Jump to content
pepto

[GUIDE] Run macOS Sierra on a Dell Latitude E6320

97 posts in this topic

Recommended Posts

Advertisement

Have someone succeed with changing the internal wi-fi card? 
everything else works perfectly on my Dell latitude e6320

Share this post


Link to post
Share on other sites

Great guide, I got macOS working on my E6220. I want to use a second monitor which is a VGA one. I modified the AppleIntelSNBGraphicsFB kext but something went wrong. When I rebooted with my monitor plugged my notebook monitor switched to the VGA monitor resolution, and the VGA monitor was blank. I couldn't change the resolution and update frequency. To revert I had to reinstall macOS. I attach my patched kext. Is the kext badly edited? Or there is any other problem?

 

Thanks in advance

AppleIntelSNBGraphicsFB.zip

Share this post


Link to post
Share on other sites

The vanilla SNB framebuffer kext laptop layout is as follows:

01 02 04 00 10 07 00 00 10 07 00 00     // Nb of connectors -> "04"
05 03 00 00 02 00 00 00 30 00 00 00     // built-in laptop display
02 05 00 00 00 04 00 00 07 00 00 00     // display port
03 04 00 00 00 04 00 00 09 00 00 00     // display port
04 06 00 00 00 04 00 00 09 00 00 00     // display port

`

Your VGA patch certainly seems Ok:

01 02 04 00 10 07 00 00 10 07 00 00
05 03 00 00 02 00 00 00 30 00 00 00
02 05 00 00 00 04 00 00 07 00 00 00
06 02 00 00 00 04 00 00 08 00 00 00     // VGA patch
04 06 00 00 00 04 00 00 09 00 00 00

`

This is how you can most definitely patch the SNB framebuffer kext for a E6220:

01 02 04 00 10 07 00 00 10 07 00 00     // vanilla: nb of connectors -> "04"
05 03 00 00 02 00 00 00 30 00 00 00     // vanilla: laptop's own LCD display
02 05 00 00 00 08 00 00 05 00 00 00     // patched: HDMI, display port #5 (built-in port)
06 02 00 00 00 04 00 00 08 00 00 00     // patched: VGA, display port #8 (built-in + docking-station port)
04 06 00 00 00 04 00 00 07 00 00 00     // vanilla: DVI, display port #7 (docking-station port)

See: http://forum.osxlatitude.com/index.php?/topic/7914-dell-latitude-e6220-with-i5-2520m-hd3000-and-1366x768-lcd-mavericksyosemiteel-capitansierra/&do=findComment&comment=57882

 

The VGA Patch can also take any of the following 3 x forms:

06 02 00 00 00 01 00 00 08 00 00 00     // connector-type 0001 0000
06 02 00 00 00 10 00 00 08 00 00 00     // connector-type 0010 0000
06 02 00 00 10 00 00 00 08 00 00 00     // connector-type 1000 0000

`

Just make sure to:

  1. replace the vanilla SNB FB kext in /S/L/E by the patched one or increase the patched kext version and copy it to /L/E
  2. repair permissions to /S/L/E or /L/E
  3. rebuild your cache

Share this post


Link to post
Share on other sites

 

Thanks, I solved by copying the patched kext to L / E. Now I have another problem. In both my monitors, especially when I use my browser or the Launchpad, I see white stripes blinking. It looks like a refresh problem, but from the settings I can’t fix it. What can it be?

Share this post


Link to post
Share on other sites

The E6x20 do not support UEFI mode well with OS X. Make sure you've kept your BIOS to Legacy mode or you'll have trouble booting OS X.

 

First of all thanks all for this great guide and contribution.

 

Hi Herve! 

 

I could install OSX Sierra in UEFI mode (I also chose the UEFI mode in BIOS of laptop). It's look like OSX can booting well and work fine.

But I have some doubts concerning your message. What exactly did you  mean when you wrote about "trouble booting OSX"? 

 

At this moment I have only these troubles:

1) OSX see web camera in hardware list but it does't work (the indicator works but I can't see the picture)

2) track pad works but w/o any additions functions (3/4 fingers double tap with 2 fingers and etc). I also don't see it in setting

3) audio card works but sometimes there is a noise when any other process try to play sound (I don't know may be all have such problem)

Share this post


Link to post
Share on other sites

Hi, i've updated Sierra to 10.12.4 and now I have black screen after Apple logo.

My system is a Dell Latitude E6320, configured as Macbook8,1, with OSX and Clover installed on secondary SSD (in the expansion bay, instead of the DVD Drive).

 

I've tried to follow other tutorials with similar problems, but nothing apply to my case. The Dell E6320 has Intel HD Graphics 3000 and the majority of posts I've found is about Nvidia cards.

 

I made the stupid mistake to not update Clover BEFORE updating Mac OSX...the only thing that works is the recovery partition, so I can use terminal and read OSX partition and EFI partition.

 

 

there's someone that can help with this?

 

Many thanks!

Share this post


Link to post
Share on other sites

Many similar reports on several other platforms. Has to do with Clover which needs to be updated apparently...

 

Hi, you're right, and I've managed to update Clover to the latest version without reinstalling.

 

For those interested, this is a recap of what I do:

1 - I have created a [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] installation from a working Mac; if you haven't noticed, after [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] have created the USB boot drive, he left the EFI partition mounted and visible on the Mac.

I've taken all the files in EFI and then copied in another USB pendrive.

2 - I've booted my Dell E6320 with Ubuntu (any Linux system is ok), because I have 2 SSDs, one with Windows 7, 10 and Ubuntu, and the second with OSX (thanks to expansion bay :) )

3 - I've mounted the EFI partition in Ubuntu using Disk Utility (you can use any disk utility, like Gparted, or go with the shell)

4 - I've made a backup of the actual EFI folder and replaced with the EFI taken from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] setup (copied in the pendrive, remember?);

5 - from the OLD EFI/CLOVER folder I've taken the config.plist and copied over config.plist in the NEW EFI/CLOVER

6 - from the OLD EFI/CLOVER/kexts folder i've taken all the content of the 10.12 and Other folder, then copied in the corresponding folder in NEW EFI/CLOVER/kexts folder

 

Incredibly, the system starts again... now I must correct the last problem: USB ports doesn't work, so the Wi-Fi dongle doesn't works too... but keyboard/audio/trackpad and touchpad, VGA out/docking station with dual monitors works without problem :) so it's a 99% Win!

 

If anyone can help with the USB problem, is very welcome :)

Share this post


Link to post
Share on other sites

Sorry for my posting about tonymacx86... was not my intentio to break any rule.

 

In any case I don't request support for tony's stuff, I've used it because the lack of infos to perform an upgrade of Clover without reinstalling the entire system, and I've simply tried his tool only because, well, I've tried almost all.

 

In fact, the only help his tool give to me is the updated EFI folder which I used to upgrade my EFI folder using Linux.

 

In any case, I've also resolved the last problem, the USB not working... I've noticed that Clover has many files in EFI/CLOVER/ACPI; i've simply copied it from my old EFI folder et voila: USB working again!

 

Sorry for my posts, I hope I can help someone :)

Share this post


Link to post
Share on other sites

I have managed to get yosemite working on my Dell 6320 but I am unable to get Sierra working by doing everything in this guide to the letter and using both the included clover and the newest version.

 

The bootable usb starts fine but the loading bar will get to the end and the screen will go as attached with a blurred apple logo and loading bar across the screen.

 

I have tried so much including a solution on a different popular fourm where this happens in el captain but had no luck.

 

I am installing the final version of sierra 10.12.4 and my specs are exactly the same as the machine shown in this guide. Help would be so much appreciated!

post-2056490-0-30194600-1492367659_thumb.jpg

Share this post


Link to post
Share on other sites

I followed this great tutorial and here are my notes to make things work:

 

- use Clover version 4049 or later instead of the older one provided in the zip file, and make sure this version is installed in the HDD EFI (step 15), otherwise the boot from HDD ends up with a black screen

 

- As per post #7, only patch needed is IOGraphicsFamily:

Find 0100007525
Replace by 010000EB25
 
- For wifi, I have installed a Broadcom BCM43224-HMS to replace the original Dell chip, the ID is 14e4:4353. It's supported natively by the OS as long as you define your machine to be a MacBook Air 5,2 in Clover (to conform with the white list set by Apple)
 
- Wifi will work fine only if you disable bluetooth in the BIOS, otherwise it keeps disconnecting/reconnecting every few seconds

 

Share this post


Link to post
Share on other sites

- Wifi will work fine only if you disable bluetooth in the BIOS, otherwise it keeps disconnecting/reconnecting every few seconds

 

That's not a widespread or general behaviour. It may simply be that your own system is fitted with its own DW3xx bluetooth module that clashes with your particular wireless card. Can't see why though. Never had such issue on any of my Dell laptop Hackintoshes... and I have a few and I've tested many different wireless cards!

Share this post


Link to post
Share on other sites

That's not a widespread or general behaviour. It may simply be that your own system is fitted with its own DW7xx bluetooth module that clashes with your particular wireless card. Can't see why though. Never had such issue on any of my Dell laptop Hackintoshes... and I have a few and I've tested many different wireless cards!

 

I got the idea from this post: http://www.insanelymac.com/forum/topic/319901-broadcom-bcm943224hms/page-2?do=findComment&comment=2344550 (although they seem to talk about the switch) but it worked for them too.

I was running Yosemite before and the 2 pieces of hardware worked fine together, but I was using a different kext (BCM5722D) at the time. So I think it's an issue with the Airport kext (AirPortBrcm4360), it may be missing a patch but I tried many things without success.

Share this post


Link to post
Share on other sites

Can't see why you'd use BCM5722D kext either. BCM43224-based Dell card DW1520 (14e4:4353) works natively with AirPortBrcm4360 patch if not using MBA5,1 SMBIOS. I mean there's absolutely no need for any additional kext since dev id 4353 is covered by the vanilla kext. I can vouch for it, I've got one myself... I'd have to test again but I do not recall any intermittent disconnection or any clashes with the built-in DW375 in my E6220 or the DW380 in my E6230 which I kept enabled to get BT services.

 

http://forum.osxlatitude.com/index.php?/topic/2120-inventory-of-supported-and-unsupported-wireless-cards/

Share this post


Link to post
Share on other sites

Took the DW1520 out of the cupboard to test it again on my E6220. I can indeed reproduce the issue of disconnections whether using the native Brcm4360 kext with MBA5,2 SMBIOS or patching it for MBP8,1 SMBIOS. Ok once Bluetooth is disabled in BIOS (my E6220 has a built-in DW375 module) or if the card is moved to the WWAN slot (needs a full size mini-PCIe bracket).

Share this post


Link to post
Share on other sites

Do you need new files for the boot and clover folder when using the 4049 version or can you use the ones provided in the zip?

Share this post


Link to post
Share on other sites

I followed this great tutorial and here are my notes to make things work:

 

- use Clover version 4049 or later instead of the older one provided in the zip file, and make sure this version is installed in the HDD EFI (step 15), otherwise the boot from HDD ends up with a black screen

 

- As per post #7, only patch needed is IOGraphicsFamily:

Find 0100007525

Replace by 010000EB25

 

- For wifi, I have installed a Broadcom BCM43224-HMS to replace the original Dell chip, the ID is 14e4:4353. It's supported natively by the OS as long as you define your machine to be a MacBook Air 5,2 in Clover (to conform with the white list set by Apple)

 

- Wifi will work fine only if you disable bluetooth in the BIOS, otherwise it keeps disconnecting/reconnecting every few seconds

Thanks for this, got the laptop working 100% by adding this patch unfortunatly the laptop died after so sending it back on ebay. Out of interest can I use the same usb and method if I buy the i7 version of the laptop?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Jiji The Fox
      Hey, long time no post!
       
      Apologies if this has been answered, every time I search I get a timeout on the site and I can't seem to get the search to work
       
      I've been sitting pretty with Yosemite for a while , but a recent hardware upgrade (Audio interface) means I can jump from Yosemite. 

      I've successfully upgraded Clover, then the OS and for the most of it, it seems great. Everything works but the Graphics Driver (NVidia GeForce GTX670.)
       
      I can only boot into Mac if disable the NVIDIA drivers with the boot flag nv_disable=1  however that's not great I end up with one monitor working at 1024 x 768.
       
       
      I've updated the NVIDIA web drivers to the latest my build of sierra can take. 
      I have the boot flag for web driver to be enabled (can't remember off the top of my head.. I'm on the work pc, soon to be home)
       
      Any ideas would be grateful, I spent much of last night and morning on this.

      Many Thanks
       
      UPDATE: I've managed to load successfully, between a combination of changing the SMBIOS to MacBook 14,2 and loading lilukext with NVIDIAgraphicsfixer.
       
      Everything is the same as Yosemite, except I do not have HDMI audio or onboard sound. I do have a dedicated audio interface so I'm not at a true loss.
       
       
    • By zebity
      Hi Hypervisors,
       
      I have been working to move my Late 2009 Xserve MacOS Server onto Ubuntu 18.04 LTS QEMU/KVM based virtual machine using OVMF and Clover.
       
      After much effort and testing based on the following information from: Kraxel's, Kholia, Gordon Turner and Clover site:
      https://www.kraxel.org/blog/2017/09/running-macos-as-guest-in-kvm/
      https://github.com/kholia/OSX-KVM
      https://gist.github.com/gordonturner/2a2e5ecde5e7860b52e2
      https://clover-wiki.zetam.org/Home
       
      I have now managed to get OVMF/Clover boot and install of MacOS Sierra.
       
      I started with Ubuntu 16.04 initially but this required download and compile of QEMU to get update of machines to: pc-q35-2.9 or better, so I moved to Ubuntu 18.04, which has pc-q35.2.11 available as standard.
       
      So I am now working with standard Ubuntu 18.04 LTS based systems with following packages: kvm/qemu/libvirt/bridge-utils/ovmf/virt-manager
       
      As I want to use PCIe Passthrough for a number of PCIe card currently installed in the server (SmallTree 10GbE & Areca ARC-1883 SAS RAID) I set up my machine with linux kernel boot configuration (/etc/default/grub) of: 
      GRUB_CMDLINE_LINUX_DEFAULT="iommu=1 intel_iommu=on" (as my machine is intel VT-d based HW virtualisation)
       
      This resulted in creation of a number of iommu groups (see /sys/kernel/iommu_group directory for this and this posting for information: https://forum.level1techs.com/t/ubuntu-17-04-vfio-pcie-passthrough-kernel-update-4-14-rc1/119639 , noting that Ubuntu 18.04 LTS has kernel version: 4.15.0-22-generic so there is no need to do kernel update for iommu to work).
       
      Using bare minimal Clover config.plist:
       
       
      And following Clover UEFI drivers:
       
      I can boot MacOS, but it is very very slow... it sits on the apple boot logo for over a minutes before finally moving onto the progress bar.
      The other problem I have is that no PCI or Network devices appear in the "About This Mac" System Information Report and I cannot get any network connectivity from bridged E1000 network device.
       
      Here is my virtlib.xml dump for the virtual machine:
       

      Can any one advise of whether I need to update the CLOVER config.plist to add extra items in to allow network and PCI Passthrough to work.
       
      Thank you.
       
      Regards,
       
      Zebity
       
    • By Gymnae
      Introduction
      The H370 chipset powers 8th generation Intel Core-i CPUs. Even though the name H370 rings comparable to Z370, the H370 is based on newer silicon. This it also requires some new approaches compared to the Z370. An example would be on-die USB 3.1 and WiFi support.
       
      Since this guide is not a "hold-your-hand-every-step" guide, I assume you know:
      Clover installation and configuration How to create an install medium for MacOS Access and configure the BIOS Have heard of ACPI patching (I'm a newb at this myself)  
      What works
      Sleep (via DSDT edits and emulated NVRAM) On-board Audio (via CloverALC script) Native power management (without any kext or patch) All USB ports (and only those present are active) iGPU for both acceleration and display dGPU (I'm running an Nvidia GTX 1080)  
      Untested
      NIC --> I'm using WiFi only  
      What doesn't work
      Native NVRAM via AptioMemoryFix.efi DMVT Pre-alloc higher than 64MB (but not necessary)  
      Changes to the guide:
      22.5.18: Added SSDT hot-patching to enable sleep, replacing DSDT static patching as an alternative.
      23.5.18: Add iMac18,1 as alternative SMBIOS config for those relying on the iGPU for output
       
      1. Installation
      This guide heavy inspired by the work of /u/corpnewt of /r/hackintosh and his (sorta) Vanilla guide
       
      1.1 Create the install media for MacOS
      Follow this, if you are using a Mac to start off with. If you are totally new to MacOS, then please check the basic guide Creation of an installer media in windows or linux
       
      1.2 Install Clover on the install media
      Using the Clover installer, ensure you are installing to the USB medium you are using for the installer.
      Chose the following options:
      AptioMemoryFix UEFI booting only Install to ESP You have to get your hands on an apfs.efi. A google search can help, or extracting it from the Installer package. Make sure you procure a version matching the MacOS version you are about to install. Place the apfs.efi in drivers64UEFI.
       
      1.2 Adjust the config.plist for the installer
      You can use the config.plist attached as a guideline, but take a look at it before and at least adjust the SMBIOS - otherwise it won't boot.
      Attention: The attached plist contains audio patches introduced by a post-install step. If you run into problems, you might remove those. It also contains a manual slide value, which should normally not be needed, but works fine for me. It is also tuned for usage with an Nvidia Pascal dGPU as main GPU.
       
      The config you create now should serve you nicely for install and running the system.
       
      Take care of adding the following basics:
      SMBIOS: iMac18,3 - You can generate a serial number via Clover Configurator. The creation of a proper SMBIOS is covered in many guides to good extend Note: If you aim at using the iGPU for output, a user reported that iMac18,1 works better - since iMac18,3 produces sever flicker. Look at the graphics section and adjust the injection for Intel to your situation  
      Fixes

      Patches

      Devices

      Graphics

      Kernel and Kext patches
       
      1.3 kexts and friends
      Add the supplied SSDT-UAIC.aml to "patched" - it limits the injected USB Ports to the actual number and ports valid for this board.
       
      Required kexts on "Other":
      FakeSMC.kext IntelGraphicsFixup.kext Lilu.kext When having an Nvidia card: NvidiaGraphicsFixup.kext IntelMausiEthernet.kext in case you're running Ethernet USBInjectAll.kext with the HCI-300-series-injector.kext --> These two should be installed to /L/E after install  
      We are leaving sound out at the moment, this is something for post-install. Please note the absence of Shiki, I don't find it necessary. Video material I tried made use of the iGPU without shiki.
       
      1.4 Check BIOS and install
      You should be ready for install. But before you reboot, please take a look at your BIOS and set it up accordingly (copied from the aforementioned guide and adapted):
      Load Optimized Defaults Disable VT-d setting If your system has Secure Boot Mode, disable it Set OS Type to Windows 8/10 or OtherOS - I have not seen a difference Turn off internal Serial and Parallel port Turn off Network stack for boot Turn off wake-on-lan (for now) Set XHCI Handoff to Enabled Don't enable decode over 4G Depending on your GPU, set priority for boot Set internal GPU to enable Set DMVT pre-alloc to 64MB Set USB legacy to enabled Activate XMP profile 1 f your Ram has it (mine doesn't and I added the timings manually) Set ERP to enable, disable platform power management (I need to do more research if this could be enabled)  
      I've attached my current BIOS config "hack2". You can place that on a fat32 drive (the EFI partition of your install USB drive might be an idea) and see if it loads. It's made for and with the F2 BIOS.
       
      The install itself should be like other MacOS Hackintosh installs with it several reboots and ensuring to select the correct boot device in Clover.
       
      2. Post-install
       
      2.1 Install clover on target
      This is a no-brainer, but install a fresh copy of Clover on your target medium.
       
      During install select again AptioMemoryFix but also additionally
      EmuVariableUefi-64.efi Install RC scripts on target volume because otherwise NVRAM doesn't seem to work
       
      After the install, copy
      config.plist contents of "Other" content of "patched" apfs.efi from drivers64UEFI to your new clover install.
       
      2.1 Edit ACPI for slumber
      Choose one option, not both. The hot-patch is experimental, but for the moment it is stable.
       
      2.1.1 Edit DSDT
      This is necessary only once on initial install and every time, you edit or upgrade the BIOS. The DSDT.aml attached to this post might work for your system or give you a file to compare to. Don't expect it to work for you, though.
      I won't go into the details of DSDT extraction and patching. There are better guides (the linked guide is a rip-off of rehabman's guide from a different forum). Please follow such a guide to extract your ACPI data.
       
      Locate and disassemble the DSDT with the newest iasl binary you can put your hands on, then open it with MacIASL in its newest version you can find (Hint: Here is a good source) You can check if the version is new enough if MacIASL doesn't throw error upon compiling a freshly extracted DSDT.aml or DSDT.dst
       
      Add rehabmans repo (as per linked guide) and apply the following patches:
      Rename _DSM to _XDSM Fix _WAK Arg0 v2 USB3 _PRW 0x6D Skylake (instant wake) Find the CNVW device and remove the _PWR function there.
       
      Compile the DSDT and place it in "patched".
       
      2.1.2 Use SSDT hot-patching
      Instead of having to re-extract and re-patch the DSDT on every BIOS change or update, Hardware change one can also use ACPI hot-patching.
      It's a combination of config.plist patches and an SSDT, which is hot-patched into the ACPI (if I understand the process correctly)
       
      You need to add this SSDT-GPRW.aml to your Clover folder in the designated position at Clover/ACPI/patched You need to add this patch to your config.plist. It goes into the DSDT patch section  
      Note: This works for me, but the patch removes the _PRW method from all devices in the DSDT. This could have side-effects. So far, I have seen none. At the moment I'm also not applying any other patch, compared with the additional edits I made to the DSDT method before.
       
      2.2 Install kexts to system
      As mentioned in the install section, it's better to follow rehabman's instruction and install USBinjectAll.kext to /L/E:
      sudo cp -R Release/USBInjectAll.kext /Library/Extensions sudo touch /System/Library/Extensions && sudo kextcache -u / 2.3 Enable onboard Audio
      This is where I'm not so happy currently, I'd like it to work without altering AppleHDA. But currently I find no other way.
       
      2.3.1 Install FakePCIID & FakePCIID_Intel_HDMI_Audio
      Rehabman tells us to use a kext installer to install it to /S/L/E. Chose the RELEASE folder
       
      2.3.2 Run CloverALC command
      Ensure your EFI partition is mounted before running this command
      Get the newest version of CloverALC command (audio_cloverALC-xxx.sh) and run it. Our Audio codec is RTL887 and I'm running with layout ID 1
       
      2.4 Optional steps
      If you have a dGPU, now it's the time to install its drivers and adjust the config.plist for it.
      This is out of scope of this guide. Yet, my supplied config.plist is ready to be used with Nvidia Pascal cards and using the Nvidia web driver.
       
      3. ToDo
      Move away from static DSDT patching to SSDT hotpatching --> requires my work Native NVRAM --> requires developer work Audio without AppleHDA patching --> requires developer work  
      4. Thanks to
      @MaLd0nfor helping finding the right way with the DSDT
      @RehabMan, for being a legend and helping me out patching
      @toleda, for audio patches for the 300 series
      /u/corpnewt, for his superb vanilla guide
      @wmchris for his super XPS 9550 guide and introducing me to hot-patching
      all the developers of clover and it's awesomeness
       
      SSDT-UIAC.aml
      config.plist
      DSDT.aml
      hack2
    • By MaLd0n
      Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder CLOVER Install.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder CLOVER Post Install.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
×