Jump to content

444 posts in this topic

Recommended Posts

On 12/9/2019 at 1:37 PM, Slice said:

Make node 26 to be in group 3

0x99130130

and Headphone node 27 0x0221403f

It is more common when Speaker+Headphone are in one group and Line-out is in another group

then Lineout node 20 to be 0x01014010

thanks, it helped :thumbsup_anim:

Share this post


Link to post
Share on other sites
Advertisement

Hello Slice , how are you ?

 

It seems strange to me that on the asus p5q pro turbo, the vodoohda does not make my audio work, I did an audio dump via clover with F8 ... I also used the disablerHda, but it doesn't work, can you see the dump ??

misc.zip

Share this post


Link to post
Share on other sites

Hi Slice. Thanks for your work. VoodooHDA might be the easiest way to get sounds in Hackintosk.

 

But I got some troubles in my laptop.
My laptop have "Beats Audio quad speakers and two subwoofers" according to HP website.
I want to make all the speakers works.

 

The inner speaker nodes are:
Node 13 bottom speakers
Node 15 upper speakers
Node 16 subwoofers

 

The Codec is IDT 92HD91BXX.

The VoodooHDA version is 2.9.2.


1st try:
Remove all NodesToPatch
Sound panel shows 1 device. (It's Node 13. It works)

 

2nd try:
Patch Node 15
Sound panel shows 2 devices. (They are Node 13 and 15. Both works)
<key>NodesToPatch</key>
<array>
    <dict>
        <key>Codec</key>
        <integer>0</integer>
        <key>Config</key>
        <string>0x92180150</string>
        <key>Node</key>
        <integer>15</integer>
    </dict>
</array>

 

3rd try:
Patch Node 16
Sound panel shows 2 devices. (They are Node 13 and 16. Both works)
<key>NodesToPatch</key>
<array>
    <dict>
        <key>Codec</key>
        <integer>0</integer>
        <key>Config</key>
        <string>0x92180160</string>
        <key>Node</key>
        <integer>16</integer>
    </dict>
</array>

 

4th try:
Patch Node 15 and 16.
Sound panel shows 2 devices. (They are Node 13 and 15. Both works)
But Node 16 is no show.

<key>NodesToPatch</key>
<array>
    <dict>
        <key>Codec</key>
        <integer>0</integer>
        <key>Config</key>
        <string>0x92180150</string>
        <key>Node</key>
        <integer>15</integer>
    </dict>
    <dict>
        <key>Codec</key>
        <integer>0</integer>
        <key>Config</key>
        <string>0x92180160</string>
        <key>Node</key>
        <integer>16</integer>
    </dict>
</array>

 

 

Is there any solution to make both Node 13,15,16 works?
Thank You.
 

Clover_dump.txt

codec#0.svg

Ubuntu.dump.txt

Voodoo_NoPatch.txt

Voodoo_Patch_15_16.txt

Voodoo_Patch_15.txt

Voodoo_Patch_16.txt

Edited by bin456789

Share this post


Link to post
Share on other sites

Hello,

I'm hoping to get some help with regards to an issue I have with my Hackintosh.
For some reason, my Hackintosh shows each output device twice and I cannot figure out why this is happening.

I have attached a screenshot that shows all my audio outputs.

Inside my Kexts/Other folder I have the following files:
AppleALC.kext
FakeSMC.kext
Lilu.kext
USBInjectAll.kext
VoodooHDA.kext
Whatevergreen.kext

Also, the built-in speakers on my two LG monitors which should work if I select HDMI-out do not work but it's not a big deal for me since I have external speakers. It would be great to fix my audio config though.

Thanks for your help! Much appreciated.

Screen Shot 2020-03-07 at 11.19.32 AM.png

Screen Shot 2020-03-07 at 12.50.44 PM.png

Share this post


Link to post
Share on other sites

Don't use both AppleALC and voodoo, choose one or the other, which ever one works best for your system.

 

Share this post


Link to post
Share on other sites
45 minutes ago, moozuki said:

Don't use both AppleALC and voodoo, choose one or the other, which ever one works best for your system.

 

Thanks for your reply. 

 

I removed AppleALC but the issue persists. 

 

 

Share this post


Link to post
Share on other sites
On 2/14/2020 at 12:04 PM, bin456789 said:

Hi Slice. Thanks for your work. VoodooHDA might be the easiest way to get sounds in Hackintosk.

 

But I got some troubles in my laptop.
My laptop have "Beats Audio quad speakers and two subwoofers" according to HP website.
I want to make all the speakers works.

 

The inner speaker nodes are:
Node 13 bottom speakers
Node 15 upper speakers
Node 16 subwoofers

 

The Codec is IDT 92HD91BXX.

The VoodooHDA version is 2.9.2.


1st try:
Remove all NodesToPatch
Sound panel shows 1 device. (It's Node 13. It works)

 

2nd try:
Patch Node 15
Sound panel shows 2 devices. (They are Node 13 and 15. Both works)
<key>NodesToPatch</key>
<array>
    <dict>
        <key>Codec</key>
        <integer>0</integer>
        <key>Config</key>
        <string>0x92180150</string>
        <key>Node</key>
        <integer>15</integer>
    </dict>
</array>

 

3rd try:
Patch Node 16
Sound panel shows 2 devices. (They are Node 13 and 16. Both works)
<key>NodesToPatch</key>
<array>
    <dict>
        <key>Codec</key>
        <integer>0</integer>
        <key>Config</key>
        <string>0x92180160</string>
        <key>Node</key>
        <integer>16</integer>
    </dict>
</array>

 

4th try:
Patch Node 15 and 16.
Sound panel shows 2 devices. (They are Node 13 and 15. Both works)
But Node 16 is no show.

<key>NodesToPatch</key>
<array>
    <dict>
        <key>Codec</key>
        <integer>0</integer>
        <key>Config</key>
        <string>0x92180150</string>
        <key>Node</key>
        <integer>15</integer>
    </dict>
    <dict>
        <key>Codec</key>
        <integer>0</integer>
        <key>Config</key>
        <string>0x92180160</string>
        <key>Node</key>
        <integer>16</integer>
    </dict>
</array>

 

 

Is there any solution to make both Node 13,15,16 works?
Thank You.
 

Clover_dump.txt

codec#0.svg

Ubuntu.dump.txt

Voodoo_NoPatch.txt

Voodoo_Patch_15_16.txt

Voodoo_Patch_15.txt

Voodoo_Patch_16.txt

I think use Subwoofer is impossible because it is out of HDA spec.

You can't use node 16 as both outputs 19 and 20 are busy by nodes 13 and 15. Consider to put 15 and 16 in one association like

node 15 0x92170050

node 16 0x92170054

Also looks nodes 31,32 which are digital outputs like HDMI but not set in configs.

Share this post


Link to post
Share on other sites

Hey!

 

I ran into a problem with my Matebook X Pro running Catalina, I thought I'd update voodooHDA since i read somewhere that it was used already, but when I installed the newest voodoo, all my sound outputs disappeared.

 

Seems like it was using AppleALC after all. 

 

Any ideas on how i can fix this?

Also the preferences panel in settings doesn't work.

 

Thanks,

 

J

Share this post


Link to post
Share on other sites
Posted (edited)

Hi,

 

I'm using VoodooHDA on a Realtek ALC662 chip.

I have loads of HDMI ports, 6 in total. is there a way to remove the one that are not present in the system's graphics card?

 

Also, the sound is not as sharp as with AppleHDA.

Also, the sound is not as loud as with AppleHDA even though I upped the gain.

Are there fixes?

 

Thanks a lot.

Edited by zzmadd

Share this post


Link to post
Share on other sites
Posted (edited)

I have a sound chic with 5.1 sound on my motherboard, but there is only one green output on the back panel, how can I configure voodoohda so that the system sees only 2 sound channels?

1102817996_2020-05-1013_33_56.png.1cc34b03d4d622fe47985e1b0dc620ed.png

Edited by NEOSoftWare

Share this post


Link to post
Share on other sites
Posted (edited)
14 hours ago, Slice said:

Place LineOut nodes into different groups if you want.

 

Do I need to channel 21 and 22 from group 3? Can you tell me how to do this?

dump.txt

Edited by NEOSoftWare

Share this post


Link to post
Share on other sites

I'm using VoodooHDA 2.9.2 on a Realtek ALC662 chip.

I have loads of HDMI ports, 6 in total. is there a way to remove the one not needed?

I also have a SPDIF output but the system doesn't have one. Can it be removed?

Also, I have 2 analog inputs and 1 output. The 1 output is the green plug in the back of the motherboard panel. This works ok.

Both the front HDAudio and rear blue plug are missing from the menu. Can they be added?

If I listen to audio selecting the green rear port the front HDAudio plug sounds really bad with intermittent sound. Can't be used.

 

Thanks for your help.

Share this post


Link to post
Share on other sites

I have been running Catalina on dell inspiron 3670 with Radeon RX560.  Sound ports all present including analog from motherboard panel (realtek alc3820 chipset) and HDMI.  I have BigSur now running using OpenCore on the same machine (system cloned from VMware installation).  VoodooHDA only shows the HDMI digital outputs.  I attach snapshots of both systems from Hackintool and IORegistry explorer.  Any advice on how to restore analog ports would be appreciated.  Thanks.1207521900_Snip20200702_1(1).thumb.png.0dc8b776c6a9af490646c7f66fef722f.png1207521900_Snip20200702_1(1).thumb.png.0dc8b776c6a9af490646c7f66fef722f.png

Snip20200702_2.png

Snip20200702_1 (2).png

Snip20200702_3.png

Share this post


Link to post
Share on other sites

I have Intel NUC10i7FNK. It has Realtek ALC256
After sleep no sound anymore on Digital Audio (HDMI).

 

I couldn't find any solution

 

OS: Catalina 10.15.5

 

How can it be solved?

 

Thanks,

Evgeny

Edited by Evgeny R.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By vivek.gk
      Hi all ,
       
      Just finished successful install of mojave(10.14.6) everything is working except for sound for the matter ,
      i do not have much knowledge on patch and stuff , even though tried AppleAlc layout-id which did not work for me ,
      i tried voodohda also which did not work either it ends up in panic .
      with DCPI manager it says audio controller 
      PCI Subvendor: 0x225d103c not sure what is my supported alc here .  
      i am attaching darwin dump and dsdt extracted aml and config plist used (rehabman(config.plist for intel4600)
       
      could some one guide me through this as i am newbie to this .
      DarwinDumper_2.9.9b7_INSYDE_Corp._X64_Unknown_vv.rar
      dsdt.rar
      config.plist
    • By ITzTravelInTime
      KX AUDIO DRIVER MOD
       
      Hi guys i am a small developer, i really like to use my sound blaster cards on my machines and i love also coding, so when i find the source code for the kx audio driver on git hub and then Eugene, the creator of kx audio driver decided to no longer maintain the project, i decided to start working on a mod of this driver and maintain it. 
       
      With my mod, created starting from the sources of the last official version of kx audio driver and all the small commiunity updates, i am working to keep the driver compatible with the latest mac os versions and to improove the driver over time.
       
      Supported cards are:
       
       - most of the Sound Blaster live!, live! 5.1 and live! 5.1 digital series (except for the cards not using the 10k1 architecture)
       - sound blaster pci 512 and pci 256
       - Sound Blaster Audigy, Audigy 2 and Audigy 2 zs series
       - E-MU cards based on the 10k2 sound chip (like the EMU8852 aka 0404m, including the pcie version)
       - Sound Blaster Audigy 4 (SB0610 only) and the Audigy 4 pro
       - Sound Blaster Audigy RX (SB0155)
       - other creative and e-mu cards based on the (10k1,10k2, 10k2.5 and CA10300 based cards)
       
      The NOT supported cards includes (but are not limited to):
       
       - ES1370/ES1371/ES1372/ES1373 based sound cards
       - Any CA0106 based card and cards with similar architectures (like sound blaster live! 24 bit, sound blaster audigy SE SB0570, audigy LS and similars, but audigy SA is supported)
       - Any sound blaster x-fi (some of them works on macOS using a modified version of voodoo hda)
       - Any sound blaster recon3D
       - Sound blaster Audigy FX
       - Any sound blaster Z/ZS/ZX and similar series
       - Any sound blaster AE5/AE7/AE9 series
       - Any sound card without an emu sound chip
      - Any ISA Sound card
       
      In the time being the things i have modded or added with this mod are:
       
      - cracking and stability fixes
       
      - added a more proper support for the pci express Sound Blaster audigy rx SB0155 (which basically is an audigy 4 with a pcie bridge chip) 
       
      - more user-frienly names for the cards in the settings and other system menus (so the name will be, for example, SB live! 5.1 SB0060 instead of kx SB0060 [e880] witch was shown in the original driver)
       
      - added support to sample rate changing and bit resolution change (the absolte worst supported quality is 7 khz at 8 bit dept while the absolute best is 192 khz at 32 bit depth)
       
      - inputs support
       
      - added boot args to manage the driver (more info on those soon)
       
      What i'd like to implement but i don't know how to do:
       
       - fix the support when using more than one card, to get all the cards shown in the settings and other menus,
       
       - have the gameport/midi port of older cards to be used in mac os as a midi in/out
       
      If other developers would like to join and help they are free to do so, this is a free open source project afterall, and also an hand from other people with testing and feedback will be nice.
       
      LINKS and downloads:
               -  github repo:                                               https://github.com/ITzTravelInTime/kx-audio-driver   (kext download coming soon, since an update is coming)  
       





    • By AbhilashSathe
      I'm currently using AppleALC inside /EFI/Clover/Kexts.
      Sound works fine through Laptop speakers. However, as soon as I connect my earphones, i start getting a continuous buzzing sound. Can anyone help me with this?

      config.plist
      SSDTS_DSDT.zip

       
      rough 
    • By LSP414
      Cannot figure out where to put custom ringtones on Catalina so I can select them in contacts. They are in the iTunes folder but are not recognized
    • By Diptamondal
      dell inspiron 5378 hackintosh wifi don't work 
×