel I9 9900k 
      • Gigabyte AORUS Z390 PRO
      • Sapphire Nitro+ SE Vega56 ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • Coolermaster MASTERLIQUID ML360R RGB CPU Cooler
      • Samsung 970 EVO 1TB NVMe SSD macOS Mojave
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       
       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
       
       
      CLOVER  FOLDER
      Use this folder with fully patched DSDT
      Z390 Pro DSDT EFI.zip   (Updated 21 July 2019)
       
       
      ADDITIONAL DSDT's  (A big thanks to @MaLd0n for compiling these extra DSDT's)
      If your using a Vega 56/64 or Radion VII then use this DSDT (already installed in my EFI)
      DSDT.VEGA.VII.zip
      If your using a RX Series or Nvidia GPU then use this DSDT
      DSDT.RXxxx.NVIDIA.zip
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&amp;t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      Clover
      Clover Configurator
      Kext Updater
       
       
      OPTIONAL DOWNLOADS
      AirportBrcmFixup.kext    (If your Wifi Card isn't working after installing my EFI then add the AirportBrcmFixup.kext to your clover kext folder and reboot)
      FakeSMC    (Can be used instead of VirtualSMC)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F10)
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Enabled  (Can be set to disabled depending on what GPU you use)
       
      • MIT → Advanced Memory Settings  → Extreme Memory Profile (X.M.P) → Enabled  
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Enabled  (can be enabled or disabled, your choice)
      • Chipset → Internal Graphics → Disabled
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Disabled 
       
      • Power → Platform Power Management → Enabled
      • Power → ErP → Enabled  (can be enabled or disabled, your choice)
      • Power → RC6 (Render Standby) → Disabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

       

       

       

       

    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/download/file.php?id=24376
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
×