Jump to content
kosakgroove

[HELP] Native Power Management Intel Core Quad Q6600

10 posts in this topic

Recommended Posts

Hi guys, this is my first desktop Hackintosh
Specs are as follows:

Gigabyte EP45-UD3LR
Intel Core 2 Quad Q6600
NVIDIA Geforce 210 1024 MB VRAM

When using NullCPU power management you can see the temps are really great.

 

post-1517295-0-80889900-1481819239_thumb.png

 

The performance is definitely better without that kext, but when I am using no NullCPU and use the Generate P and C states options in Clover, along with Drop OEM SSDT, temps go up to 60ºC all the time, whether it is heavy load or idling.
I know the ssdtPRGen.sh doesnt work with this kind of CPU , which is not even properly recognized in mac....

 

post-1517295-0-64640800-1481819274_thumb.png

 

What should I do to get some native CPU power management up on this baby?
Thanks in advance. Here is my Clover folder

 

CLOVER.zip

Share this post


Link to post
Share on other sites
Advertisement

Works better performance-wise, but I am still stuck between 1.6GHz and 2.39GHz. CPU is always at one or the other frequencies, no in-between.

Does this look to you like a successful implementation of native power management? Not to me.

 

post-1517295-0-91244300-1481834728_thumb.png

Share this post


Link to post
Share on other sites

Please correct me if I am wrong but I think I was able to do it, since:
1- No NullCPU in my system anymore
2- I use Generate P and C states in Clover
3- 

Last login: Fri Dec 16 12:58:24 on ttys000
Joes-Power-Mac:~ joe$ kextstat|grep -y applelpc
   89    0 0xffffff7f826b0000 0x3000     0x3000     com.apple.driver.AppleLPC (1.7.0) <59 11 5 4 3>
Joes-Power-Mac:~ joe$ kextstat|grep -y appleintelcpu
   19    0 0xffffff7f8227d000 0x2b000    0x2b000    com.apple.driver.AppleIntelCPUPowerManagement (217.92.1) <7 6 5 4 3 1>
   27    0 0xffffff7f82278000 0x3000     0x3000     com.apple.driver.AppleIntelCPUPowerManagementClient (217.92.1) <7 6 5 4 3 1>
Joes-Power-Mac:~ joe$ kextstat|grep -y acpiplat
   12    1 0xffffff7f82587000 0x5f000    0x5f000    com.apple.driver.AppleACPIPlatform (2.0) <11 10 7 6 5 4 3 1>
Joes-Power-Mac:~ joe$ kextstat|grep -y acpi_smc
   62    0 0xffffff7f81a6f000 0x10000    0x10000    com.apple.driver.ACPI_SMC_PlatformPlugin (1.0.0) <61 60 59 11 10 7 6 5 4 3>

Attached is my EFI , please help and tell me if all is good

Temperatures went down to great levels:

post-1517295-0-44219700-1481893274_thumb.png

 

I did lose most of the LPC sensors I had before AppleLPC loaded, like CMOS battery Level, PSU voltages, but I honestly dont care, as long as its something purely cosmetical, that doesnt mean anything.
Is this good to rock guys?

 

Native Power EFI.zip

 

Share this post


Link to post
Share on other sites

u dont need EvOreboot.kext, restart in clover, shutdown in DSDT, _pts --> prepare to sleep

 

LPC try the clover patch and remove LPC_injector.kext, but ur dsdt have a lpc patch too

 

what ur system? Mavericks?

 

i attach ur patch mobo

patch EP45-UD3LR.txt

Share this post


Link to post
Share on other sites

Hi.

Your system is too old to generate proper SSDT for Power Management. And thus you have no need for it.

Try to use MacPro3,1 SMBios and enable Generate C/P States and also enable AsusAICPUPM under KernelAndKextPatches section. And then also remove NULLCPUPM.

LPC. Hmm. Actually this could be not related to AICPUPM.

Share this post


Link to post
Share on other sites

I am running OS X 10.9.5 Mavericks. I use a Cartri modded BIOS since it makes most of the DSDT patching made. I just modified a bit of it to my needs. I tried all LPC and shutdown patches I found and none work well. So I need custom LPC injector and I need EVO Reboot since it's the only way to shut this computer down totally when it uses OS X. I dont see what harm this kexts do.

 

I am using Mac Pro 3,1 SMBIOS and have no NullCPU anymore. The only problem now seems that it never goes lower than 1,60 GHz, even when idling....

 

I get 1,60 GHz, 2,13 GHz and 2,39 GHz , nothing more nothing less. Computer now oscilates between those states.


Temperatures are really great at the moment so I dont know, i can live with it in this state,

But if anyone can kindly help me further

 

post-1517295-0-52471200-1481903326_thumb.png


After a reboot the LPC sensors are all back, and AppleLPC.kext still loaded! Awesome  :)

 

 

post-1517295-0-01512400-1481903463_thumb.png

Share this post


Link to post
Share on other sites

I am running OS X 10.9.5 Mavericks. I use a Cartri modded BIOS since it makes most of the DSDT patching made. I just modified a bit of it to my needs. I tried all LPC and shutdown patches I found and none work well. So I need custom LPC injector and I need EVO Reboot since it's the only way to shut this computer down totally when it uses OS X. I dont see what harm this kexts do.

 

I am using Mac Pro 3,1 SMBIOS and have no NullCPU anymore. The only problem now seems that it never goes lower than 1,60 GHz, even when idling....

 

I get 1,60 GHz, 2,13 GHz and 2,39 GHz , nothing more nothing less. Computer now oscilates between those states.

Temperatures are really great at the moment so I dont know, i can live with it in this state,

But if anyone can kindly help me further

 

attachicon.gifScreen Shot 2016-12-16 at 15.53.44.png

why u use bios mod? Use original bios and full edit DSDT with folder http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=209505

Share this post


Link to post
Share on other sites

why u use bios mod? Use original bios and full edit DSDT with folder http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=209505

Result will be the same. I ran the Clover DSDT patching, the custom patched DSDT from Clover dump method, and I ended up settling  with modded BIOS which offers many features to my BIOS, and then dumped the tables from this BIOS and patched to my need.

I dont see any harm in it and it gave me a rock stable installation. I don't think I opened this post to put my methods, knowledge or ways to the test. I just would appreciate if you helped me with the CPU, not with the way I Hackintosh, specially when I am the only one with access to the hardware so...

Share this post


Link to post
Share on other sites

Result will be the same. I ran the Clover DSDT patching, the custom patched DSDT from Clover dump method, and I ended up settling  with modded BIOS which offers many features to my BIOS, and then dumped the tables from this BIOS and patched to my need.

I dont see any harm in it and it gave me a rock stable installation. I don't think I opened this post to put my methods, knowledge or ways to the test. I just would appreciate if you helped me with the CPU, not with the way I Hackintosh, specially when I am the only one with access to the hardware so...

ur way  :thumbsup_anim:

 

but, cartri edit DSDT and put into bios again, nothing more. ;) 

 

see u

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder   https://olarila.com/files/Clover.Folder/CLOVER.LGA775.zip   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.LGA775.zip     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Mojave Full DSDT patch http://olarila.com/forum/viewtopic.php?f=59&amp;t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By wise_rice
      I wanted to push watercooling to the most. Silent. Level. possible.
      While gaming and also for working.
      Quite a challenge and a lot to learn.
       
      Thoughts on water-cooling:
      It always depends on the use-case if water-cooling is more silent than air-cooling.
       
      My personal experience:
      Air-cooling is more silent in idle load scenarios (when you just do some easy tasks like browsing or office) Water-cooling is more silent for constant high load (e.g. when you are gaming/working for long times)  
      Tricks to get the water-cooling as silent as possible:
      Configure the BIOS to turn off the radiator-fans in Idle load scenarios. That leaves only the pump running. Undervolt the pump (to e.g. constant 7V).
      This works best, if you can plug the pump into a fan or pump header and assign a constant (lower that 100%) speed to it in the BIOS.
      If your BIOS does not allow that, you could use a resistor-adaptor to slow it down.  
      This project started before my 26 PowerMac G5 Case Modding Project
    • By suweiwilson
      I want to install High Sierra.
      I can get into the installation screen,but after the installer in my USB flash put something into my internal disk and I booted to "install macOS from internal disk",the following error occurred:

       
      my hardware:
      GA-x99m-gaming 5
      i7-6800k
      nvidia-gtx-970
       
      my EFI is in EFI.rar
       
      my error log is in Installer Log.txt.
      How to fix this problem?
      EFI.rar
×