Jump to content
tluck

[GUIDE] Lenovo T460 macOS with Clover

811 posts in this topic

Recommended Posts

Just a note on cleaning up my install, before moving on to a Mojave upgrade. 

I wanted to update as much of my kext's as possible, clover, and my config prior to upgrading. I thought I would document what works for me. 

 

First updated Clover to 4670, as pushed by @tluck to hist T460 git repo. 

 

Next updated my kext's: 

FakeSMC.kext                            Rehabman   - 6.26-357-gceb835ea.1800
IntelMausiEthernet.kext                 Rehabman   - 2.4.0d0
USBInjectAll.kext                       Rehabman   - 0.6.5
AppleBacklightInjector.kext             RehabMan   - 0.9.2 (from TLUCK repo)
Lilu.kext                               as.vit9696 - 1.2.7
AppleALC.kext                           as.vit9696 - 1.3.2
WhateverGreen.kext                      as.vit9696 - 1.2.3
ACPIBatteryManager.kext                 Rehabman   - 1.90
BrcmPatchRAM2.kext                      TLUCK      - 2.2.7b
BrcmFirmwareRepo.kext                   TLUCK      - 2.2.7
FakePCIID_Broadcom_WiFi.kext            Rehabman   - 1.3.13
FakePCIID.kext                          Rehabman   - 1.3.13
VoodooPS2Controller.kext                Rehabman   - 1.8.32 *

* I tried the latest VoodoPS2Controller.kext -- It causes a KP on sleep.

Edited my config.plist to set Intel 520 graphics parameters per Whatevergreen config (Without this the Intel FB will panic and cause a reboot loop): 

         <key>Properties</key>
         <dict>
            <key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
               <key>AAPL,ig-platform-id</key>
               <data>
                  AAAWGQ==
               </data>
               <key>device-id</key>
               <data>
                  FhkAAA==
               </data>
               <key>enable-hdmi20</key>
               <data>
                  AQAAAA==
               </data>
               <key>framebuffer-fbmem</key>
               <data>
                  AACQAA==
               </data>
               <key>framebuffer-patch-enable</key>
               <data>
                  AQAAAA==
               </data>
               <key>framebuffer-stolenmem</key>
               <data>
                  AAAwAQ==
               </data>
               <key>framebuffer-unifiedmem</key>
               <data>
                  AAAAgA==
               </data>
            </dict>
         </dict>

removed intel inject, and my SSDT patch for IGPU. This gives me a up-to-date T470 (I5-6300u) running High Sierra. Now on to Mojave.   

Share this post


Link to post
Share on other sites
Advertisement
On 9/27/2018 at 1:34 PM, verleihnix said:

I used clover 4670 from tluck t420 pack.

And the the new virtualsmc.

but that should not be the problem.

To get back into OS you can mod graphics platform ID to 0x12345678 manually during clover boot.

EFI.zip

good stuff verleinix.

 

maybe the gfx fix is the inclusion and use of whatevergreen.kext?

cool to see that the new VirtualSMC works!

but surprised to see VoodooHDA instead of AppleALC? 

 

4 hours ago, kolodzieski said:

Just a note on cleaning up my install, before moving on to a Mojave upgrade. 

I wanted to update as much of my kext's as possible, clover, and my config prior to upgrading. I thought I would document what works for me. 

 

First updated Clover to 4670, as pushed by @tluck to hist T460 git repo. 

 

Next updated my kext's: 


FakeSMC.kext                            Rehabman   - 6.26-357-gceb835ea.1800
IntelMausiEthernet.kext                 Rehabman   - 2.4.0d0
USBInjectAll.kext                       Rehabman   - 0.6.5
AppleBacklightInjector.kext             RehabMan   - 0.9.2 (from TLUCK repo)
Lilu.kext                               as.vit9696 - 1.2.7
AppleALC.kext                           as.vit9696 - 1.3.2
WhateverGreen.kext                      as.vit9696 - 1.2.3
ACPIBatteryManager.kext                 Rehabman   - 1.90
BrcmPatchRAM2.kext                      TLUCK      - 2.2.7b
BrcmFirmwareRepo.kext                   TLUCK      - 2.2.7
FakePCIID_Broadcom_WiFi.kext            Rehabman   - 1.3.13
FakePCIID.kext                          Rehabman   - 1.3.13
VoodooPS2Controller.kext                Rehabman   - 1.8.32 *

* I tried the latest VoodoPS2Controller.kext -- It causes a KP on sleep.

Edited my config.plist to set Intel 520 graphics parameters per Whatevergreen config (Without this the Intel FB will panic and cause a reboot loop): 


         <key>Properties</key>
         <dict>
            <key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
               <key>AAPL,ig-platform-id</key>
               <data>
                  AAAWGQ==
               </data>
               <key>device-id</key>
               <data>
                  FhkAAA==
               </data>
               <key>enable-hdmi20</key>
               <data>
                  AQAAAA==
               </data>
               <key>framebuffer-fbmem</key>
               <data>
                  AACQAA==
               </data>
               <key>framebuffer-patch-enable</key>
               <data>
                  AQAAAA==
               </data>
               <key>framebuffer-stolenmem</key>
               <data>
                  AAAwAQ==
               </data>
               <key>framebuffer-unifiedmem</key>
               <data>
                  AAAAgA==
               </data>
            </dict>
         </dict>

removed intel inject, and my SSDT patch for IGPU. This gives me a up-to-date T470 (I5-6300u) running High Sierra. Now on to Mojave.   

 

if you zip it up. happy to merge into the guide. 

Edited by tluck

Share this post


Link to post
Share on other sites
20 hours ago, tluck said:

good stuff verleinix.

 

maybe the gfx fix is the inclusion and use of whatevergreen.kext?

cool to see that the new VirtualSMC works!

but surprised to see VoodooHDA instead of AppleALC? 

 

 

if you zip it up. happy to merge into the guide. 

I pushed it all to my fork of your repo and sent you a pull request. The content is included in the DSDT470/CHANGELOG.md file. 

 

Should I push a zipfile, of my kexts? 

Share this post


Link to post
Share on other sites
On 10/9/2018 at 2:46 AM, Fleshboy55 said:

Does anyone work one or two fingers scrolling as it works on Windows. How are you doing with scrolling?

Using the 

VoodooPS2Controller.kext                Rehabman   - 1.8.32 

I have no problem scrolling with two fingers. 

 

Three finger swipe to Mission Control also works fine. 

 

As previously mentioned the latest version of that kext causes a sleep problem for me. I have yet to investigate that. 

Share this post


Link to post
Share on other sites

Hi all - Currently working on a Lenovo t470s using the files here and with a bit of help from some of the forum heads :)

 

System is working however issue with battery indicator (system has 2 batteries).

 

I've extracted my DSDT and tried to follow luck's guide to patching so hopefully some can help walk me though it.

 

attachedCLOVER.zip

 

Thanks in advance

Share this post


Link to post
Share on other sites

@tluck  T460s doesn't boot with the new AppleALC in your Repo 12. Oktober 18

----------------------------------------------------------------------------------------------------    

i don't can install Mojave 

 

Edited by ka209

Share this post


Link to post
Share on other sites
On 10/13/2018 at 1:50 AM, mihu_yo said:

Hy!

does someone know why I get an error every time I open my Mac?

panic.rtf

Possibly the same nvram issue I had. 

 

I worked though it with Rehabman on tonymac, perhaps this thread will help:

 

https://www.tonymacx86.com/threads/solved-lenovo-t470-build-mostly-working.258467/

 

Cheers,

Scott.

 

3 hours ago, ka209 said:

@tluck  T460s doesn't boot with the new AppleALC in your Repo 12. Oktober 18

----------------------------------------------------------------------------------------------------    

i don't can install Mojave 

 

 

Did you try the one I mentioned recently in this thread: 

 

AppleALC.kext                           as.vit9696 - 1.3.2

 

I had no problem installing Mojave. Be sure to add all kext's to CLOVER, so during the multiple reboots you are good. 

Share this post


Link to post
Share on other sites
On 10/14/2018 at 7:25 AM, ka209 said:

@tluck  T460s doesn't boot with the new AppleALC in your Repo 12. Oktober 18

----------------------------------------------------------------------------------------------------    

i don't can install Mojave 

 

 

the AppleALC from the previous release was 

  • AppleALC (1.2.7-tluck) (custom for T460 - has extra 32MB DVMT patches)

The latest AppleALC release is 1.3.3 (pretty much the same as 1.3.2 but with a few unrelated codec additions)

 

A big difference between 1.2.x and 1.3.x is that the Intel FB patching is removed (so it doesnt patch DVMT anymore). WhatEvergreen.kext should provide this support AFAIK.

 

see @kolodzieski post from Oct 4 about properties etc. - may need to update your config.plist files. sorry I cant test the builds.

 

 

Edited by tluck

Share this post


Link to post
Share on other sites

The latest configuration from tluck doesn't work properly on my T460 (I7, 6600u, 16Go RAM, SSD 512Go) with High Sierra 10.13.1 (also tried on update to 10.13.6). I can only start with config.noSKL.plist. Of course, in that case, the HD520 is improperly recognized (shown as 7Mb in "About Mac").

 

The EFI configuration from Fleshboy55 fixed the issue (although I don't know what it did to make it work). I'm attaching my EFI folder as ZIP which works fine with High Sierra 10.13.6.

 

I've tried to compare config.plist but there are too many differences. Note that the config.plist within this EFI folder lacks support for Broadcom wifi card. I've also left inside my own patched and compiled ACPI tables.

EFI.zip

Edited by vanadium

Share this post


Link to post
Share on other sites

Okay, from my understanding seems like WhatEvergreen.kext is now handling everything related to video (instead of the Intel video fixup kext).

 

So far working fine:

- Brightness,

- Sound,

- GFX (Intel 520 with 2048Mb)

- Shutdown,

- Battery status (get 7h with a single 48Wh battery),

- Ethernet only when connected on startup,

- Sata 3 512GB SSD (Toshiba) is properly running with APFS filesystem, TRIM is enabled.

 

I'm waiting for a broadcom Wifi card to replace the intel one. (and modify the config.plist accordingly)

 

It's an amazing work @tluck you did there! It's my first hackintosh and I could make it work in a single day, without any prior knowledge. (other than the fact i'm software engineer)

 

Share this post


Link to post
Share on other sites

Hello everyone

I just got a dock for my T460s, but unfortunately none of the video ports work - no HDMI, no DP.

HDMI on the right port works, haven't checked mini DP. 

 

first time I connected the monitor and woke from sleep the monitor turned on with messed up colors, while the thinkpad display had no problems at all. 

it never happened again, now the monitor just won't turn on or get a signal. 

 

@barrrrt did you make it eventually? 
I tried to change framebuffer params  as in

Quote

 

On 1/11/2017 at 4:32 PM, tluck said:
@barrrt - HDMI works from my dock - but maybe you need some patching for tuning the timing?

port 105 - is mini DP on left side - i have been leaving this alone.

port 204 - is HDMI on right side - and/or Dock Port 1 - which is DP or HDMI

- with clover i change it from type 0004 (DP) to 0008 (HDMI) on port 204

so on the dock thing - you might want to try changing HDMI buffer params.

see patch 24 in new config.list - HDMI-audio, port 0204, 0x19160000 - T460 HDMI on right side

find:

02040A00 00040000 87010000

replace:

02041200 00080000 87010000

 

but it only made both my screen go black as I plugged the monitor on DP.

and also tried to change LayoutID in SSDT-HDEF, but that generated the "reboot on plugging" that you had (again both DP and HDMI). 

 

Any ideas? Thanks in advance 

Share this post


Link to post
Share on other sites
On 10/16/2018 at 9:30 PM, tluck said:

you can try this config.plist -it has what @verleihnix described he did to make gfx work with WhatEvergreen.kext.

seems to be what fleshboy has too. it sets properties for GFX - config.plist

Hello and thank you all for these information.

Can someone guide me to the right direction for completing my installation of Sierra 10.12.6 to a t460 with i5 and intel graphics ?

I have managed to install using initial guide, but with this config. (using the config from the package gave me kernel panic, and had to use no skl config)

The only things not working are battery estimate and Fn. key to modify brightness.

I don't want to be on the latest version of macOS, but would like to have all things working.

Thank you in advance.

Edited by ravest

Share this post


Link to post
Share on other sites

I have a Lenovo ThinkPad T540p :i7 4700HQ , 16gb Ram , Intedrated HD4600 , WI-FI Intel NO compatible ......
This is my folder OEM .
In DSDT I only mapped the USB ports , would you recommend a WI-FI compatible with 10.14 ??

Success obtained thanks to the support of Gengik84, Foskvs,Icanaro and SSDT T540p found on the web

20BFS0XA00.zip

Edited by Baio77

Share this post


Link to post
Share on other sites
On 10/31/2018 at 7:32 PM, verleihnix said:

Hi,

update to 10.14.1 went smooth.

All is ok for now.

 

Hello!

Does it means that I can update via App Store up to 10.14.1 without any worries?

I want to update, but since last minor update was stuck on black screen after loading and self-repair after few reboots, I have big question on that the major update like this will not broke everything.

Share this post


Link to post
Share on other sites
18 hours ago, StrangerXXX said:

Hello!

Does it means that I can update via App Store up to 10.14.1 without any worries?

I want to update, but since last minor update was stuck on black screen after loading and self-repair after few reboots, I have big question on that the major update like this will not broke everything.

So, for me it went smooth.

You should have clover and kext up to date.

It will not update with HFS+.

But it is your Risk.

 

Maybe someone else has any experience  as well

Share this post


Link to post
Share on other sites
12 hours ago, verleihnix said:

You should have clover and kext up to date.

 

 

Could you please post your clover and kexts versions?

I will appreciate you for that

Share this post


Link to post
Share on other sites
On 11/20/2018 at 8:16 AM, verleihnix said:

Here is my EFI folder

EFI.zip

Is your screen brightness working?  I have the same T460 as you with everything working except for the screen brightness.  

Share this post


Link to post
Share on other sites
3 minutes ago, Blaggah said:

Is your screen brightness working?  I have the same T460 as you with everything working except for the screen brightness.  

Yes, you have to build your own AppleBacklightInjector.

The tool is located in Tluck's pack, Utilities/Create_AppleBacklightInjector_kext

Share this post


Link to post
Share on other sites
40 minutes ago, verleihnix said:

Yes, you have to build your own AppleBacklightInjector.

The tool is located in Tluck's pack, Utilities/Create_AppleBacklightInjector_kext

Nice, i managed to do it.  Thanks.  How would i go about doing the same on my x1 carbon 4th generation?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SepehrM
      I'm trying to install High Sierra 10.13.3 on an ASUS N552VW laptop, and I get stuck after this message:
      "could not recover SATA HDD after 5 attempts, terminating" 
      And some other warnings afterwards.
      Specs:
      CPU: Intel Skylake 6700HQ 2.6GHz
      RAM: 16GB DDR4
      2TB HDD + 128GB SSD
      GPU: Intel HD Graphics 530 + Nvidia GTX960m
      I'm installing using a 16GB USB3 flash drive on one of HDD volumes (UEFI Mode)
       
      I uploaded the verbose log and clover config.plist
      config-new.plist

    • By Leinad12
      Olá a todos.
      Estou com o macOS Mojave instalado num Lenovo 305 (com um i3 5005 e uma HD 5500) porém tou com um problema.
      Sempre que o computador entra em pausa (Sleep) não consigo voltar a "acordar" (Wake).
      Alguém pode me ajudar pf?
    • By ludufre
      Installing macOS Mojave on Lenovo ThinkPad L440

       
      There are two version of this laptop:
      - 20AS = Chipset QM87, without Express Card (mine).
      - 20AT = Chipset HM86, with Express Card.
      I strong believe is the same thing...
       

      Changelog:
       
      03/13/2019 13:15h GMT-0
      - Updated info about touchpad replacement and CPU and 4G LTE modem.
       
      02/05/2019 18:47h GMT-0
      - Updated info about CPU replacement and 4G LTE modem.
       
      02/04/2019 15:24h GMT-0
      - Sometimes the VoodooHDA.kext doesn't work.
      - Added AppleHDADisabler.kext to fix that (attached bellow).
       
      01/24/2019 14:42h GMT-0
      - Added more adjustments to use of VoodooHDA.
      - Updated VoodooHDA links to 2.9.1 official (without installer).
      - Changed PCM volume from 90 to 180 in Info.plist (attached modified VoodooHDA.kext bellow)
      - Updated SSDT-L440.aml (Removed HDEF and HDAU, not needed).
      - Updated config.plist (Changed to user Audio layout to 1).
       
      01/22/2019 20:47h GMT-0
      - I gave up on the AppleALC.
      - Headset does not work.
      - Now with VoodooHDA is perfect and the sound even louder.
       
      01/22/2019 14:37h GMT-0
      - Add info about update 10.14.3. 
       
      01/22/2019 13:46h GMT-0
      - Add link to BIOS reassing guide.
       
      01/20/2019 11:49h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i5-4300M ->  Work. All SpeedStep stages.
      - Video Card: Intel HD4600 ->  Work. QE/CI and Metal.
      - Chipset: Intel QM87 ->  Work.
      - Mini DisplayPort ->  Work. But no audio, yet.
      - VGA ->  Not work. Normal.
      - Audio: ALC292 ->  Work.
      - WiFi/Bluetooth: Intel AC 7260 ->  Not work. Replaced with DW1560 (need whitelist removal).
      - Ethernet: Intel I217-LM ->  Work.
      - Card Reader: Realtek RTS5227 ->  Not work.
      - Keyboard and Touchpad ->  Work.
      - Webcam ->  Work.
      - Fingerprint Reader ->  Not work. Normal.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Extras
       
      - FullHD 1920x1080 display upgrade: 
      Replaced with AU Optronics B140HAN01.1 30pin eDP (B140HAN01.2 and B140HAN01.3 also compatible).
      Apparently same screen as Dell Latitude E6440, E7440, Lenovo Ideapad U430 and E129.
       
      - CPU upgrade:
      Replaced the stock Intel Core i5 4300M 2.6Ghz (3.3Ghz turbo) 6M cache with Intel Core i7 4700MQ 2.4Ghz (3.4Ghz turbo) 6MB.
      I initially had problems with overheating. The processor ran at full load above 90 degrees.
      After using a quality thermal paste I can work between 70 and 80 degrees.
      Acceptable taking into consideration that the new processor has 47TDP versus 37TDP which is recommended.
      I also had no problem consuming the battery while charging. The original 65W source seems to have figured out.
       
      - Touchpad upgrade:
      Replaced the stock with T460 touchpad.
      This is serious: you have to do it! It should be stock. Touchpad with precision and absurd quality!
      Just do it!
       
      - RAM upgrade:
      No mistery here. Just upgade.
       
       
      Todo
       
      - Make DP audio work.
      - Make Card Reader work.
      - Upgrade CPU to i7-4712MQ (Ordered. It's on the way) Done, but received i7-4700MQ (47w TDP, with good paste I have no overheating)
      - Replace touchpad with T460 model (Ordered. It's on the way) Done. Sensitivity and perception of quality much better. I recommend 100%!
      - Sierra Gobi5000 4G LTE modem EM7355 (Ordered. It's on the way. I hope works. ) Done, but not work. Recognize but not connect. I already gave up...
      - Upgrade to 16GB RAM Done
       
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ .app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minutes.
       


      Install bootloader

      Download the RehabMan's CloverEFI fork (used 4701) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - ApfsDriverLoader-64
      - UEFI Drivers - AptioMemoryFix64


       
       
      Make things works

      Will be created a partition named EFI and mounted in Desktop.
      - Replace the /Volumes/EFI/CLOVER/config.plist with mine attached below
                    If you have modded BIOS with Advanced Menu and enabled 128MB DRAM-prealloc use 128MB_DRAM-prealloc_config.plist.zip
                    If no, then use 32MB_DRAM-prealloc_config.plist.zip
      - Put SSDT-L440.aml attached below in /Volumes/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.3.2.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the FakeSMC.kext from here. I used the version 2018-0915.
      - Download the VoodooPS2Controller.kext from here. I used version 2018-1008.
      - Download the IntelMausiEthernet.kext from here. I used the version 2018-1031.
      - Download the Lilu.kext from here. I used the version 1.3.1.
      - Download the AppleALC.kext from here. I used the version 1.3.4.
      - Download the VoodooHDA from here. I used the version 2.9.1.
      - Download the WhateverGreen.kext from here. I used the version 1.2.6.
      - Download the AppleBacklightFixup.kext from here. I used the version 2018-1013.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the ACPIBatteryManager.kext from here. I used the version 2018-1005.
       
       
      Wifi and Bluetooth (DW1560 / BCM94352Z)
       
      Unfortunately, some notebook manufacturers are currently blocking the replacement of wireless cards. They want you to only use the models sold by them. And of course, none of them from Lenovo for this notebook model is compatible with MacOS.
       
      If you try to start with an unauthorized wifi card for them, you will receive a screen error:
      1802: Unauthorized network card is plugged in - Power off and remove the network card. Since this check is done directly in the BIOS, the only solution is to modify it.
      But since nothing is easy in this life, there is one small big problem:
      - The BIOS update procedure does not allow you to use modded files as it used to be.
      - You will need to physically reach your BIOS on the motherboard and make use of a USB BIOS reader/writer.
       
      So what you need to do:
      1. Disassembly your laptop;
      2. Dump your BIOS with an USB BIOS reader with SOIC8 clip (to not desolder from the motherboard);
      3. Patch it (In addition to removing the whitelist, add the advanced menu);
      4. Fix RSA signature;
      5. Reflash BIOS;
      6. Replace wireless card;
      7. Remount your laptop;
      8. Done.
       
      Soon, I'll provide step by step in this process. Probably until end of this week.
      In the meantime, if you need to, send me your dump that I do steps 3 and 4 for you.
      I also add the Advanced Menu so you can increase to 128MB the DRAM-prealloc.
       
      To fix a Modded BIOS to remove the 5 beeps on boot, you need this guide: https://www.insanelymac.com/forum/topic/337333-guide-fix-insyde-h2o-bios-signature-5-beeps-on-lenovo (traduzido: pt-BR)
       
       
      After replaced the wireless card. Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the AirportBrcmFixup.kext from here. I used the version 1.1.9.
      - Download the BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext from here. I used the version 2018-0505.
      - Download the BT4LEContinuityFixup.kext from here. I used the version 1.1.2.
       
       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is the latest: 1.93 (J4ET93WW) 

      - Shutdown and insert the flash drive.
      - Power on with F1 pressed to enter BIOS setup.
      - Change value: Config - Intel(R) AMT - Intel(R) AMT Control to DISABLED
      - Change value: Security - Security Chip to DISABLED
      - Change value: Security - Anti-Theft - Intel(R) AT Module Activation to DISABLED
      - Change value: Security - Anti-Theft - Computrace to DISABLED
      - Change value: Security - Secure Boot to DISABLED
      - Change value: Startup - UEFI/Legacy Boot to BOTH, Legacy First and CSM Support = Yes
      - Save & Exit Setup (F10)
       
      - Now, hold the F12
      - In the list, select your flash drive.
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press F12 again and select the flash drive.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the config.plist inside your destination disk EFI parittion with config.plist inside flash card EFI partition.

      The flash drive EFI partition is unmounted. Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 1.
       
      Last step
       
      Copy all Kexts from flash drive to /Library/Extensions, with those commands in Terminal:
      sudo cp -R /Volumes/EFI/EFI/CLOVER/kexts/Other/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!
       
       
      Updates
       
      System update 10.14.3
       
      - Updated with success;
      - Everything works perfectly after reboot;
       

       
       

       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas, @Shiki and all others members involved directly or indirectly.
       
       
       
       
       
       
      32MB_DRAM-prealloc_config.plist.zip
      128MB_DRAM-prealloc_config.plist.zip
      SSDT-L440.aml
      VoodooHDA.kext.zip
      AppleHDADisabler.kext.zip
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
          First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with Skylake patches DSDT.MaLd0n GA H110M-S2.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI --FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
          --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   -Replace Folder CLOVER Install.zip   -Install Sierra/High Sierra and boot into system!   -Install Clover and replace with my folder  CLOVER Post Install.zip   -Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edits for Skylake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer IORegistryExplorer.app.zip -Run it, post files generate in your desktop RunMe.app.zip   -DSDT bios F21 My DSDT with patches for skylake DSDT.GA Z170M-D3H F21.zip   -Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -MIKEY -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI






       
      -FakeSMC http://www.hwsensors.com/releases -Audio https://github.com/vit9696/AppleALC -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads -LAN https://github.com/Mieze/IntelMausiEthernet   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
×