HackPro X99 System
Until Apple blesses us with the MacPro7,1 – this is for those that require tools to do their work.
An appropriate bicycle for the mind.
CPU: Intel Xeon E5-2678 v3 (12 core, 2.5 GHz / 3.3 GHz Boost)
Motherboard: SZMZ X99-8D3
RAM: 16GB DDR3-14900R 1866Mhz ECC RDIMM modules
GPU: Radeon RX Vega 64 8GB
Storage: Phison E12 m.2 NVMe PCI-E 3.0 x4 SSD
Water blocks: BARROW CPU + GPU
Radiator: 360mm x 25mm slim
Case dimensions: 431 mm x 342 mm x 177 mm
Win 10 x64 v1809
AIDA64 - Cache & Memory
Anyone else I forgot
Hi All - quick thing - I have a NUC 8i7BEH with 32GB RAM and 2 x 1TB SSD drives. Each drive has its own OS - Windows 10 and Catalina 10.15.
Clover works well - Catalina Boots, so does Windows.
Catalina - has sound over HDMI (to my monitor's speakers)
Windows - no audio device found - It does show Realtek and Intel Display Drivers - but the speaker has a red"x" and in Devices, there is no entry for Microphone Array under Audio Input/Output. It does, however, show Intel display over the HDMI - but actually no sound.
I have tried reinstalling Realtek drivers - now here's the thing...when it installs, it first uninstalls existing Realtek drivers - at this stage (and it's important) the sound starts working - as if uninstalling did the trick. As part of the installing, I have to reboot and upon reboot, it actually reinstalls the Realtek drivers. After that, I'm back to square 1. Unsure if it's the config.plist or boot args in clover. But something with Clover for sure.
I have tested this by removing the Mac Drive with clover and just booting directly to Windows 10 bootloader and everything works as it should, I have sound over HDMI and the audio device shows. Just not when I boot with Clover.
has anyone experienced this and have thoughts or pointers.
Thanks a ton!
*Update bios/uefi to F7+*
1- Go to M.I.T./Advanced Frequency Settings tab
Extreme Memory Profile (X.M.P.) - Profile 1
2- Go to BIOS tab
CSM Support - Disabled
3- Go to Peripherals/Thunderbolt(TM) Configuration tab
Security Level - No Security
Thunderbolt USB Support - Enabled
GPIO3 Force Pwr - Enabled
4- Go to Chipset tab
Internal Graphics - Enable
https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
*Use this folder with FULL DSDT PATCHED
*Use this folder with FULL DSDT PATCHED
---Extract one Full dump for DSDT edits, post files---
GIGABYTE Z390 DESIGNARE
Intel Core i9-9900K
CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
MSI RX Vega 64 AIR Boost 8G OC
Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular
TP-Link Archer T9E
Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
-FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---
-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
Thanks to KGP for SSDT Thunderbolt
Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
We're all here to have fun and learn from each other!
ACPI and Clover config for Acer Aspire v5-571PG
Tested on Catalina 10.15.1 and Clover EFI 5098 (Should work on MacOS 10.9.x - 10.15.x)
- sd card reader
- Atheros AR9462 (use a compatible USB wireless adapter, see below)
- Touchscreen (MacOS 10.15 only)
Disable Secure Boot and enable Legacy Boot. Legacy Mode is recommended.
**To reset your BIOS, power on the pc and hold the power button for about 30-40 seconds or you can short G2101 (RAM SLOT 1)**
About the Atheros card:
You can install ATH9KFixup (you will also need additional patches on 10.14+ to restore Atheros support) to enable this card, however,
it will break sleep on MacOS 10.14+, it can freeze your OS at any time and it can freeze your network settings.
Because of its instability it is highly recommended to buy a USB wireless adapter.
You can find a list of working adapters, and the drivers, here.
Additional things you will need:
Latest Clover config (AcerAspireV5-571pg - CCE Bank) from here CloverEFI (download) or OpenCore (download - Untested) WhateverGreen (download) VoodooPS2 (download) VirtualSMC + SMCBatteryManager (download) AppleALC (download) Lilu (download) Mieze Realtek RTL8111 (download)
CloverEFI drivers you will need:
ApfsDriverLoader EmuVariableUefi FSInject DataHubDxe VBoxHfs (if you have hfs partitions)
Remember to install BIOS drivers if you enable Legaby Boot.
Feel free to ask for help.
Please send me a PM if you have fixes or improvements, thanks.
Hi all, i just want to know how can use mouse & keyboard USB with USB port when Cloverbootloader startup? I installed Ps2MouseDxe.efi and UsbMouseDxe.efi but not work, while touchpad and keyboard integrated laptop working!!
and 2nd question is: i installed success Catalina with APFS format, in Disk Utility show 2 partition is Catalina SSD and Catalina Data?? what is it?
more and last, sorry cause it's short question: which most right, in 2 ways create USB installer Catalina,
sorry my bad english!
sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled && echo Catalina Boot Drive Created
sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ macOS\ Catalina.app --nointeraction
thanks and regards