I don't know whether my LAN device will work on MAC and Which version of mac but i still want to run MAC on my PC, Also i checked my CPU-GPU and it turned out that i can Run MAX High sierra but i realized that some people have trouble with Sound and Internet connection so Here's the NAME of my LAN device:
PCI\VEN_10EC&DEV_8136&SUBSYS_012310EC&REV_05\4&45F2A70&0&00E1 as (LAN DEVICE took the name from device manager in windows).
also from compatibleIds i got this:
Is it Supported on any version of macOS ?
10.14.5: Memory allocation errors after clover update (affects both installation and the system I had working)By Aldaro
I have been running macOS Mojave on my system for 3 months and everything was working pretty well. After taking an update for clover, my entire system got wrecked, and I cannot even boot to an installation environment anymore (which I really need to do since I am starting back at square one). I still have the old EFI folder backed up, but I know it'll only be a matter of time before Apple introduces an update that requires me to update Clover in order to work correctly. I have tried all the available memory fixes, but none of them seem to work. I was previously using the original osxaptiofix; so, I gave v2, and v3 a try, but to no success. I read somewhere on the main discussion board for clover that AptioMemoryFix was no longer going to be supported and I therefor decided to skip over it (not to mention it isn't even available in newer clover installation packages).
Motherboard: GIGABYTE Z390 M GAMING
CPU Intel core i5 9600k @ stock 3.7GHz
RAM 32GB DDR4 2667MHz
GPU AMD Radeon RX 580 with 8GB of GDDR5
SSD Intel 660p 512GB NVME
NIC: Intel i210 10/100/1000 as it is natively supported in macOS
I have been using the iMac 19,1 SMBIOs as I built this machine to match it as close as humanly possible. As for my UEFI settings, I did the usual:
Disabled Windows specific features and secure boot
Enabled XHCI hand off
Enabled Above 4G decoding
Disabled onboard NIC since it is made irrelevant by my intel i210
USBInjectAll -- WITH PATCHED SSDT in /EFI/CLOVER/ACPI/patched
Below are images of the errors I am receiving when trying to boot the macOS Mojave installer.
with original osxaptiomemoryfix
Anyway, if somebody can help me figure out what's going on, that'd be greatly appreciated. My ultimate goal is to get an install with minimal clover patches as to be better prepared when the winds of change from Apple come roaring.
p.s: I have also attached a copy of my EFI folder
Clover r4989 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
1. Download and unzip "EFI_Clover_r4989 for VMware.zip". Mount Clover-v2.4k-4989-X64.iso by double clicking on it.
2. Mount your VM's EFI System Partition eg in terminal
sudo diskutil mount disk0s1 3. Copy EFI folder from step 1 into the EFI partition
4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
Laptop Inbuilt Wifi and Battery Indicator not working in Catalina. (HP Pavilion 15t-au 100 Laptop)
HP Pavilion 15t-au100 * i7-7500u 2.90Ghz * Intel HD 620 Graphic Adapter * Intel Dual Band Wireless AC-3168 * Kingston SATA3 SSD 500 GB * HP Camera
I have installed OSx86 10.11 (El Capitan) on April 2016 on my Asus Z170 Deluxe system.
For installation I used this Thread.
I used it a lot and it worked well. Meanwhile I switched to Linux and I use Win10 time to time. So OSX was forgotten. Also it did not boot correctly anymore.
Now I wanted to start with a fresh installation and use OSX more often again. I want to use OSX 10.13 High Sierra. Is it working on my Asus Z170 Deluxe? I have the same Hardware as of April 2016 only the graphics card was updated to a Nvidia GTX1080.
My Hardware in detail: Asus Z-170-Deluxe (Bios 3801), i7-6700k, EVGA GeForce GTX 1080 SC GAMING ACX 3.0, Samsung 950 Pro/M2 NVME 512MB, HDD 4 TB)
Can I use some of support files from the old thread for the installation (see attachment)? Can I still use Clover 2.3k r3292 Special Edition v2 ? Or do I need a newer version?
Has someone installed High Sierra successfully on the Asus Z170 Deluxe ?
About some hints where to start I would be thankful.