Jump to content
  1. kylon

    kylon

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By datta0
      Hi, I have a small problem with my Open core Hackintosh build.
      I actually got EFI from someone on the internet and tweaked it a bit so I could get up and running.
      Here is my EFI.
      My laptop boots fine but while booting, it shows the apple logo for the first 5 seconds, then goes blank for 2-3minutes and then I see apple login screen.
      This happens every time. I tried a few config edits but didn't work.
      Can someone look into my EFI and suggest any necessary changes that can improve boot times?

      Thanks in advance 
    • By Raffay1234
      I'm transitioning from Clover to Opencore. I thought the process will be simpler but it turns out it isn't. I have created a bootable Catalina USB with Opencore but stuck at this error. I have attached my EFI and the verbose output. Anyone please provide some guidance please?
       
      The laptop is HP Pavilion 15 Gaming:
      Intel Core i7-9750H
      16GB RAM
      256GB SSD + 1TB SSD
      PS2 Keyboard + I2C Trackpad
       

      EFI.zip
    • By rawmassen
      Hi there,
       
      If anyone could help I'd be very grateful, I'm trying to move from Clover to OC but have hit a brick wall for the last 2 days.
       
      It's an ACPI table error: SB_.PCIO.XHC_RHUB.HS11, Namespace lookup failure.
       


      Skylake Build:
      OpenCore 0.5.9
      Mojave 10.14.6, iMac17,1
      Asus Maximus Hero VIII
      6700K
       
      I've attached the config.plist and ACPI folder.
       
      EFI Drivers: OpenRuntime.efi and HfsPlus.efi
      Kexts: IntelMausi, Lilu, VirtualSMC, Whatevergreen
       
      Things I've tried...
       
      1) Clearing NVRAM (as it was previously booted by Clover)
       
      2) Hackintool USB Mapping: both the SSDT files and the USBPorts.kext
       
      3) USBInjectAll.kext (with and without SSDT files)
       
      4) SSDT-RHUB.aml. This seems to be directly involved, spent a long time with this but with no luck.
       
      I followed this guide:
       
      https://dortania.github.io/Getting-Started-With-ACPI/Universal/rhub-methods/manual.html
       
      Everything is XHC in my DSDT, except these definitions at the top (line 72 and 73):
       
          External (_SB_.PCI0.XHC_.DUAM, MethodObj)    // Warning: Unknown method, guessing 0 arguments     External (_SB_.PCI0.XHC_.RHUB.INIR, MethodObj)    // Warning: Unknown method, guessing 0 arguments  
      So I edited the SSDT-RHUB.dsl to this:
       
      /* * Goal of this SSDT is to shut off the RHUB to force macOS into * manually building ports when the ACPI is screwed up */ DefinitionBlock ("", "SSDT", 2, "DRTNIA", "RhubOff", 0x00001000) { External (_SB_.PCI0.XHC.RHUB, DeviceObj) // Full pathing to RHUB, change to yours Scope (_SB.PCI0.XHC.RHUB) // Full pathing to RHUB, change to yours { Method (_STA, 0, NotSerialized) { If (_OSI ("Darwin")) { Return (Zero) // This disables the device only in macOS } Else { } } } } Which results in this AML version:
      DefinitionBlock ("", "SSDT", 2, "DRTNIA", "RhubOff", 0x00001000) { External (_SB_.PCI0.XHC_.RHUB, DeviceObj) Scope (_SB.PCI0.XHC.RHUB) { Method (_STA, 0, NotSerialized) // _STA: Status { If (_OSI ("Darwin")) { Return (Zero) } Else { } } } } But I get the same error. 
       
      I'm at a complete loss, can anyone help?
       
       
      config.plist
      ACPI.zip
    • By nyichiban1
      So I got some new hardware:
      Asus Z490I Gaming ITX
      NZXT H1 Case
      Intel i9-10900
      samsung 970 EVO plus NVME
      SK Hynix 1TB SSD
      32GB G.Skill 3200 C14 Ram
      MSI 5700 XT Evoke
       
      So I got windows installed and wanted to install macOS using opencore. I had no luck getting past the [EB|#LOG:EXITBS:START] error and decided to use someone else's EFI who had the same motherboard minus the CPU and GPU (i7-10700k and Radeon VII). I went ahead with that EFI and voila got it to install and got past the error I had. The issue was after the install there is a reboot and that's where it hangs and give me an error log that I attached. Tried a few more things to see what I could do but was stuck on that error log every single time. Decided to try again today and now I can't get past the original error log. I've looked at the dortania guide for that error and tried everything it suggested but still won't get past the error. Not sure what else to do but to try Clover maybe. Anyone have any suggestions? I've attached my EFI as well. Thanks in advance.
      Installer_Log_8-Jul-2020.txt
      EFI.zip
    • By CaccapoKissima
      Hi, I wanted to transpose my CLOVER installation to OpenCore for future updates.
       
      I followed this guide and after some googling
      https://github.com/dortania/vanilla-laptop-guide
      I've fixed the LOG: EXITBS error (RANDOM SEED like error).
      Now I still receiving the IOPCI error (kernel_task kernel panic). 
       
      My CLOVER is fully working.
      - Backlight and Monitor
      - Trackpad
      - i7-7700HQ
      - Battery Patch
      - Camera and Audio (B&O)
      - Keyboard
      - dGPU GTX 1050 is turned off
       
      On OpenCore I translated everything except the battery (I just need to apply the If statement in ACPI), but I want first to boot on Mac OS using the OpenCore.
       
      HP Pavilion Power 15 
       
       
      config.plist

×