Jump to content
wmchris

[GUIDE] Dell XPS 15 (9550) Mojave 10.14 / 10.15 Quick Installation

1,606 posts in this topic

Recommended Posts

I tried reinstalling clover, this time booted up from cloverx64.efi, but it still stalls at the same place. Tried putting the AppleACPIPlatform.kext on usb EFI but it still stalls at the same place. Redownloaded the image, created the USB drive again, same error.

 

 

 

 

 

 

Mine is i7, same as yours, just samsungs nvme. Judging by the description Lockzi left he is using one too.

 

Yes, i7

 

Got it working by removing the emuvariable driver as well as downloading the latest cover instead of the one Pandora uses.

 

Apparently it seems like it's because of our integrated GPU.

Share this post


Link to post
Share on other sites
Advertisement

I just managed to get past the kextd stalld AppleACPICPU message, by using some of the files from darkhandz repo. Removing the /EFI/CLOVER/kexts/10.13 folder and moving everything in the /EFI/CLOVER/kexts/Other. Create the folder if it doesn't exist. Also replaced everything in the drivers64UEFI with the files from darkhandz repo. I am now waiting for upgrade to finish. 

Share this post


Link to post
Share on other sites

Thank you. My brightness works in display already. I just need the keys f11 and f12 to work.

Mine are working properly once i had installed all the required kexts. 

 

 

@wmchris, is it safe to use different SMBIOS? One from MBP13,3? It has a different CPU then the one we are using. Only thing that I am missing currently is sound over HDMI. 

Share this post


Link to post
Share on other sites

So it looks like Pandora isn’t installing the latest version of Clover (R. 4220), so I reformatted my USB sticks, re-downloaded the Sierra installation app, and tried again. This time I ran Hermes in “createinstallmedia” mode, and then installed Clover separately into the USB drive using the EFI v2 bootloader in UEFI-only mode. Swapped out the Clover folder for the files here, etc, and it still gave me the FakeSMC rebuild error. Good news is that my USB 3.0 drive is no longer giving me the garbled text error, so I’ve switched to using that drive for this installation.

 

I then tried reformatting and creating the Sierra USB boot using this tutorial here

http://www.imachak.tk/2016/12/install-create-macos-sierra-usb-boot-with-clover-bootloader.htm

and installed to the USB by entering this command into terminal:

sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ Sierra.app --nointeraction

I re-installed the Clover bootloader to the USB stick, and still got the error before freezing:

 

 

 

Here’s the rest of the viewable verbose log in case there’s anything important that I’m not seeing. There appear to be a few errors towards the bottom of the image, including a failure to bootstrap to path = /Library/LaunchAgents:

 

 

Running Clover in safe mode using the “-s” flag causes this error to come up instead before freezing:

considerRebuildOfPrelinkedKernel prebuild rebuild has expired

Still not entirely sure how to try to fix this.

 

Did you ever end up fixing this? I am having the exact same issue. I'm using OsxAptioFix2Drv-free2000.efi with slide=15 and it lets me boot, but I only ever get to this error. I also don't have the right network card (intel one also) so I feel like that might be the issue? 

Share this post


Link to post
Share on other sites

Mine are working properly once i had installed all the required kexts. 

 

 

@wmchris, is it safe to use different SMBIOS? One from MBP13,3? It has a different CPU then the one we are using. Only thing that I am missing currently is sound over HDMI. 

totally safe.

 

Regarding your problem: i dont have the samsung ssd, so yea its possible something is incompatible in my repository with this particular ssd. Would be really great if someone would be able to find the real reason and fix (beside simply overwriting everything with another clover version ;-))

 

Afaik it's possible that the kexts are not loaded, because i put them in the 10.13 folder and the installer itself is not "identified" as a high sierra system. I only did the upgrade from 10.12 to 10.13 with my files. maybe just moving from 10.13 to "Other" is enough to make it work. Can you check that?

Share this post


Link to post
Share on other sites

Afaik it's possible that the kexts are not loaded, because i put them in the 10.13 folder and the installer itself is not "identified" as a high sierra system. I only did the upgrade from 10.12 to 10.13 with my files. maybe just moving from 10.13 to "Other" is enough to make it work. Can you check that?

 

I can not confirm by facts, exactly that is my experience based on the two re-installations I've done. Another thing I would like to add was that once the first installation failed (firmware unsupported error), I  had to reformat the whole disk to HFS (from APFS) in order to get it working again.

 

I created another partition as place holder for Windows 10 at the end of the drive.

Has anyone installed Windows 10 (dual boot, not bootcamp) after High Sierra with APFS? Worried about it overwriting the partition scheme and screwing something up...

Share this post


Link to post
Share on other sites

totally safe.

 

Regarding your problem: i dont have the samsung ssd, so yea its possible something is incompatible in my repository with this particular ssd. Would be really great if someone would be able to find the real reason and fix (beside simply overwriting everything with another clover version ;-))

 

Afaik it's possible that the kexts are not loaded, because i put them in the 10.13 folder and the installer itself is not "identified" as a high sierra system. I only did the upgrade from 10.12 to 10.13 with my files. maybe just moving from 10.13 to "Other" is enough to make it work. Can you check that?

 

There is no difference between your repo files and the ones that I used in my run. Did a binary compare and they are completely the same. So only difference was that I put everything in the "Other" folder instead of the "10.13" folder. Probably has something to do with Clover not recognising the installer version as you said. 

 

Maybe update the github with this as the one of the possible solutions for the kextd stall AppleACPICPU error?

Share this post


Link to post
Share on other sites

There is no difference between your repo files and the ones that I used in my run. Did a binary compare and they are completely the same. So only difference was that I put everything in the "Other" folder instead of the "10.13" folder. Probably has something to do with Clover not recognising the installer version as you said. 

 

Maybe update the github with this as the one of the possible solutions for the kextd stall AppleACPICPU error?

already done. it's just strange that it works on an upgrade, but not on a fresh install. :-) I actually thought it would be the other way around.

I can not confirm by facts, exactly that is my experience based on the two re-installations I've done. Another thing I would like to add was that once the first installation failed (firmware unsupported error), I  had to reformat the whole disk to HFS (from APFS) in order to get it working again.

 

I created another partition as place holder for Windows 10 at the end of the drive.

Has anyone installed Windows 10 (dual boot, not bootcamp) after High Sierra with APFS? Worried about it overwriting the partition scheme and screwing something up...

 

may you tell me more about the "firmware unsupported error"? how did you fix it?

there shouldnt be a problem with win10, as long as you already have a partition for it. The only problem is, that the installer of high sierra (step 2 after reboot) may not work with two available partitions and enabled NVRam Emulation - and you cant resize the current AFPS partition after creation without possible harm to your FS.

Share this post


Link to post
Share on other sites

already done. it's just strange that it works on an upgrade, but not on a fresh install. :-) I actually thought it would be the other way around.

 

may you tell me more about the "firmware unsupported error"? how did you fix it?

I had to disable (rename/remove) the EmuVariableUefi-64.efi, it apparently has to do with our NVIDIA GPUs (source: http://hackintosher.com/guides/high-sierra-fix-macos-not-installed-computer/)

 

/dev/disk0 (internal):

   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                         1.0 TB     disk0
   1:                        EFI EFI                     314.6 MB   disk0s1
   2:                 Apple_APFS Container disk1         980.1 GB   disk0s2
   3:                  Apple_HFS Win10                   43.6 GB    disk0s3
 

 

I'll go along with installing win10 now through bootable USB - hoping for the best!

 

UPDATE:

There's no problem dual booting High Sierra APFS with Win10!

Share this post


Link to post
Share on other sites

totally safe.

 

Regarding your problem: i dont have the samsung ssd, so yea its possible something is incompatible in my repository with this particular ssd. Would be really great if someone would be able to find the real reason and fix (beside simply overwriting everything with another clover version ;-))

 

Afaik it's possible that the kexts are not loaded, because i put them in the 10.13 folder and the installer itself is not "identified" as a high sierra system. I only did the upgrade from 10.12 to 10.13 with my files. maybe just moving from 10.13 to "Other" is enough to make it work. Can you check that?

Thank you for taking the time to put this tutorial up. A few inputs for you. Is it possible to post your laptop specifications? so we all know what to expect when facing with issues.

I am on 12.6 right now alongside Windows and Archlinux. Is it safe for me to update to 13.2 now. I don't care about losing windows, but Archlinux cannot be screwed up. Thank you

 

Sent from my Pixel XL using Tapatalk

Share this post


Link to post
Share on other sites

I had to disable (rename/remove) the EmuVariableUefi-64.efi, it apparently has to do with our NVIDIA GPUs (source: http://hackintosher.com/guides/high-sierra-fix-macos-not-installed-computer/)

i had this fix in step7 of the tutorial, because i had to remove it, too - but there was no "firmware unsupported error" - just a random lock. So maybe i should add your error to the tutorial. do you remember the exact wording?

Thank you for taking the time to put this tutorial up. A few inputs for you. Is it possible to post your laptop specifications? so we all know what to expect when facing with issues.

I am on 12.6 right now alongside Windows and Archlinux. Is it safe for me to update to 13.2 now. I don't care about losing windows, but Archlinux cannot be screwed up. Thank you

multiboot works fine, but i cannot guarantee, that everything works flawless on your installation. Random bugs occur, so upgrade at your own risk.

Only suggestion: remove EmuVariable extension from your upgrade boot media. see Lockzis post i mentioned above.

 

i have two 9550, one with FHD and XG3, one with UHD and LiteOn. Both have OSX as main OS. Dualboot with Windows on one machine.

Share this post


Link to post
Share on other sites

i had this fix in step7 of the tutorial, because i had to remove it, too - but there was no "firmware unsupported error" - just a random lock. So maybe i should add your error to the tutorial. do you remember the exact wording?

 

multiboot works fine, but i cannot guarantee, that everything works flawless on your installation. Random bugs occur, so upgrade at your own risk.

Only suggestion: remove EmuVariable extension from your upgrade boot media. see Lockzis post i mentioned above.

 

i have two 9550, one with FHD and XG3, one with UHD and LiteOn. Both have OSX as main OS. Dualboot with Windows on one machine.

I spend hours trying to boot into highsierra. I could not pass the osxaptiofixdrv cannot relocate kernel panic. I tried to boot back from the USB isntaller I got the same error. Very frustrating. Everything installed fine but botting back into the system was impossible

 

Sent from my Pixel XL using Tapatalk

Share this post


Link to post
Share on other sites

I spend hours trying to boot into highsierra. I could not pass the osxaptiofixdrv cannot relocate kernel panic. I tried to boot back from the USB isntaller I got the same error. Very frustrating. Everything installed fine but botting back into the system was impossible

 

Sent from my Pixel XL using Tapatalk

https://github.com/wmchris/DellXPS15-9550-OSX/blob/10.13/Tutorial_10.13_Step7.md#error-couldnt-allocate-runtime-area--unable-to-start-installer--unable-to-boot-at-all

 

you have to remove the old extension and replace it with osxaptiov2.

Share this post


Link to post
Share on other sites

Hey there, 

I have had a problem while installing 10.13.2 and  wanted to tell you about the problem and how I solved it, because it might help someone.

I was able to boot into the macos installation.

 

However, after first reboot the installation crashed and after rebooting again, macos installation failed with the message

 

macOS could not be installed on your computer

An error occurred while verifying firmware

I solved the problem by using OSXAptioFix2 and Clover r4289 (I had an older version of Clover).

After first reboot, the installation crashed again but then - after another reboot - everything installed without any further problems.

 

If someone knows why this happened and why it helped, one can tell me...

Share this post


Link to post
Share on other sites

Hey there, 

I have had a problem while installing 10.13.2 and  wanted to tell you about the problem and how I solved it, because it might help someone.

I was able to boot into the macos installation.

 

However, after first reboot the installation crashed and after rebooting again, macos installation failed with the message

 

macOS could not be installed on your computer

An error occurred while verifying firmware

I solved the problem by using OSXAptioFix2 and Clover r4289 (I had an older version of Clover).

After first reboot, the installation crashed again but then - after another reboot - everything installed without any further problems.

 

If someone knows why this happened and why it helped, one can tell me...

see literally the post above yours....

Share this post


Link to post
Share on other sites

I had to disable (rename/remove) the EmuVariableUefi-64.efi, it apparently has to do with our NVIDIA GPUs (source: http://hackintosher.com/guides/high-sierra-fix-macos-not-installed-computer/)

 

/dev/disk0 (internal):

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme 1.0 TB disk0

1: EFI EFI 314.6 MB disk0s1

2: Apple_APFS Container disk1 980.1 GB disk0s2

3: Apple_HFS Win10 43.6 GB disk0s3

 

 

I'll go along with installing win10 now through bootable USB - hoping for the best!

 

UPDATE:

There's no problem dual booting High Sierra APFS with Win10!

So are you using APFS as you filesystem now?

 

Sent from my Pixel XL using Tapatalk

Share this post


Link to post
Share on other sites

upgrading automatically converts the FS to AFPS. So..... yes.

For some weird reason I was able to finish the installation. With osxAptiov2. After getting the allocation error it finally booted up. After installing clover to ESp and rebooting I kept getting the allocated error. I cannot figure out how to calculate that from your profile. It is kind of course fusing. I was able to boot up with osxAptio2000.

 

Sent from my Pixel XL using Tapatalk

Share this post


Link to post
Share on other sites

I've noticed that the "disablehibernate.sh" script is failing because it's trying to remove a folder (sleepimage) without the "-r" flag.

It'd work better if changing this specific line to:
 

sudo rm -rf /private/var/vm/sleepimage

Another topic:

Is anyone having copy&paste issues on High Sierra?
After updating from Sierra, copy and paste won't work for some applications. It might not be a hackintosh specific issue, just checking.

BTW, thanks again for this guide, it sure saves a lot of time and it's very appreciated.

Cheers!


*Edit*

About the copy and paste issue, It happened because I've patched the core display (instead of running the Lilu version). I'll see if I still have the original kext (before the patch).

*Edit 2*

I've restored the original core display and the copy & paste issue is gone.

Share this post


Link to post
Share on other sites

I've noticed that the "disablehibernate.sh" script is failing because it's trying to remove a folder (sleepimage) without the "-r" flag.

 

It'd work better if changing this specific line to:

 

sudo rm -rf /private/var/vm/sleepimage

the sleepimage is afaik a flat file, not a directory

Share this post


Link to post
Share on other sites

i had this fix in step7 of the tutorial, because i had to remove it, too - but there was no "firmware unsupported error" - just a random lock. So maybe i should add your error to the tutorial. do you remember the exact wording?

 

 

Exact wording:

 

macOS could not be installed on your computer

 

An error occured while verifying firmware.

Quit the installer to restart your computer and try again.

 

 

 

If I recall right I opned the console and there it was a message about securityd killed all processes through sigterm due to "Firmware unsuported", but the wording above is what the installer wizard says.

Share this post


Link to post
Share on other sites

Did anyone get a blank Trackpad preferences panel in the System Preferences?

I have the same issue. My SMBIOS is set as iMac though and trying to switch it to MacBookPro13,3 results in a crash. Using Darkhandz config.plist does work though. But trying to change the serial numbers and stuff causes a crash. Don't understand it.

Share this post


Link to post
Share on other sites

I have the same issue. My SMBIOS is set as iMac though and trying to switch it to MacBookPro13,3 results in a crash. Using Darkhandz config.plist does work though. But trying to change the serial numbers and stuff causes a crash. Don't understand it.

have a blank trackpad, too. same as on sierra.

i cant confirm this. i changed my smbios to MBP13,3 on one machine and to MBP9 to another - works without any problem.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Tushark2
      Hello,
      1st my laptop spec. 
      CPU - 2.53 GHz Intel Core i3 380m
      RAM - 6 GB 1333 MHz DDR3
      GPU -  1st gen Intel HD Graphics 288 MB
      Laptop - Dell Vostro 3500 series
      BT/WIFI - AzureWave BCM94352HMB
       
      I installed Olarila Mojave 10.14.6 and managed to install 1st gen intel HD graphics but it was bit laggy bcos this gnu doest support metal and its a old machine, so I decided to move to Olarila High Sierra.
      I installed it with most of things working fine expect some issues, for that I want to make SSDT and DSDT to make it run without glitches.
       
      I am atteching my sendme.zip , can some take a look to my current settings and suggest me some changes  
      (Olarila down from few days for me )
       
      Send me MacBook-Pro.zip
    • By t3s8r8
      Hi, anyone here got those problems like me ? When I click play, the film load nothing, just show blackscreen like this (attached) or when I download an episode to the computer, it shows error (err = -11800)

      Anyone here knows a fix ? Maybe a bug or problem from Hackintosh ?


    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?f=45&t=9172
       
      ---USB---
      https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By AJackTi
      Hello everyone.
       
      I am a newbie! I just update from Mojave to the newest Catalina Hackintosh. But I cannot connect to Wifi. And I find many solutions to this problem, but it cannot help me.
       
      Anyone who helps me to see my EFI has any error. 
       
      My Wifi: BCM94322HM8L
      My info laptop: Dell M4700 i7 3720QM 
      My EFI: https://drive.google.com/file/d/1fjy6DDZuEWbxiTcYFZCX2msqO5skRCU9/view?usp=sharing
       
      Thank you so much and sorry for English grammar. 
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Pro and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Pro, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware using Catalina 10.15.2
       
      CPU's
      8700k, 9600k, 9700k, 9900k
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install.
       
       
      HARDWARE USED
      • Intel I9 9900k 
      • Gigabyte AORUS Z390 PRO
      • Sapphire Nitro+ SE Vega56 (connected to monitor with DisplayPort)
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit. 
      • CoolerMaster MASTERLIQUID ML360R RGB CPU Cooler
      • Samsung 970 EVO 1TB NVMe SSD macOS Mojave
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       

       
       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar
       
       
      CLOVER  FOLDER
      Use this folder with fully patched DSDT
      Current EFI 
      Updated 15/01/2020
      Aorus Z390 Pro Vega Navi VII F12d EFI .zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 Vega, Navi (5700, 5700xt), Radeon VII DSDT Installed) SMBios 19,1
      Aorus Z390 Pro RX Polaris F12d EFI .zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 RX5XX Polaris DSDT Installed) SMBios 19,1
      HD630 Z390 Pro F12d EFI.zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 HD630 IGPU Only) SMBios 18,1
       
      PLEASE NOTE - Please flash your motherboard bios to revision F11 to use my current EFI. It’s a major rework of the bios and vital changes have been made to the layout and power tables. New DSDTs have been created and installed into the new EFI’s but will not work correctly with any other bios revision.
       
      Latest Gigabyte Z390 PRO BIOS (F12d)
      mb_bios_z390-aorus-pro_f12d.zip
       
       
      CFG Unlock (MSR) F12d BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - N-D-K Fork of OpenCore (16/01/2019)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      Clover
      Clover Configurator
      Kext Updater
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      FakeSMC    (Can be used instead of VirtualSMC)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11)
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup 
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

       

       

       

       
       
       
×