Jump to content
pepto

[GUIDE] Run macOS Sierra on a Dell Latitude E6320

122 posts in this topic

Recommended Posts

Run macOS Sierra on a Dell Latitude E6320

 

NO ONE IN THIS FORUM (INCLUDING ME) IS RESPONSIBLE FOR ANY LOSS (DATA, MATERIAL, EQUIPMENT…) OCCURRED TO YOU, YOU ARE THE ONLY ONE RESPONSIBLE, AND BY FOLLOWING THESE INSTRUCTIONS YOU AGREE TO TAKE ALL THE RISKS AND RESPONSIBILITIES. THIS INSTALLATION ISN'T WITHOUT RISKS SO TAKE ALL THE PRECAUTIONS BEFORE DOING ANY FOOLISH ACTION, BACKUP YOUR DATA!

This tutorial will describe the steps to install macOS Sierra on a Dell Latitude E6320 i5 2520M.
If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial.

A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial

I am from The Netherlands so sorry for my bad English.

mac.jpg
1. Credits/Sources
Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide:

  • OSX Latitude.com
  • Tech Erra
  • OSX86 Wiki
  • InsanelyMac
  • Forum member Jake Lo from OSXLatitude.com for helping me out with installing.
  • Morpheousman and Polyzargon from InsanelyMac who helping me with my other topics. (Dell 780)
  • MacPeet, Chris1111 and all other forum members who helping out the community.

A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial. And Hervé from insanelymac for using is modified DSDT.aml for E6320

2. Requirements
Here are the requirements:

  • A Dell Latitude E6320 – This is necessary to install macOS Sierra for this tutorial
  • A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OSX El Capitan, Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended.
  • A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger).
  • A copy of macOS Sierra – The method used by this guide requires that you have a copy of the macOS Sierra Installation app, wich is available for free from the Mac App Store.
  • 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while.
  • An SSD or HDD to install 10.12 to – For me, I used a 500GB HDD to install 10.12 to.
  • An Wireless N Nano USB Adaptor – For use with wifi Highly recommended. I use a TP-LINK TL-WN725N adaptor.
  • E6320_V2.zipThis ZIP file contains everything that you need to get your flash drive properly prepared.

3. My Specs
My installation was successfully done on an Dell Latitude E6320 i5-2520M laptop computer with the following specs.

  • Intel Core i5-2520M @ 2.5GHz, 3MB cache, Dual Core
  • 4GB DDR3 1333Mhz RAM
  • Western Digital 250GB HDD
  • INTEL HD3000 Video
  • Intel 825xx onboard network
  • Dell wireless 375 Bluetooth 3.0 onboard (works OOB)
  • IDT 92HDxxx HD audio onboard
  • TL-WN725N Wireless N Nano USB Adaptor
  • Apple Magic Trackpad (only @home)
  • Apple Wireless Keyboard US (only @home)
  • Apple Magic Mouse

4. Download OS X Sierra

  • Download macOS Sierra from the Mac App Store.
  • Once macOS Sierra is downloaded, close the install pop-up that appears using Command (⌘)+Q.
  • The application INSTALL macOS Sierra will appear in /Applications
  • Done!

5. Prepare bootable USB Installer
Note on flash drives: You will need a USB flash drive to make this work. Your USB should be at least 8GB and a USB 3.0 drive is preferred. Kingston sells an 8GB USB 3.0 drive for less than 10 euro.
Now, we need to prepare the USB Drive so that it will properly bootup on your PC. Make sure that the disk you choose to use doesn't contain anything that you want to keep, because the following tutorial will purge everything on the drive.

  • Open Finder - Applications and right-click on Install macOS Sierra and select Show Package Contents.
  • Open Contents - Resources.
  • Open a Terminal window thru Applications - Utilities - Terminal.
  • In the Terminal window type sudo followed by a space.
  • Drag the createinstallmedia file from the finder window opened in Step 4 to the Terminal Window.
  • Type --volume followed by a space.
  • Connect your USB drive and drag the USB drive into the Terminal Window.
  • Type --applicationpath in the Terminal followed by a space.
  • Open Finder - Applications and drag the Install macOS Sierra into the Terminal Window.
  • Press Return on the keyboard to submit the full command.
  • Type a 'Y' to continue when prompted to do so, and press Return on your keyboard
  • The install process will begin by erasing the contents of your USB disk and copying the installer files to the USB disk. The entire process is quite lengthy; it can takes around 15-30 minutes, so you will need to show some patience

6. Installing Clover to the USB Disk

  • Unpack the E6320.zip to your desktop or specified map you preferred.
  • Open the map E6320 - Clover_v2.3k_r3726.
  • DubbleClick on the Clover_v2.3k_r3726.pkg package file.
  • Clover installation screen will be prompt.
  • Click on Continue - Continue.
  • Click on Change Install Location on the right bottom.
  • Choose your USB Stick named Install macOS Sierra Public Beta click on Continue.
  • Click on Customize on the left bottom.
  • Choose Install Clover in the ESP
  • Choose Bootloader : Install boot0af in MBR
  • Choose in Clover EFI for CloverEFI 64- Bits SATA
  • At last choose Install RC Scripts on target volume
  • Click after that on Install.
  • Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder.

7. Prepare USB stick for the Dell E6320
Now, we need to prepare the USB Drive so that it will properly bootup on your Laptop.

  • Go to map where you have unpacked the E6320 zip file there you will find a map called EFI.
  • Copy the map EFI and go to your EFI partition thru Finder.
  • Paste the EFI folder in the EFI partition and replace everything.
  • Done your USB Stick is ready to boot macOS Sierra installer.

8. Bios Settings Dell Latitude E6320
Before we boot from the Dell Latitude we need to optimize the bios for OSX Sierra

  • Start your Dell Latitude and press F2 to get into the Bios.
  • In the main screen click on "Load Defaults", the bios will be reset to default settings.
  • Go to General - Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting.
  • Go then to System Configuration - SATA Operation and choose on the right for AHCI click again on apply and choose exit, now the Bios is ready for installing OSX Sierra.

9. Installing OSX Sierra from your USB drive
Time for the fun stuff! We’ll now boot from your USB drive and install macOS Sierra onto the Hard Drive.
Using a USB 4G flash drive will help things out quite a bit.

  • Power on unit while tapping F12 Key to choose boot device, select USB device.
  • When Clover boot screen is visible, choose boot "Install macOS from Sierra USB Installer".
  • Choose you desired language and click on the arrow, the macOS Utilities screen will appear.
  • For a new installation of macOS, you must erase and format the destination drive according to the following steps before continuing.

If you are upgrading from Mavericks , Yosemite or El Capitan and you want to keep your files and apps, skip steps 1-9. (NOT TESTED IN SIERRA)

  • Choose in the macOS utilities for Disk Utility and click Continue.
  • Disk Utility will be opened, highlight your target drive for macOS Sierra installation in the left column.
  • Click ERASE button on top.
  • Under Name: Type Sierra or any other name.
  • Under Format: Choose Mac OS Extended (Journaled).
  • Under Scheme: Choose GUID Partition Map.
  • Click Erase.
  • Click on Done.
  • Close Disk Utility you will be prompted to the macOS Utilities screen.
  • In the macOS Utilities screen choose Install macOS and click 2x on Continue.
  • Agree the license agreement and click again on Agree
  • When the installer asks you where to install macOS, choose your Sierra HDD click on Install.
  • Sierra will be installed on the HDD, this will take about 6 - 15 minutes depending of your HDD.
  • Upon completion, system will restart a 1st time.
  • Press F12 key to choose the boot device.
  • When the Clover Boot screen is visible, Choose "Boot macOS Install from Sierra".
  • macOS will continue to Install the OS on your HDD this will take about 10 -25 minutes after that the installation will be finished and your laptop will reboot.

10. Booting for the first time macOS Sierra

  • When the Clover Boot screen is visible, Choose "Boot MAC OS X from Sierra"
  • You will eventually get to the setup screens for macOS Sierra. Go through the setup process to setup macOS Sierra.
  • At the country selection choose your country and press continue.
  • Select Your Keyboard choose ABC and press Continue.
  • Choose at "How do i connect to the internet " ..."My Computer Does Not Connect to the Internet", we will fix this later, go further with the setup process and press continue.
  • Choose at Transform Information To This Mac for "Don't Transfer any information now" click on Continue.
  • At Enable Location Services for "Enable Location Services on this Mac" click Continue.
  • Agree the Terms and Conditions.
  • Create your Computer Account and uncheck "Set time zone based on current location" press Continue.
  • Choose your Timezone and click Continue.
  • At the Diagnostic screen click Continue.
  • The setup process is ready, Done!.

11. Setting up your keyboard

  • When the setup is finished the Keyboard Setup Assistent will appear.
  • Press Continue to Identify Your Keyboard.
  • You will ask to press some keys.
  • After pressing some keys you will get the message Your Keyboard Cannot Be Identified, press OK.
  • Choose at Select the Keyboard Type for ANSI (United States and others)
  • Press Done your Keyboard is setup

12. Adjust some settings in macOS 10.12

  • Once in 10.12 go to Finder – Preferences – General and choose in show these items on the desktop for
  • Hard Disk
  • External Disk
  • Go to tab Sidebar and choose your desired Favorites, Shared and Devices.
  • Close the Finder Preferences.

13. Change Security & Privacy for 3rd party software

  • Start Terminal choose GO - Utilities - Terminal.
  • In Terminal type sudo spctl --assess --master-disable followed by password to activate the option in Security & Policy "Allow apps downloaded from" Anywhere.
  • Go to System Preferences – Security& Privacy and look of the option "Anywhere" is active if not activate the option.
  • Close system preferences.

14. Revert HDD for proper boot.

  • Launch Terminal and execute the following command:
  • sudo diskutil corestorage revert /
  • When prompt type your password.
  • Exit Terminal and reboot again with your USB to macOS.

15. Installing Clover to the HD
The steps 15 and 16 are the same as steps 6 and 7 but now we will install clover to the HDD of the E6320.

  • Unpack the E6320.zip to your desktop or specified map you preferred.
  • Open the map E6320 - Clover_v2.3k_r3726.
  • DubbleClick on the Clover_v2.3k_r3726.pkg package file.
  • Clover installation screen will be prompt.
  • Click on Continue - Continue.
  • Click on Change Install Location on the right bottom.
  • Choose your HDD named Sierra click on Continue.
  • Click on Customize on the left bottom.
  • Choose Install Clover in the ESP
  • Choose Bootloader : Install boot0af in MBR
  • Choose in Clover EFI for CloverEFI 64- Bits SATA
  • At last choose Install RC Scripts on target volume
  • Click after that on Install, Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder.

16. Prepare HDD for booting the Dell E6320
Now, we need to prepare the HDD Drive so that it will properly bootup on your PC.
Go to map where you have unpacked the E6320 zip file there you will find a map called EFI.

  • Copy the map EFI and go to your EFI partition thru Finder.
  • Paste the EFI folder in the EFI partition and replace everything.
  • Done your E6320 is ready to boot macOS Sierra.

17. Install Wlan driver for the TL-WN725N
The wireless lan on the Dell E6320 doesn’t work, therefore I use a Wireless N USB Nano Adaptor from TP-LINK. The software is straight forward and installs without problems.

  • Go to your E6320 folder which you have extracted to your HDD of your macOS Sierra.
  • Open the map "beta driver for mac os X 10.11" .
  • Run Installer_RTL.pkg
  • Click Continue - Continue - Continue - Agree - Install
  • Enter your Password and click Install Software - Continue Installation
  • Click Restart to Reboot your Laptop.
  • The first time you will get a kernel panic don't worry reboot again and the laptop will start macOS Sierra.
  • Done!

18. What's working?
Just about everything.

19. Finished!
You’ve successfully installed macOS Sierra onto your Dell Latitude E6320.

TROUBLESHOOTING

20. iMessage & FaceTime Fix
You will need MLB and Rom numbers from a legit Mac device that is on the mac server.
Run iMessage debug on a iMac, Macbook, etc and make a copy and paste of the Terminal output.

  • Open Clover Configurator.
  • Mount EFI Partition.
  • Import config.plist from EFI/EFI/Clover (File , import configuration, browse to config.plist and select).
  • In Clover Configurator Click on RT Variables, Enter Rom and MLB Values from iMessage output from valid iMac device.
  • Save changes to config.plist.
  • Reboot, Sign into iMessage.

iMessage and FaceTime should now both be working.

21. BOOT 0 Error
If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following.

  • Reboot system back into Sierra installer (USB)FLASH DRIVE).
  • Run Disk Utility find the Disk Identifier (eg. disk0s2).
  • Unmount the drive you installed Sierra on.
  • Launch Terminal and execute the following command:
  • dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2.
  • Exit Terminal.
  • Boot Normally.

Run macOS Sierra 10.12 E6320.pdf

Share this post


Link to post
Share on other sites
Advertisement

Hi Pepto,

 

just want to thank you, thank you and really thank you for sharing all your knowledges. No time for testing now but this topic is in my favorites.

 

:thumbsup_anim:  Luuv

 

Share this post


Link to post
Share on other sites

Excellent. Thanks my laptop its running macOS Sierra ... but the keyboard has a few bugs with caps....you know how to solve it ? ....thanks again :D

Share this post


Link to post
Share on other sites

Excellent. Thanks my laptop its running macOS Sierra ... but the keyboard has a few bugs with caps....you know how to solve it ? ....thanks again :D

I have no problems with the keyboard  :surprised:

Share this post


Link to post
Share on other sites

My 2cents contribution to this thread...
 
Regarding hardware specifications, please note the following:

  • LAN card is Intel 82579LM Gigabit Ethernet (PCI ven id 0x8086, dev id 0x1502)
  • Audio card is IDT 92HD90 (Codec 76E7) High Def audio (PCI ven id 0x8086, dev id 0x1c20)
  • Card reader is O2 Micro SD card reader (PCI ven id 0x1217, dev id 0x8231)

You do not need to use VodooSDHC kext for the card reader, the following DSDT patch supports the device OOB and avoids Sleep/Wake issues caused by VoodooSDHC. Under the RP0x device used for the SD card reader, rename device PXSX to SDXC and add the following _DSM method:

                Device (SDXC)          // renamed from PXSX
                {
                    Name (_ADR, Zero)
                    Method (_DSM, 4, NotSerialized)          // injected DSM method
                    {
                        Store (Package (0x08)
                        {
                            "AAPL,slot-name", 
                            "Built-in", 
                            "device_type", 
                            Buffer (0x11)
                            {
                                "Media controller"
                            }, 
                            "model", 
                            Buffer (0x18)
                            {
                                "O2 Micro SD card reader"
                            }, 
                            "compatible", 
                            Buffer (0x0D)
                            {
                                "pci14e4,16bc"          // Apple's own device as declared in AppleSDXC kext
                            }
                        }, Local0)
                        DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                        Return (Local0)
                    }
                    ...

NB: on my E6220, the card reader is located under device RP06. You'll have to check this in IOReg to locate it on the E6320 as it may differ.
 
Regarding the Clover on-the-fly patches:
1) IOGraphicsFamily:
I'm pretty sure all you need to fix the boot display glitch is:

Find 0100007525
Replace by 010000EB25

That's all I'm using and it's working fine.
 
2) AppleIntelSNBGraphicsFB:
The vanilla SNB framebuffer kext contains the following display port definitions:

01 02 04 00 10 07 00 00 10 07 00 00 // Nb of connectors -> "04"
05 03 00 00 02 00 00 00 30 00 00 00 // built-in laptop display
02 05 00 00 00 04 00 00 07 00 00 00 // display port
03 04 00 00 00 04 00 00 09 00 00 00 // display port
04 06 00 00 00 04 00 00 09 00 00 00 // display port

`
 The following mods will give you HDMI video/audio + VGA + DVI (off docking station)

Find 02 05 00 00 00 04 00 00 07 00 00 00
Replace by 02 05 00 00 00 08 00 00 05 00 00 00   // patched: HDMI, display port #5 (built-in port)

Find 03 04 00 00 00 04 00 00 09 00 00 00
Replace by 06 02 00 00 00 04 00 00 08 00 00 00   // patched: VGA, display port #8 (built-in + docking-station port)

Find 04 06 00 00 00 04 00 00 09 00 00 00
Replace by 04 06 00 00 00 04 00 00 07 00 00 00   // vanilla: DVI, display port #7 (docking-station port)

`

If DP output is desired (port #6), either of the following 2 mods can be used instead of one of the above lines (display definitions limited to 4 ports):

02 05 00 00 00 08 00 00 06 00 00 00

or

04 06 00 00 00 04 00 00 06 00 00 00

NB: With this DP mod, external audio only goes through DP (not HDMI) and VGA dies.

Share this post


Link to post
Share on other sites

Hit Cap Lock twice to enable and twice to disable.

 

Excellent. Thanks my laptop its running macOS Sierra ... but the keyboard has a few bugs with caps....you know how to solve it ? ....thanks again :D

Share this post


Link to post
Share on other sites

My 2cents contribution to this thread...

 

Regarding hardware specifications, please note the following:

  • LAN card is Intel 82579LM Gigabit Ethernet (PCI ven id 0x8086, dev id 0x1502)
  • Audio card is IDT 92HD90 (Codec 76E7) High Def audio (PCI ven id 0x8086, dev id 0x1c20)
  • Card reader is O2 Micro SD card reader (PCI ven id 0x1217, dev id 0x8231)
You do not need to use VodooSDHC kext for the card reader, the following DSDT patch supports the device OOB and avoids Sleep/Wake issues caused by VoodooSDHC. Under the RP0x device used for the SD card reader, rename device PXSX to SDXC and add the following _DSM method:


                Device (SDXC)          // renamed from PXSX
                {
                    Name (_ADR, Zero)
                    Method (_DSM, 4, NotSerialized)          // injected DSM method
                    {
                        Store (Package (0x08)
                        {
                            "AAPL,slot-name", 
                            "Built-in", 
                            "device_type", 
                            Buffer (0x11)
                            {
                                "Media controller"
                            }, 
                            "model", 
                            Buffer (0x18)
                            {
                                "O2 Micro SD card reader"
                            }, 
                            "compatible", 
                            Buffer (0x0D)
                            {
                                "pci14e4,16bc"          // Apple's own device as declared in AppleSDXC kext
                            }
                        }, Local0)
                        DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                        Return (Local0)
                    }
                    ...
NB: on my E6220, the card reader is located under device RP06. You'll have to check this in IOReg to locate it on the E6320 as it may differ.

 

Regarding the Clover on-the-fly patches:

1) IOGraphicsFamily:

I'm pretty sure all you need to fix the boot display glitch is:


Find 0100007525
Replace by 010000EB25
That's all I'm using and it's working fine.

 

2) AppleIntelSNBFraphicsFB:

The vanilla SNB framebuffer kext contains the following display port definitions:


01 02 04 00 10 07 00 00 10 07 00 00 // Nb of connectors -> "04"
05 03 00 00 02 00 00 00 30 00 00 00 // built-in laptop display
02 05 00 00 00 04 00 00 07 00 00 00 // display port
03 04 00 00 00 04 00 00 09 00 00 00 // display port
04 06 00 00 00 04 00 00 09 00 00 00 // display port
`

 The following mods will give you HDMI video/audio + VGA + DVI (off docking station)


Find 02 05 00 00 00 04 00 00 07 00 00 00
Replace by 02 05 00 00 00 08 00 00 05 00 00 00   // patched: HDMI, display port #5 (built-in port)

Find 03 04 00 00 00 04 00 00 09 00 00 00
Replace by 06 02 00 00 00 04 00 00 08 00 00 00   // patched: VGA, display port #8 (built-in + docking-station port)

Find 04 06 00 00 00 04 00 00 09 00 00 00
Replace by 04 06 00 00 00 04 00 00 07 00 00 00   // vanilla: DVI, display port #7 (docking-station port)
`

 

If DP output is desired (port #6), either of the following 2 mods can be used instead of one of the above lines (display definitions limited to 4 ports):


02 05 00 00 00 08 00 00 06 00 00 00
or


04 06 00 00 00 04 00 00 06 00 00 00
NB: With this DP mod, external audio only goes through DP (not HDMI) and VGA dies.

 

Herve can you post de DSDT for the SD fix.

Share this post


Link to post
Share on other sites

I can't, I don't have a E6320. Just patch your DSDT as I explained: identify the RP0x/PXSX device in IOReg and simply patch your DSDT according to the code I posted. You can't really go wrong...

Share this post


Link to post
Share on other sites

I tried the way you said,

In step 9, I just faced some errors(2 threads but only found 1), after searching I found this topic:

 

http://www.insanelymac.com/forum/topic/205531-kernel-panic-should-have-2-threads-but-only-found-3/

 

and I renamed the DSDT.aml to DSDT2.aml and the problem solved, but now after I wait for progress bar to fully load, it shows me prohibition sign instead of apple's logo and it does not pass.

Can u help me solve the problem?

Share this post


Link to post
Share on other sites

@Herve I have tried to patch the DSDT but I get a unexpected $end, can you help me out with this about patching DSDT I am a Noob  :P . I have included the DSDT which I use.

 

Oke I have done some searching I have found the PXSX in IOReg but I see 2 RP, RP02 and RP06 the only difference is the awake entry ACPI-WAKE-TYPE 0X2 See attached screenshot of ioreg

 

Also have attached the DSDT editor screen, I have tried different things but every time I get a unexpected $end

 

DSDT.aml.zip

post-286091-0-78482000-1474962484_thumb.png

post-286091-0-63768300-1474962551_thumb.png

Share this post


Link to post
Share on other sites

 Latest news from me i have used a 6220 DSDT and everything is working well ^_^ I know that is not the right method but its works for now.

Share this post


Link to post
Share on other sites

 Latest news from me i have used a 6220 DSDT and everything is working well ^_^ I know that is not the right method but its works for now.

You can post the DSDT file please :D ... 

Share this post


Link to post
Share on other sites

@Pepto, you've gone through all the trouble of posting screenshots of your IOReg but for the wrong device! Can you please confirm that your SD card reader is indeed under RP06. Reboot with your E6320 DSDT then check the PCI ids listed under RP06->PXSX device. Expect vendor 1217 and device 8321.

 

If, as expected, it's indeed RP06->PXSX, use the attached revised DSDT. It's got:

* DTGP method added

* RP06.PXSX renamed to RP06.SDXC (i.e. same device name as Apple's)

* required DSM method injected into RP06.SDXC

 

Revised_E6320_DSDT.aml.zip

Share this post


Link to post
Share on other sites

@Pepto, you've gone through all the trouble of posting screenshots of your IOReg but for the wrong device! Can you please confirm that your SD card reader is indeed under RP06. Reboot with your E6320 DSDT then check the PCI ids listed under RP06->PXSX device. Expect vendor 1217 and device 8321.

 

If, as expected it's indeed RP06->PXSX, use the attached revised DSDT. It's got:

* DTGP method added

* RP06.PXSX renamed to RP06.SDXC (i.e. same device name as Apple's)

* required DSM method injected into RP06.SDXC

 

attachicon.gifRevised_E6320_DSDT.aml.zip

I will give it a try

Share this post


Link to post
Share on other sites

Well...I replace all EFI folder in new zip version but the sound fails :( .... using the new DSDT posted by Herve its fine and the config.plist mod with via ports works fine too.

Share this post


Link to post
Share on other sites
Hello, I got the TP link usb wifi and installed the latest driver. However, it's telling me that I'm connected but there's no internet. Is there a hack or a kext that can help with that?

thanks

Share this post


Link to post
Share on other sites

Hello, I got the TP link usb wifi and installed the latest driver. However, it's telling me that I'm connected but there's no internet. Is there a hack or a kext that can help with that?

thanks

It must works if you have the TL-WN725N Wireless N Nano USB Adaptor. No need to hack the kext.

Share this post


Link to post
Share on other sites
Hervé, on 27 Sept 2016 - 7:15 PM, said:

@Pepto, you've gone through all the trouble of posting screenshots of your IOReg but for the wrong device! Can you please confirm that your SD card reader is indeed under RP06. Reboot with your E6320 DSDT then check the PCI ids listed under RP06->PXSX device. Expect vendor 1217 and device 8321.

 

If, as expected, it's indeed RP06->PXSX, use the attached revised DSDT. It's got:

* DTGP method added

* RP06.PXSX renamed to RP06.SDXC (i.e. same device name as Apple's)

* required DSM method injected into RP06.SDXC

 

attachicon.gifRevised_E6320_DSDT.aml.zip

Hervé i have now used your DSDT i works ok and i have it included in the new zip file for installation. Thanks for that. :thumbsup_anim:

Share this post


Link to post
Share on other sites

Thanks to all.... here is my config.plist with Herve´s mod for graphics glitch in boot and display ports working... 

 

Edit:

Can't attach files so... here is the config.plist content  :D

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>DropOEM_DSM</key>
			<false/>
			<key>Name</key>
			<string>DSDT.aml</string>
			<key>ReuseFFFF</key>
			<false/>
		</dict>
		<key>DropTables</key>
		<array>
			<dict>
				<key>Signature</key>
				<string>DMAR</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>Cpu0Ist</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>CpuPm</string>
			</dict>
		</array>
		<key>SSDT</key>
		<dict>
			<key>DropOem</key>
			<false/>
			<key>Generate</key>
			<false/>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>slide=0 kext-dev-mode=1</string>
		<key>Debug</key>
		<false/>
		<key>DefaultVolume</key>
		<string>LastBootedVolume</string>
		<key>Legacy</key>
		<string>PBR</string>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>1</integer>
		<key>XMPDetection</key>
		<false/>
	</dict>
	<key>CPU</key>
	<dict>
		<key>UseARTFrequency</key>
		<false/>
	</dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>3</string>
		</dict>
		<key>USB</key>
		<dict>
			<key>AddClockID</key>
			<true/>
			<key>FixOwnership</key>
			<true/>
			<key>Inject</key>
			<true/>
		</dict>
	</dict>
	<key>DisableDrivers</key>
	<array>
		<string>VBoxHfs</string>
	</array>
	<key>GUI</key>
	<dict>
		<key>Custom</key>
		<dict>
			<key>Entries</key>
			<array>
				<dict>
					<key>Disabled</key>
					<true/>
					<key>FullTitle</key>
					<string>UEFI Internal</string>
					<key>Hidden</key>
					<true/>
					<key>Ignore</key>
					<false/>
					<key>InjectKexts</key>
					<false/>
					<key>NoCaches</key>
					<false/>
					<key>Type</key>
					<string>Other</string>
				</dict>
			</array>
		</dict>
		<key>Mouse</key>
		<dict>
			<key>DoubleClick</key>
			<integer>500</integer>
			<key>Enabled</key>
			<false/>
			<key>Mirror</key>
			<false/>
			<key>Speed</key>
			<integer>8</integer>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Legacy</key>
			<true/>
			<key>Linux</key>
			<false/>
			<key>Tool</key>
			<true/>
		</dict>
		<key>Theme</key>
		<string>mac</string>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>DualLink</key>
		<integer>0</integer>
		<key>Inject</key>
		<dict>
			<key>ATI</key>
			<false/>
			<key>Intel</key>
			<true/>
			<key>NVidia</key>
			<false/>
		</dict>
		<key>NvidiaSingle</key>
		<false/>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>AsusAICPUPM</key>
		<true/>
		<key>Debug</key>
		<false/>
		<key>KernelCpu</key>
		<false/>
		<key>KernelHaswellE</key>
		<false/>
		<key>KernelLapic</key>
		<false/>
		<key>KernelPm</key>
		<false/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>Second Stage Boot2</string>
				<key>Find</key>
				<data>
				QYjE6wM=
				</data>
				<key>Name</key>
				<string>IOGraphicsFamily</string>
				<key>Replace</key>
				<data>
				QYjE6yM=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>Second Stage Boot2</string>
				<key>Find</key>
				<data>
				AQAAdSU=
				</data>
				<key>Name</key>
				<string>IOGraphicsFamily</string>
				<key>Replace</key>
				<data>
				AQAA6yU=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>Second Stage Boot1</string>
				<key>Find</key>
				<data>
				hcB0XUg=
				</data>
				<key>Name</key>
				<string>IOGraphicsFamily</string>
				<key>Replace</key>
				<data>
				McB0W0g=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>Expect 2 matches</string>
				<key>Find</key>
				<data>
				ixnUEQ==
				</data>
				<key>Name</key>
				<string>AppleHDA</string>
				<key>Replace</key>
				<data>
				53YdEQ==
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.10-SNB-Port _0x6-DP2HDMI</string>
				<key>Find</key>
				<data>
				AwQAAAAEAAAJAAAA
				</data>
				<key>Name</key>
				<string>AppleIntelSNBGraphicsFB</string>
				<key>Replace</key>
				<data>
				BgIAAAAEAAAIAAAA
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.10-SNB-Port _0x5-DP2HDMI</string>
				<key>Find</key>
				<data>
				AgUAAAAEAAAHAAAA
				</data>
				<key>Name</key>
				<string>AppleIntelSNBGraphicsFB</string>
				<key>Replace</key>
				<data>
				AgUAAAAIAAAFAAAA
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>10.10-SNB-Port _0x5-DP2HDMI</string>
				<key>Find</key>
				<data>
				BAYAAAAEAAAJAAAA
				</data>
				<key>Name</key>
				<string>AppleIntelSNBGraphicsFB</string>
				<key>Replace</key>
				<data>
				BAYAAAAEAAAHAAAA
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>Expect 2 matches</string>
				<key>Find</key>
				<data>
				hBnUEQ==
				</data>
				<key>Name</key>
				<string>AppleHDA</string>
				<key>Replace</key>
				<data>
				AAAAAA==
				</data>
			</dict>
		</array>
	</dict>
	<key>RtVariables</key>
	<dict>
		<key>MLB</key>
		<string>C02G4D8BDRJ7P1NTP</string>
		<key>ROM</key>
		<string>817a8561ebca</string>
	</dict>
	<key>SMBIOS</key>
	<dict>
		<key>BiosReleaseDate</key>
		<string>04/22/11</string>
		<key>BiosVendor</key>
		<string>Apple Inc.</string>
		<key>BiosVersion</key>
		<string>MBP81.88Z.0047.B0E.1104221557</string>
		<key>Board-ID</key>
		<string>Mac-94245B3640C91C81</string>
		<key>BoardManufacturer</key>
		<string>Apple Inc.</string>
		<key>BoardType</key>
		<integer>10</integer>
		<key>ChassisAssetTag</key>
		<string>MacBook-Aluminum</string>
		<key>ChassisManufacturer</key>
		<string>Apple Inc.</string>
		<key>ChassisType</key>
		<string>08</string>
		<key>Family</key>
		<string>MacBook Pro</string>
		<key>Manufacturer</key>
		<string>Apple Inc.</string>
		<key>Mobile</key>
		<true/>
		<key>ProductName</key>
		<string>MacBookPro8,1</string>
		<key>SerialNumber</key>
		<string>C02HKK0ODH2G</string>
		<key>Trust</key>
		<false/>
		<key>Version</key>
		<string>1.0</string>
	</dict>
	<key>SystemParameters</key>
	<dict>
		<key>InjectKexts</key>
		<string>Yes</string>
		<key>InjectSystemID</key>
		<true/>
	</dict>
</dict>
</plist>

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By viktr
      Hi!
       
      Please help - cannot install mojave on the gb z370n wifi, 8700, 2x samsung 970 nvme, rx570
      Downloaded latest clover and kexts and installation hangs at the beginning.
      Got some errors at boot (during clover boot, before menu appears) then boot "Mojave install" and then it stuck. Please help. Tried to turn off all fixes, tried old apfs.efi instead of apfsdriverloader - all with no success. Maybe it's a known issue and I'm just doing something completely wrong?
       
      ty
       
       


      clover.tar.gz

    • By NoEnd
      Hi team,
       
      I have tried to update to security update 2019-001 multiple time with no luck, today I've booted the update with -verbose and attached videos shows the details.
       
      Appreciate your help
       
      Thanks
      Untitled.mov
    • By JhonneR
      Good morning, everyone, I'm sorry if I was wrong in choosing the topic but I need help.
      I have found it extremely difficult to mount a Hackintosh in my acer.
      Setup;
      I5 2430m 2.4 6GB RAM
      Mobo P5we0 - Intel intel Graphics 3000
      At the moment I have not found out what my audio codecs are.
      but I'll leave the link on the motherboard.
      however, my real problem is several.
      I have already used the itakos image, I have already used several images that could be installed normally and that after installing the image I do not have internet via cable or wireless.
      And another, I already looked in other forums and I know that I will be called a donkey in the logical question but I have not been able to install the [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url] or clover to start from the Hard Disk, so I do not know what to do.At the moment I still do not know if there has already been someone who has already installed the High Sierra or just the Sierra in this notebook model and obtained permanent success.
      If anyone can help me, I'll be grateful.
      Installations without success, but with the system already installed in ACER;
      SIERRA
      HIGH SIERRA
      MOJAVE
      All with the same symptom. Starting only by the bootable USB stick and without internet connection via cable and wireless.
      Appreciate ! Acer 5750 Official Page
    • By gengik84
      Ciro82==>>Thanks
      Uno dei tre Requisiti:
      Hack funzionante Mac vero Macchina virtuale Impostazioni Bios per il boot:
      Cercate una voce  del tipo “Sata Mode”e settatela  in AHCI
      Secure Boot: disabilitare o altri sistemi operativi
      CSM: UEFI o LEGACY, oppure a secondo del tipo di installazione
      VT-x / VT-d disable
      *Nota: Secure boot e csm valido solo per bios UEFI
      Materiale Occorrente 
      "OS X (Versione App.Store)”
      USB 8GB  *nota: nel caso di usb superiori dovrà essere partizionata, in modo da avere una partizione su cui "lavoreremo,di questa dimensione
      ShowAllfiles 
      kext Wizard 
      Bootloader Clover_2.3k_r xxx:                   http: //sourceforge.n.../cloverefiboot/
      Clover Configurator:                                    http: //mackie100proj...a.org/download/
      FakeSmc.kext:                                            https://github.com/kozlek/HWSensors/releases
      In allegato,a fondo pagina troverete un "pacchetto" contenente : ShowAllfiles, Kext Wizard, FakeSmc.kext: 
      App alternative:
      ESP Mounter Pro: per montare la partizione EFI
      Vi illustrerò tre metodi per creare la usb, ma sono ben distinti… quindi usatene soltanto uno
      Metodo 1: “Install Mac_OS_X.command” Metodo 2: “Create Install Media di Apple” Metodo 3:  Metodo Manuale Alla fine delle preparazione dell’installer, tutti i metodi necessitano l’installazione del Bootloader Clover sulla a vostra USB.
      “CONDIZIONI OBBLIGATORIE”
      PUNTO 1: che la vostra usb sia stata preventivamente nominata USB (caratteri maiuscoli) Tabella di partizione GUID e la formattazione in  Mac esteso Journaled.
      PUNTO 2: che l’installer di OSX si trovi in Applicazioni
      Utility Disco 
      Selezionate la pendrive, andate su “partizione”, selezionate “1 partizione”, impostate Mac OS esteso journaled e date il nome USB, poi in basso cliccate su opzioni e scegliete Tabella partizione (GUID), poi “applica”.
      Immagine 
      Riporto nuovamente l’operazione sopra citata adoperando dal nuovo Utility Disco introdotto su El Capitan.
      Rimane ovviamente invariato nome della usb in ==>> USB (maiuscolo), la formattazione in Mac esteso Journaled e sia la mappa partizione in GUID
      Da utility disco selezionate la usb, cliccate su inizializza.
      dal menù a tendina scegliete la relative impostazioni
      Immagine  
      Procedura effettua da High Sierra è la stessa della precedente, l'unica attenzione e operazione da aggiungere in primis  è cliccare nel menù a tendina in alto sulla sinistra di utility disco e selezionare "mostra tutti i dispositivi"
      Immagine 
       
      =====================
        METODO 1: "Install_Mac_OS_X.Command" Lo script che trovate allegato in fondo alla guida permette la creazione dell’installer in maniera automatica
      Include la possibilità di scelta di tre versioni di osx
      Yosemite El Capitan Sierra Il risultato finale è come quello del metodo "manuale" descritto nella guida, per cui l'installazione avverrà in un solo passaggio, non in due come con il metodo createinstallmedia. 
      Offre inoltre la possibilità di inserire un kernel patchato, utile, per esempio, per chi usa AMD.
      Rimane invariato il nome dato alla usb in USB, mappa partizione e tipo di formattazione
      Se la vostra usb non sarà rinominata nel modo corretto, verrete avvisati dal terminale, quindi non dovrete far altro che apportare la relativa modifica e rilanciare nuovamente lo script
      Esempio
      ===========================
      Metodo 2 
      L'intento è quello di usare la procedura fornitaci direttamente da Apple, "createinstallmedia", introdotta  con Mavericks. 
      Tale metodo prevede l’uso del terminale che via via se ne sta perdendo il “valore e l’uso”
      Inizialmente per i neofiti potrà sembrare problematico ma alla fine non è così.
      Durante il post installazione alcune operazioni ne richiedono l’ uso.
      Perciò mi sono chiesto perchè, qualora uno volesse, non far conoscere da subito un po’ questo “strumento”???
      Per favorirvi vi ho allegato i comandi già  “pronti”, i quali li potrete copiare ed incollare sul terminale.
      A questo punto aprite il terminale, copiate ed incollate il comando sottostante e premete invio, digitate la vostra password e premete nuovamente invio.
      Comando per creare USB con Yosemite:
      sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction  
      Comando per creare USB con El Capitan
      sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app --nointeraction Comando per creare USB con Sierra 
      sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ Sierra.app/ --nointeraction Per creare USB con Hight Sierra o Mojave usate --> C_I_M (aggiornato per 10.14)
       
      Funziona con il drag & drop sul terminale, in questo caso non vi è necessità che la usb sia nominata in un determinato modo ed essendo basato su create install media ovviamente funziona da 10.9 a 10.14.... 
      BENE…IL PROCESSO DI CREAZIONE E’ INIZIATO…
      AVREMO CIRCA 20/30 MINUTI DI TEMPO LIBERO A CUI DEDICARSI A CIO’ CHE VOGLIAMO………………………………………..  
      COLGO L’OCCASIONE PER FARVI NOTARE LA VELOCITA’ E LA SICUREZZA DI QUESTO METODO
      CONFRONTATE QUESTO CON IL TERZO METODO E NOTERETE CHE CON UN SOLO PASSAGGIO, OSSIA IL COMANDO DATO AL TERMINALE, FACCIAMO IN UNA SINGOLA OPERAZIONE TUTTI I VARI STEP DESCRITTI SULL’ ALTRO METODO.
      DETTO QUESTO, MOLTO IMPORTANTE E’ SOTTOLINEARE CHE COSI’ FACENDO EVITEREMO ERRORI  DI DISTRAZIONE RIGUARDO AI PASSAGGI O FRAINTENDIMENTI.
      Immagine 
      Potete adesso passare ad installare il bootloader Clover sulla vostra usb.
      *NOTA*:
      Avendo usato questo metodo l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      =========================
      METODO "MANUALE"....  (lascio per futura memoria-Compatibile fino a 10.12)
      ==========================
      Bootloader
      **Nota:** Installazione in UEFI  dipenderà dalla scheda madre in vostro possesso, quindi se non supporta tale opzione , il bootloader dovrà essere installato in  modalità Legacy.
       Vi invito, qualora non sapeste questa informazione, a recarvi nel sito ufficiale del produttore e controllare le informazioni a riguardo
      Fatto questo dobbiamo installare  Clover sulla usb.
      A seconda del tipo di Bios o al tipo di installazione che vogliamo fare UEFI o Legacy avremo ovviamente configurazioni diverse in questa fase.
      Lanciate il pkg.
      Immagine 

       
      Cambiate la destinazione di installazione ad USB oppure Install Mac_OS_X (a secondo del tipo di creazione eseguita)
      Successivamente clicchiamo su "Ad Hoc"
      Per Installazione UEFI
      Mettete i flag   : Installazione solo per avvio UEFI
                               : installare Clover nella ESP
                               : Driver64UEFI  AptioMemory --> (consigliato) 
                               : Driver64UEFI  ApfsDriverLoader --> (consigliato) --> sostituisce l'uso del driver apfs.efi
                               : Selezionate l'altri driver come da successiva immagine,
       
      *Nota: Altri driver che si possono usare  al suo posto  sono:
       informazioni 
       
      Proseguite con l’installazione.
      Immagine 
      ** Ricordate che avrete accesso a questa cartella dopo aver montato la partizione EFI**
      ===========================
      Per installazione Legacy
      Immagine 
      ===========================
      Impostazione per config.plist:
      Con clover configurator “montate” la partizione EFI della usb.
      1) Per fare questo nel menù di sinistra, cliccate su “Mount EFI”
      2) individuate la partizione relativa alla vostra usb, a questo punto montiamo la relativa partizione EFI  selezionando l’apposito pulsante “Mount Partition”
      Immagine 
      3) Successivamente cliccate su “Open Partition”.. recatevi in EFI/Clover ed aprite il config.plist
      4) Sezione ACPI: Disabilitate tutti i fix sia del menù 1 che del menù 2
      Immagine 
      5) Sezione BOOT: Sole se si sta installando Yosemite mettete il flag su kext-dev-mode=1
      Immagine 
      6) Sezione RT Variables: Se si sta installando El Capitan oppure Sierra, aggiungere i valori: BooterConfig= 0x28, CsrActiveConfig= 0x67
      Immagine 
      7) Sezione System Parameters: Su inject kext mettete YES
      Immagine 
      ===========================
      Nota: Su El Capitan, è stato introdotto SIP (System Integrity Protection)
      Info:
      ===========================
      Recatevi in EFI/Clover/kext/10.x 
      X= alla versione di osx che state installando. Per esempio se installerete Yosemite dovrete recarvi nella cartella 10.10, con El Capitan in 10.11….ecc
      Se non ci fosse tale cartella, createla e nominatela voi a “modo”.
      Copiatevi all’interno FakeSmc.kext
      *Nota se venite già da altre vostre configurazioni, oltre kext sopra citato ,potete mettere gli altri necessari per il vostro hardware
      Stessa cosa se avete DSDT e/o SSDT potete copiarli in EFI/Clover/Acpi/Patched
      Immagine 
      
      Per High Sierra:
      Scaricare il driver apfs.efi a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
       
      Per chi volesse continuare ad usare HFS vi rimando a questo post:
        Come installare High Sierra in HFS direttamente dalla usb  
      Utenti Laptop:  Nel 99% è obbligatorio disattivare la grafica discreta Nvidia/Amd per installare questo nuovo osx
                                     Quindi aggiungete --> SSDT-Disable_DGPU.aml.zip
                                     in EFI/Clover/acpi/Patched della usb
      --------------------------------------------------------------------
      Per Mojave:
      Scaricare il driver apfs.efi per 10.14 a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
      Versione di clover non antecedente a V_4015
      Volete usare HFS?
      E' possibile fare un installazione diretta su altro disco o partizione, nel caso può essere usato anche per effettuare aggiornamenti...
      nel caso guardate...
       Mojave in HFS 
       Oppure direttamente da usb  
       
      Fatto questo avrete la vostra USB bootable per installare OSX.
      ………Non scordatevi Fakesmc.kext da mettere nella relativa cartella…. senza il quale non farete mai il Boot......
      *NOTA: se usato il terminale per la creazione della usb, l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      **NOTA** Se avete processori Broadwell,Skylake o Kabylake...usate FakeSmc.kext e relativi sensors che trovate all'interno del secondo pacchetto.. (potete usarlo anche sui precedenti senza problemi, essendo una versione più aggiornata ha ulteriore supporto per le cpu più recenti)
      Update: Fakesmc e sensors versione 6.26
      Post installazione... post #2           
       Buon Hack….. 
      Aggiornamento:Install_Mac_OS_X.command.zip (compatibile da 10.10 a 10.12)
      le info le trovate a questo post
      Ringrazio @Ciro82 che mi ha aiutato nel preparare questa guida.
      Pacchetto.zip
      Pacchetto-2.zip
      apfs.efi-10.13-NoLog.zip
      Pacchetto-Fake+Sensors 6.26.1440.zip
      apfs.efi-10.13.1-No_LOG.zip
      apfs.efi-10.13.2_No_Log.zip
      apfs.efi-10.13.3-No_Log.zip
      apfs.efi-10.13.4-No_Log.zip
      apfs.efi-10.13.5_No_Log.zip
      C_I_M.zip
       
      apfs.efi-10.14-beta1_No_Log.zip





       

    • By fantomas1
      Hi InsanelyMacaholics   

      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.
       
      10.12.6
      Nvidia Web Driver - 378.05.05.25f13 --> build 16G1815 (thanks to flowrider) New!
      Nvidia Web Driver - 378.05.05.25f12 --> build 16G1710 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f11 --> build 16G1618 (thanks to Frank Nitty)
      Nvidia Web Driver - 378.05.05.25f10 --> build 16G1510 (thanks to BreBo) 
      Nvidia Web Driver - 378.05.05.25f09 --> build 16G1408 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f08 --> build 16G1314 (thanks to BreBo)
      Nvidia Web Driver - 378.05.05.25f07 --> build 16G1314 (thanks to haring)
      Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)
      Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)
      Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)
       
       
      10.12.5
      Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)
       
       
      10.12.4
      Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)
      Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr)  Pascal support!!!
      Nvidia Web Driver - 367.15.10.45f01 --> build 16E195 (thanks to Lanc)
       
       
      10.12.3

      Nvidia Web Driver - 367.15.10.35f01 --> build 16D32 (thanks to shatterhenner)
       
       
      10.12.2
      Nvidia Web Driver - 367.15.10.25f02 --> build 16C68 (see this post)
      Nvidia Web Driver - 367.15.10.25f01 --> build 16C67 (see this post)
      Nvidia Web Driver - 367.15.10.25b06 --> build 16C60b/16C63a (see this post)
       
       
      10.12.1
      Nvidia Web Driver - 367.15.10.15f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).
      Nvidia Web Driver - 367.15.10.15f01 --> build 16B2555 (thanks to Moviemakergr)
       
       
      10.12.0
      Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)
       
       
      GM
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)
       
       
      DP/PB
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun) 
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)
      Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)
       
×