I'm at my wit's end. I really need a hand here.
I found only one clover setup for my motherboard, and works absolutely flawlessly for Mojave.
Today I added an Asus Thunderbolt EX3 card, and that won't even let me boot my Mojave installation.
My config.plist in attachment. Let's solve at least the Thunderbolt issue for now.
There are also other issues, but let's solve this one first.
Asus WS Z390 PRO + i9 9900K
Nvidia 2080Ti for Windows and AMD RX480 for MacOS.
Samsung NVME 950PRO
By Ragimund (HP Z820)
Noob here asking Help or Hints,
trying to build my first Hackintosh from HP Z820. Almost done...
Read Z820 Sierra & High Sierra Z820 installation guides in this forum - following them I managed to create a Booting Mojave install USB and successful
installation of Mojave 10.14.6 in to SSD. Via Clover Boot view I can choose Mojave SSD and it boots Ok, logging in Ok.
Everything "looks" to work Ok.
-CPU recognised Ok.
-SSD & HDU Ok.
-GPU Radeon RX580, 2 x DP in use.
-Dual displays Ok (Full HD, no internal speakers)
-Wired LAN working (2 Wired LAN RJ-45 connectors, using the one without text label "AMT" (?))
-No Wifi (no dongle)
-Audio working: line out & headphones, airplay (ALC262, injected 28) Ok.
-Bluetooth dongle (Ebay) in USB2.0 port Ok (paired BT Speaker, Keyboard and Mouse).
-Front: 1 x USB2.0, 2 x USB3.0 (all as USB2.0 mode, I think).
-Back: 4 x USB2.0, 2 x USB3.0 (all as USB2.0 mode, I think).
-Back: Firewire OK/NOK ? Don't own any fw device at the moment, how to test, not important now.
Not yet signed to any Apple service, iCloud, etc. Not yet installed any other software except Clover 5098 and Hackintools 2.8.6
System Preferences is showing Update, Mojave 2019-001 (1.55GB). Safari was updated Ok with another smaller update.
I try to install the Mojave Update. It downloads it Ok, warns about needed Restart and after accept it starts to install it.
Apple logo visible, progress bar visible, text "Installing Software Update" visible. Progress bar shows a minor progress - stays almost in the beginning...
and Wham! - Rebooting
Logging in Ok, System Update window pops open and offers the same update again...
Have read plenty of articles from different Forums (sorry, I'm desperate, Noob) and I have a feeling that it relates to my Z820 USB's (maybe??).
HP Z820 uses "Texas Instruments USB3.0 xHCI Host Controller" - NOT Intel like Apple. That's why All my USB are in "usb2.0 mode" (??).
I installed the system with SSD/HDU cables in factory settings (in SAS/SATA connectors. AstekFusion2Adapter & AstekFusion2Family kexts), worked fine.
I changed the SSD/HDU cables to different connectors (ACHI 0 / 1) like in Z820 High Sierra guide later and Booted Ok. Tried Update, FAIL.
Have no idea what's wrong or what's causing this - like I said, I'm a Noob and trying to build my first Hackintosh...
Can anyone Help Noob ?
THE GREAT GUIDE
HIGH SIERRA + Z820
(from El Capitan's guide)
(from Sierra's guide)
Again, a new guide version, updated to High Sierra. I hope it will be useful for you all. This time, the update is easy. Basically, the 100% of Sierra’s guide is still valid for High Sierra. The guide has been updated to update links, kexts versions … etc, and some parts try to be more clear. Just there are some important topic to keep in mind:
1. What's new?.
There is a new and absolute important setting to install High Sierra. We have to activate “legacy ACPI cpu tables” in Advanced Section, in BIOS. Without this option enabled, we will get a KP.
This option changes completely the structure of the SSDT needed for PM. We have to get rid old SSDT versions, if you extracted them with this option disabled. And all SSDT generated by ssdtPRGen, too. And, if your DSDT has the “SSDT-1-CpuDef” code injected, (following my previous guides, to skip "No ACPI Processor declarations found in the DSDT!" error, (see PM section) ) you will have to delete that part, because the DSDT will cause a KP. A better method is described in this guide. No need of add strange code into DSDT.
2.Can I use my old files from Sierra´s EFI folder?
The most important, yes. You can keep your config.plist and your DSDT(see point N.1) … saving tons of time. You have to use the new drivers64Uefi files installed by new clover version, and update the kexts versions of main kexts. The specific kexts for our dear machine, USB3, Astek driver, remains in same version.Of course, I provide of all links and files (into my stuff folder) in this guide.
3. So, do I Need repeat again every step of this guide?.
If you comes from Sierra´s guide, no. After 1stboot and graphics divers install, you can use your previous files (see point 1.) reboot and jump directly to PM section.
For new users, Yes, sure.
4. Consider any part of this guide open to discuss.
If you see something wrong, or which could be improved, please, just say it, and I’ll fix it. English is not my native language. If you can’t understand some step, or something could be best written, please, just say it and I’ll fix it too
FOR 26x7 and 26x3 USERS!!!. Finally, there a Fix to this models. It´s under test, but I think it should work. Check out FIRST the last section of this guide.
5. And please, (this is for "anonymous" users) don't PM me with personalquestions. No need for that.Any question can be answered openly.
Ok, let’s go.
This guide is for UEFI systems. This is not important to follow this guide except in Clover installation section. Keep in mind it to adapt some settings if you need use legacy-bios mode.
If you don’t need any special option, and you have been playing with options, reset the bios to default settings.Later, you will be able to change and test, if you need some specific option. The next section describe the essential options.
6. The main BIOS options are:
set ACHI mode (IMPORTANT).
Set boot order. UEFI first, (for me), USB first and HD second.
Device Security: I like disable unused devices (scu controller and serial port). Optional.
Disable Vt-d: Disabled. IMPORTANT.
Secure boot. Disabled (...to boot with non signed OS).
I use UEFI boot, but I keep legacy support active. This is optional.
In Power :
Set Runtimepower management to Enabled. This option will allow Power Management later. About the rest of options, I’m not sure of the impact in performance. Set them by default by the moment. Not important for the guide. Only remeber for further tests that with Pcie Performance Mode enabled, power boost is disabled. Idle Power Savings manage sleep policies.
Set PXE, Storage and Video to EFI. (for me) , or legacy, as your want. If you have a graphic card non EFI-compliant, you can set video in Legacy, keeping an UEFI boot.
Don’t forget set thunderbolt policy in Legacy mode.
And Now, the essential setting for High Sierra:
-Enable “Legacy ACPI CPU Tables”
7- MEDIA CREATION
(This guide assume you have a MacOs running. I have no idea how do it on PC)
-Important: Download HighSierra dmg only from Apple.Don´t use suspicious dmgs or Isos. It’s not longer available to search in Apple Store, since Mojave release. Go to this link, and click in “Get macOS high Sierra” (at mid of the page). It will open the apple store download link. The dmg is downloaded in /Applications folder. Let the file in Applications folder. (and keep one compressed copy for future attempts)
-Format one USB stick with common settings:
Go to erase tab, select GUID partition table in options, and Mac Os Extended (Journaled) as Filesystem. Name the partition as “USB”. Ok to Apply.
On a terminal window, type (copy and paste) :
sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ High\ Sierra.app --nointeraction
Enter and type your admin password. It will take 10-15 minutes. (When it finish, you’ll see the prompt again)
8. INSTALLING CLOVER.
-Download Clover from here. Version used to make this guide: Clover_v2.4k_r4658.
-Download Clover Configurator from here. It makes easier edit config.plist file and we can use a lot of clover features easily. Now there is a “global edition”
-Download plisteditor pro demo for edit info.plist files.
-Download my High Sierra stuff folder. (at the end of the guide)
-Additional tools: One tool for install kexts, fix permission and rebuild cache. I use Kext helper from rampage’s dmg, although I need always force quit. I don´t like the rest of utilities. This is a personal option. Also you can download EFI mounter (from download sections of this site). CloverConfigurator mounts EFI too, but maybe with this utility is easier.
-Install Clover in the USB. On first screen, don’t forget change the install location in order to do not install on your Internal HD. Select your USB stick.
Click on Customize. Choose “Install for UEFI booting only” and “Install Clover in the ESP” as main options (if your system is UEFI-based) This is optional: choose your favorite Theme. In Drivers64UEFI select: Now is longer section. It´s only because is more exact showing the drivers installed. We have to keep selected the default options and add the same additional drivers. Keep in mind two important things: -There is a new driver, APFS driver, for the “new” filesystem. This driver is now essential, in order to allow clover “see” HDs formatted with this FS. It´s activated by default.
-The OSxAptiopnFix2Drv has a new version, v3.
... The conclusion of this long explanation, is that we have to add to the default selection of drivers:
Let the rest of option unselected and Click on Install.
9- CONFIGURE CLOVER
When clover finishes, it will mount EFI partition. Time to modify it. You’ll find all necessary files in my folder. There are three things to modify: config.plist, drivers, and kexts
The default config.plist is not useful for us. Replace it by mine (folder n.2)
But take a look to options (with clover configurator) to understand my options in order to be able to adapt them for your specs or your preferences. It’s a basic config.plist. I could add more options or fixes. but is a good idea install with minimum options.
All fixes in ACPI section has been removed except some minor fixes in 2 subsection, smart ups option, etc. SmartUps it’s not important now, but it will be later. So I prefer activate this option.
The most important, The rename usb devices patches are included.
Bootflags needed are only -v and npci=0x2000. Of course -v is optional only to see the boot process. You can deactivate it when you finish.
Any option activated in Boot Graphics/ Cpu/Device/Disable driver
Gui options. These are only personal preferences.
Graphics. AnyGraphic injection annd any option activated. At least, no needed for my 1080ti card. Check it out for your card video.
An essential section. Kernels Patches needed.
RT Variables. BooterConfig, and Csr to deactivate security policy in Sierra. The info values are taken from smbios.
SMBIOS. Set it to Mac Pro 6,1.
IMPORTANT—>press “generate new” repeatedly to get one random fresh serial number
9.2 -Drivers64UEFI folder.
As usual, delete VBoxHfs-64driver and replace it by HFSPlus.efi. (from my folder).
9.3 Kexts folder:
Add my Kexts from my stuff to /EFI/CLOVER/Kexts/10.13
These are the versions Updated since Sierra´s guide.
FakeSMC.kext. If you remember, I have some unexpected KP due to fake smc sensors. Well, I have searched a bit about this, and testing. The main topic is keep the fake smc version and sensors kext of same version or branch. There are several branchs developing different versions (slice, rehabman, kozleck, etc), after test, and test, I think the most stables and those which gives me best sensor readings is kozeck version. I attach the v1440 from kozleck. In this step I only use FakeSMC kext, withput sensors kexts. Anyway, if you have a better version, use it. Just, don´t forget no use the sensors Kexts.
VoodooTSCync.kext, to avoid boot with -x (from rampagdev, dual cpu dmg). You’ll find several versions into my folder.I haven’t noticed any change using the generic or the specific version. I think that is not important for our platform. The customize method is:
Anyway, I provided the generic version and customized versions for every cpu.
IntelMausiEthernet.kext . Kext for the ethernet card from rehabman. (2018-0424version). It will allow have internet connection on first boot. AppleIntelE1000e.kext. Kext for ethernet card from here (2017-10-18 version). (Change of server if you have problems downloading) <<<< update. Use this better than IntelMausiEthernet.kext
UsbInjectall, for USB2 from rehabman( 2018-0822version)
And add to /EFI/CLOVER/Kexts/others
Lilu kext (from here, 1.2.7version) NOTE: The kext for download is available in " LILU-X.X.X-RELEASE.zip" link
WhateverGreen.kext (from here, 1.2.2 version) old NvidiaGraphicsFixup proyect has been integrated into this proyect. It's useful for nvidia and amd graphics cards. NOTE: The kext for download is available in " WhateverGreen-X.X.X-RELEASE.zip" link
This couple of kexts avoid black screen booting with 6,1 smbios. Is quite important keep in mind the versions of these kexts keeping the right versions among this kexts. Prior to update some of them, you have to check in original websites if it's is compatible with the rest. These versions are ready to work with 10.13.6.
Thats all. We have our usb installer ready. Copy in a folder all stuff necessary to repeat the process and copy it to the USB stick. You will have it available after first boot.
Reboot from the USB stick and install High Sierra.
-Use only USB2 ports, preferably the front USB2 port.
-Don’t use USB hubs, or cable extenders… (personal issues)
-Unplug any other usb device
-Be sure that you have plugged your internal sata drive to one of the two internal achi sata controller.
-The boot process may be slow, (and with terrible and apocalyptic errors). Be patient
-Maybe, the boot stucks with the error “consideredRebuildKernel …. blabla”. Just reboot again.
-If you have two monitors, shutdown one can help with graphical errors.
-Plug your graphic card in PCI Slot 2.
-For inexperienced users: On first screen, go to disk utility and erase the Volume. (APFS and GPT). Quit the utility and return to first screen. Choose Install.
-The process is splitted in two steps. The first step promises take only 4 or 5minutes … and now, it’s true!!!. It will take4 or 5 minutes(with a SSD).
-After this first reboot, in clover boot screen, you will see more partitions than expected. APFS file system manage more partitions in a more complex way (physical layer, logical layer… bla, bla). Select the new internal HighSierra boot installer partition, not the usb installer. It will finish the process. This step, takes 10-15min aprox (using a SSD).
Note.I had some unexpected reboot in this step. Only re-trying if you have it also.
-To boot again after installation, keep booting from USB , ant then choose internal HD as clover boot screen.
11. Optional updates.
Finally, we are on High Sierra's Dektop. The Mac os Version is 17G65. In the date of this guide (oct/2018) is the last version. (there is an optional update only for real macbook laptops). For future security updates, this is the moment to update. Set up the internet options and update the system, but remember check if the Lilu and whatevergreen kexts are compatible or if you need use a new version, or you will geta KP or a black screen on boot. Update using the update app, reboot, and wait for the update installation.
12- Install Clover.
On first reboot, install clover again on HDD, repeating same process and same options than with the USB installer, but keep in mind you have to add some options on clover’s screen install:
-Install RC scripts on target volume
-Optional RC scripts
-Install Clover Preference Panel.
…and install clovermanager.app. This is optional but it’s the best way to manage the themes and find a good theme. I provide of one nice High Sierra Theme and the Bootcamp theme. Of course, left this for later.
Install clover and add same files used on the USB: config.plist , hfsplus driver and kexts. Reboot. You can now extract the USB installer and reboot from the internal HDD.
After boot, go to clover preference panel and set it to auto mount EFI partition. It will be useful along this process. Disable this when you finish and you get stable your system.
Hi there y' all.
I'm selling my hp z820 with the specs listed below since i accidentally bought me another one (that's what i told to my wife anyway).
The machine runs flawlessly High High Sierra 10.13.6 and also has Win7 pro and Win10 pro licences tied to the machine.
The machine is in Athens Greece
I'm asking for 850 euros shipped within the European Union.
Features • Make: HP • Modell: Workstation Z820 • Processor: 2x Intel XEON Quad-Core E5-2670 • Chipset: Intel C602 • Memory: 64 GB ECC RAM • Sound: Realtek ALC262 • Graphics Card: nVidia Quadro K600 • SAS - Controller: LSI SAS2308 with RAID (0, 1, 5, 10) • SSD - 256 GB • DVD RW • 2x Ethernet-LAN (RJ-45): 2 (Dual Gigabit - 1000Mbit/s) • FireWire: 2x (1x Front + 1x Back) • USB 2.0: 5x (1x Front + 4x Back) • USB 3.0: 4x (2x Front + 2x Back) • PS/2 • serial RS232 • Line-In • Line-Out • Microphone • FireWire (6polig) • PSU: 1125 Watt • (WxHxD): 203mm x 444mm x 525mm • Weight: 21,1kg The machine is configured to also run MacOS 10.13.6 High Sierra without any hiccups and complete working power management. Geekbench 4 64-bit MacOs Results
Geekbench 4 64-bit Win10 Results
The pictured drive trays are not included - the original placeholders will be mounted!
Just recently installed Mojave on my yoga 730(i5-8250u, 8gb of ram and 1080p 13.3" touchscreen) and got many features working, now the only issues are that my igpu is shown as only 7mb(and not metal capable, not sure whether it is or not) even tho I should've changed it from 5917 to 5916 (added both EFI folder and send me), the screen is shown as a 30.5" in system information and the cpu even tho I extracted the ssdt for it with ssdtPRGen.sh and appleintelinfo.kext to get low frequency info (ssdt was done with info 15,400,1600,3400 so it should go between 16-3400mhz and down to 400 in idle), idk what is wrong with my installation, can you guys help me or linke me something to fix those issues?
Ps thunderbolt shows as no device found, is it regular for hackintoshes to be that way or do I need something for that too? Laptop has 2 tb3 ports as x4 pcie 3
Send me Angeloss-MacBook-Pro.zip