Jump to content
  1. Cameleer

    Cameleer

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By kushwavez
      Acer Aspire V15 V5-591G - macOS Sierra 10.12.6 - Big Sur 11
      Running Big Sur 11.0.1!
      (Sierra, High Sierra and Mojave needs "SATA-100-series-unsupported.kext" and unmodified "AirPortBrcmFixup.kext")
       
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      Motherboard: USOPP_SLS (Skylake-H PCH) BIOS: Insyde Corp. v 1.15 CPU: Intel Core i5-6300HQ 2.3 GHz (Skylake) GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530 RAM: 16 GB DDR4 (2x 8 GB SAMSUNG 2133 MHz) WiFi + Bluetooth: Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth) Audio: Realtek HD Audio: ALC 255  Ethernet: Realtek RTL8168/8111 Card Reader: Realtek USB 2.0 Card Reader (USB2.0-CRW) Webcam: HD Webcam HDD: TOSHIBA 500 GB HDD SSD: KINGSTON A2000 NVMe PCI-e SSD (if you want Windows dual-boot then you need M.2 SATA SSD since NVMe will not work on Windows due interfering with NVIDIA GTX 950M (bluescreen when loading drivers)) Display: 1366x768 (15.6", Matte) Battery: 6 cell 56Wh / 5040mAh Connectors:  1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) Keyboard & Touchpad: Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard. Working:  
      Wi-Fi (with BCM94352Z) Bluetooth hand-off (With BCM94352Z) Full Graphics Acceleration Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color) HDMI & VGA Outputs Audio  Ethernet  App Store, Messages, FaceTime, Siri, iCloud Integrated webcam 3.0 USB Touchpad and Keyboard (with working gestures and Fn+Brightness keys) Battery info Sleep Mode NVMe PCI-e x4 SSD Power Management Hardware decoding/encoding (up to HEVC) Not working:
      Original Wi-Fi (Qualcomm Atheros QCNFA344A):  Only Bluetooth is working, Wifi is unsupported, changed to Broadcom BCM94352Z NVIDIA GeForce GTX 950M: Optimus not supported. Card Reader: Unsupported For Wi-Fi:
      1st method: You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it 2nd and best method: Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareRepo, BrcmPatchRAM3, AirportBrcmFixup kexts they're all in my attached zip). Or buy BCM94360NG for OOB support. You could buy these cards from ebay, aliexpress, or amazon Issues:
      - Sometimes Combo Jack audio is not working after sleep
      Not tested:
      - Hibernation
      - FileVault
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode: UEFI
      Getting ready for Installation:
       Download the install zip (bootpack & postinstall):  Click here (v5126) -> Acer_Aspire_V5-591G_Clover_v5126.zip (Tested: Sierra 10.12.6 -> macOS Big Sur 11.0.1)
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia, gibMacOS - Windows: Transmac, Vmware, Win32diskimager, gibMacOS)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.plist" -> you'll have more informations about the freeze
      - To disable SIP boot with "config_debug.plist"
       
      Please open the README.pdf in my install zip for more informations about the USB Installer & Post installation!
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict> Before updating to a new version of macOS please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
      Here some pictures:

       
      Running fine on Big Sur 11.0.1 
       

      Finally a fully working touchpad.
       
      Sierra 10.12.6
       
      High Sierra 10.13.6
       
      Mojave 10.14.6
       
      Catalina 10.15.7
      macOS & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
            5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      IF YOU CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      It's because your EFI is not 200 MB or not an "Apple" original EFI,  but don't worry, try another EFI mounter, or mount from terminal (I used EFI Mountain Show: Getting errors, but you can mount and use without problem) You also could "mount" the EFI from Windows: 1st method: open cmd in administrator mode and type:
      diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition) Open Explorer++ in administrator mode to manage EFI
      remove letter=b (This will "unmount" your EFI) 2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI) Open Explorer++ in administrator mode to manage EFI
      mountvol b: /d (This will unmount your EFI) Useful Applications for Mac:
      EFI Mountain Show -> To easily mount your EFI Clover Configurator -> To easily manage your config.plist https://mackie100projects.altervista.org/download-clover-configurator/ PlistEditPro -> Advanced plist editor https://www.fatcatsoftware.com/plisteditpro/ iStat Menus -> To monitoring your devices https://bjango.com/mac/istatmenus/ Boom 3D -> To significantly increase your audio quality https://www.globaldelight.com/boom/ TextMate -> a basic code editor just like Notepad++ on Windows https://macromates.com Modified Wineskin to run basic Windows 32-bit or 64-bit (or DX9 games) applications on Catalina -> https://www.reddit.com/r/MacOS/comments/fobx5t/i_didnt_want_to_boot_windows_every_time_when_i/ CrossOver 20 -> Run DirectX 11 applications on Catalina=< https://www.codeweavers.com/crossover/ MaciASL -> View/Edit your .aml, .dsl files https://bitbucket.org/RehabMan/os-x-maciasl-patchmatic/downloads/ Hackintool -> All useful info, tools in one place https://github.com/headkaze/Hackintool IORegistryExplorer V2.1 -> To view your IO tables https://github.com/vulgo/IORegistryExplorer/releases/tag/v2.1 App Cleaner -> To delete your apps with caches https://freemacsoft.net/appcleaner/ Intel Power Gadget -> To see your frequencies https://software.intel.com/en-us/articles/intel-power-gadget Carbon Copy Cloner -> Advanced macOS drive backup utility https://bombich.com Commander One -> A Total Commander alternative for macOS https://mac.eltima.com/file-manager.html  
      Useful Applications for Windows:
      Total Commander -> To easily manage EFI https://www.ghisler.com mountvol b: /s -> To mount your system drive EFI EasyUEFI -> To manage boot orders and any bootloaders with ease https://www.easyuefi.com/index.html MiniTool Partition Wizard -> To mount your USB EFI, and manage other drives https://www.minitool.com/partition-manager/ Notepad++ -> Basic code editor for all type of files https://notepad-plus-plus.org gibMacOS -> A python script for downloading/creating macOS Internet Recovery USB from Windows (working internet is needed when installing) https://github.com/corpnewt/gibMacOS  
       
      Notes:
      For Sierra, High Sierra, Mojave you need to download and use the full AirPortBrcmFixup.kext for WiFi, and replace CtlnaAHCIPort.kext with SATA-100-series-unsupported.kext for AHCI Sata drives For Sierra only you need to replace SMCBatteryManager.kext with ACPIBatteryManager.kext for working Battery indicator  
      Changelog:
      2020.11.12: Touchpad now fully functional with gestures, Patched Fn+Brightness keys (Fn+Left, Fn+Right), repatched DSDT, changed SMBIOS to MacBookPro13,1 for better support, fixed CPU Stepping, fixed some wrong lines in config.plist, updated to Big Sur release, updated bootpack, updated guide. 2020.11.03: Tested macOS Sierra, High Sierra, Mojave, Catalina, Big Sur, updated guide 2020.11.01: Initial upload
    • By kushwavez
      A really good motherboard with macOS compatible bult-in Wifi & Bluetooth

      ASUS Z170-Deluxe (with Wifi)
      BIOS: v3801
      CPU: i7-6700K 4.0 to 4.2 GHz (w/o OC)
      RAM: 1x 16 GB Corsair DDR4 2400 MHz
      GPU: Intel HD 530 (Headless) & ASUS Radeon RX 5700 OC 8 GB
      Audio: ALC 1150
      Ethernet: I219V2, I211-AT
      WiFi & Bluetooth: Broadcom BCM94360HMB Half-Mini-PCI-E
      More Specs: https://www.asus.com/Motherboards/Z170-DELUXE/specifications/
       
      El Capitan 10.11.6 -> Big Sur 11 - Windows 10
       
      What is working:
      BCM94360HMB Wifi and Bluetooth AirDrop, Handoff, FaceTime, Messages, App Store, iCloud, etc. Intel HD 530 (QE/CI tested, but now I'm using it in headless) Sleep RX 5700 (QE/CI with 2 1080p monitors connected) Sound (all ports) USB Ports Two Ethernet ports macOS with a light OC (4.12 GHz - 4.5 Ghz, XMP, ASUS optimal) ASUS HyperKit and M.2 with a KINGSTON NVMe SSD - 250 GB Hardware decoding/encoding on both HD 530 and RX 5700 (HD 530 up to HEVC, RX 5700 at the time of writing VP9) iGPU only (with QuickSync) is used in the default config.plist To use dGPU for hw decode/encode and also use Intel QuickSync you need to start with "config_headless.plist" This will use iMac17,2 SMBIOS and shikigva=80 To use dGPU only boot with "config_amd.plist" also disable iGPU completely in BIOS. This will use iMacPro1,1 SMBIOS without iGPU System Integrity Protection is Enabled by default. If you need to boot with SIP disabled you may use "config_debug.plist" or disable it manually in Clover settings. If you want Enabled SIP but with allowing unsigned kexts you may boot with "CsrActiveConfig = 0x01"  
      What is not working:
      -  
       
      Not tested:
      Thunderbolt (no equipment)  
      Issues:
      None  
      BIOS Settings:
      Boot\CSM (Compatibility Support Module): Launch CSM: Disabled Boot\Secure Boot: OS type: Other OS Secure Boot State: Disabled Advanced\System agent (sa) Configuration: VT-d: Enabled Graphics Configuration: (This is for HD 530 in headless) Primary Display: Auto (to use dGPU only this must be PEG) iGPU Multi-monitor: Enabled (to use dGPU only this must be Disabled) RC6(Render Standby): Enabled (to use dGPU only this must be Disabled) DVMT Pre-Allocated: 128M Advanced\PCH Storage Configuration: SATA Mode Selection: AHCI HyperKit: Enable (if you have NVMe SSD with ASUS HyperKit) Advanced\CPU Configuration: Intel Virtualization Technology: Enabled CPU- Power Management Control: CPU- C-States: Enabled Intel SpeedShift: Enabled  
      Getting ready for installation:
      Download the bootpack (Clover v5126): Click here -> Z170-DELUXE_Clover_v5126.zip (Tested: El Capitan 10.11.6 -> macOS Big Sur 11.0.1)  
      Installation:
      Create an installer with any method you know (- Mac: createinstallmedia, gibMacOS - Windows: Transmac, Vmware, Win32diskimager, gibMacOS) Copy my Clover folder to the USB's EFI folder Boot with the Installer USB If you have any problem (kp or freeze) boot with config_debug.plist to see what causes the issue  
      Post Installation:
      Download Clover Configurator and generate a new Serial Number for yourself  
      Some pictures:

       
       



       
      El Capitan 10.11.6
       
      Sierra 10.12.6
       
      High Sierra 10.13.6
       
      Mojave 10.14.6
       
      Catalina 10.15.7
       
      Catalina & Windows 10 Dual-Boot (clean install, on one drive):
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac)
       Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart
      Boot into your Win installer, Format the partition you created for Win, install. 
      Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: 
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
      You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      Mounting EFI from Windows:
      Open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Total Commander or Explorer++ in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI)  
      Useful Applications for Mac:
      EFI Mountain Show -> To easily mount your EFI Clover Configurator -> To easily manage your config.plist https://mackie100projects.altervista.org/download-clover-configurator/ PlistEditPro -> Advanced plist editor https://www.fatcatsoftware.com/plisteditpro/ iStat Menus -> To monitoring your devices https://bjango.com/mac/istatmenus/ Boom 3D -> To significantly increase your audio quality https://www.globaldelight.com/boom/ TextMate -> a basic code editor just like Notepad++ on Windows https://macromates.com Modified Wineskin to run basic Windows 32-bit or 64-bit (or DX9 games) applications on Catalina -> https://www.reddit.com/r/MacOS/comments/fobx5t/i_didnt_want_to_boot_windows_every_time_when_i/ MaciASL -> View/Edit your .aml, .dsl files https://bitbucket.org/RehabMan/os-x-maciasl-patchmatic/downloads/ Hackintool -> All useful info, tools in one place https://github.com/headkaze/Hackintool IORegistryExplorer V2.1 -> To view your IO tables https://github.com/vulgo/IORegistryExplorer/releases/tag/v2.1 App Cleaner -> To delete your apps with caches https://freemacsoft.net/appcleaner/ Intel Power Gadget -> To see your frequencies https://software.intel.com/en-us/articles/intel-power-gadget Carbon Copy Cloner -> Advanced macOS drive backup utility https://bombich.com Commander One ->A Total Commander alternative for macOS https://mac.eltima.com/file-manager.html  
      Useful Applications for Windows:
      Total Commander -> To easily manage EFI https://www.ghisler.com gibMacOS -> A python script for downloading/creating macOS Internet Recovery USB from Windows (working internet is needed when installing) https://github.com/corpnewt/gibMacOS mountvol b: /s -> To mount your system drive EFI
      EasyUEFI -> To manage boot orders and any bootloaders with ease https://www.easyuefi.com/index.html
      MiniTool Partition Wizard -> To mount your USB EFI, and manage other drives https://www.minitool.com/partition-manager/
      Notepad++ -> Basic code editor for all type of files https://notepad-plus-plus.org
       
      Notes:
      No need to change anything inside Clover from El Capitan to Big Sur For macOS Mojave and older you might need the full AirPortBrcmFixup.kext for full WiFi support   
      Changelog:
      2020.11.12: Noticed that the CPU is always at 4200 Mhz, created an SSDT for proper CPU stepping. Updated to Big Sur release version, updated bootpack
      2020.11.03: Tested El Capitan, Sierra, High Sierra, Mojave, Catalina, Big Sur
      2020.11.01: Updated bootpack to Clover v5126, ready for macOS 11 Big Sur final release
      2020.04.23: Corrected layout-id to use all audio ports, updated bootpack
      2020.04.22: Deleted unnecessary boot-args, can boot without any custom boot-args (except agdpmod=pikera for RX 5700), updated bootpack
      2020.04.20: Deleted unnecessary lines from config.plist, updated bootpack
      2020.04.17: Replaced FakeSMC with VirtualSMC because FakeSMC is outdated (to see your frequencies use Intel Power Gadget) -> Removed unnecessary kexts, Updated all necessary kexts, updated Clover to v5112, updated bootpack, enabled SIP, deleted bootcamp theme
      2020.03.26: Updated to 10.15.4 -> Updated WhateverGreen, Lilu -> Updated Clover to v5107
      2020.03.23: Removed "EmuVariableUefi.efi" -> deleted, caused false nvram map, now it's native, updated Clover to v5106
      2020.02.11: Updated to 10.15.3 -> No problem when/after installing
      2020.01.19: Added ASUS HyperKit NVMe SSD to the "What is working" list
      2020.01.12: Tested system with OC, added more informations to BIOS settings
      2020.01.11: Added SmallTreeIntel82576.kext for 2nd Ethernet, Tested Ethernet ports
      2020.01.11: First upload
       
    • By MaLd0n
      First...
      If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MrPaulfpv
      Hi Im am a complety noob on this of the hackintosh world, and with all im from spain so its difficult.
      I have installed HIgh SIerra woth Aorus Z390 pro wifi, 16GBRam, 8700K, GTX 1060
      I have succesfully follow the guide from Dortania.
      But i`ve figured out i need a patch for mi SSDT-PLUG acpi to work well on mi mobo,. i will link it.
      Then hardware aceleration doest work, ive iltalled nvidia web drivers and lilu and watervergreen are wonking properly, tested witrh comands on Dortania GUide NVRAM works too.
      and for the best part im having freezes that are sooo anoying. Ya i need so much help im asking for a lot but.
      The help will be so much appreciate it.
      good night guys. Have a nice year.
      SSDT-PLUG.aml


    • By Fantome1S
      Finaly Success to boot on Sierra 10.12.6 (16G29) with Touchscreen working theres still things to fix but everything is almost working. During the Corvid StayAtHome Period I was able and have time to make this laptop boot on MacOS after a lot of attemps before going back to job. It was the hardest laptop hackintosh install attemp i've done so far and Sierra OS is the only that works. I tried El Capitan and Mojave and its never boot so I not even tested Catalina. I searched on the web and theres no install guide for this specific laptop or no Success install post on this laptop its look like a not very well supported laptop by hackintosh. Maybe some of you can help me correct the things that still not work. Audio work but with voodo (low sound and low quality) I want to make it work with AppleALC to get better quality sound. Thanks in advance
       
      Things that work:
       
      -Touchscreen
      -Trackpad (not the gesture for now) - Backlight Keyboard
      -EthernetPort and Wireless (with a wifi dongle. I will change to a broadcom wifi mini-pci chip)
      -Brightness Controls with FN key
      -Audio Voodoo ''low sound'' (will tried to change to AppleALC or AppleHDA fix method) 
      -USB 3.0
       
      Things that not work or need to be fixed:
       
      -Weird double long booting screen-first loading bar on the right. after real loading bar is visible ?
      -Audio (Voodoo) work but with low volume sound- still not success to make work AppleALC.kext method
      -SENSORS -CPU-HDD Temperatures, BATTERY LEVEL, ETC…
      - Sleep (Disabled): USB ports not works after wake from sleep
      -Trackpad Gestures
       
      Hardware:
       
      CPU: Intel Core i7-3687U, 2100 MHz
      GPU: Intel HD Graphics 4000
      RAM: 12 GB (4GB soldered + 8 GB Samsung DDR3 1600)
      Motherboard/Laptop model: Intel Panther Point QM77, Intel Ivy Bridge - (HP Revolve 810 G1)
      Audio Codec: IDT 92HD91BXX @ Intel Panther Point PCH - High Definition Audio Controller
      Ethernet Card: Intel(R) 82579LM Gigabit Network Connection
      Wifi/BT Card: Intel(R) Centrino(R) Advanced-N 6235
      HP hs2350 HSPA+ MobileBroadband Network Adapter
×