Jump to content
Mr. Xtreme

[AMD] macOS 10.12.x (Sierra) Kernel Testing & Release (for help use the Help Topic)

787 posts in this topic

Recommended Posts

 

@ LordSith82 
try with the standard method. bring the folder S/L/E in the original state and add there only the USB Dummies Kext divers then generate the prelinked kernel and reports whether it works or not.

 

 

 

Ops... :) I don't have original kext...

Can you give me it?

 

Thank you.

Share this post


Link to post
Share on other sites
Advertisement
Hello everyone, I need some help.

 

AMD FX 6300

Asus M5A97 EVO R2.0

ATI HD 5750 1GB

GK 4GB x2 - 1600 DDR3

Wireless Network Adapter (802.11 a/b/g/n/ac) PCIe BCM4352 AW-CE123H AzureWave.

 

I created the usb with Sierra 10.12.5, I get it installed, on the first reboot, it does not boot.

 

 

Information:

 

USB 10.12.5 con Enoch rev2839, Kernel, Sytem.kext, Shaneee's Sierra USB Fix, PlatformSupport.plist 

 

Extra/ Extensions= AHCIPortInjector +FakeSMC+NullCPUPowerManagement

Share this post


Link to post
Share on other sites

Can someone test this please :)

This kernel can not boot to desktop in my Phenom II x6 1405T hackintosh because of KP at:

The signature could not be validated because AMFI could not load its entitlements for validation ......

That is exactly the same error as spakk's Post #41:

http://www.insanelymac.com/forum/topic/322370-task-force-amd-to-missing-sse41-instruction-set-older-cpus-on-macos-sierra-1012x/page-3

Share this post


Link to post
Share on other sites

Would like only yo know if i can install osx on fx 6300 and rx 460 

Thanks 

Yes, you can install 10.12.x in FX-6300 hackintosh with Bronya's kernel.

RX-460 not sure because no actual experience for this model, but AMD 7950 or R9 290X was working.

Share this post


Link to post
Share on other sites

Good 10.12.5

 

 

 

Try updating 10.12.6

I updated fine to 10.12.6. Used your "Fix Carlo_67" files and all is working normal for me. I use USBv3 Fix for El captian to get my USB working properly. Machine is smooth as butter :)

post-1420666-0-99298300-1500838084_thumb.png

Share this post


Link to post
Share on other sites

Fix Carlo 67 works fine for the amd fx 8300 and asrock 990fx.

USB port all only go with clover nothing with enoch. Am very positive surprised.

The system working without Problems... in moment :-)

Sierra 10.12.6 no upgrade make now. Thanks to the Kernel Developer.

Only Standby sometimes not wakeup unhappy.

 

Greetings

Share this post


Link to post
Share on other sites

Good for your kernel and System.kext for 10.12.5

Works well, using Clover

:yes:  :yes:

After I try 10.12.6

 

 

Will it work on FX8350 and R9 380?

Share this post


Link to post
Share on other sites

Installed on 10.12.6

With combined update 10.12.6
After installing kernel, and System.kext. Repair permissions and caches
Restart insert in bootarg -f, only for the first boot
Boom :thumbsup_anim:
  :thumbsup_anim:  :wink_anim:

Schermata 2017-07-30 alle 18.38.44.png

Share this post


Link to post
Share on other sites

Installed on 10.12.6

With combined update 10.12.6

After installing kernel, and System.kext. Repair permissions and caches

Restart insert in bootarg -f, only for the first boot

Boom :thumbsup_anim:  :thumbsup_anim:  :wink_anim:

 

I already changed the kernel file and system.kext.
 
Now about repair permission and cache, in which is it?

Share this post


Link to post
Share on other sites

 

I already changed the kernel file and system.kext.
 
Now about repair permission and cache, in which is it?

 

 

You can use Kext Wizard to do it.

Share this post


Link to post
Share on other sites

 

I already changed the kernel file and system.kext.
 
Now about repair permission and cache, in which is it?

 

sudo chown -R 0:0 /System/Library/Extensions

sudo touch /System/Library/Extensions && sudo kextcache -u /

Share this post


Link to post
Share on other sites

sudo chown -R 0:0 /System/Library/Extensions

sudo touch /System/Library/Extensions && sudo kextcache -u /

 

How do I do this in Windows?

Share this post


Link to post
Share on other sites

Hi!

 

...Im clean install 10.12.6 used Fix Carlo_67, system work fine but the graphics are not good for something...

...i use HD 5770 (OOB) (because R7 360 is not working my system) works great in 10.12.3, but 10.12.6 glich... ... the screan flashes and changes color...

(...sorry for my (very) bad english)

 

post-697722-0-22818900-1502051471_thumb.jpg

post-697722-0-35623900-1502051487_thumb.jpg

Share this post


Link to post
Share on other sites

Hi!

 

...Im clean install 10.12.6 used Fix Carlo_67, system work fine but the graphics are not good for something...

...i use HD 5770 (OOB) (because R7 360 is not working my system) works great in 10.12.3, but 10.12.6 glich... ... the screan flashes and changes color...

(...sorry for my (very) bad english)

Use switchresx 4 to change colors from billions to millions can fix this issue of AMD 5770/6870 cards.

Share this post


Link to post
Share on other sites

Use switchresx 4 to change colors from billions to millions can fix this issue of AMD 5770/6870 cards.

Yesss! work! Perfect!!!

Thank you!

Share this post


Link to post
Share on other sites

Hey!

 

just used the fix from Carlos - boot into the installer and type in the args Carlos type in his post. The installation writes on black background and white font many things and on the end "PCI configiration begins" after that line there is a message of the ram single bank - here the installer stops, after 30sec the pc shut down.

 

Can anyone help?

 

CPU: FX 8320 Eight core

Board: MSI 970 Gaming

Share this post


Link to post
Share on other sites

Hey!

 

just used the fix from Carlos - boot into the installer and type in the args Carlos type in his post. The installation writes on black background and white font many things and on the end "PCI configiration begins" after that line there is a message of the ram single bank - here the installer stops, after 30sec the pc shut down.

 

Can anyone help?

 

CPU: FX 8320 Eight core

Board: MSI 970 Gaming

If the system stops at "PCI configilation begins" then one of these bootflags is missing: npci=0x2000 or npci=0x3000

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×