Jump to content
fantomas

Nvidia Web Driver updates for macOS Sierra (UPDATE Sept 27, 2019)

1,063 posts in this topic

Recommended Posts

Try using another OSes which has Pascal support, if it works just OK then there's nothing wrong with ur card.  :)

FYi, my GT 520M also got black screen issue after wake from sleep under Sierra.

 

My Windows 10 for gaming works flawlessly with two DP (TV + Monitor)

 

Yes, there's a few threads in the graphics card section

 

I'll check them out, thanks.

Share this post


Link to post
Share on other sites
Advertisement

hi guys. strange problem here. I had this issue even with my old build, z170 + 6700k + 980 ti (with Sierra Mac OS)

now I am on z270, 7700k, gtx 1080 and obviously Sierra.

I have a 4k monitor connected to display port and a epson projector connected to hdmi port. as soon as I turn on the projector, I have a black screen in both "monitors" and I have to reset my hack.

the only way to have both monitor and projector working is this:

-first turn on projector

-then turn on hackintosh

 

when I have black screen I tried to unplug and re plug display port and hdmi cable, but this is not working.

in other threads I remember that a possible fix was to enable csm in bios. I tried it but it didn't help.

 

is someone here who can help me?

thank you

 

 

I'm using iMac 17,1 smbios with lilu + Nvidiagraphicsfixup.

same situation using iMac 14,2

Share this post


Link to post
Share on other sites

hi guys. strange problem here. I had this issue even with my old build, z170 + 6700k + 980 ti (with Sierra Mac OS)

now I am on z270, 7700k, gtx 1080 and obviously Sierra.

I have a 4k monitor connected to display port and a epson projector connected to hdmi port. as soon as I turn on the projector, I have a black screen in both "monitors" and I have to reset my hack.

the only way to have both monitor and projector working is this:

-first turn on projector

-then turn on hackintosh

 

when I have black screen I tried to unplug and re plug display port and hdmi cable, but this is not working.

in other threads I remember that a possible fix was to enable csm in bios. I tried it but it didn't help.

 

is someone here who can help me?

thank you

 

 

I'm using iMac 17,1 smbios with lilu + Nvidiagraphicsfixup.

same situation using iMac 14,2

 

http://www.insanelymac.com/forum/topic/322896-dual-monitors-and-pascal/

 

Yes, there's a few threads in the graphics card section

Share this post


Link to post
Share on other sites

MacPro6,1

nvda_drv=1

NvidiaWeb=1

Lilu+nvidiagraphicsfixup+agdpfixv1.3

 

And a blank screen on boot. Any ideas?

 

 

This is after disabling nvida on boot:

8239036d.png

Share this post


Link to post
Share on other sites

test it

attachicon.gifconfig.plist.zip

 

btw, the best for u is iMac14,2

I originally had a iMac14,2 but was switching around to see if that helped.

 

Unfortunately the config.plist you posted doesn't help :/

Still get a blank screen, and only 1 of my 3 monitors. 

Share this post


Link to post
Share on other sites

I originally had a iMac14,2 but was switching around to see if that helped.

 

Unfortunately the config.plist you posted doesn't help :/

Still get a blank screen, and only 1 of my 3 monitors. 

I fixed this using injection on my 1080, like so: http://www.insanelymac.com/forum/topic/322896-dual-monitors-and-pascal/?p=2411729

Share this post


Link to post
Share on other sites

hi guys. strange problem here. I had this issue even with my old build, z170 + 6700k + 980 ti (with Sierra Mac OS)

now I am on z270, 7700k, gtx 1080 and obviously Sierra.

I have a 4k monitor connected to display port and a epson projector connected to hdmi port. as soon as I turn on the projector, I have a black screen in both "monitors" and I have to reset my hack.

the only way to have both monitor and projector working is this:

-first turn on projector

-then turn on hackintosh

 

when I have black screen I tried to unplug and re plug display port and hdmi cable, but this is not working.

in other threads I remember that a possible fix was to enable csm in bios. I tried it but it didn't help.

 

is someone here who can help me?

thank you

 

 

I'm using iMac 17,1 smbios with lilu + Nvidiagraphicsfixup.

same situation using iMac 14,2

 

solution, in my case, found.

i have to turn on my projector with cable pulled off from my hack. when the projector is on, I can plug it into my hdmi port and everything is working.

if I turn on projector with cable connected, I have black screen to both my monitor and my projector.

hope it helps.

Share this post


Link to post
Share on other sites

Issues with underscan when trying to run at my monitor's native resolution of: 3440 x 1440 @ 100hz, via displayport. Screen is underscaled, running with black borders.

 

System:

Gigabyte Aorus Z270X Gaming 7

Intel Core i7 i7700K

Gigabyte Aorus GTX 1080ti Xtreme

 

I had previously had a working build by installing the latest NVIDIA web drivers, and the 3440x1440 and 100hz options showed up, and worked, filling my screen properly. I remember late last night hooking up my 1080p/60z projector via HDMI and trying out some dual-screen options, which were working great. At one point, I accidentally hit "overscan", and since then, that option has disappeared, and I'm running with underscan (black borders).

 

What I've tried:

- Uninstalling and reinstalling NVIDIA Web Drivers (via the pref pane, uninstall option).

- Deleting the com.apple.coregraphics.plst file and then uninstalling/re-installing NVIDIA Web Drivers

- Installing pixel clock patch, and then uninstalling that

- Installing CUDA, then uninstalling CUDA

- All of the above in various combinations.

 

No matter what I try, the best I can get my screen is either a crappy lower resolution, but at least it is properly scaled (no black bars) OR I can get 3440x1440 but only at 60hz, and with underscaling (Black borders).

 

Any ideas?

Share this post


Link to post
Share on other sites

Issues with underscan when trying to run at my monitor's native resolution of: 3440 x 1440 @ 100hz, via displayport. Screen is underscaled, running with black borders.

 

System:

Gigabyte Aorus Z270X Gaming 7

Intel Core i7 i7700K

Gigabyte Aorus GTX 1080ti Xtreme

 

I had previously had a working build by installing the latest NVIDIA web drivers, and the 3440x1440 and 100hz options showed up, and worked, filling my screen properly. I remember late last night hooking up my 1080p/60z projector via HDMI and trying out some dual-screen options, which were working great. At one point, I accidentally hit "overscan", and since then, that option has disappeared, and I'm running with underscan (black borders).

 

What I've tried:

- Uninstalling and reinstalling NVIDIA Web Drivers (via the pref pane, uninstall option).

- Deleting the com.apple.coregraphics.plst file and then uninstalling/re-installing NVIDIA Web Drivers

- Installing pixel clock patch, and then uninstalling that

- Installing CUDA, then uninstalling CUDA

- All of the above in various combinations.

 

No matter what I try, the best I can get my screen is either a crappy lower resolution, but at least it is properly scaled (no black bars) OR I can get 3440x1440 but only at 60hz, and with underscaling (Black borders).

 

Any ideas?

 

 

FWIW, I used patch-edid.rb which solved the underscan/black border issue. Although there are a few remaining issues:

 

- My refresh rate locked at 60hz, and the box is greyed out, so I don't know how to get it back to 100hz (my monitor's native refresh rate).

- I have to enable nvda-drv=1, otherwise I don't have the option of 3440x1440 (my monitor's native resolution), but I thought this was supposed to be disabled for NVIDIA web drivers to work (with pascal cards)?

- My screen is a tiny bit tinted, like night shift or flux has been enabled a little bit. The only way I can see colors properly is if I enable Night Shift, move the slider a bit, then disable it. Having to do this every single time I boot up is not good.

 

Any ideas?

Share this post


Link to post
Share on other sites

FWIW, I used patch-edid.rb which solved the underscan/black border issue. Although there are a few remaining issues:

 

- My refresh rate locked at 60hz, and the box is greyed out, so I don't know how to get it back to 100hz (my monitor's native refresh rate).

- I have to enable nvda-drv=1, otherwise I don't have the option of 3440x1440 (my monitor's native resolution), but I thought this was supposed to be disabled for NVIDIA web drivers to work (with pascal cards)?

- My screen is a tiny bit tinted, like night shift or flux has been enabled a little bit. The only way I can see colors properly is if I enable Night Shift, move the slider a bit, then disable it. Having to do this every single time I boot up is not good.

 

Any ideas?

I have the same problem and I havent messed around with my EDID. Still looking for the solution but it looks to be related to NVIDIA because the same monitor connected to a Radeon Mac does not have the same behavior.

Share this post


Link to post
Share on other sites

Every time I restart I have the NVIDIA driver selected but under system info it shows the IGP HD4600 of the processor.

I have to select OS X Default Graphics Driver, restart, and select NVIDIA Web Driver.

 

ERROR_zpsc5tpoega.jpg

 

I have my monitor attached to the GTX 750ti and selected in bios this graphic card not the IGP.
When I start the computer I can see the bios, apple logo starting since one point where my screen gets black, only the screen, there's no hang up as I connect to this computer through splashtop and all is working as expected.

 

Any way to solve this?

Thankyou
Gus

 

*************************************************************

EDIT

*************************************************************

I did this I read somewhere and for the moment it's solved, I haven't had any more black screen since yesterday and I have reboot a lot of times to test it.

 

 


1. Open your Clover config.plist
2. Go to the SMBIOS section
3. Replace the Board-ID field with ONE of these (Doesn't matter what your actual SMBIOS is; I'm using an iMac 12,2 SMBIOS with an iMac 14,2 board-id as pictured below):

(Try this first) iMac 14,2: Mac-27ADBB7B4CEE8E61
iMac 13,2: Mac-FC02E91DDD3FA6A4
Mac Pro 4,1: Mac-F221BEC8
Mac Pro 6,1: Mac-F60DEB81FF30ACF6

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fantomas
      macOS Catalina 10.15.2 (19C57)
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/viewtopic.php?f=28&t=10578
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By HenryV
      I-5 Skylake/520 graphics/4gig RAM/UEFI boot/GPT
      Any one had issues with supplemental updates and/or security updates booting very slowly after install and using approx. 750 more megs of memory? This has happened with recent updates to Catalina 10.15.1, Mojave security update 2019-001, and High Sierra security update 2019-006. I know that the first reboot after updates is usually slow but this problem with slow booting and hard drive thrashing persists after multiple reboots. It seems as though hard drive access is being channeled though a buffer. In one instance Catalina paused for a long time on reboot and a message appeared indicating that enough information had been found to re-enable the soft bloc. afterward Catalina booted normally but Mojave was booting so slow that it was practically unusable. After multiple reboots High sierra takes around a minute for the desktop to fully initialize after the login, but it was usable.
      Does mac os use some kind of software input-output hard disk buffer that can be manually reset from the terminal? Disabling/enabling virtual memory paging seems to have no effect and the vm compressor mode is set to 2. The laptop only has 4 gig of memory but this has been enough to run all three os without boot issues in the past. Catalina on APFS, Mojave and High Sierra on HFS+.
      Any help appreciated.
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Mojave Full DSDT patch   http://olarila.com/forum/viewtopic.php?f=59&t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/forum/viewtopic.php?f=28&t=8222   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder   https://olarila.com/files/Clover.Folder/CLOVER.LGA775.zip   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://olarila.com/forum/viewtopic.php?f=28&t=8222     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
×