Jump to content
nmano

[Guide] Mac OSX 10.12 and 10.13 with X99 Broadwell-E family and Haswell-E family

2,140 posts in this topic

Recommended Posts

First of all you must change a patch in clover (thanks to PMHeart for help) and then if you have multiple config delete all and leave the one you use.

Here are new patches:

 

 

old:         find:             83c3c483 fb22

               replace:       83c3c183 fb22

                                   xcpm_bootstrap © Pike R. Alpha

               

new:       find:             8d43c483 f822

               replace:       8d43c183 f822

                                   xcpm bootstrap  derived from Pike R. Alpha's Ivy Bridge patch

Thank ;-)

Share this post


Link to post
Share on other sites
Advertisement

X99 Mac osx 10.13

 

First of all you'll need to have Install macOS 10.13 Beta.app in your Applications folder.

 

Then, you'll need to right click it and then go to Show Package Contents/Contents/Shared Support and from there mount InstallESD.dmg.

Once mounted there you'll find Packages folder and inside Core.pkg.

 

Double click Core.pkg and this will install macOS to desired partition, SSD or HDD.

 

Once done, mount BaseSystem.dmg and then copy System/Library/CoreServices/boot.efi and paste it to the same location System/Library/CoreServices/boot.efi   on the installed drive.

 

 

 

 Boot it with your existing Clover and in few seconds you'll reach desktop screen.

 

Thank you. Clover team and Apple ALC and others naveedamad,

post-413859-0-01474500-1501092644_thumb.png

Share this post


Link to post
Share on other sites

I need some advice about a minimum config for X99  Xeon for my future build ( i post here for a short off topic) :

 

I saw those components wich seems be a good start :

 

- ASROCK X99M Extreme4

- Intel Xeon E5-2603V3 - Procesor 6 cores 1.6 GHz - 15 Mo - LGA2011-v3

- G.SKILL - Ripjaws V Series 64 Go 4 x 16 Go DDR4 - 2133 MHz

- WESTERN DIGITAL - WD Black SSD PCIe NVMe 512 Go

 

Can you help me about graphic card may work OOB ?

 

Other sugestions are welcome ;)

Share this post


Link to post
Share on other sites

"

Questions  about a minimum config for my  X99  Xeon build ( prehaps off topic) :

 

- ASROCK X99M Extreme4

- Intel Xeon E5-2603V3 - Procesor 6 cores 1.6 GHz - 15 Mo - LGA2011-v3

- G.SKILL - Ripjaws V Series 64 Go 4 x 16 Go DDR4 - 2133 MHz

- WESTERN DIGITAL - WD Black SSD PCIe NVMe 512 Go

 

Can you help me about graphic card may work OOB ?

 

Other sugestions are welcome ;)"

 

 

 Nvidia GT- 610 works oN Yosemite and El Capitan but it does not work on Sierra, Nvidia GT-710 works on Sierra out of the box

 

 

 

 

Share this post


Link to post
Share on other sites

try now 

I apologize for missing file.

Share this post


Link to post
Share on other sites
Last login: Thu Jul 27 14:38:58 on console
navaratnams-Pro:~ navaratnam$ sudo chown -R root:wheel /Users/navaratnam/Desktop/AppleIntelInfo.kext 
Password:
navaratnams-Pro:~ navaratnam$ sudo chmod -R 755 /Users/navaratnam/Desktop/AppleIntelInfo.kext 
navaratnams-Pro:~ navaratnam$ sudo kextload /Users/navaratnam/Desktop/AppleIntelInfo.kext 
navaratnams-Pro:~ navaratnam$ sudo cat /tmp/AppleIntelInfo.dat

AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved
enableHWP................................: 0

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0xe512306e128e (8395 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Core(TM) i7-5960X CPU @ 3.00GHz

Processor Signature..................... : 0x306F2
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 2
 - Model................................ : 0x3F (63)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0x1E
------------------------------------------
 - Core Count........................... : 8
 - Thread Count......................... : 16

MSR_PLATFORM_INFO................(0xCE)  : 0x80C3BF3811E00
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x1E (3000 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 12
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x7E000403
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 1 (enabled)
 - Package C-State Undemotion........... : 1 (enabled)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
 - LVL_2 Base Address................... : 0x414
 - C-state Range........................ : 1 (C6 is the max C-State to include)

IA32_MPERF.......................(0xE7)  : 0x2308028639
IA32_APERF.......................(0xE8)  : 0x26137394DB

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x280400000C00
------------------------------------------
 - Current Performance State Value...... : 0xC00 (1200 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xFF00
------------------------------------------
 - Target performance State Value....... : 0xFF00 (25500 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x883C0000
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 0
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 60
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x591200
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 89
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000
------------------------------------------
 - EIST Hardware Coordination........... : 0 (hardware coordination enabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2B2B2B2B2B2B2B2B
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 2B (4300 MHz) 
 - Maximum Ratio Limit for C02.......... : 2B (4300 MHz) 
 - Maximum Ratio Limit for C03.......... : 2B (4300 MHz) 
 - Maximum Ratio Limit for C04.......... : 2B (4300 MHz) 
 - Maximum Ratio Limit for C05.......... : 2B (4300 MHz) 
 - Maximum Ratio Limit for C06.......... : 2B (4300 MHz) 
 - Maximum Ratio Limit for C07.......... : 2B (4300 MHz) 
 - Maximum Ratio Limit for C08.......... : 2B (4300 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
 - Power Policy Preference...............: 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x21040059
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 0 (disabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFD00014EA82
------------------------------------------
 - Package Power Limit #1............... : 3408 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 0 (disabled)
 - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
 - Package Power Limit #2............... : 4090 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
 - Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x628157E
------------------------------------------
 - Total Energy Consumed................ : 6304 Joules (Watt = Joules / seconds)

MSR_PKG_POWER_INFO...............(0x614) : 0x1280460
------------------------------------------
 - Thermal Spec Power................... : 140 Watt
 - Minimum Power........................ : 0
 - Maximum Power........................ : 0
 - Maximum Time Window.................. : 0

MSR_PP0_POWER_LIMIT..............(0x638) : 0x14FFD0
------------------------------------------
 - Power Limit.......................... : 4090 Watt
 - Enable Power Limit................... : 1 (enabled)
 - Clamping Limitation.................. : 0 (disabled)
 - Time Window for Power Limit.......... : 10 (10240 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PP0_ENERGY_STATUS............(0x639) : 0x0

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x1E
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x940000001B0460
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x94000000000000
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x1F5349EC84
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x1FB600C
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x8157003B82

IA32_TSC_DEADLINE................(0x6E0) : 0xE5123B05752C

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 30 (3000 MHz)
Maximum Turbo Ratio/Frequency............: 43 (4300 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 35 ]
CPU C3-Cores [ 0 4 6 9 11 14 ]
CPU C6-Cores [ 0 2 4 6 8 10 12 14 ]
CPU P-States [ (12) 23 35 ]
CPU C3-Cores [ 0 1 4 6 8 9 11 14 ]
CPU C6-Cores [ 0 2 4 6 8 9 10 12 14 ]
CPU P-States [ (12) 23 32 35 ]
CPU C3-Cores [ 0 1 4 6 8 9 11 14 15 ]
CPU P-States [ 12 23 26 32 35 (43) ]
CPU C3-Cores [ 0 1 4 6 8 9 10 11 14 15 ]
CPU P-States [ (12) 20 23 26 32 35 43 ]
CPU P-States [ (12) 20 23 26 32 35 39 43 ]
CPU P-States [ (12) 20 23 24 26 32 35 39 43 ]
CPU C3-Cores [ 0 1 4 6 7 8 9 10 11 14 15 ]
CPU P-States [ 12 20 23 24 (25) 26 32 35 39 43 ]
CPU P-States [ (12) 20 23 24 25 26 27 32 35 39 43 ]
CPU C6-Cores [ 0 1 2 4 6 8 9 10 12 14 ]
CPU P-States [ (12) 20 23 24 25 26 27 32 34 35 39 43 ]
CPU C6-Cores [ 0 1 2 4 6 8 9 10 12 14 15 ]
CPU C3-Cores [ 0 1 4 5 6 7 8 9 10 11 14 15 ]
CPU P-States [ (12) 20 23 24 25 26 27 31 32 34 35 39 43 ]
CPU P-States [ (12) 20 23 24 25 26 27 28 31 32 34 35 39 43 ]
CPU P-States [ 12 18 20 (21) 23 24 25 26 27 28 31 32 34 35 39 43 ]
CPU P-States [ (12) 18 20 21 23 24 25 26 27 28 30 31 32 34 35 39 43 ]
CPU P-States [ (12) 16 18 20 21 23 24 25 26 27 28 30 31 32 34 35 39 43 ]
CPU P-States [ (12) 16 18 20 21 22 23 24 25 26 27 28 30 31 32 34 35 39 43 ]
navaratnams-Pro:~ navaratnam$ 

XCPM 10.12 and 10.13 for Haswell-E update

Bios settings

C1E: Disabled

C6/C7: Enabled

EIST-Enabled

 

 

XCPM 10.12 and 10.13 update.zip

post-413859-0-11704900-1501180655_thumb.png

Share this post


Link to post
Share on other sites

Can I know how to fix unknown CPU 

 

I try with clover type 2561 not work

post-413859-0-73947300-1501289325_thumb.png

post-413859-0-05723200-1501289333_thumb.png

Share this post


Link to post
Share on other sites

Unknown CPU Fixed

About this Mac unknown cpu error fixed.

Thius patched worked Haswell-E CPU and  Broadwell CPU

1-Enable in config xcpm_bootstrap_Broadwell or Haswell

2-Enable in config xcpm_cpuid_set_infoBroadwell or Haswell

3-FakeCPUID is Broadwell 0x040674

4.CPU Type is Broadwell 0x0a02

5-FakeCPUID is Haswell 0x0306F2

6.CPU Type is Haswell 0x0a01

 

 

 

 

 

XCPM Brodwell and Haswell.zip

Share this post


Link to post
Share on other sites

Guys:

 

Really will appreciate help on my Build. After 4 days fighting to Install sierra on my Mackintosh I found this post. My system is currently running "El Capitan" with and old GT Nvidia card from a MacPro 1.1. I have a brand new EVGA GeForce1050 Ti that I am trying to add to the system that require Sierra at the minimum. So far I tried all kind if Guidelines and could not get the USB installer pas the initial stage (Apple Logo Freeze) or Continuous reboot loop. My Hardware is as follow:

 

I have the following hardware:

 

ASRock X99E-itx/ac using a Intel 6800K

RAM Corsair 16 GB * 2 Sticks (revenge led 32GB total)

SSD Samsung 266 NVE Install

EVGA GeForce 1050 Ti 4 GB

Custom Water cooling system

 

After all recommended settings in BIOS, I tried boot, but unfortunately without success.

What's wrong?

Could you please help me with right setup and just desperate?

Thanks!

 

I am attaching My IoReg and also my 2 EFI Folders (HD El Capital and USB Sierra)

Eltito51.zip

Share this post


Link to post
Share on other sites

Hi nmano,

 

Is there any different with configuring Xeon E5 v4, on Sierra?

I'm using a E5-2648L v4, with the configs from your guide, but it seems the CPU power management is not engaged.

Although in ioreg, the pm are loaded, but the CPU freq/power stay at max. The AppleIntelInfo shows only one p-state(max).

 

Thanks!

 

 

Unknown CPU Fixed

About this Mac unknown cpu error fixed.

Thius patched worked Haswell-E CPU and  Broadwell CPU

1-Enable in config xcpm_bootstrap_Broadwell or Haswell

2-Enable in config xcpm_cpuid_set_infoBroadwell or Haswell

3-FakeCPUID is Broadwell 0x040674

4.CPU Type is Broadwell 0x0a02

5-FakeCPUID is Haswell 0x0306F2

6.CPU Type is Haswell 0x0a01

 

 

 

 

 

XCPM Brodwell and Haswell.zip

 

Share this post


Link to post
Share on other sites

Hi nmano,

 

Is there any different with configuring Xeon E5 v4?

I'm using a E5-2648L v4, with the configs from your guide, but it seems the CPU power management is not engaged.

Although in ioreg, the pm are loaded, but the CPU freq/power stay at max. The AppleIntelInfo shows only one p-state(max).

 

Thanks!

Hi

take a look to this thread (it is xeon V4 related)

 

http://www.insanelymac.com/forum/topic/316516-macos-sierra-on-broadwell-eep-not-a-guide-but-maybe-a-working-in-progress/page-1

 

you have also specify whic osx version you are using 

Share this post


Link to post
Share on other sites

I was using the configs you provided for 12.6, but still got machdep.xcpm.mode: 0.

 

Does the SSDT matter? Because ssdtprgen.sh does not support my CPU, I added those value manually to generate this ssdt.

 

Also, I saw the long thread you had with pikeralpha on github. You also had the xcpm.mode=0 with your 2699.

Did you figure it out in the end?

 

Hi

take a look to this thread (it is xeon V4 related)

 

http://www.insanelymac.com/forum/topic/316516-macos-sierra-on-broadwell-eep-not-a-guide-but-maybe-a-working-in-progress/page-1

 

you have also specify whic osx version you are using 

Share this post


Link to post
Share on other sites

Still not...

Could you enlighten me how you would do?

 

Thanks!

 

Yes
Try to use frequencyvector script from pikeralpha github
You can use 14.1 or 17.1 frequency vector
Then you will have xcpm=1

Share this post


Link to post
Share on other sites

Find on pikeralpha github frequencyvevtors.sh script
Download it
Run terminal window and drag & drop script on it
Follow instructions and choose 14.1 or 17.1 in list you should see as option
Till process end you have to reboot
Now you should have xcpm=1 if you do not have other problem in your sierra installation
Link
https://github.com/Piker-Alpha/freqVectorsEdit.sh

post-468967-0-61689500-1501660828_thumb.png

Share this post


Link to post
Share on other sites

Guys:

 

Really will appreciate help on my Build. After 4 days fighting to Install sierra on my Mackintosh I found this post. My system is currently running "El Capitan" with and old GT Nvidia card from a MacPro 1.1. I have a brand new EVGA GeForce1050 Ti that I am trying to add to the system that require Sierra at the minimum. So far I tried all kind if Guidelines and could not get the USB installer pas the initial stage (Apple Logo Freeze) or Continuous reboot loop. My Hardware is as follow:

 

I have the following hardware:

 

ASRock X99E-itx/ac using a Intel 6800K

RAM Corsair 16 GB * 2 Sticks (revenge led 32GB total)

SSD Samsung 266 NVE Install

EVGA GeForce 1050 Ti 4 GB

Custom Water cooling system

 

After all recommended settings in BIOS, I tried boot, but unfortunately without success.

What's wrong?

Could you please help me with right setup and just desperate?

Thanks!

 

I am attaching My IoReg and also my 2 EFI Folders (HD El Capital and USB Sierra)

Sorry bud, but my knowledge of this OS stops at 10.12.3. I'm no longer using it due to its overall instability. I suggest that if you're not going to use or plan on using Mac OS specific software, and you don't want Windows, then look into Linux. It's what I've been running for several months now and it's been perfect my needs. If you are going to use Mac OS software, then either stick with El Capitan or else you'll be on your own and expect months of learning, understanding, researching and tinkering to get Sierra to work (no guarantees of stability). This community is a great place for learning/sharing if you do decide to try Sierra; but, if that sounds like too much work, then look into a VMware solution (it'll be stable, but expect slower performance due to hardware/software limitations).

Share this post


Link to post
Share on other sites

Guys:

 

Really will appreciate help on my Build. After 4 days fighting to Install sierra on my Mackintosh I found this post. My system is currently running "El Capitan" with and old GT Nvidia card from a MacPro 1.1. I have a brand new EVGA GeForce1050 Ti that I am trying to add to the system that require Sierra at the minimum. So far I tried all kind if Guidelines and could not get the USB installer pas the initial stage (Apple Logo Freeze) or Continuous reboot loop. My Hardware is as follow:

 

I have the following hardware:

 

ASRock X99E-itx/ac using a Intel 6800K

RAM Corsair 16 GB * 2 Sticks (revenge led 32GB total)

SSD Samsung 266 NVE Install

EVGA GeForce 1050 Ti 4 GB

Custom Water cooling system

 

After all recommended settings in BIOS, I tried boot, but unfortunately without success.

What's wrong?

Could you please help me with right setup and just desperate?

Thanks!

 

I am attaching My IoReg and also my 2 EFI Folders (HD El Capital and USB Sierra)

Hi Tito95

your config.plist is to update with some kernel patch to have a chance to boot

If you are installing macOS Sierra 10.12.6 try to see in my config.plist

 

you can find in this link all my efi, maybe it could be useful also for you

 

10.12.6-efi.zip

Share this post


Link to post
Share on other sites
On 8/3/2017 at 4:45 PM, Fergarth said:

Hi Fabio. I apologize for not being the most suitable place for this subject. But can you once again help me with the new bios... already tried as you said, but it does not work for me!

Thank you!

 

No problem here

Hi have included also UEFIpatch and txt used to do it

 

 

Edited by fabiosun

Share this post


Link to post
Share on other sites

No problem here

Hi have included also UEFIpatch and txt used to do it

Thank you friend! I'm finishing a backup and then I'll test! ?

Share this post


Link to post
Share on other sites

I edit freqVectors 3400 to 4300

X86PlatformPlugin.kext/Contents/Resources/

Replace: /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns//Resources

The target plist (example: Mac-F60DEB81FF30ACF6.plist for the MacPro6,1) is selected based on the used board-id.

 

Try Pike R. Alpha /freqVectorsEdit.sh then replace this file.

Thanks pike.

Mac-F60DEB81FF30ACF6.plist.zip

post-413859-0-13245500-1501849245_thumb.png

Share this post


Link to post
Share on other sites

Could you explain better what this modify plist can do?

This below I mean...

Thank you

<key>Frequencies</key>
		<dict>
			<key>3400</key>
			<integer>0</integer>
			<key>3500</key>
			<integer>1</integer>
			<key>3600</key>
			<integer>2</integer>
			<key>3800</key>
			<integer>3</integer>
			<key>3900</key>
			<integer>4</integer>
			<key>4100</key>
			<integer>5</integer>
			<key>4300</key>
			<integer>6</integer>
		</dict> 

 

I edit freqVectors 3400 to 4300

X86PlatformPlugin.kext/Contents/Resources/

Replace: /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns//Resources

The target plist (example: Mac-F60DEB81FF30ACF6.plist for the MacPro6,1) is selected based on the used board-id.

 

Try Pike R. Alpha /freqVectorsEdit.sh then replace this file.

Thanks pike.

post-468967-0-54428200-1501864221_thumb.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×