Jump to content
midi-sama

[GUIDE] [10.12] Sierra on Tab!

85 posts in this topic

Recommended Posts

Ok ill be clear again, WHY ARE YOU STILL USING AtivHDA? I clearly stated the usage of AppleALC (use 1.0.19) which is better (waaaaay better) than any applehda patcher atm.

 

Anyway for your first problem, close it, and follow how to patch UPDD (ez as dat) or check my other patch under Samsung forum section (same section as this thread).

 

Sent from my SM-G930F using Tapatalk

I want to tell everyone here that Im discontinuing this project for now. My tablet broke, for some reason my bios is fried (not physically thankfully) and it wont turn on. Ill open a thread if anyone can help me with it.

 

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites
Advertisement

Ok ill be clear again, WHY ARE YOU STILL USING AtivHDA? I clearly stated the usage of AppleALC (use 1.0.19) which is better (waaaaay better) than any applehda patcher atm.

 

Anyway for your first problem, close it, and follow how to patch UPDD (ez as dat) or check my other patch under Samsung forum section (same section as this thread).

 

Sent from my SM-G930F using Tapatalk

I want to tell everyone here that Im discontinuing this project for now. My tablet broke, for some reason my bios is fried (not physically thankfully) and it wont turn on. Ill open a thread if anyone can help me with it.

 

Sent from my SM-G930F using Tapatalk

 

Sorry, but I'M NOT USING AtivHDA, I'm just telling Edwin what his problem is possibly. The same thing happened to me and I solved it.

 

I'll try your patch. Thank you.

Share this post


Link to post
Share on other sites

Ok ill be clear again, WHY ARE YOU STILL USING AtivHDA? I clearly stated the usage of AppleALC (use 1.0.19) which is better (waaaaay better) than any applehda patcher atm.

 

Anyway for your first problem, close it, and follow how to patch UPDD (ez as dat) or check my other patch under Samsung forum section (same section as this thread).

 

Sent from my SM-G930F using Tapatalk

I want to tell everyone here that Im discontinuing this project for now. My tablet broke, for some reason my bios is fried (not physically thankfully) and it wont turn on. Ill open a thread if anyone can help me with it.

 

Sent from my SM-G930F using Tapatalk

How do you patch UPDD. I myself have a method to bypass the trial it but some what complicated.

Oh I see. My approach is totally different. Thanks.

That way, I have 5 figures gesture

Share this post


Link to post
Share on other sites

How do you patch UPDD. I myself have a method to bypass the trial it but some what complicated.

Oh I see. My approach is totally different. Thanks.

That way, I have 5 figures gesture

 

What is your method?

Share this post


Link to post
Share on other sites

Your method is to re-install the trial UPDD driver every 24hours. How do you get multi-touch gesture?

It is impossible. Locked by Trial driver.

Share this post


Link to post
Share on other sites

Your method is to re-install the trial UPDD driver every 24hours. How do you get multi-touch gesture?

It is impossible. Locked by Trial driver.

I use the driver with the gestures app, and yes i get full gestures, but I reinstall each 24 hours. What's the issue here? If your method is better, you are welcomed to help, we need a better method for that!

Share this post


Link to post
Share on other sites

I use the driver with the gestures app, and yes i get full gestures, but I reinstall each 24 hours. What's the issue here? If your method is better, you are welcomed to help, we need a better method for that!

 

+1

Share this post


Link to post
Share on other sites

The touch drivers that I install (and stated in the guide) is specifically designed (and custom made) for ativ tab 7 from the touchbase website. The gestures files (that you can use too) have gestures close to windows' feel: swipe from the right to get notification pannel, from left for all apps, 5 pinching to maximize/zoom the window, 4 pinching for showing the desktop/launchpad like on real touchpad, 2 fingers for scrolling and going back and forward (touchpad gestures), 3 finders touch for either kyb invoking or search selected terms (changeable in the updd gestures settings), 3 finger flick to swipe between full-screen apps, long press for secondary menu. it's like a real touchpad with some windows inspired gestures. Your method is the same, I dont see any difference in your video, unless you've bought the software, well that's another thing.

Share this post


Link to post
Share on other sites

I don't know if your activ driver is a license or not but without a license, then multiple-ginger is locked. I have tried and it is true 

My Yoga use general downloaded driver from Touch-base and without my hacking, 5-fingers gesture is not avaiable. Also I dont have to re-install the driver any more 

Share this post


Link to post
Share on other sites

I don't know if your activ driver is a license or not but without a license, then multiple-ginger is locked. I have tried and it is true 

My Yoga use general downloaded driver from Touch-base and without my hacking, 5-fingers gesture is not avaiable. Also I dont have to re-install the driver any more 

 

Bla, bla, bla... Obviously you do not want to reveal your method (if you have one).

Share this post


Link to post
Share on other sites

I don't know if your activ driver is a license or not but without a license, then multiple-ginger is locked. I have tried and it is true 

My Yoga use general downloaded driver from Touch-base and without my hacking, 5-fingers gesture is not avaiable. Also I dont have to re-install the driver any more 

 

Ok here a screenshot of the official driver from UPDD for our tab: 

eB4oF1j.png

 

If you dont want to give your hacking publicity, you can PM me anytime and talk it over. I'm open to all suggestions.

Share this post


Link to post
Share on other sites

Bla, bla, bla... Obviously you do not want to reveal your method (if you have one).

Because if you have a working method so you dont need mine. But I am not sure if your tailor driver is licensed or not 

Link please? It means Dave gives you the special version for free?

If it is the case then other touch-controller owner want to be given a free driver too.

Share this post


Link to post
Share on other sites

Because if you have a working method so you dont need mine. But I am not sure if your tailor driver is licensed or not 

Link please? It means Dave gives you the special version for free?

 

I do not have any method. I came here asking for help.

If you want to make money, you should have started there. Thanks but no. Everyone here helps for free.

Share this post


Link to post
Share on other sites

Claro, claro...

Can you share us here how fairly do you have him delivered the multi-finger gesture for evaluation?

My controller is Elan 0x2089 which is not official listed so I contacted Dave to have it added to the list. 

And I got him sent a 2 finger gesture evaluation version as everyone else.

Correct me if I am wrong?

Is it fair?

Some thing seems free but it is not free or un-fair!

Share this post


Link to post
Share on other sites

Can you share us here how fairly do you have him delivered the multi-finger gesture for evaluation?

My controller is Elan 0x2089 which is not official listed so I contacted Dave to have it added to the list. 

And I got him sent a 2 finger gesture evaluation version as everyone else.

Correct me if I am wrong?

Is it fair?

Some thing seems free but it is not free or un-fair!

 

Mmmmm... Who the {censored} are you talking to? I have already said clearly that I have no driver installed for multi-touch gestures. It does not work, when I finish installing it I receive a message that says "the evaluation period has expired" (immediately after installing it).

Pesetero de los cojones...

Share this post


Link to post
Share on other sites

Guys, stop it this instance! We're here to share knowledge not to argue about who got the best way. I would really like to see his method if it can help, also I would also help him and make a better tool to work with. The only retarded here is UPDD for making a crapoy software for a price as high as the skies, I would actually congratulate them for their work ok the driver on different devices worldwidely. But here is the issue: we got an official installer with the drivers and a working UPDD Gestures that is reinstallable and working with full touch support, while other didnt get support as much as us (Ativ and Surface users). If in the end we find a viable way to give everyone the opportunity to use UPDD Gestures on any device without conflicts that would be the best thing to happen to Osx86. Actually i would love to see developers here work on some kind of alternative driver to UPDD, that would be great for the whole community!

Share this post


Link to post
Share on other sites

Fortunately there are people working on better (and free) solutions. Unfortunately these solutions do not work on all tablets.

 

 

VoodooI2C

 

The main project is located here - https://github.com/alexandred/VoodooI2C

Compiled from the master, you will only have single touch functionality. 

 

If you want all the gestures I demonstrated in the video, then either use the VoodooI2C kext I attached or build it with XCode from my fork here - https://github.com/blankmac/VoodooI2C/tree/FiveFingerGestures/VoodooI2C

 

 

Available Gestures

 

  • Two Finger Scrolling
  • Three Finger Swipes (These are stock and don’t need configuring)
    • Left – Control+LeftArrow – Mission Contrrol move one desktop left
    • Right – Control+RightArrow – MC move one desktop right
    • Up – Control+UpArrow – Show Mission Control
    • Down – Show Application Window
  • Four Finger Swipes (Some need setup)
    • Left – Command+Q  Quit application
    • Down – Command+W Close Window (Or tab in a browser)
    • Right – F11 Show Desktop
    • Up – Control+F11 LaunchPad (must turn it on and set the shortcut in System Preferences)
  • Five Finger Swipes (Some need setup)
    • Left – Control+F9 Show notification center (must setup in System Preferences)
    • Down – Command+F11 Turn Dock hiding on/off (must setup in System Preferences)
    • Right – Command+Space Show Spotlight search
    • Up – Control+F10 In my system this launches an automator service which launches ‘KeyUp’, an onscreen keyboard app.  Highly recommended, but set this shortcut or any of the preceding to whatever you prefer, obviously.

 

I extrapolated the four and five finger gestures as the original project stops at three and was intended for a trackpad.  The developer of the gesture engine (@CoolStar on github) has said he may add additional ones.  As long as I own the Elite, I will continue to update and refine the touchscreen where and when possible.

 

 

Original thread: http://www.insanelymac.com/forum/topic/319055-hp-elite-x2-1012/

Share this post


Link to post
Share on other sites

ok guys, here is a utility that I found that replaces PlistEdit Pro, and works on every (EVERY) OS, since it's a website!

http://tustin2121.github.io/jsPlistor/

Just copy the content of a plist and paste it in the Import... box.

Share this post


Link to post
Share on other sites

Dear COmmunity,

 

I have followed the guide but can't get the install to start, Clover loaded, but when I select to install it just sits there, and any key on the tab that I press, returns me to the bios setup. Currently, there is an osx install on the sdd.

 

Any leads?

Share this post


Link to post
Share on other sites

Well, i've just updated to High Sierra (latest Public beta and possible GM). Updated Clover to the last version (r4200) and the kexts in the Other folder (AppleAlc, etc so you have sound after the update). Of course no Wacom drivers yet, but everything else is working fine, APFS included. Noticeable faster for me, too.

Share this post


Link to post
Share on other sites

Dear COmmunity,

 

I have followed the guide but can't get the install to start, Clover loaded, but when I select to install it just sits there, and any key on the tab that I press, returns me to the bios setup. Currently, there is an osx install on the sdd.

 

Any leads?

 

I can upload a copy of my Clover folder if you want it.

Share this post


Link to post
Share on other sites

Well, i've just updated to High Sierra (latest Public beta and possible GM). Updated Clover to the last version (r4200) and the kexts in the Other folder (AppleAlc, etc so you have sound after the update). Of course no Wacom drivers yet, but everything else is working fine, APFS included. Noticeable faster for me, too.

sadly, my tablet has a broken screen now (made sure of that), and I dont seem to find an alternative. My fan is pulsing and I dont know why, also the SUB part of the motherboard (with wifi-3G-wacom connector) broke and I cant find a replacement. if Anyone knows how to repair that and what parts I need, please PM me. Thanks.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DiddyKong
      Fully optimizing DSDT & SSDT for OS X Sierra POST INSTALL on a Dell345MT with a i7 - 920(first gen) 
       
      I know how this forum feels about 3rd party software, but that was just a crutch, I'm 100% vanilla now which is why I'm now posting for help because I eliminated the possibility having to do with 3rd party. Anyways, with that said I just have a couple things I want to be sure of.
       
      I used a n---bistro to get a App Store copy of Sierra, as I didn't know there were other ways of getting it now from a windows10 machine. anyways, I was able to build a vanilla usb. I couldn't figure the EFI out on my vanilla Sierra-usb, but the EFI on the usb-ni---bistro I had would boot my pre-install and post-install. so I was able to install Sierra. After a few days of figuring out how to remake a EFI and config, I broke my EFI.
      So back to my windows10 SSD and I found BootDiskUtility, and that made a EFI usb with the newest version of clover(r4895). So then swapped SSDs back to my OS X, plugged in the BDU-usb, after trial and error I got back into my Sierra. Now with the newest version of clover and no traces of ni---bistro anymore. Then copied the BDU-usb to my SSD EFI and was able to boot without a usb again!! YAY.
       
      Then starting working on fixing my web drivers for my gtx 1050 2gb. Installed the os update so i'm at 10.12.6, pulled my hair out figuring out the web drivers, eventually got them installed and the cuda fixed.
       
      Now all 3 of my screens work, yet windows can't sit 'between' screens, I just simply haven't looked for that fix yet as I want the sys itself running like a top first.
      My screen saver works, I don't get stuck in screensaver, I did once before, I believe lilu.kext and whatevergreen.kext fixed that.
      Now with all that I felt it was time to give my config.plist a diet cos it was bloated, I generated a config copied the clover settings check for check instead of coping text cos I'm trying to shrink it.
      Config.plist boots my system with DSDT-1FE7B5D7
       
      So after the above, This is now where I'm stuck
       a 100% correct DSDT and SSDT, from my understanding with a patched DSDT I wouldn't need any options selected in clover on the ACPI page?
       
      So with the patching part that I think I understand how to do it now, but when I extract with F4 every file has RSDT in front of it, I have one that says RSDP.aml and RSDT.aml
      so would I just erase the RSDT from the beginning of each file then go from their, which would then leave me with a DSDT.aml and 17 SSDTs?
      I know I have to decompile and patch them, but with my file names[DSDT table extract] not matching tutorials online I'm having a difficult time understanding which files I need.
      IS the RDST-DSDT.aml my DSDT? it is the biggest file.
      which ones that have SSDT in the filename is the SSDT(s) I need to patch?
       
      also how do I know if everything is patched correctly? like if my CPU is fully working and not just sorta working that way when I start running software like photoshop, unity, 10 chrome tabs, my hackintosh doesn't crash
       
      System details
      i7 920 (first gen) very similar to nehelam
      GeForce 1050 2Gb (3 monitors connected all work, one acer on HD connection, two HP s2031 on HD, using adapters to change all ports on GPU card to HD for screens)
          display port, HDMI, and HD
      4x 1Gg + 2x 8Gb RAM running at 1066 after injecting smbios with ram info macOS sees all my ram correctly
      Samsung SSD 860 EVO 500Gb
       
      Thanks to anyone that can help me out, I've been working on my system for about two weeks and this is basically the wall I finally can't seem to figure out how to pass
      I can post another info also if it helps
       
      Boot.log
      DSDTdump.Log

    • By mikmavros
      Thanks for accepting
      I recently installed Sierra  and I encounter the following problem ... When I restart or I start up my machine return to BIOS. If anyone knows and can any help be valuable Thank you very much. (When I boot from a Capitan disk in the same machine all  is running well.) Both discs with Clover in Legacy mode.
      gigabyte z68x-ud5-b3 F8
      I7 2600K
      GT 620 ( την βλέπει κανονικά χωρίς Web drivers)
      16 GB ddr3 1600 


    • By NoEnd
      Hi team,
       
      I have tried to update to security update 2019-001 multiple time with no luck, today I've booted the update with -verbose and attached videos shows the details.
       
      Appreciate your help
       
      Thanks
      Untitled.mov
    • By JhonneR
      Good morning, everyone, I'm sorry if I was wrong in choosing the topic but I need help.
      I have found it extremely difficult to mount a Hackintosh in my acer.
      Setup;
      I5 2430m 2.4 6GB RAM
      Mobo P5we0 - Intel intel Graphics 3000
      At the moment I have not found out what my audio codecs are.
      but I'll leave the link on the motherboard.
      however, my real problem is several.
      I have already used the itakos image, I have already used several images that could be installed normally and that after installing the image I do not have internet via cable or wireless.
      And another, I already looked in other forums and I know that I will be called a donkey in the logical question but I have not been able to install the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] or clover to start from the Hard Disk, so I do not know what to do.At the moment I still do not know if there has already been someone who has already installed the High Sierra or just the Sierra in this notebook model and obtained permanent success.
      If anyone can help me, I'll be grateful.
      Installations without success, but with the system already installed in ACER;
      SIERRA
      HIGH SIERRA
      MOJAVE
      All with the same symptom. Starting only by the bootable USB stick and without internet connection via cable and wireless.
      Appreciate ! Acer 5750 Official Page
    • By gengik84
      Ciro82==>>Thanks
      Uno dei tre Requisiti:
      Hack funzionante Mac vero Macchina virtuale Impostazioni Bios per il boot:
      Cercate una voce  del tipo “Sata Mode”e settatela  in AHCI
      Secure Boot: disabilitare o altri sistemi operativi
      CSM: UEFI o LEGACY, oppure a secondo del tipo di installazione
      VT-x / VT-d disable
      *Nota: Secure boot e csm valido solo per bios UEFI
      Materiale Occorrente 
      "OS X (Versione App.Store)”
      USB 8GB  *nota: nel caso di usb superiori dovrà essere partizionata, in modo da avere una partizione su cui "lavoreremo,di questa dimensione
      ShowAllfiles 
      kext Wizard 
      Bootloader Clover_2.3k_r xxx:                   http: //sourceforge.n.../cloverefiboot/
      Clover Configurator:                                    http: //mackie100proj...a.org/download/
      FakeSmc.kext:                                            https://github.com/kozlek/HWSensors/releases
      In allegato,a fondo pagina troverete un "pacchetto" contenente : ShowAllfiles, Kext Wizard, FakeSmc.kext: 
      App alternative:
      ESP Mounter Pro: per montare la partizione EFI
      Vi illustrerò tre metodi per creare la usb, ma sono ben distinti… quindi usatene soltanto uno
      Metodo 1: “Install Mac_OS_X.command” Metodo 2: “Create Install Media di Apple” Metodo 3:  Metodo Manuale Alla fine delle preparazione dell’installer, tutti i metodi necessitano l’installazione del Bootloader Clover sulla a vostra USB.
      “CONDIZIONI OBBLIGATORIE”
      PUNTO 1: che la vostra usb sia stata preventivamente nominata USB (caratteri maiuscoli) Tabella di partizione GUID e la formattazione in  Mac esteso Journaled.
      PUNTO 2: che l’installer di OSX si trovi in Applicazioni
      Utility Disco 
      Selezionate la pendrive, andate su “partizione”, selezionate “1 partizione”, impostate Mac OS esteso journaled e date il nome USB, poi in basso cliccate su opzioni e scegliete Tabella partizione (GUID), poi “applica”.
      Immagine 
      Riporto nuovamente l’operazione sopra citata adoperando dal nuovo Utility Disco introdotto su El Capitan.
      Rimane ovviamente invariato nome della usb in ==>> USB (maiuscolo), la formattazione in Mac esteso Journaled e sia la mappa partizione in GUID
      Da utility disco selezionate la usb, cliccate su inizializza.
      dal menù a tendina scegliete la relative impostazioni
      Immagine  
      Procedura effettua da High Sierra è la stessa della precedente, l'unica attenzione e operazione da aggiungere in primis  è cliccare nel menù a tendina in alto sulla sinistra di utility disco e selezionare "mostra tutti i dispositivi"
      Immagine 
       
      =====================
        METODO 1: "Install_Mac_OS_X.Command" Lo script che trovate allegato in fondo alla guida permette la creazione dell’installer in maniera automatica
      Include la possibilità di scelta di tre versioni di osx
      Yosemite El Capitan Sierra Il risultato finale è come quello del metodo "manuale" descritto nella guida, per cui l'installazione avverrà in un solo passaggio, non in due come con il metodo createinstallmedia. 
      Offre inoltre la possibilità di inserire un kernel patchato, utile, per esempio, per chi usa AMD.
      Rimane invariato il nome dato alla usb in USB, mappa partizione e tipo di formattazione
      Se la vostra usb non sarà rinominata nel modo corretto, verrete avvisati dal terminale, quindi non dovrete far altro che apportare la relativa modifica e rilanciare nuovamente lo script
      Esempio
      ===========================
      Metodo 2 
      L'intento è quello di usare la procedura fornitaci direttamente da Apple, "createinstallmedia", introdotta  con Mavericks. 
      Tale metodo prevede l’uso del terminale che via via se ne sta perdendo il “valore e l’uso”
      Inizialmente per i neofiti potrà sembrare problematico ma alla fine non è così.
      Durante il post installazione alcune operazioni ne richiedono l’ uso.
      Perciò mi sono chiesto perchè, qualora uno volesse, non far conoscere da subito un po’ questo “strumento”???
      Per favorirvi vi ho allegato i comandi già  “pronti”, i quali li potrete copiare ed incollare sul terminale.
      A questo punto aprite il terminale, copiate ed incollate il comando sottostante e premete invio, digitate la vostra password e premete nuovamente invio.
      Comando per creare USB con Yosemite:
      sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction  
      Comando per creare USB con El Capitan
      sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app --nointeraction Comando per creare USB con Sierra 
      sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ Sierra.app/ --nointeraction Per creare USB con Hight Sierra o Mojave usate --> C_I_M (aggiornato per 10.14)
       
      Funziona con il drag & drop sul terminale, in questo caso non vi è necessità che la usb sia nominata in un determinato modo ed essendo basato su create install media ovviamente funziona da 10.9 a 10.14.... 
      BENE…IL PROCESSO DI CREAZIONE E’ INIZIATO…
      AVREMO CIRCA 20/30 MINUTI DI TEMPO LIBERO A CUI DEDICARSI A CIO’ CHE VOGLIAMO………………………………………..  
      COLGO L’OCCASIONE PER FARVI NOTARE LA VELOCITA’ E LA SICUREZZA DI QUESTO METODO
      CONFRONTATE QUESTO CON IL TERZO METODO E NOTERETE CHE CON UN SOLO PASSAGGIO, OSSIA IL COMANDO DATO AL TERMINALE, FACCIAMO IN UNA SINGOLA OPERAZIONE TUTTI I VARI STEP DESCRITTI SULL’ ALTRO METODO.
      DETTO QUESTO, MOLTO IMPORTANTE E’ SOTTOLINEARE CHE COSI’ FACENDO EVITEREMO ERRORI  DI DISTRAZIONE RIGUARDO AI PASSAGGI O FRAINTENDIMENTI.
      Immagine 
      Potete adesso passare ad installare il bootloader Clover sulla vostra usb.
      *NOTA*:
      Avendo usato questo metodo l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      =========================
      METODO "MANUALE"....  (lascio per futura memoria-Compatibile fino a 10.12)
      ==========================
      Bootloader
      **Nota:** Installazione in UEFI  dipenderà dalla scheda madre in vostro possesso, quindi se non supporta tale opzione , il bootloader dovrà essere installato in  modalità Legacy.
       Vi invito, qualora non sapeste questa informazione, a recarvi nel sito ufficiale del produttore e controllare le informazioni a riguardo
      Fatto questo dobbiamo installare  Clover sulla usb.
      A seconda del tipo di Bios o al tipo di installazione che vogliamo fare UEFI o Legacy avremo ovviamente configurazioni diverse in questa fase.
      Lanciate il pkg.
      Immagine 

       
      Cambiate la destinazione di installazione ad USB oppure Install Mac_OS_X (a secondo del tipo di creazione eseguita)
      Successivamente clicchiamo su "Ad Hoc"
      Per Installazione UEFI
      Mettete i flag   : Installazione solo per avvio UEFI
                               : installare Clover nella ESP
                               : Driver64UEFI  AptioMemory --> (consigliato) 
                               : Driver64UEFI  ApfsDriverLoader --> (consigliato) --> sostituisce l'uso del driver apfs.efi
                               : Selezionate l'altri driver come da successiva immagine,
       
      *Nota: Altri driver che si possono usare  al suo posto  sono:
       informazioni 
       
      Proseguite con l’installazione.
      Immagine 
      ** Ricordate che avrete accesso a questa cartella dopo aver montato la partizione EFI**
      ===========================
      Per installazione Legacy
      Immagine 
      ===========================
      Impostazione per config.plist:
      Con clover configurator “montate” la partizione EFI della usb.
      1) Per fare questo nel menù di sinistra, cliccate su “Mount EFI”
      2) individuate la partizione relativa alla vostra usb, a questo punto montiamo la relativa partizione EFI  selezionando l’apposito pulsante “Mount Partition”
      Immagine 
      3) Successivamente cliccate su “Open Partition”.. recatevi in EFI/Clover ed aprite il config.plist
      4) Sezione ACPI: Disabilitate tutti i fix sia del menù 1 che del menù 2
      Immagine 
      5) Sezione BOOT: Sole se si sta installando Yosemite mettete il flag su kext-dev-mode=1
      Immagine 
      6) Sezione RT Variables: Se si sta installando El Capitan oppure Sierra, aggiungere i valori: BooterConfig= 0x28, CsrActiveConfig= 0x67
      Immagine 
      7) Sezione System Parameters: Su inject kext mettete YES
      Immagine 
      ===========================
      Nota: Su El Capitan, è stato introdotto SIP (System Integrity Protection)
      Info:
      ===========================
      Recatevi in EFI/Clover/kext/10.x 
      X= alla versione di osx che state installando. Per esempio se installerete Yosemite dovrete recarvi nella cartella 10.10, con El Capitan in 10.11….ecc
      Se non ci fosse tale cartella, createla e nominatela voi a “modo”.
      Copiatevi all’interno FakeSmc.kext
      *Nota se venite già da altre vostre configurazioni, oltre kext sopra citato ,potete mettere gli altri necessari per il vostro hardware
      Stessa cosa se avete DSDT e/o SSDT potete copiarli in EFI/Clover/Acpi/Patched
      Immagine 
      
      Per High Sierra:
      Scaricare il driver apfs.efi a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
       
      Per chi volesse continuare ad usare HFS vi rimando a questo post:
        Come installare High Sierra in HFS direttamente dalla usb  
      Utenti Laptop:  Nel 99% è obbligatorio disattivare la grafica discreta Nvidia/Amd per installare questo nuovo osx
                                     Quindi aggiungete --> SSDT-Disable_DGPU.aml.zip
                                     in EFI/Clover/acpi/Patched della usb
      --------------------------------------------------------------------
      Per Mojave:
      Scaricare il driver apfs.efi per 10.14 a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
      Versione di clover non antecedente a V_4015
      Volete usare HFS?
      E' possibile fare un installazione diretta su altro disco o partizione, nel caso può essere usato anche per effettuare aggiornamenti...
      nel caso guardate...
       Mojave in HFS 
       Oppure direttamente da usb  
       
      Fatto questo avrete la vostra USB bootable per installare OSX.
      ………Non scordatevi Fakesmc.kext da mettere nella relativa cartella…. senza il quale non farete mai il Boot......
      *NOTA: se usato il terminale per la creazione della usb, l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      **NOTA** Se avete processori Broadwell,Skylake o Kabylake...usate FakeSmc.kext e relativi sensors che trovate all'interno del secondo pacchetto.. (potete usarlo anche sui precedenti senza problemi, essendo una versione più aggiornata ha ulteriore supporto per le cpu più recenti)
      Update: Fakesmc e sensors versione 6.26
      Post installazione... post #2           
       Buon Hack….. 
      Aggiornamento:Install_Mac_OS_X.command.zip (compatibile da 10.10 a 10.12)
      le info le trovate a questo post
      Ringrazio @Ciro82 che mi ha aiutato nel preparare questa guida.
      Pacchetto.zip
      Pacchetto-2.zip
      apfs.efi-10.13-NoLog.zip
      Pacchetto-Fake+Sensors 6.26.1440.zip
      apfs.efi-10.13.1-No_LOG.zip
      apfs.efi-10.13.2_No_Log.zip
      apfs.efi-10.13.3-No_Log.zip
      apfs.efi-10.13.4-No_Log.zip
      apfs.efi-10.13.5_No_Log.zip
      C_I_M.zip
       
      apfs.efi-10.14-beta1_No_Log.zip





       

×