Jump to content
spakk

patched kernel 10.11.x Pentium / Celeron / ATOM Kernel

14 posts in this topic

Recommended Posts

Hi guys, I need testers who have netbook with Intel Atom or Celeron Processor

I want to know, whether the kernel boots or not and If not, then upload an image with Details of what point the system gets stuck with information what bootloader do you use.

thx

10.11.6-IPCA.zip

Share this post


Link to post
Share on other sites
Advertisement

I would like to test but... My cheap tablet with ATOM Z3735G does not accept booting 64 bit efi, also if the cpu support x64 architecture.

Share this post


Link to post
Share on other sites

Share this post


Link to post
Share on other sites

I would like to test but... My cheap tablet with ATOM Z3735G does not accept booting 64 bit efi, also if the cpu support x64 architecture.

 

But Windows 10 accepted?

No, there is another reason.

Share this post


Link to post
Share on other sites

But Windows 10 accepted?

No, there is another reason.

Yes, windows 10 accepted, but only 32 bit.

 

 

Inviato dal mio iPhone utilizzando Tapatalk

Share this post


Link to post
Share on other sites

i have a Acer ES1 431 with  Celeron N3160. i have tried all kernel i can found, but all boot failed.(10.9.x, 10.10.x, 10.11.2)

is there any kernel i can try?

Share this post


Link to post
Share on other sites

i try this patched kernel 10.11.6-IPCA.zip on my acer Aspire ES1-431 with Celeron N3160.

it boot failed and reboot. before reboot it just shows cpu information.
loader: Chameleon 2.3.r2839.Enoch
Kernel Flags: -v -f ncpi=3000 kext-dev-mode=1 rootless=0
Celeron N3160 CPUID:  406C4          (Celeron N3150 CPUID: 406C3) 
 
when using origin kernel it will panic: "tsc_init: EFI not supported\n"@/Users/patryk/kernel/xnu-....../osfmk/i386/tsc.c:211
 
no luck :(

Share this post


Link to post
Share on other sites

where do i place this kernel in my el capitan installer?

By default, the kernel belongs into S/L/Kernels

 

 

test and reports

the kernels should be now OK

10.11.6-IPCA.zip

10.11.6-IPCA-1.zip

Share this post


Link to post
Share on other sites

Hi @spakk, do you have the source code for this patched kernel, or an update for 10.12 / 10.13? I am keen to continue testing and development for Cherry Trail (x5/x7) kernel support. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      Run Vanilla OS X El Capitan, Sierra, High Sierra or Mojave in VMware Workstation on a Windows Host
       
      I wanted to make a simple guide on how to create a vanilla OS X El Capitan virtual machine running on a Windows host.  The virtual machine should be useful for testing El Capitan and also for creating installers for use on a real machine/hackintosh.
       
      There are many guides and videos on the net about running OS X on Windows machines using pre-made VMWare disk images but you can never guarantee what else is in there….
       
      I’ve gathered info for this guide from various threads in the Multibooting and Virtualisation section of this forum eg
       
      Workstation 11/12, Player 7/12, Fusion 7/8 and ESXi 6 Mac OS X Unlocker 2 by @Donk How to Install OS X 10.x from Snow Leopard to El Capitan in VMware Workstation 10/12, Player 6/8 or ESXi 5/6 by @MSOK HOW TO: Create a bootable El Capitan ISO for VMware Credit and thanks to @Donk, @Albert Nietsnie and @MSOK for all their hard work in creating and testing the VMware Unlocker program.
       
      Requirements
      Intel PC with four or more CPU cores running Windows 7 X64 or later OS (2 or more cores needed for OS X) 4GB or more RAM (2GB or more will be needed for OS X) Hard Disk with at least 40GB free for Virtual Machine VMware Workstation 12 or later VMware Unlocker 2.0.7 or later Install OS X El Capitan app and Mac or Hack to prepare installation iso <-- Now, no longer necessary to have previous access to a Mac or Hack by building the Installer.app from scratch - see post#41 16GB or larger exFAT formatted USB stick to transfer El Capitan iso from Mac/Hack to Host PC Prepare Installation ISO on your Mac or Hack
      1.  On your Mac or Hack, download "Install OS X El Capitan.app" from the App Store into your Applications folder.
      2.  Unmount any attached install image/InstallESD.dmg (if currently mounted) by rebooting the system or running the hdiutil unmount command in terminal eg
       
      3.  Download and unzip the CECI.tool (attached to this post) into your ~/Downloads folder. The commands in this executable script are shown below for informational purposes….
       
       
       
      4.  Open OS X terminal, then run the following commands to execute the script:
      cd downloads chmod +x CECI.tool ./CECI.tool 5.  At the end of the process, you will have an El Capitan iso on your desktop - copy this onto an exFAT formatted USB for use on the PC Host later.
       
      Updates:
      @shela has created an ISO generating script compatible with OS X 10.6-10.12: create_osx_iso post #362.
      See post#30 for macOS_iso_cim.tool script to create ISO for macOS 10.13+ using Apple's createinstallmedia utility.
       
      Install and Patch VMware Workstation 12 on your PC
      1.  Download and install VMWare Workstation Player 12 or later
      2.  Download and extract Unlocker 2.0.7 or later to your USB stick…
      3.  Run the win-install.cmd as administrator by right clicking the file in Windows explorer or run it from an Administrative Command Prompt.
       



       
      Create an El Capitan Virtual Machine
      1.  Double click on the VMware Workstation 12 Player icon on your desktop and click “Create a New Virtual Machine”.  Choose “I will install the operating system later” at the How will you install screen….
       

      2.  Select Apple Mac OS X as the Guest operating system and OS X 10.11 as the version.  By default, an OS X 10.11 folder will be created in your Documents\Virtual Machines folder.
       


      3.  Under Specify Disk Capacity, you can leave the default 40GB or set a larger value.  I personally store the virtual disk as a single file.  Click Finish and you will see OS X 10.11 on the Main Screen of Workstation 12.
       


      4.  Next, we need to edit the virtual machine settings to map the virtual SATA CD/DVD drive to the El Capitan installation iso we created earlier.
       


       
      5.  To prevent the virtual machine from crashing in Windows, the virtualHW.version set in the vmx configuration file needs to be changed from 12 to 10 (alternatively, the line smc.version = "0" can be added to the file).  The OS X 10.11.vmx file can be edited with the WordPad program (navigate to the OS X 10.11 virtual machine folder with Windows Explorer and right click on the file to open in WordPad).
       


       
      6.  For HW10, set USB compatibility to USB 2.0, otherwise your mouse and keyboard might not work in the virtual machine.
       

      7.  Finally click “Play virtual machine”
       

      Installation of El Capitan
      Installation should be relatively straight forward, just following the prompts of the OS X installer:
      1.  Select language, agree to legal terms
       

      2.  Use Disk Utility from the Utilities Menu to erase and format the virtual hard drive as a single partition GUID Mac OS X Extended.  I’ve named the drive Macintosh HD but you can enter whatever you like eg El_Capitan.
       



      3.  Quit DU and choose Macintosh HD to install El Capitan on.
       

      4.  After 20-30 min (depending on how fast your system is), the installation will complete and the VM will automatically reboot…
       

      5.  At the welcome screen, choose your country and keyboard layout.  You can skip transfer information, location services and logging in with your Apple ID if you wish…
       


      6.  Create a User Account and select your Time Zone.  You can skip sending diagnostics and usage data to Apple….
       


      7.  Finally, you will arrive at the El Capitan Desktop.  You should eject the Installation iso now by right clicking and selecting “Eject OS X Base System”.  This will allow you to install VMware Tools….
       



      8.  After rebooting, the VM can now be resized or run at full screen resolution.  Audio and network/internet should also work OOB.
       

       
      SMBIOS Customization and iMessage Vars
      To make the Virtual Machine more "Mac like", you can edit the vmx file to add unique identifiers from a real Mac's SMBIOS -
      eg for an iMac 11,3 SMBIOS, you can enter the following lines....
      smbios.reflectHost = "FALSE" board-id.reflectHost = "FALSE" board-id = "Mac-F2238BAE" hw.model.reflectHost = "FALSE" hw.model = "iMac11,3" serialNumber.reflectHost = "FALSE" serialNumber = "W80#######6" Refer How to spoof real Mac in VMware - Multi-booting and Virtualisation.
       
      The critical variables for iMessage/Facetime activation are MLB & ROM.  By default, VMware "reflects" the host's MLB and ROM since it assumes you are running the OSX guest on a real Mac host - see post#42 by @Donk.
       
      If the host is a Windows PC, the following lines need to be added to the vmx file (requires virtualHW.version 12 and smc.version = "0")....
      efi.nvram.var.ROM.reflectHost = "FALSE" efi.nvram.var.MLB.reflectHost = "FALSE" system-id.enable = "TRUE" and the MLB, ROM and optionally system-id entered manually eg
      efi.nvram.var.MLB = "W80######BA1A" (MLB can be 13 or 17 characters long, alphanumeric string) efi.nvram.var.ROM = "<=>?@A" (ROM is entered here as a 6 character ASCII string) uuid.bios = "## ## ## ## ## ## ## ##-## ## ## ## ## ## ## ##" <---Optional (if you want to inject a given system-id hexadecimal value) Note the output for ROM from imessage_debug is a 12 character hexadecimal that needs to be entered here as a 6 character ASCII string eg using an Hex to ASCII converter we find that "3c3d3e3f4041" hex is equivalent to   "<=>?@A".
       
      Vanilla Mavericks and Yosemite
      The same VM settings for El Capitan will also boot and run vanilla installations of OS X Mavericks and Yosemite .  Attached to this post are installer scripts to create bootable Mavericks (CMI.tool) and Yosemite (CYI.tool) ISOs for VirtualBox and VMware.
       
      With the respective OS X installer apps in the Applications folder, download and run the installer tools using terminal ie
       
      To create a Mavericks ISO on your desktop
      cd downloads chmod +x CMI.tool ./CMI.tool To create a Yosemite ISO on your desktop
      cd downloads chmod +x CYI.tool ./CYI.tool Here is a screenshot of the VM running Mavericks 10.9.5...
       

       
      Enjoy
       
      Update for macOS 10.12 Sierra
      The above settings still work for macOS Sierra after upgrading to VMware Workstation 12.5 and unlocker 2.0.8 - see post #13.
       
      Update for macOS 10.13 High Sierra and 10.14 Mojave
      See post#30 for macOS_iso_cim.tool script to create ISO for macOS using Apple's createinstallmedia utility.
      Post#41 describes how to build "Install macOS ******.app" on the fly from installer files downloaded beforehand in /SharedSupport folder.
       
       
      CECI.zip
      CYI.tool.zip
      CMI.tool.zip
    • By fusion71au
      Run Vanilla OS X El Capitan, Sierra, High Sierra or Mojave in VirtualBox 5.x.x on a Windows Host
      Following on from my previous guide on how to create a VMware virtual machine running Vanilla OS X El Capitan in Windows, I’ve decided to write a similar guide for creating a VirtualBox El Capitan VM. 
       
      The virtual machine should be useful for testing El Capitan and also for creating installers for use on a real machine/hackintosh.
       
      There are other tutorials and videos on the net about running OS X on Windows machines using pre-made VMDK disk images but you can never guarantee what else is in there….
       
      I’ve gathered info for this guide from several threads in the Multibooting and Virtualisation section of this forum and also the wider internet eg
       
      @colt2 HOW TO: Create a bootable El Capitan ISO for VMware
      @dsmccombs comment on faking Ivybridge Processor
      @E:V:A http://forum.xda-developers.com/showpost.php?p=55572430&postcount=6
      @Tech Reviews video tutorial https://www.youtube.com/watch?v=t7X07U63lwg.
      VirtualBox Forum: Status of OSX on OSX
       
      Requirements
         Intel PC with four or more CPU cores running Windows 7 X64 or later OS (2 or more cores needed for OS X)    4GB or more RAM (2GB or more will be needed for OS X)    Hard Disk with at least 40GB free for Virtual Machine    Oracle VM VirtualBox v 5.0.34    Install OS X El Capitan app and Mac or Hack to prepare installation iso <-- Now, no longer necessary to have previous access to a Mac or Hack by building the Installer.app from scratch - see post#75    16GB or larger exFAT formatted USB stick to transfer El Capitan iso from Mac/Hack to Host PC  
      Prepare Installation ISO on your Mac or Hack
      1.  On your Mac or Hack, download "Install OS X El Capitan.app" from the App Store into your Applications folder.
      2.  Download and unzip the CECI.tool (attached to this post) into your ~/Downloads folder. The commands in this executable script are shown below for informational purposes.  Note: you will need approx 16GB of free space on your hard disk for the script to complete.
       
       
       
      3.  Open OS X terminal, then run the following commands to execute the script:
      cd downloads chmod +x CECI.tool ./CECI.tool 4.  At the end of the process, you will have an El Capitan iso on your desktop - copy this onto an exFAT formatted USB for use on the PC Host later.
       
       
      Create an El Capitan Virtual Machine in VirtualBox
      1.  Open the VirtualBox program and click the "New" button to create a new VM.
       

       
      2.  Select Mac OS X and Mac OS X 10.11 El Capitan (64 -bit) for Operating System type and version.  I named my Virtual Machine "El_Capitan", then clicked next...
       

       
      3.  Leave the Memory size at the recommended 2048 MB, then click next.
       

       
      4.  Choose to "Create a virtual hard disk now", then click the create button.
       

       
      5.  For the hard disk file type, the default is VDI (VirtualBox Disk Image) but I have selected VMDK for inter-operability with VMWare.  Click next...
       

       
      6.  For Storage on physical hard disk, I have chosen the default Dynamically allocated (grows larger to a set limit as you need more disk space).
       

       
      7.  On the File location and size screen, you can set the location of the new virtual hard disk and its size - I recommend changing disk size to 40GB or larger.  When you click the create button, you will now see your new VM in the VirtualBox main GUI.
       

       
      8.  Click the settings button on the Main Menu to tweak a few settings....
         a.  On the System/Motherboard tab in Boot Order, you can uncheck the Floppy Drive (who has these now?)
       

       
         b.  On the System/Processor tab, you can increase the allocated CPU cores to 2
       

       
         c.  On the Display tab, you can increase the allocated Video Memory to 128MB
       

       
         d.  On the Storage tab, click on the icon of the Optical Drive and select "Choose Virtual Optical Disk File". 
       

       
      Navigate and select the El Capitan ISO we created earlier...
       

       
         e.  Click the OK button to finalise the VM settings.
       
       
      Patch El Capitan vbox configuration file with DMI Settings from a Mac
      1.  From the start menu, type cmd and click run as administrator to open an administrative command prompt. 
       

       
      2.  Choose a Mac Model similar to your host system, then type the following lines, followed by <enter>  after each line.  Make sure you first close all VirtualBox Windows and the VirtualBox program, otherwise any changes you make won't stick...
       
      Eg iMac11,3
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "iMac11,3" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-F2238BAE" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 MacBookPro11,3
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "MacBookPro11,3" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-2BD1B31983FE1663" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 Macmini6,2
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "Macmini6,2" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-F65AE981FFA204ED" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 3.  Optional- For some host systems eg those with Haswell and newer CPUs, you might have to spoof an older CPU to avoid VirtualBox errors.  You can try from one of the following if this happens:

      To spoof Lynnfield i5 750 CPU
      VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000106e5 06100800 0098e3fd bfebfbff To spoof IvyBridge CPU
      VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000306a9 04100800 7fbae3ff bfebfbff or
      VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000306a9 00020800 80000201 178bfbff 4.  Close the command prompt window.
       
       
      Installation of El Capitan
      We are now ready to start the El_Capitan Virtual Machine....
       



       
      Installation should be relatively straight forward, just following the prompts of the OS X installer:
      1.  Select language, agree to legal terms
       

       
      2.  Use Disk Utility from the Utilities Menu to erase and format the virtual hard drive as a single partition GUID Mac OS X Extended.  I named my drive "Macintosh HD" but you can enter whatever you like eg El_Capitan.
       

       
      3.  Quit DU and choose Macintosh HD to install El Capitan on.
      4.  After 20-30 min (depending on how fast your system is), the installation will complete.  At this point, unmount the El Capitan ISO by clicking the Devices menu from the VM window, click Optical Drives, then choose Remove disk from virtual drive.  The VM is now ready to reboot into OS X from the virtual hard drive.
      5.  At the welcome screen, choose your country and keyboard layout.  You can skip transfer information, location services and logging in with your Apple ID if you wish…
      6.  Create a User Account and select your Time Zone.  You can skip sending diagnostics and usage data to Apple….
      7.  Finally, you will arrive at the El Capitan Desktop.
       

       
      8.  Network/internet and audio should work OOB but on my system, the sounds were distorted.  Unfortunately, there is no QE/CI and the VM resolution will be fixed without the ability to dynamically resize the VM window (no VirtualBox additions for OS X guests atm). 
       
       
      Customization with VBoxManage
      1.  You can change the default resolution of 1024*768 (after shutting down the VM) with the VBoxManage command from the Windows Administrative Command Prompt:
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" VBoxInternal2/EfiGopMode N (Where N can be one of 0,1,2,3,4,5) referring to the 640x480, 800x600, 1024x768, 1280x1024, 1440x900, 1920x1200 screen resolution respectively.
       
      Update:  For VirtualBox 5.2.x, the command for changing screen resolution has changed...
       
      VBoxManage setextradata "<MyVM>" VBoxInternal2/EfiGraphicsResolution XxY (where X=Horizontal screen resolution, Y=Vertical screen resolution)
      eg
      VBoxManage setextradata "<MyVM>" VBoxInternal2/EfiGraphicsResolution 1280x1024 2.  Adding serials and other SMBIOS details for the System Information Screen
      VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemSerial" "W8#######B6" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardSerial" "W8#########1A" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVendor" "Apple Inc." VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemFamily" "iMac" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBIOSVersion" "IM112.0057.03B" A listing of known issues with Mac OS X guests can be found in the VirtualBox Manual - link https://www.virtualbox.org/manual/ch14.html.
       
      Vanilla Mavericks and Yosemite, Snow Leopard from Retail DVD
      The same VM settings for El Capitan will also boot and run vanilla installations of OS X Mavericks and Yosemite .  Attached to this post are installer scripts to create bootable Mavericks (CMI.tool) and Yosemite (CYI.tool) ISOs for VirtualBox and VMware.
       
      With the respective OS X installer apps in the Applications folder, download and run the installer tools using terminal ie
       
      To create a Mavericks ISO on your desktop
      cd downloads chmod +x CMI.tool ./CMI.tool To create a Yosemite ISO on your desktop
      cd downloads chmod +x CYI.tool ./CYI.tool Here is a screenshot of the VM running Mavericks 10.9.5...
       

       
      Finally, those without a Mac/Hack to prepare the install media can purchase a retail Snow Leopard DVD directly from Apple and install OSX 10.6.3 on their virtual machines (Snow Leopard, Lion and Mountain Lion run quite happily in VirtualBox with 1 CPU, 1-2 GB of RAM and the rest of the settings unchanged from above).  Once you update by combo update to SL 10.6.8, you can directly download El Capitan from the App Store for free .
       

       
      UPDATE macOS Sierra 10.12 to 10.12.6: For macOS Sierra, use CSI.tool in post#51.
      UPDATE macOS High Sierra 17A365:  For macOS High Sierra, use CHSI.tool in post#73.
      UPDATE macOS Mojave 18A391:  For macOS Mojave or High Sierra, use macOS_iso_creator.tool on page 4 of thread.
       
      Good luck and enjoy
      CECI.tool.zip
      CYI.tool.zip
      CMI.tool.zip
    • By fusion71au
      This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.

      It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
       
       
      Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.

      Prerequisites
      Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”  
      Procedure
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Open OS X terminal and type the following lines, followed by <Enter> after each line.
          The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
       
      sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg  -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3.  Right click on the “OS X Base System” Volume and click “Get Info”
       

      4.  Click on the lock icon and untick “Ignore ownership on this volume”
       

      5.  Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist.  NB It is found in the "Essentials.pkg" in /System/Installation/Packages
       

      6.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
       

      7.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
       

      8.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
       
      sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.


      9. Install your Bootloader targeting the OS X Base System volume
       
       
       
       
      10.  Boot your system with the USB without injected kexts into the OS X Installer GUI....
       
       
       
       
       
      Post Install
      The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts.  In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
       
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
      3.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
      4.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel.  In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
      sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume.  This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
      6. Reboot your system without injected kexts into El Capitan!
       
       
      Other links
      The All-In-One Guide to Vanilla OS X for beginners
       
      Updates for Sierra and High Sierra   Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:   1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.   2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem  4.  Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.       macOS High Sierra bypass Firmware and MBR checks in post#13.
      BaseSystem_PLK.tool_ElCap.zip
      BaseSystem_PLK.tool_Sierra.zip
      BaseSystem_PLK.tool_Mojave.zip (need to run in Mojave to avoid dependency errors)
       
    • By fusion71au
      Clover r4644 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 14 running OSX 10.9 -->10.14 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4644 for VMware.zip". Mount Clover-v2.4k-4644-X64 by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By fantomas1
      hi people  
       
      you can use this thread to link / talk about of the future Nvidia Web Driver updates for El Capitan
       
      10.11.6
      Nvidia Web Driver - 346.03.15f16 --> build 15G22010 (thanks to BreBo)  New!
      Nvidia Web Driver - 346.03.15f15 --> build 15G21013 (thanks to BreBo) 
      Nvidia Web Driver - 346.03.15f14 --> build 15G20015 (thanks to DMCrimson)
      Nvidia Web Driver - 346.03.15f13 --> build 15G20015 (thanks to Louvier)
      Nvidia Web Driver - 346.03.15f12 --> build 15G19009 (thanks to WeBeRiO)
      Nvidia Web Driver - 346.03.15f11 --> build 15G18013 (thanks to BreBo)
      Nvidia Web Driver - 346.03.15f10 --> build 15G17023 (thanks to Badruzeus)
      Nvidia Web Driver - 346.03.15f09 --> build 15G1611 (thanks to Badruzeus)
      Nvidia Web Driver - 346.03.15f08 --> build 15G1510 (thanks to Badruzeus)
      Nvidia Web Driver - 346.03.15f07 --> build 15G1421 (thanks to bb1045)
      Nvidia Web Driver - 346.03.15f06 --> build 15G1217 (thanks to bb1045)
      Nvidia Web Driver - 346.03.15f05 --> build 15G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 346.03.15f04 --> build 15G1108 (see this post)
      Nvidia Web Driver - 346.03.15f03 --> build 15G1004 (thanks to BreBo)
      Nvidia Web Driver - 346.03.15f02 --> build 15G31 (thanks to Moviemakergr)
      Nvidia Web Driver - 346.03.15f01 --> build 15G31 (thanks to WeBeRiO)
      [uPDATE_3]Nvidia Web Driver - 346.03.15b01 --> build 15G24b (thanks to DMCrimson)
       
      10.11.5
      Nvidia Web Driver - 346.03.10f02 --> build 15F34 (thanks to marcozardi)
      Nvidia Web Driver - 346.03.10f01 --> build 15F34 (thanks to WeBeRiO)
      [uPDATE_2] Nvidia Web Driver - 346.03.10b01 --> build 15F31a (see this post)
       
      10.11.4
      Nvidia Web Driver - 346.03.06f01 --> build 15E65 (see this post)
      Nvidia Web Driver - 346.03.06b01 --> build 15E (see this post)
       
      10.11.3
      Nvidia Web Driver - 346.03.05f02 --> second release for build 15D21 (thanks to Fljagd)
      Nvidia Web Driver - 346.03.05f01  --> build 15D21 (see this post)
      Nvidia Web Driver - 346.03.05b02 --> build 15D (see this post)
       
      10.11.2
      Nvidia Web Driver - 346.03.04f02 --> second public release (see this post)
      Nvidia Web Driver - 346.03.04f01 --> build 15C50 (see this post)  
      Nvidia Web Driver - 346.03.04b02 --> build 15C48a (see this post) 
      Nvidia Web Driver - 346.03.04b01 --> build 15C47a (see this post)
       
      10.11.1
      Nvidia Web Driver - 346.03.03f02 --> second public release (see this post) 
      Nvidia Web Driver - 346.03.03f01 --> build 15B42 (thanks to jperkins909)
       
      10.11.0
      Nvidia Web Driver - 346.03.02f02 --> build 15A284 (thanks to MTWomg)
      Nvidia Web Driver - 346.03.02f01 --> build 15A284 (see this post)
       
      DP
      Nvidia Web Driver - 346.03.01b07 --> GM/DB/PB6/DB7/PB5 (thanks to BreBo) 
      Nvidia Web Driver - 346.03.01b06 --> build 15A (thanks to MTWomg) 
×