Recently Browsing 0 members
No registered users viewing this page.
Budget Workstation MacOS 10.14.1 build: z370 AORUS Gaming 5 - i5-8600K - RX 580 - UHD 630
flawless iGPU/dGPU integration, fast FCPX editing/rendering, great overall performance for ~$1200 / ~£1000
Update: updated WhateverGreen and Lilu, then updated OS to 10.14.3 and everything is fine! Even iMessage, which previously I hadn't been able to make work, is now working - possibly the update flushed the NVRAM?
I'm gonna come straight out and admit it - I used newb tools which are considered taboo on InsanelyMac, and so this isn't so much an installation guide as it is a green flag to anyone considering the same hardware. My first and previous Hackintosh project was just over ten years ago and this site was massively helpful, so this is my (very small) way of giving back.
CPU: Intel i5-8600K 3.6GHz hexacore (contains UHD 630 iGPU)
CPU Cooler: be quiet! Pure Rock Slim (no paste needed, and fan facing front)
Mobo: GIGABYTE z370 AORUS Gaming 5 (WIFI)
RAM: 1x 8GB CORSAIR Vengeance LPX C16 2666MHz (in first slot)
GFX Card: Sapphire RX 580 NITRO+ SE
SATA: used ports 0, 1, 3, 5 (HDD problems when connected to port 4)
DVD Drive: generic
PSU: EVGA 500W Semi Modular (but you should get 650W!)
Case: CoolerMaster CM590 III
Fans: 2x stock case fans (one sucky on front, one blowy on back), 3x be quiet! BL046 120mm fans (two blowy on top, one sucky on front). Airflow near-perfectly balanced.
With the Clover configuration, you want to pay close attention to all things relating to graphics. There are some specific settings for ACPI, Boot, Devices and Graphics which should be copied exactly in order to get the iGPU and dGPU to work in perfect harmony. For instance, make sure you use ig-platform-id 59120003 rather than 59120000 if you want FCPX to be usable. With the right settings, FCPX will not only run, but run flawlessly.
I was not able to figure out how to make NVRAM/PRAM behave itself, and I got errors when I tried to issue relevant commands. As a result, I could not at first get iMessage to work properly. It worked once on my first installation attempt but not from subsequent attempts. This Clover configuration therefore has no consideration whatsoever toward iMessage reliability - however, iMessage ended up working somehow, anyway - I noticed it after I'd updated to 10.14.3 but this may just have been coincidence.
Onboard WiFi does not work. There is no driver for it. I'm using wired ethernet to a bridge router as it was cheaper than getting a compatible PCI card.
Audio is working well after I installed the z370 audio patch, then the ALC1220 codecs, then AppleALC.
With kexts for generic 3rd party SATA and generic 3rd party eSATA, my HDDs and DVD drive work perfectly well.
Sleep/Wake functions run perfectly. iCloud functions run perfectly. Shutdown leaves the mobo LEDs on, annoyingly.
My USB 3 ports seem to suffer from low power output, and I don't know why.
Overall, this system appears to run about as well under MacOS 10.14 Mojave as it does under Windows 7. I would solidly recommend this build to anyone looking to build a computer for workstation purposes, on a budget.
Good morning, everyone, I'm sorry if I was wrong in choosing the topic but I need help.
I have found it extremely difficult to mount a Hackintosh in my acer.
I5 2430m 2.4 6GB RAM
Mobo P5we0 - Intel intel Graphics 3000
At the moment I have not found out what my audio codecs are.
but I'll leave the link on the motherboard.
however, my real problem is several.
I have already used the itakos image, I have already used several images that could be installed normally and that after installing the image I do not have internet via cable or wireless.
And another, I already looked in other forums and I know that I will be called a donkey in the logical question but I have not been able to install the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] or clover to start from the Hard Disk, so I do not know what to do.At the moment I still do not know if there has already been someone who has already installed the High Sierra or just the Sierra in this notebook model and obtained permanent success.
If anyone can help me, I'll be grateful.
Installations without success, but with the system already installed in ACER;
All with the same symptom. Starting only by the bootable USB stick and without internet connection via cable and wireless.
Appreciate ! Acer 5750 Official Page
Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.
Nvidia Web Driver - 378.05.05.25f13 --> build 16G1815 (thanks to flowrider) New!
Nvidia Web Driver - 378.05.05.25f12 --> build 16G1710 (thanks to BreBo)
Nvidia Web Driver - 378.05.05.25f11 --> build 16G1618 (thanks to Frank Nitty)
Nvidia Web Driver - 378.05.05.25f10 --> build 16G1510 (thanks to BreBo)
Nvidia Web Driver - 378.05.05.25f09 --> build 16G1408 (thanks to BreBo)
Nvidia Web Driver - 378.05.05.25f08 --> build 16G1314 (thanks to BreBo)
Nvidia Web Driver - 378.05.05.25f07 --> build 16G1314 (thanks to haring)
Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)
Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)
Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)
Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)
Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)
Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)
Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr) Pascal support!!!
Nvidia Web Driver - 3126.96.36.199f01 --> build 16E195 (thanks to Lanc)
Nvidia Web Driver - 3188.8.131.52f01 --> build 16D32 (thanks to shatterhenner)
Nvidia Web Driver - 3184.108.40.206f02 --> build 16C68 (see this post)
Nvidia Web Driver - 3220.127.116.11f01 --> build 16C67 (see this post)
Nvidia Web Driver - 318.104.22.168b06 --> build 16C60b/16C63a (see this post)
Nvidia Web Driver - 322.214.171.124f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).
Nvidia Web Driver - 3126.96.36.199f01 --> build 16B2555 (thanks to Moviemakergr)
Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)
Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)
Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)
Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)
Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)
Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)
Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)
Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)
Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)
Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)
Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun)
Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)
Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)
Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771 Install MacOS with Olarila Image, Step by Step, Install and Post Install
First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=222609 Installation --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/ --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/ --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/ --Replace with my Clover folder CLOVER.zip --Install Sierra/High Sierra and boot into system! Post Installation --Install Clover in HDD/SSD and replace with my folder CLOVER.zip --Reboot and activate video! -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/ --DSDT My DSDT with Skylake patches DSDT.MaLd0n GA H110M-S2.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI --FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/ -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders! Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others! We're all here to have fun and learn from each other! ENJOY!