Jump to content
fantomas

Nvidia Web Driver updates for macOS Sierra (UPDATE Sept 27, 2019)

1,063 posts in this topic

Recommended Posts

Hi InsanelyMacaholics    :)


Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.

 

10.12.6

Nvidia Web Driver - 378.05.05.25f19 --> build 16G2136 (thanks to BreBo) New!

Nvidia Web Driver - 378.05.05.25f18 --> build 16G2028 (thanks to Riley Freeman)

Nvidia Web Driver - 378.05.05.25f16 --> build 16G2016 (thanks to Cyberdevs)

Nvidia Web Driver - 378.05.05.25f15 --> build 16G1918 (thanks to BreBo)

Nvidia Web Driver - 378.05.05.25f14 --> build 16G1917 (thanks to BreBo)

Nvidia Web Driver - 378.05.05.25f13 --> build 16G1815 (thanks to flowrider)

Nvidia Web Driver - 378.05.05.25f12 --> build 16G1710 (thanks to BreBo)

Nvidia Web Driver - 378.05.05.25f11 --> build 16G1618 (thanks to Frank Nitty)

Nvidia Web Driver - 378.05.05.25f10 --> build 16G1510 (thanks to BreBo

Nvidia Web Driver - 378.05.05.25f09 --> build 16G1408 (thanks to BreBo)

Nvidia Web Driver - 378.05.05.25f08 --> build 16G1314 (thanks to BreBo)

Nvidia Web Driver - 378.05.05.25f07 --> build 16G1314 (thanks to haring)

Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)

Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)

Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)

Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)

 


 

10.12.5

Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)

 


 

10.12.4

Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)

Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr Pascal support!!!

Nvidia Web Driver - 367.15.10.45f01 --> build 16E195 (thanks to Lanc)

 


 

10.12.3

Nvidia Web Driver - 367.15.10.35f01 --> build 16D32 (thanks to shatterhenner)

 


 

10.12.2

Nvidia Web Driver - 367.15.10.25f02 --> build 16C68 (see this post)

Nvidia Web Driver - 367.15.10.25f01 --> build 16C67 (see this post)

Nvidia Web Driver - 367.15.10.25b06 --> build 16C60b/16C63a (see this post)

 


 

10.12.1

Nvidia Web Driver - 367.15.10.15f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).

Nvidia Web Driver - 367.15.10.15f01 --> build 16B2555 (thanks to Moviemakergr)

 


 

10.12.0

Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)

 


 

GM

Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)

Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)

Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)

 


 

DP/PB

Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)

Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)

Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)

Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)

Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)

Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)

Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun

Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)

Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)

 


Edited by fantomas1
added Nvidia Web Driver 378.05.05.25f19 for macOS 10.12.6 build 16G2136

Share this post


Link to post
Share on other sites
Advertisement

Cut the jobs inside Nvidia,only around 20 engineers for Mac OS X or macOS drivers.

Not expecting too much about the drivers,which full of bugs already.

Most probably Apple would take more AMD graphics. 

Share this post


Link to post
Share on other sites

 

Did somebody try 346.03.15b01 web driver with macOS Sierra?  :)

<key>NVDARequiredOS</key>
<string>16A</string>

 

can i try using the web drivers of 10.11.6 with sierra?how should i use the above string you have written?

Share this post


Link to post
Share on other sites

Edit Info.plist in NVDAStartupWeb.kext manually or with Nvidia WebDriver Updater app - Boot with nvda_drv=1

 

No guarantee it will work but good luck.   ;)

Share this post


Link to post
Share on other sites

thx fantomas....i will try probably tomorrow and post the results :) 

Share this post


Link to post
Share on other sites

I checked inside the .pkg and it doesn't seem to contain support for Pascal cards.

Can anyone with a Pascal card confirm that these drivers don't work yet?

Share this post


Link to post
Share on other sites

I've just tried to boot with Sierra and this new driver. Unfortunately it won't work with my GTX 950.

 

If I go into terminal, and type this I get an error:

 

Mac-Pro-Server:~ me$ sudo nvram boot-args="nvda_drv=1"

Password:

nvram: Error setting variable - 'boot-args': (iokit/common) general error

Mac-Pro-Server:~ me$ 

 

So close yet so far :)


Does anyone have a contact at NVIDIA for the web driver?  It clearly needs fixing as it just doesn't work with Sierra GTX950 - in fact, whilst the card is in my machine, it won't even boot! It gets caught in a kernel panic loop.

Share this post


Link to post
Share on other sites

Works great here ! :thumbsup_anim:

 

 

What Mac Pro are you running?...  actually, looks like you are running a hackintosh... 

 

I'm actually trying to get it to work in a MacPro3,1. 

Share this post


Link to post
Share on other sites

What Mac Pro are you running?...  actually, looks like you are running a hackintosh...

Of course I am ! It's a Hackintosh forum here :P. But FYI I use an iMac13,2 SMBios.

 

I'm actually trying to get it to work in a MacPro3,1.

What are you trying to do actually ? Install macOS Sierra on a MacPro3,1 or NVIDIA Webdrivers ? If the package refuse to install them, then you should try NVIDIA® WebDriver Updater.app 1.4.

Share this post


Link to post
Share on other sites

I have Sierra running on my MacPro3,1 - had to hack it to do so. I have installed the beta driver for Sierra and it installed successfully. However, when I try and boot with my GTX950 card, it won't boot, it crashes, and loops. This didn't happen in el capitan and the drivers for that OS. Therefore, I suspect the driver isn't working properly yet - it clearly works in a PC hackintosh environment (well, at least for you which is great) but not in the Mac Pro world yet.

Share this post


Link to post
Share on other sites

Someone with GTX 10x0 to try the pascal GPU with these drivers ?

 

I had a quick look to the PKG contents, and I don't think it is gonna work.

There are 3 kexts:

 - GF100

 - GK100

 - GM100

Share this post


Link to post
Share on other sites

I'm having problems getting my GTX 980TI working correctly on 10.12.

 

I'm getting that dreaded "black screen" bug.

 

I have already modified AppleGraphicsDevicePolicy.kext setting Mac-65CE76090165799A to none.

 

It kind of seems like the kernel cache is not "sticking", as I'm able to boot up with nv_disable=1, rebuild the kernel cache (sudo kextcache -system-prelinked-kernel & sudo kextcache -system-caches), reboot.

 

This makes the "black screen" bug go away, but only for a few restarts.

 

Anyone who have experienced this?

Share this post


Link to post
Share on other sites

I'm having problems getting my GTX 980TI working correctly on 10.12.

 

I'm getting that dreaded "black screen" bug.

 

I have already modified AppleGraphicsDevicePolicy.kext setting Mac-65CE76090165799A to none.

 

It kind of seems like the kernel cache is not "sticking", as I'm able to boot up with nv_disable=1, rebuild the kernel cache (sudo kextcache -system-prelinked-kernel & sudo kextcache -system-caches), reboot.

 

This makes the "black screen" bug go away, but only for a few restarts.

 

Anyone who have experienced this?

Same thing here. I'm trying the commands to rebuild kernel cache. Seems like it didn't work. Time for El Capitan I guess! 

Share this post


Link to post
Share on other sites

Everything is working fine with nonEFI Quadro k2200 except CUDA / I installed 7.5.29 but no App sees CUDA anyone a link for CUDA 8.0 for OS X or any Beta for Sierra ???

 

 

***Update***

 

Still after Update 7.5.30 fails to show up in Apps too

Share this post


Link to post
Share on other sites

Hello guys,

 

Anyone managed to get this to work on a GTX 950? I'm getting a black screen when loading second stage boot. And...nothing else.

I suppose it's an issue with the driver? Is there a known solution to this? Or should we just wait for the next driver update?

Share this post


Link to post
Share on other sites

Hello guys,

 

Anyone managed to get this to work on a GTX 950? I'm getting a black screen on when loading second stage boot. And...nothing else.

I suppose it's an issue with the driver? Is there a known solution to this? Or should we just wait for the next deriver update?

 

Yes, I got it working with the GTX 950 - I am using a Mac Pro with the web driver. So if it was an issue with the web driver, it wouldn't have worked for me as the only way to get it to work in OSX is the web driver.

Share this post


Link to post
Share on other sites

Works good here with GTX970 Gainward Phantom and beta webdriver.

Tested with Geekbench and Cinebench R15.

Only de singlecore results are 15 % lower than with 10.11.5 !

 

post-305243-0-08605400-1466258742_thumb.png      post-305243-0-78685300-1466258772_thumb.png  
 
 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Kaku
      Greetings!
       
      So I managed to get a Catalina 10.15 vm up and running in ESXi 6.7u2.
      When I try to install Catalina updates, however, it goes to the Apple logo, status bar moving ever so slightly, reboots again and this time hangs on the Apple logo.  To fix this, I either remove or disable "Mac OS" as an option in the bootloader. Is there a way to get these updates to install? 
       
      In the meantime...
       
      I instead of restarting Catalina after choosing to update it, I shutdown the guest.  After a restart it SEEMED to update with the time duration countdown.
       
      Prior to this I did run disk utility and checked Untitled and Untitled-Data for errors (I don't think it found any).
       
      So I just logged back onto the VM and the version is still 10.15 and NOT 10.15.2 as hoped. So weird.
       
      Any ideas?
       
    • By t3s8r8
      Hi, anyone here got those problems like me ? When I click play, the film load nothing, just show blackscreen like this (attached) or when I download an episode to the computer, it shows error (err = -11800)

      Anyone here knows a fix ? Maybe a bug or problem from Hackintosh ?


    • By rguibi
      Hello

      I have a laptop HP EliteBook 840 G2 - Core i5 5300U - 2.3 GHz and graphic card intel HD5500 and installed a SIERRA , but the definition of the graphics card is not installed
    • By kushwavez
      Acer Aspire V15 V5-591G - Catalina 10.15.1
      This post will no longer updated, go for the osxlatitude link for further updates
      Original and updated link:
      https://osxlatitude.com/forums/topic/11355-acer-aspire-v-15-v5-591g-catalina-windows-10/
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      - Motherboard: USOPP_SLS (Skylake-H PCH)
      - BIOS: Insyde Corp. v 1.15
      - CPU: Intel Core i5-6300HQ 2.3 GHz (Skylake)
      - GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530
      - RAM: SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz
      - WiFi + Bluetooth: Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth)
      - Audio: Realtek HD Audio: ALC 255 
      - Ethernet: Realtek RTL8168/8111
      - Card Reader: Realtek USB 2.0 Card Reader (USB2.0-CRW)
      - Webcam: HD Webcam
      - HDD: TOSHIBA MQ01ACF032 320 GB HDD
      - SSD: SPCC M.2 230 GB SSD
      - Display: 1366x768 (15.6", Matte)
      - Battery: 6 cell 56Wh / 5040mAh
      - Connectors: 
      1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad: Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard.
      Working:  
      - Wi-Fi (with BCM94352Z)
      - Bluetooth hand-off (With BCM94352Z)
      - Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile)
      - Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color)
      - HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch
      - Audio (ALC 255): (Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17)
      - Ethernet Realtek 8168/8111: RealtekRTL8111.kext
      - App Store, Messages, FaceTime, Siri, iCloud (native)
      - Integrated webcam (native)
      - 3.0 USB (native)
      - Touchpad and Keyboard (ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers
      - Battery info: Install ACPIBatteryManager.kext with Kext Utility or other installer.
      - Sleep Mode
      - SSD with TRIM enabled (to enable trim, open Terminal and write "sudo trimforce enable")
      Not working:
      - Original Wi-Fi (Qualcomm Atheros QCNFA344A):  unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle.
      - NVIDIA GeForce GTX 950M: Optimus not supported.
      - Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: "USB2.0-CRW" Prod ID: "0x0129" Ven ID: "0x0bda  (Realtek Semiconductor Corp.)"
      For Wi-Fi:
      - 1st method: You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it
      - 2nd and I think the best method: Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon
       
      Issues:
      - None
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode: UEFI
      Getting ready for Installation:
      - Download the Catalina install zip (bootpack & postinstall): acer_aspire_V591G-55TU_cata.zip
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.cfg" -> you'll have more informations about the freeze
       
      Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation!
      On Catalina the System folder is read-only, so you need to remount in rw to modify System/Library. 
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict>  
      PowerManagement  fix:
      Set HWPEnable=YES in Clover (already set), CPUFloor to "700", Frequency to "2300" and "3200"(Normal and Turbo, if you have i7-6700HQ version then it should be "2600", "3500") and "FrequencyVectors" from "0x0d000000" to "0x07000000" in "S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist", MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change "MatchOS" to 10.13):

      <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows.
       

      Elan SmartTouchpad
      I only use scrolling, one-, double- & tripletap
      If you want to try other gestures go to this link for more informations, options (v4.6.5) ->  DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES
      Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling).
       
       
      Before updating to a new version of Catalina please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
       
      Catalina & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      Dual-boot with Windows installed first (on one drive), UEFI Only:
      If you already have Windows and you don't want to lose all your data there is a hope:
      I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI
      You need bootable Mac Installer and a full system restore image (link is in my video's description).
      (You may see errors if your EFI partition is not 200 MB)
       Boot into your Windows, resize your partition or create one for Mac.  Boot into your Mac installer and in Disk Utility format the partition you created.  Restore from image: select your full system restore image.  When it's finished restoring you just need to restart, then boot to the system with your usb.  When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart.  Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       7.  You're done! You can select your old Windows and your new macOS!
      (Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
       
      IF YOU GETTING ERRORS DURING MAC RESTORE:
      - Make sure you have partitions in GPT
      - Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors.
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      - Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)
       
      IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      - It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem)
      - You also could "mount" the EFI from Windows:
      1st method: open cmd in administrator mode and type:
      diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition) Open Explorer++ or TotalCommander in administrator mode to manage EFI remove letter=b (This will "unmount" your EFI) 2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI) Open Explorer++ or TotalCommander in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI) Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)!
      Notes:
      2019.11.03: Enabled SIP caused a lots of issues so now it's disabled -> updated bootpack
      2019.11.02: Updated to 10.15.1 -> no problem when/after installing
      2019.10.09: Installed macOS Catalina 10.15 -> Updated Clover, kexts & config.plist -> no problem so far
      2019.08.18: Updated to 10.14.6 -> no problem when/after installing
      2019.06.01: Updated to 10.14.5 -> no problem when/after installing
      2019.04.25: Optimized touchpad scrolling -> updated install files
      2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack
      2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack.
      2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack. 
      2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" -> fixed freezing during boot. Fixed brightness levels by installing "AppleBacklightFixup.kext". Also updated bootpack & postinstall zip down in attachments.
      2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments "acer_aspire_v591g-55tu_clover.zip" -> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes).
      2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why)
      2018.12.09: Updated to 10.14.2 -> did without any complication
      2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext
      2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by "AppleIntelSKLGraphicsFramebuffer.kext" rollback from 10.14.
      2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding "AppleGraphicsDevicePolicy.kext" patches to config.plist, HDMI audio not working
    • By fusion71au
      Clover r5101 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r5101 for VMware.zip". Mount Clover-v2.5k-5101-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
×