Jump to content
stinga11

Sandy Bridge-E & Ivy Bridge-E Power management 10.12 Beta

54 posts in this topic

Recommended Posts

I had a look, and there is quite a few differences in config.plist - I see you only patch AppleIntelCPUPower with 3 changes compared to 7 on the original post. 

 

I tried your SSDT as it was quite different from mine. Only thing I changed first was speeds - freq - 4125, turbo 4500, bclk 125 as that is my over clock settings. Should this work with overclocking ?

 

Attached are my files incase you or someone could look and give me any pointers

 

Thanks

Share this post


Link to post
Share on other sites
Advertisement

There's 7 patches for each OS (some are shared). Running ssdtPRGen without any extra parameters would be better for your CPU than trying to make mine fit. That's how I did it.

Share this post


Link to post
Share on other sites

Thanks - I tried turning any overclocking off & re did the SSDT. Still the same, now is just stuck on 3300 instead of 4125

 

Your system is so close to mine, apart from graphics. Curious what's different

Share this post


Link to post
Share on other sites

I've managed to finally get it kind of working, I rebuilt the DSDT and SSDT and then had to apply the 10.12 aicpm patch, the clover patch was not working.

 

So the things that are working

- Temperature has dropped from about 61C to 40C

- Power draw on intel power gadget significantly lower

- Istats shows the turbo clock are working 4.25, 4.38, 4.5 Ghz

 

None of the lower states are working however, it never drops below 4.12

 

If I look at AppleIntelInfo.kext, I see a strange output

 

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved

 

Settings:

------------------------------------

logMSRs............................: 1

logIGPU............................: 0

logIntelRegs.......................: 1

logCStates.........................: 1

logIPGStyle........................: 1

InitialTSC.........................: 0x15aa7954f6162

MWAIT C-States.....................: 135456

 

Model Specific Regiters

------------------------------------

MSR_CORE_THREAD_COUNT......(0x35)  : 0x6000C

MSR_PLATFORM_INFO..........(0xCE)  : 0xC0070012100

MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E008400

MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x20414

IA32_MPERF.................(0xE7)  : 0x3810362091

IA32_APERF.................(0xE8)  : 0x3D7E0B185E

MSR_FLEX_RATIO.............(0x194) : 0xE2100

MSR_IA32_PERF_STATUS.......(0x198) : 0x276400002400

MSR_IA32_PERF_CONTROL......(0x199) : 0x3900

IA32_CLOCK_MODULATION......(0x19A) : 0x0

IA32_THERM_STATUS..........(0x19C) : 0x882F0000

IA32_MISC_ENABLES..........(0x1A0) : 0x850089

MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001

MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x393939393939

IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0

MSR_POWER_CTL..............(0x1FC) : 0x2104005F

MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003

MSR_PKG_POWER_LIMIT........(0x610) : 0x80069F4000149F40

MSR_PKG_ENERGY_STATUS......(0x611) : 0x24BD470B

MSR_PKG_POWER_INFO.........(0x614) : 0x1A80410

MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x80001FFF

MSR_PP0_POWER_LIMIT........(0x638) : 0x80000000

MSR_PP0_ENERGY_STATUS......(0x639) : 0x1B405D2F

MSR_PP0_POLICY.............(0x63a) : 0x0

MSR_PKGC6_IRTL.............(0x60b) : 0x8868

MSR_PKGC7_IRTL.............(0x60c) : 0x886D

MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0

MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0

MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0

MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0

IA32_TSC_DEADLINE..........(0x6E0) : 0x15AA798365622

PCH device.................: 0x1D418086

 

CPU Ratio Info:

------------------------------------

CPU Low Frequency Mode.............: 1200 MHz

CPU Maximum non-Turbo Frequency....: 3300 MHz

CPU Maximum Turbo Frequency........: 5700 MHz

CPU P-States [ 33 (36) ]

CPU C3-Cores [ 0 1 2 9 11 ]

CPU C6-Cores [ 2 4 5 8 10 ]

CPU C7-Cores [ 0 1 2 6 7 11 ]

CPU P-States [ (12) 33 34 36 ]

CPU C3-Cores [ 0 1 2 4 6 8 9 11 ]

CPU C6-Cores [ 0 2 3 4 5 6 7 8 10 ]

CPU C7-Cores [ 0 1 2 4 5 6 7 8 9 10 11 ]

CPU C3-Cores [ 0 1 2 3 4 5 6 8 9 11 ]

CPU C6-Cores [ 0 2 3 4 5 6 7 8 10 11 ]

CPU C7-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

CPU P-States [ (12) 33 34 35 36 ]

CPU C3-Cores [ 0 1 2 3 4 5 6 8 9 10 11 ]

CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 10 11 ]

CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

 

CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

 

Maximum non turbo is 3300 and maximum turbo is 5700 ! Mine should be 4125 non turbo max and 4500 max turbo. Should I be worried about this ? Anything else I should check

 

Can anyone help with why it doesn't drop to the lower frequencies when under low load ? Attached are my config.plist, DSDT and SSDT

 

Thanks !

Archive.zip

Share this post


Link to post
Share on other sites

The Turbo speed of 5700 is a bug. I get that here as well even though my Turbo is 3800. Clover bdmesg output shows "Turbo: 33/57/57/57".

 

I can't really think of what might be going wrong. It "just works" here, so I haven't had to dig deeper.

 

Here's my AppleIntelInfo output (from 10.12.2) so you can see how yours should look. Your MSR_PKG_Cx_RESIDENCY entries are all empty.

 


AppleIntelInfo.kext v1.3 Copyright © 2012-2015 Pike R. Alpha. All rights reserved



Settings:

------------------------------------

logMSRs............................: 1

logIGPU............................: 0

logIntelRegs.......................: 1

logCStates.........................: 1

logIPGStyle........................: 1

InitialTSC.........................: 0x60c17e6dd4c

MWAIT C-States.....................: 135456



Model Specific Regiters

------------------------------------

MSR_CORE_THREAD_COUNT......(0x35)  : 0x6000C

MSR_PLATFORM_INFO..........(0xCE)  : 0xC0070012000

MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E000405

MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x10414

IA32_MPERF.................(0xE7)  : 0x16EF982EF2

IA32_APERF.................(0xE8)  : 0x170E704653

MSR_FLEX_RATIO.............(0x194) : 0xE0000

MSR_IA32_PERF_STATUS.......(0x198) : 0x276400002600

MSR_IA32_PERF_CONTROL......(0x199) : 0x2600

IA32_CLOCK_MODULATION......(0x19A) : 0x0

IA32_THERM_STATUS..........(0x19C) : 0x883A0000

IA32_MISC_ENABLES..........(0x1A0) : 0x850089

MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001

MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x2323393939393939

IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0

MSR_POWER_CTL..............(0x1FC) : 0x2504005B

MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003

MSR_PKG_POWER_LIMIT........(0x610) : 0x69F40005A9F40

MSR_PKG_ENERGY_STATUS......(0x611) : 0x1411F8FF

MSR_PKG_POWER_INFO.........(0x614) : 0x1A80410

MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x141494800007F8

MSR_PP0_POWER_LIMIT........(0x638) : 0x0

MSR_PP0_ENERGY_STATUS......(0x639) : 0xD22E0F2

MSR_PP0_POLICY.............(0x63a) : 0x0

MSR_PKGC6_IRTL.............(0x60b) : 0x0

MSR_PKGC7_IRTL.............(0x60c) : 0x0

MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x6FE7EFA60

MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x5D1F360

MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x1A39D48CC0

MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0

IA32_TSC_DEADLINE..........(0x6E0) : 0x60C1CF50C22

PCH device.................: 0x1D418086



CPU Ratio Info:

------------------------------------

CPU Low Frequency Mode.............: 1200 MHz

CPU Maximum non-Turbo Frequency....: 3200 MHz

CPU Maximum Turbo Frequency........: 5700 MHz

CPU P-States [ (12) 31 ]

CPU C3-Cores [ 0 7 11 ]

CPU C6-Cores [ 2 3 4 5 6 7 10 11 ]

CPU C7-Cores [ 2 3 4 5 7 11 ]

CPU P-States [ (12) 22 31 ]

CPU C3-Cores [ 0 5 7 8 11 ]

CPU C6-Cores [ 1 2 3 4 5 6 7 9 10 11 ]

CPU C7-Cores [ 2 3 4 5 7 8 10 11 ]

CPU P-States [ (12) 21 22 31 ]

CPU C3-Cores [ 0 2 5 7 8 11 ]

CPU C6-Cores [ 0 1 2 3 4 5 6 7 9 10 11 ]

CPU C7-Cores [ 0 2 3 4 5 6 7 8 9 10 11 ]

CPU P-States [ (12) 17 21 22 31 ]

CPU C3-Cores [ 0 2 4 5 7 8 11 ]

CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

CPU C7-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

CPU P-States [ (12) 17 18 21 22 31 ]

CPU C3-Cores [ 0 1 2 4 5 7 8 10 11 ]

CPU P-States [ (12) 17 18 21 22 31 34 ]

CPU C3-Cores [ 0 1 2 3 4 5 7 8 10 11 ]

CPU P-States [ (12) 17 18 21 22 31 32 34 ]

CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 10 11 ]

CPU P-States [ (12) 17 18 21 22 23 31 32 34 ]

CPU P-States [ (12) 17 18 21 22 23 30 31 32 34 ]

CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

CPU P-States [ (12) 17 18 21 22 23 28 30 31 32 34 ]

CPU P-States [ (12) 17 18 21 22 23 24 28 30 31 32 34 ]

CPU P-States [ (12) 17 18 21 22 23 24 28 30 31 32 33 34 ]

CPU P-States [ (12) 17 18 21 22 23 24 27 28 30 31 32 33 34 ]

CPU P-States [ (12) 17 18 21 22 23 24 27 28 29 30 31 32 33 34 ]

CPU P-States [ 12 17 18 21 22 23 24 27 28 29 30 31 32 33 34 (38) ]

CPU P-States [ (12) 17 18 21 22 23 24 25 27 28 29 30 31 32 33 34 38 ]

CPU P-States [ (12) 17 18 20 21 22 23 24 25 27 28 29 30 31 32 33 34 38 ]

CPU P-States [ (12) 17 18 20 21 22 23 24 25 27 28 29 30 31 32 33 34 36 38 ]

CPU P-States [ (12) 17 18 20 21 22 23 24 25 27 28 29 30 31 32 33 34 35 36 38 ]

CPU P-States [ (12) 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 38 ]

CPU P-States [ (12) 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 38 ]

CPU P-States [ (12) 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 38 ]

CPU P-States [ (12) 13 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 38 ]

CPU P-States [ (12) 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 38 ]

CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 38 ]

CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 ]



 

 

 

Share this post


Link to post
Share on other sites

Thanks, I checked against mine. My MSR_PKG_Cx_RESIDNECY are all 0x0 - however your's aren't. What is this used for ?

 

Also I seem to have less P & C states than yours, although I do see the lower multiplier in the P states. Any idea why they are repeated multiple times ?

 

Here is mine, I'm not knowledgable enough on this to understand whether the differences are significant or not to the problem

 

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved

 

Settings:

------------------------------------

logMSRs............................: 1

logIGPU............................: 0

logIntelRegs.......................: 1

logCStates.........................: 1

logIPGStyle........................: 1

InitialTSC.........................: 0x162571120270

MWAIT C-States.....................: 135456

 

Model Specific Regiters

------------------------------------

MSR_CORE_THREAD_COUNT......(0x35)  : 0x6000C

MSR_PLATFORM_INFO..........(0xCE)  : 0xC0070012100

MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E008400

MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x20414

IA32_MPERF.................(0xE7)  : 0xF2822DE95B

IA32_APERF.................(0xE8)  : 0x93E137A36B

MSR_FLEX_RATIO.............(0x194) : 0xE2100

MSR_IA32_PERF_STATUS.......(0x198) : 0x27DF00002400

MSR_IA32_PERF_CONTROL......(0x199) : 0x3900

IA32_CLOCK_MODULATION......(0x19A) : 0x0

IA32_THERM_STATUS..........(0x19C) : 0x882B0000

IA32_MISC_ENABLES..........(0x1A0) : 0x850089

MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001

MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x393939393939

IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0

MSR_POWER_CTL..............(0x1FC) : 0x2104005F

MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003

MSR_PKG_POWER_LIMIT........(0x610) : 0x80069F4000149F40

MSR_PKG_ENERGY_STATUS......(0x611) : 0x509D126

MSR_PKG_POWER_INFO.........(0x614) : 0x1A80410

MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x80001FFF

MSR_PP0_POWER_LIMIT........(0x638) : 0x80000000

MSR_PP0_ENERGY_STATUS......(0x639) : 0x846846AD

MSR_PP0_POLICY.............(0x63a) : 0x0

MSR_PKGC6_IRTL.............(0x60b) : 0x8868

MSR_PKGC7_IRTL.............(0x60c) : 0x886D

MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0

MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0

MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0

MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0

IA32_TSC_DEADLINE..........(0x6E0) : 0x16257410192E

PCH device.................: 0x1D418086

 

CPU Ratio Info:

------------------------------------

CPU Low Frequency Mode.............: 1200 MHz

CPU Maximum non-Turbo Frequency....: 3300 MHz

CPU Maximum Turbo Frequency........: 5700 MHz

CPU P-States [ 34 (36) ]

CPU C3-Cores [ 0 4 6 7 8 ]

CPU C6-Cores [ 3 4 6 7 8 9 10 ]

CPU C7-Cores [ 2 3 4 6 7 ]

CPU P-States [ (12) 34 36 ]

CPU C3-Cores [ 0 2 3 4 5 6 7 8 9 ]

CPU C6-Cores [ 3 4 5 6 7 8 9 10 11 ]

CPU C7-Cores [ 2 3 4 6 7 9 11 ]

CPU C6-Cores [ 0 1 3 4 5 6 7 8 9 10 11 ]

CPU C7-Cores [ 0 1 2 3 4 6 7 9 11 ]

CPU P-States [ 12 34 35 (36) ]

CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 11 ]

CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

CPU C7-Cores [ 0 1 2 3 4 6 7 8 9 11 ]

CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

CPU C7-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]

 

CPU P-States [ 12 33 34 35 (36) ]

 

 

Thanks !

Share this post


Link to post
Share on other sites

Unfortunately, I don't know this in-depth enough to be able to troubleshoot why yours isn't working. It just worked for me. But I never overclocked.

 

Assuming you're patching AICPUPM.kext and have a valid SSDT (and are using the X86PlatformPlugin.kext if you're using MacPro6,1) the only other thing I can think of trying is BIOS settings. Maybe reset it to optimized defaults (after making a note of any changes you made so you can put them back if needed). It's possible some overclock-related setting could be messing things up.

Share this post


Link to post
Share on other sites

Really no one can help ?

All computers has a diferent component. For this reason sometimes the guides doesn't works with all configurations. But in this case this guide are working with all hackintosh with Sandy-E or Ivy-E. It is necesary that you follow the guide in all steps. This include patch the AICPM if you are using a Motherboards with a MSR lock it, and MacPro6,1 definition. At the first attemp try without overclok and When you get the speedtep work, then overclok the CPU.

Share this post


Link to post
Share on other sites

Hi, I was running into issues with getting Pstates and turboboost working with a xeon E5 2670 on huanan X79 motherboard. Tried lots of different things but eventually got it working. Had to run the 

10.12 aicpm patch.command.zip and add 10.11 X79PlatformPlugin.kext.zip  as directed  followed by the install.command.zip  had to run a few times to fix all permissions. I then removed all entries of the kext nullcpupowermanagement.kext.

from installation drive and clover kext folder. I removed all entries from acpi section of clover but ticked only drop OEM. The config did not work till i entered bios and reselected default profile for cpu power management with eist enabled.

Benchmarks on geekbench4 now run slightly faster than my linux install. I think the fakeSMC sensors are a bit off as I am consuming slightly less power at idle yet monitor shows slightly higher clock speeds when comparing with linux install. Can also confirm worked on mac-mini 5.1 and mac pro 6.1. But decided to stick with Mac pro as seems to have lower idles.

I did test clover settings and bios settings and pstates were still not working so must be patch and x79 kexts, many  thanks to the providers

Share this post


Link to post
Share on other sites

Hi Stinga ,

 

Did this work with C602 chipset ... I'm working in Z9PA-D8 WS and MSR locked with Bios r5602

Works for you?

Share this post


Link to post
Share on other sites

no , I was try this but nothing happen ... Not work . I think it's because of my bios locked MSR ... 0x1e0008403 and I can't patch it

 

MacPro6,1 - 2 x E5-2670 ..

patched SSDT with ssdtPRGen.sh 

 

U can look my AppleIntelInfo.kext 

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved

Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 0
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0x12655a34fab8
MWAIT C-States.....................: 135456

Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35)  : 0x80010
MSR_PLATFORM_INFO..........(0xCE)  : 0xC0064011A00
MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E008403
MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x10414
IA32_MPERF.................(0xE7)  : 0x5C5A05DFB0
IA32_APERF.................(0xE8)  : 0x5B406A0724
MSR_FLEX_RATIO.............(0x194) : 0x0
MSR_IA32_PERF_STATUS.......(0x198) : 0x217700001A00
MSR_IA32_PERF_CONTROL......(0x199) : 0x1A00
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x88350000
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400000
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1E1E1F1F20202121
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x7
MSR_POWER_CTL..............(0x1FC) : 0x2504005B
MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003
MSR_PKG_POWER_LIMIT........(0x610) : 0x68450005A8398
MSR_PKG_ENERGY_STATUS......(0x611) : 0x26B2754D
MSR_PKG_POWER_INFO.........(0x614) : 0x2F05A001980398
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x141494800007F8
MSR_PP0_POWER_LIMIT........(0x638) : 0x0
MSR_PP0_ENERGY_STATUS......(0x639) : 0x1C86F66A
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_PKGC6_IRTL.............(0x60b) : 0x0
MSR_PKGC7_IRTL.............(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0x126561735D4C
PCH device.................: 0x1D418086

CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 1200 MHz
CPU Maximum non-Turbo Frequency....: 2600 MHz
CPU Maximum Turbo Frequency........: 3300 MHz
CPU P-States [ 25 (26) ]

Share this post


Link to post
Share on other sites

no , I was try this but nothing happen ... Not work . I think it's because of my bios locked MSR ... 0x1e0008403 and I can't patch it

 

MacPro6,1 - 2 x E5-2670 ..

patched SSDT with ssdtPRGen.sh 

 

U can look my AppleIntelInfo.kext 

 

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved

Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 0
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0x12655a34fab8
MWAIT C-States.....................: 135456

Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35)  : 0x80010
MSR_PLATFORM_INFO..........(0xCE)  : 0xC0064011A00
MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E008403
MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x10414
IA32_MPERF.................(0xE7)  : 0x5C5A05DFB0
IA32_APERF.................(0xE8)  : 0x5B406A0724
MSR_FLEX_RATIO.............(0x194) : 0x0
MSR_IA32_PERF_STATUS.......(0x198) : 0x217700001A00
MSR_IA32_PERF_CONTROL......(0x199) : 0x1A00
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x88350000
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400000
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1E1E1F1F20202121
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x7
MSR_POWER_CTL..............(0x1FC) : 0x2504005B
MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003
MSR_PKG_POWER_LIMIT........(0x610) : 0x68450005A8398
MSR_PKG_ENERGY_STATUS......(0x611) : 0x26B2754D
MSR_PKG_POWER_INFO.........(0x614) : 0x2F05A001980398
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x141494800007F8
MSR_PP0_POWER_LIMIT........(0x638) : 0x0
MSR_PP0_ENERGY_STATUS......(0x639) : 0x1C86F66A
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_PKGC6_IRTL.............(0x60b) : 0x0
MSR_PKGC7_IRTL.............(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0x126561735D4C
PCH device.................: 0x1D418086

CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 1200 MHz
CPU Maximum non-Turbo Frequency....: 2600 MHz
CPU Maximum Turbo Frequency........: 3300 MHz
CPU P-States [ 25 (26) ]
Send me your DSDT and all SSDT

Share this post


Link to post
Share on other sites

thanks you very much !

 

Will I place this dsdt.aml file to patched folder ?

 

It's Worked ... Thanks you so much ... u are hero of my life 

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved

Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 0
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0x64e516e95f1c
MWAIT C-States.....................: 135456

Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35)  : 0x80010
MSR_PLATFORM_INFO..........(0xCE)  : 0xC0064011A00
MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E008403
MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x10414
IA32_MPERF.................(0xE7)  : 0x2951AB5A48
IA32_APERF.................(0xE8)  : 0x267B3471EE
MSR_FLEX_RATIO.............(0x194) : 0x0
MSR_IA32_PERF_STATUS.......(0x198) : 0x23B500002100
MSR_IA32_PERF_CONTROL......(0x199) : 0x2100
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x883A0000
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1E1E1F1F20202121
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0
MSR_POWER_CTL..............(0x1FC) : 0x2504005B
MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003
MSR_PKG_POWER_LIMIT........(0x610) : 0x68450005A8398
MSR_PKG_ENERGY_STATUS......(0x611) : 0x104645F3
MSR_PKG_POWER_INFO.........(0x614) : 0x2F05A001980398
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x141494800007F8
MSR_PP0_POWER_LIMIT........(0x638) : 0x0
MSR_PP0_ENERGY_STATUS......(0x639) : 0xBB1FEB4
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_PKGC6_IRTL.............(0x60b) : 0x0
MSR_PKGC7_IRTL.............(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x8886938EA
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x5B342BE
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x21667CD10
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0x64E51CF1C881
PCH device.................: 0x1D418086

CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 1200 MHz
CPU Maximum non-Turbo Frequency....: 2600 MHz
CPU Maximum Turbo Frequency........: 3300 MHz
CPU P-States [ (12) 25 32 ]
CPU C3-Cores [ 0 8 12 13 ]
CPU C6-Cores [ 0 1 6 13 14 15 ]
CPU C7-Cores [ 1 4 ]
CPU P-States [ (12) 24 25 32 ]
CPU C3-Cores [ 0 5 7 8 12 13 ]
CPU C6-Cores [ 0 1 6 13 14 15 ]
CPU C7-Cores [ 1 4 5 6 16 ]
CPU P-States [ (12) 24 25 29 32 ]
CPU C3-Cores [ 0 5 7 8 10 12 13 15 ]
CPU C6-Cores [ 0 1 6 8 13 14 15 ]
CPU C7-Cores [ 1 4 5 6 16 ]
CPU P-States [ (12) 24 25 28 29 32 ]
CPU C3-Cores [ 0 2 3 5 7 8 10 12 13 14 15 ]
CPU C6-Cores [ 0 1 6 7 8 13 14 15 ]
CPU C7-Cores [ 1 3 4 5 6 11 15 16 ]
CPU P-States [ (12) 23 24 25 28 29 32 ]
CPU C3-Cores [ 0 2 3 5 7 8 10 12 13 14 15 ]
CPU C6-Cores [ 0 1 6 7 8 9 13 14 15 ]
CPU C7-Cores [ 1 3 4 5 6 10 11 13 15 16 ]
CPU P-States [ 12 23 24 25 26 28 29 (32) ]
CPU C3-Cores [ 0 2 3 5 6 7 8 9 10 12 13 14 15 ]
CPU C7-Cores [ 1 2 3 4 5 6 10 11 13 14 15 16 ]
CPU P-States [ 12 23 24 25 26 27 28 29 32 (33) ]
CPU C6-Cores [ 0 1 6 7 8 9 13 14 15 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 10 11 13 14 15 16 ]
CPU C3-Cores [ 0 1 2 3 5 6 7 8 9 10 12 13 14 15 ]
CPU C6-Cores [ 0 1 3 6 7 8 9 13 14 15 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 10 11 13 14 15 16 ]
CPU C3-Cores [ 0 1 2 3 5 6 7 8 9 10 12 13 14 15 ]
CPU C6-Cores [ 0 1 3 4 6 7 8 9 13 14 15 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 8 10 11 13 14 15 16 ]
CPU C3-Cores [ 0 1 2 3 5 6 7 8 9 10 12 13 14 15 ]
CPU C6-Cores [ 0 1 3 4 6 7 8 9 10 11 13 14 15 ]
CPU C6-Cores [ 0 1 3 4 5 6 7 8 9 10 11 13 14 15 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 ]
CPU C6-Cores [ 0 1 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
CPU P-States [ (12) 23 24 25 26 27 28 29 30 32 33 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ]
CPU P-States [ (12) 22 23 24 25 26 27 28 29 30 32 33 ]

Share this post


Link to post
Share on other sites

 

thanks you very much !

 

Will I place this dsdt.aml file to patched folder ?

 

It's Worked ... Thanks you so much ... u are hero of my life 

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved

Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 0
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0x64e516e95f1c
MWAIT C-States.....................: 135456

Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35)  : 0x80010
MSR_PLATFORM_INFO..........(0xCE)  : 0xC0064011A00
MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E008403
MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x10414
IA32_MPERF.................(0xE7)  : 0x2951AB5A48
IA32_APERF.................(0xE8)  : 0x267B3471EE
MSR_FLEX_RATIO.............(0x194) : 0x0
MSR_IA32_PERF_STATUS.......(0x198) : 0x23B500002100
MSR_IA32_PERF_CONTROL......(0x199) : 0x2100
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x883A0000
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1E1E1F1F20202121
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0
MSR_POWER_CTL..............(0x1FC) : 0x2504005B
MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003
MSR_PKG_POWER_LIMIT........(0x610) : 0x68450005A8398
MSR_PKG_ENERGY_STATUS......(0x611) : 0x104645F3
MSR_PKG_POWER_INFO.........(0x614) : 0x2F05A001980398
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x141494800007F8
MSR_PP0_POWER_LIMIT........(0x638) : 0x0
MSR_PP0_ENERGY_STATUS......(0x639) : 0xBB1FEB4
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_PKGC6_IRTL.............(0x60b) : 0x0
MSR_PKGC7_IRTL.............(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x8886938EA
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x5B342BE
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x21667CD10
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0x64E51CF1C881
PCH device.................: 0x1D418086

CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 1200 MHz
CPU Maximum non-Turbo Frequency....: 2600 MHz
CPU Maximum Turbo Frequency........: 3300 MHz
CPU P-States [ (12) 25 32 ]
CPU C3-Cores [ 0 8 12 13 ]
CPU C6-Cores [ 0 1 6 13 14 15 ]
CPU C7-Cores [ 1 4 ]
CPU P-States [ (12) 24 25 32 ]
CPU C3-Cores [ 0 5 7 8 12 13 ]
CPU C6-Cores [ 0 1 6 13 14 15 ]
CPU C7-Cores [ 1 4 5 6 16 ]
CPU P-States [ (12) 24 25 29 32 ]
CPU C3-Cores [ 0 5 7 8 10 12 13 15 ]
CPU C6-Cores [ 0 1 6 8 13 14 15 ]
CPU C7-Cores [ 1 4 5 6 16 ]
CPU P-States [ (12) 24 25 28 29 32 ]
CPU C3-Cores [ 0 2 3 5 7 8 10 12 13 14 15 ]
CPU C6-Cores [ 0 1 6 7 8 13 14 15 ]
CPU C7-Cores [ 1 3 4 5 6 11 15 16 ]
CPU P-States [ (12) 23 24 25 28 29 32 ]
CPU C3-Cores [ 0 2 3 5 7 8 10 12 13 14 15 ]
CPU C6-Cores [ 0 1 6 7 8 9 13 14 15 ]
CPU C7-Cores [ 1 3 4 5 6 10 11 13 15 16 ]
CPU P-States [ 12 23 24 25 26 28 29 (32) ]
CPU C3-Cores [ 0 2 3 5 6 7 8 9 10 12 13 14 15 ]
CPU C7-Cores [ 1 2 3 4 5 6 10 11 13 14 15 16 ]
CPU P-States [ 12 23 24 25 26 27 28 29 32 (33) ]
CPU C6-Cores [ 0 1 6 7 8 9 13 14 15 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 10 11 13 14 15 16 ]
CPU C3-Cores [ 0 1 2 3 5 6 7 8 9 10 12 13 14 15 ]
CPU C6-Cores [ 0 1 3 6 7 8 9 13 14 15 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 10 11 13 14 15 16 ]
CPU C3-Cores [ 0 1 2 3 5 6 7 8 9 10 12 13 14 15 ]
CPU C6-Cores [ 0 1 3 4 6 7 8 9 13 14 15 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 8 10 11 13 14 15 16 ]
CPU C3-Cores [ 0 1 2 3 5 6 7 8 9 10 12 13 14 15 ]
CPU C6-Cores [ 0 1 3 4 6 7 8 9 10 11 13 14 15 ]
CPU C6-Cores [ 0 1 3 4 5 6 7 8 9 10 11 13 14 15 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 ]
CPU C6-Cores [ 0 1 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
CPU P-States [ (12) 23 24 25 26 27 28 29 30 32 33 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ]
CPU P-States [ (12) 22 23 24 25 26 27 28 29 30 32 33 ]

Remember if your board has MSRxE2 Locked you need this patch:

http://olarila.com/forum/viewtopic.php?f=9&t=1003

 

And dont forgot use thist kext

http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=243855

Share this post


Link to post
Share on other sites

Remember if your board has MSRxE2 Locked you need this patch:

http://olarila.com/forum/viewtopic.php?f=9&t=1003

 

And dont forgot use thist kext

http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=243855

 

I already try this olarina patch but when I see MSRxE2 is 0x1E0008403 is still locked ...

 

I will replace your recommended kext with x79platformplugin.kext .

 

Thanks u very much ! 

 

Now I trying to fix for Nvidia web driver 

Share this post


Link to post
Share on other sites

Hi Stinga ....

 

 I don't know why my computer look like not load LegacyX86Platform.kext ... I check with Kext Wizard and Boot.log ... placed to kexts or /Library/Extensions but still not detect and load ...

 

Please help me 

Share this post


Link to post
Share on other sites

I already try this olarina patch but when I see MSRxE2 is 0x1E0008403 is still locked ...

 

Would patching the BIOS on your motherboard help?

 

Some clues here.

 

http://www.insanelymac.com/forum/topic/285444-uefipatch-uefi-patching-utility/page-1

 

https://hardforum.com/threads/tools-to-flash-and-recover-bios-on-asus-p8xxx-boards-fd44editor-ftk.1726429/

 

http://www.win-raid.com/t455f16-Guide-How-to-flash-a-modded-ASUS-ASRock-Gigabyte-AMI-UEFI-BIOS.html

 

Related: (Shows steps, but for VERY different method):

 

http://www.insanelymac.com/forum/topic/306744-ozmosis-uefi-bios-modding-guide/page-1

 

 

NB. I do NOT have an X79 board.

 

Stinga can advise if what I have suggested is useful, or not?

 

Obviously, its downright dangerous  :worried_anim:

Share this post


Link to post
Share on other sites

Hi @stinga11 ,

 

it's look like my computer load ACPI_SMC_Platformplugin.kext and not load X86PlatformPlugin.kext .

so your LegacyX86PlatformPlugin.kext not load ... 

 

Is this problem ?

 

Thanks .

Share this post


Link to post
Share on other sites

Hi @stinga11 ,

 

it's look like my computer load ACPI_SMC_Platformplugin.kext and not load X86PlatformPlugin.kext .

so your LegacyX86PlatformPlugin.kext not load ... 

 

Is this problem ?

 

Thanks .

what smbios you use?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×