Jump to content
fantomas1

Nvidia Web Driver updates for macOS Sierra (UPDATE May 15, 2019)

1,060 posts in this topic

Recommended Posts

Advertisement

Yes and yes to 16D I think it is. The only "side effect" seems to a delay in the loading screen when it goes black it stays black longer but all works fine.

 

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites

Try this NVWEB injector for 10.12.2/10.12.3

drop in EFI

you dont need to change anything.

GTX_Injector NVWEB.kext.zip

Share this post


Link to post
Share on other sites

I thing VGA-Compatible Controller need to change Display Controller

Share this post


Link to post
Share on other sites

Look at the kextstat, not loaded kexts.

 

post-1073423-0-98244900-1482875037_thumb.jpeg


"I thing VGA-Compatible Controller need to change Display Controller"

 

??

 

Your load the kexts Sierra 10.12.3? 

Share this post


Link to post
Share on other sites

Look at the kextstat, not loaded kexts.

 

attachicon.gif25f02.jpeg

"I thing VGA-Compatible Controller need to change Display Controller"

 

??

 

Your load the kexts Sierra 10.12.3? 

Mmm need more test.

driver not work.

Share this post


Link to post
Share on other sites

Yah!

Sorry, but Injector.kext or Config.plist "NwidiaWed=YES" only cosmetics 10.12.3.

NVIDIA Driver Manager in menu bar indicates WebDriver, but not loaded Nvidia...Web kexts.

Share this post


Link to post
Share on other sites

Hey everyone,

Forgive my noobness. I read through the thread and still haven't come to a conclusive answer to a recent experience that I have.

I recently acquired a 4,1 Mac Pro flashed to 5,1 and installed the latest web driver on 10.12.2, after the restart I then shut-down and installed my EVGA GTX 980TI from one of my other rigs. Unfortunately, the display is completely black regardless of what port I plug into. 

Here is what my System Report shows for the card. 

Any suggestions or did I miss something. 

Thank you everyone for your time.

Share this post


Link to post
Share on other sites

Try this pack for 10.12.3

#install all kext via Easykext Utility

#install agin NVDAStartupWeb.kext

So install 2 times

 

http://www.mediafire.com/file/il7lne1lm451426/1.6-85-367.15.10.25f02.zip

Share this post


Link to post
Share on other sites

Hey everyone... I'm finishing up on a new build (due to my old motherboard dying on me)

 

I've got an i7-3770, Asrock Z77 OC Formula and a GTX980.

 

I can't boot with the 980. It was working just fine with the old motherboard (an MSI p67a). Now, if I use nv_disable, it boots ok (without acceleration obviously) and if i use NvidiaWeb, I get a black screen (with no errors, and there is actually a signal being sent to the display;  it's just blank), and the machine doesn't finish booting up (I know because I can't VNC into it).

 

All this is to say that no, it is NOT the AGDP issue. I'm using iMac13,2 SMBIOS.

 

Today this happened and I left it like that a while to see if it ever finished up booting (seeing as I'd read about people experiencing long boot-times on a black screen) but after a while I had to turn it off because, I {censored} you not, there was smoke and the smell of burnt plastic. I have no idea _what_ burnt, the only symptom I've seen so far is the BIOS doesn't recognize HDs plugged into the Marvell SATA3 controllers (but Windows sees the drives, so I don't think they actually died, or the ports, for that matter)

 

Needless to say, I haven't attempted to boot Sierra again.

 

Any ideas?

Share this post


Link to post
Share on other sites

FYI; Installing beta drivers on 12.2 fixes the cuda update issue. The nvidia panel crash is still there

The beta Nvidia Web Driver for 10.12.2(16C68) working perfectly for GTX-780.

It still works for 10.2.3(16D17a) for GTX-780.

post-70188-0-10326200-1482909954_thumb.png

post-70188-0-17811200-1482909967_thumb.png

post-70188-0-81356100-1482909976_thumb.png

post-70188-0-48771800-1482911927_thumb.png

post-70188-0-53197900-1482911938_thumb.png

post-70188-0-61049700-1482911946_thumb.png

post-70188-0-70058700-1482912160_thumb.png

Share this post


Link to post
Share on other sites

Not working 10.12.3

Not load:

GeForceWeb.kext

NVDAResmanWeb.kext

NVDAGK100HALWeb.kext

Etc.

 

You should expect 10.12.3 WebDriver

The Nvidia Web Driver for 10.12.2(16C68) still works at 10.12.3(16D17a) for GTX-780.

Share this post


Link to post
Share on other sites

Here is what my System Report shows for the card. 

 

 

Hi,

 

Where is your System report ?

 

Did you use these webdrivers  ?    macOS 10.12.2 (16C67) 367.15.10.25f01  or (16C68) 367.15.10.25f02

 

Which graphic card did you use for the 10.12.2 install ?  (before changing to GTX 980Ti)

 

May be a NVRAM reset  could help  ....    (  Cmd (⌘) + Opt + P + R)  on boot

 

Good luck

Share this post


Link to post
Share on other sites

@hexxus 

 

I'm in the same boat as you, but with some mer experience.  I think most of this community is hackintoshes.

 

You'll need to have an older official GPU as installed, I have the stock gt120 at the ready for when things go sideways. The card you have installed has no EFI drivers so it won't show boot screen or anything.   I'm actually sending my card (gtx970) to macvidcards.com for a custom flash here in January when I'm on vacation.  This will make it just work on the mac pro like any other stock mac card.

 

So, to get it working on your system get the older GPU in there as well as the new one, connect a display to the old GPU, install the nvidia web driver, reboot and the new card should now work, but only after  initial boot, you'll never be able to get boot screen support unless you too get it custom flashed.   This guy at macvidcards has pretty much reverse engineered some firmware and whatnot to made this work, he's not sharing it, there appears to be no other way to do it on an nVidia card.

Share this post


Link to post
Share on other sites

Hey everyone... I'm finishing up on a new build (due to my old motherboard dying on me)

 

I've got an i7-3770, Asrock Z77 OC Formula and a GTX980.

 

I can't boot with the 980. It was working just fine with the old motherboard (an MSI p67a). Now, if I use nv_disable, it boots ok (without acceleration obviously) and if i use NvidiaWeb, I get a black screen (with no errors, and there is actually a signal being sent to the display; it's just blank), and the machine doesn't finish booting up (I know because I can't VNC into it).

 

All this is to say that no, it is NOT the AGDP issue. I'm using iMac13,2 SMBIOS.

 

Today this happened and I left it like that a while to see if it ever finished up booting (seeing as I'd read about people experiencing long boot-times on a black screen) but after a while I had to turn it off because, I {censored} you not, there was smoke and the smell of burnt plastic. I have no idea _what_ burnt, the only symptom I've seen so far is the BIOS doesn't recognize HDs plugged into the Marvell SATA3 controllers (but Windows sees the drives, so I don't think they actually died, or the ports, for that matter)

 

Needless to say, I haven't attempted to boot Sierra again.

 

Any ideas?

Do not inject Nvidia.

Share this post


Link to post
Share on other sites

still getting a minute or two of black screen, it definitly is dependant on monitors, if i have 3 montiros its longer, if 2 monitors its shorter, if 1 monitor its shorter, etc.  Anyways to check the logs to see whats going on with the NVIDIA driver?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Aldaro
      I have been running macOS Mojave on my system for 3 months and everything was working pretty well.  After taking an update for clover, my entire system got wrecked, and I cannot even boot to an installation environment anymore (which I really need to do since I am starting back at square one).  I still have the old EFI folder backed up, but I know it'll only be a matter of time before Apple introduces an update that requires me to update Clover in order to work correctly.  I have tried all the available memory fixes, but none of them seem to work.  I was previously using the original osxaptiofix; so, I gave v2, and v3 a try, but to no success.  I read somewhere on the main discussion board for clover that AptioMemoryFix was no longer going to be supported and I therefor decided to skip over it (not to mention it isn't even available in newer clover installation packages).
       
      System specs:
      Motherboard: GIGABYTE Z390 M GAMING
      CPU Intel core i5 9600k @ stock 3.7GHz
      RAM 32GB DDR4 2667MHz
      GPU AMD Radeon RX 580 with 8GB of GDDR5
      SSD Intel 660p 512GB NVME
      NIC: Intel i210 10/100/1000 as it is natively supported in macOS
       
      I have been using the iMac 19,1 SMBIOs as I built this machine to match it as close as humanly possible.  As for my UEFI settings, I did the usual:
      Disabled Windows specific features and secure boot
      Enabled XHCI hand off
      Enabled Above 4G decoding
      Disabled onboard NIC since it is made irrelevant by my intel i210
       
      --INJECT KEXTS--
      FakeSMC
      Lilu
      WhateverGreen
      AppleALC
      USBInjectAll -- WITH PATCHED SSDT in /EFI/CLOVER/ACPI/patched
      Below are images of the errors I am receiving when trying to boot the macOS Mojave installer.
       
      with original osxaptiomemoryfix

       
      osxaptiofixv2

       
      osxaptiofixv3

       
      Anyway, if somebody can help me figure out what's going on, that'd be greatly appreciated.  My ultimate goal is to get an install with minimal clover patches as to be better prepared when the winds of change from Apple come roaring.
       
      p.s: I have also attached a copy of my EFI folder
       
       
      EFI.zip
    • By fusion71au
      Clover r4989 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4989 for VMware.zip". Mount Clover-v2.4k-4989-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By kalpesh2804
      Laptop Inbuilt Wifi and Battery Indicator not working in Catalina. (HP Pavilion 15t-au 100 Laptop)
       
       
      Laptop Config:
      HP Pavilion 15t-au100 * i7-7500u 2.90Ghz * Intel HD 620 Graphic Adapter * Intel Dual Band Wireless AC-3168 * Kingston SATA3 SSD 500 GB * HP Camera
    • By JackBauer24
      Hello,
       
      I have installed OSx86 10.11 (El Capitan) on April 2016 on my Asus Z170 Deluxe system.
       
      For installation I used this Thread.
       
      I used it a lot and it worked well. Meanwhile I switched to Linux and I use Win10 time to time. So OSX was forgotten. Also it did not boot correctly anymore.
       
      Now I wanted to start with a fresh installation and use OSX more often again. I want to use OSX 10.13 High Sierra. Is it working on my Asus Z170 Deluxe? I have the same Hardware as of April 2016 only the graphics card was updated to a Nvidia GTX1080.
       
      My Hardware in detail: Asus Z-170-Deluxe (Bios 3801), i7-6700k, EVGA GeForce GTX 1080 SC GAMING ACX 3.0, Samsung 950 Pro/M2 NVME 512MB, HDD 4 TB)
      Can I use some of support files from the old thread for the installation (see attachment)? Can I still use  Clover 2.3k r3292 Special Edition v2 ? Or do I need a newer version?
       
      Has someone installed High Sierra successfully on the Asus Z170 Deluxe ?
       
      About some hints where to start I would be thankful.
       
      regards
      JackBauer24
       
      Z170DeluxeFiles.zip
    • By fantomas1
      First beta... macOS Catalina 10.15 beta (19A471t)  Release Notes!!!
       
      Useful information:
       
      macOSDeveloperBetaAccessUtility.dmg.zip (thanks to gengik84)
      Clover r4945 (thanks to Cyberdevs)
      Lilu_plugins (thanks to gengik84)
      Port Limit Patch (thanks to daliansky)
      older non metal nVidia and Intel cards (thanks to fusion71au)
      MBR installation on macOS Catalina (thanks to crazybirdy) - workaround!!!
      Mac Downloader (thanks to ricoc90)
       
×