Jump to content
fantomas1

Nvidia Web Driver updates for macOS Sierra (UPDATE July 30, 2019)

1,061 posts in this topic

Recommended Posts

The new GM driver still cannot detect my GTX 750 TI.

So bad. I can load into the system. However, when using Chrome, a lot of flickering in screen.

Share this post


Link to post
Share on other sites
Advertisement

Guys, I just removed a lot of "off topic" posts - In my previous post, I asked you to stay focused on the main discussion.

 

All agdpfix, smbios and nvram issues have nothing to do with this thread. We already have dedicated topics for that so you can use our "research feature" to find them.

 

In order to keep this topic clean, all "off topic" posts will be deleted without warning!!!

 

I'm counting on your understanding.  ;)

 

Regards

Share this post


Link to post
Share on other sites

The new GM driver still cannot detect my GTX 750 TI.

So bad. I can load into the system. However, when using Chrome, a lot of flickering in screen.

This was exactly the issue I had following updates from PB5 to PB7 - simply could not get this driver to stick at all! I eventually downpaded PB7 again and made a fresh install stick. Installed a clean copy and used my existing Clover for El Capitan to boot )having moved kexts to a 10.12 folder in my case (Though "Other" will do just as well). Once I booted and installed the driver this time... I had 2 monitors working out of 3. On the next reboot 3 out of 3 and all working on this driver. Only issue though is that there is NO HDMI AUDIO!!!! But still... better than that annoying flickering and lack of graphic acceleration. I can now boot without any flags at all!

 

Try it! May work for you too!

 

I have since updated to the GM and the same driver installed prior to the update still works fine which is why I am very suspicious  about the  comment

 

 

Nvidia Web Driver - 367.10.10.05b01 has been updated to support the last macOS 10.12 GM build 16A320.

More like the post has been updated to say that the same driver we have been using since PB3 still works! Seems doubtful any work has been done on it though...

Share this post


Link to post
Share on other sites

I have since updated to the GM and the same driver installed prior to the update still works fine which is why I am very suspicious  about the  comment

 

Nvidia Web Driver - 367.10.10.05b01 has been updated to support the last macOS 10.12 GM build 16A320.
More like the post has been updated to say that the same driver we have been using since PB3 still works! Seems doubtful any work has been done on it though...

 

 

I'm afraid that's all what it is.  :(

 

And unfortunately, don't think things will change with public release (367.10.10.05f01).  :no:

Share this post


Link to post
Share on other sites

Guys, I just removed a lot of "off topic" posts - In my previous post, I asked you to stay focused on the main discussion.

 

All agdpfix, smbios and nvram issues have nothing to do with this thread. We already have dedicated topics for that so you can use our "research feature" to find them.

 

In order to keep this topic clean, all "off topic" posts will be deleted without warning!!!

 

I'm counting on your understanding.  ;)

 

Regards

 

Is that okay to posting / discussing about performance of driver (specially related with metal) or would be considered as off-topic as well ? I meant benchmarks  :P

Share this post


Link to post
Share on other sites

hey guys,

 

any sign of Nvidia GTX 1080 support? It's the only thing keeping me from installing hackintosh.

maybe it is supported in the future

Share this post


Link to post
Share on other sites

I'm afraid that's all what it is.  :(

 

And unfortunately, don't think things will change with public release (367.10.10.05f01).  :no:

 

Mystifying why they'd make this beta final without addressing the issue but as you say.... may have to wit for an updated driver which I hope they are already working on and will be available on the 20th or thereabouts! They were pretty good on support for Maxwell for El Capitan!

Share this post


Link to post
Share on other sites

Back to the main discussion, though.  :)

 

Nvidia Web Driver - 367.10.10.05b01 has been updated to support the last macOS 10.12 GM build 16A320.

 

Please, check the first page post #1.

 

Regards

 

Nvidia just added the support for the latest macOS 10.12 GM3 build 16A322.

 

The driver seems to be the same since DP4/PB3 so don't expect to see any improvement.

Share this post


Link to post
Share on other sites

Nvidia just added the support for the latest macOS 10.12 GM3 build 16A322.

 

The driver seems to be the same since DP4/PB3 so don't expect to see any improvement.

Just read the build number for this latest "update" is 16A322 whereas my build is 16A320... and there is seeminly no update in Mas..... what's the story there? But indeed... same build for the driver so no update!

 

There is however an update for iTunes... I really hope at least there is colour again... they stripped out all the good thigs I like about it!

Share this post


Link to post
Share on other sites

My gtx 980 isn't working with 16A322 drivers with same macOS build

 

tried forcing it, with no luck

Well, I had a similar problem I guess (the difference is that my video card is an GTX 750ti).
I've found that the boot_args with nvda_drv=1 is not enough and, for my case to be using a z97 motherboard, is not necessary to have the EmuVariableUefi file at /Volumes/EFI/EFI/CLOVER/drivers64UEFI, so, I've deleted it, cleared the nvram (sudo nvram -c) and then use the NV Web Driver to set the nvram variable, restarted and now is working fine (excepts for the transparency issue)  :thumbsup_anim:

 

Hope this helps you.

Share this post


Link to post
Share on other sites

I have GTX 980 and X99 platform. nvidia drivers working well dont use boot arg nvda_drv=1 on Mac OS Sierra . slice autor of clover write about that here http://www.insanelymac.com/forum/topic/304530-clover-change-explanations/page-2 last time when clover has been updated  "

Rev 3733

It was my mistake setting nvda_drv=1 flag as boot-args. No! It is NVRAM variable nvda_drv that can have a value "1".

So I make new config value"

 

    <key>SystemParameters</key>
    <dict>
        <key>NvidiaWeb</key>
        <true/>
    </dict>

 

thats all guys everything works :)

Share this post


Link to post
Share on other sites

I have GTX 980 and X99 platform. nvidia drivers working well dont use boot arg nvda_drv=1 on Mac OS Sierra . slice autor of clover write about that here http://www.insanelymac.com/forum/topic/304530-clover-change-explanations/page-2 last time when clover has been updated  "

Rev 3733

It was my mistake setting nvda_drv=1 flag as boot-args. No! It is NVRAM variable nvda_drv that can have a value "1".

So I make new config value"

 

    <key>SystemParameters</key>

    <dict>

        <key>NvidiaWeb</key>

        <true/>

    </dict>

 

thats all guys everything works :)

do you add emuvariableuefi-64.efi to clover?

Share this post


Link to post
Share on other sites

Hi Everybody,

I have successfully installed the driver under Sierra with a Gigabyte GTX 970 on a Skylake system (Gigabyte z170m + 6600k), but could not activate it, until I installed the EmuUefiVariables.efi extension in Clover.

Perhaps will it helpful to somebody...


But with the newest Clover 3751, i can set the NVRAM variable NvidiaWeb=true, so i don't need the EmuUefiVariables extension at all, again...

Thanks for the great work!

Share this post


Link to post
Share on other sites

Hi Everybody,

I have successfully installed the driver under Sierra with a Gigabyte GTX 970 on a Skylake system (Gigabyte z170m + 6600k), but could not activate it, until I installed the EmuUefiVariables.efi extension in Clover.

Perhaps will it helpful to somebody...

But with the newest Clover 3751, i can set the NVRAM variable NvidiaWeb=true, so i don't need the EmuUefiVariables extension at all, again...

Thanks for the great work!

also dont need boot flag nvda_drv=1

Share this post


Link to post
Share on other sites

i told them like 6 pages back but they didn't listen to me , now my board works without having to use emuvariable, so that weird problem that i had is now fixed thanks to this new version of clover, so i only needed to use emuvariable only in sierra and only for the card to work in sierra , my board has support for nvram without having to use emuvariable so it turn out to be a problem that clover fixed , technically i was forced to use emuvariable in sierra if i wanted my card to work, i explain this a million times, then they say that i didn't know what i was doing or i didn't know what i was talking about, that there it was something wrong with my board or my configuration. so time proved me right. anyway let's just forget the whole thing and move on, i'm happy and i can't wait for Sep 20. Sierra  :thumbsup_anim:

 

windows 10 sucks


Hi Everybody,

I have successfully installed the driver under Sierra with a Gigabyte GTX 970 on a Skylake system (Gigabyte z170m + 6600k), but could not activate it, until I installed the EmuUefiVariables.efi extension in Clover.

Perhaps will it helpful to somebody...


But with the newest Clover 3751, i can set the NVRAM variable NvidiaWeb=true, so i don't need the EmuUefiVariables extension at all, again...

Thanks for the great work!

exactly the same thing happened to me 

 

now we are not forced to use emuvariable if our boards have support for nvram , the only person now that needs to use emuvariable are the ones that don't have nvram support in their boards and they are using clover in EUFI mode, so things are now back to normal.

Share this post


Link to post
Share on other sites

Updated Driver 367.15.10.05f01 !!!

Just got it via the Update Button in the NVIDIA pref plane.

 

Changelog:

- New G-SYNC Option added in NVIDIA Driver Manager pref plane.

- Geekbench 4.0.1 still aborts in the 2nd openCL test for me

- ???

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fantomas1
      Developers are being given a preview version of macOS Catalina today and a public beta will be available this summer (in July).
      The final version will be available to the general public in the fall.

      View full article
    • By End3rPower50
      Hi, I want to install MacOS Catalina on my laptop.
      I was installed MacOS Mojave previously but i had a lot of problem, for example my wifi's card (Dell DW1820A) had a problem: My pc sometimes doesn't boot up or pc after some minutes crashed or slowed. 
      Now i want to try again to install macOS.
       
      this is my spec: 
      HP 15-AY034NL 
      CPU: i7 6500U  with HD520
      SSD: 500GB SSD Samsung
      Wifi & Bluetooth: Dell DW1820A (Bluetooth: BCM2045A0) (Wifi: BCM94350ZAE)
      USB 3.0 
      Ethernet: Realtek 8100
       
      Attached in this thread, my old clover configuration created by me (CLOVER OLD) and clover with Wifi driver (CLOVER) created by Hervè (I had asked help at insanelymac's community)
       
      P.S SORRY FOR MY BAD ENGLISH.
      Thanks in advance 
      -ANTONIO
      CLOVER OLD.zip
      CLOVER.zip
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/forum/download/file.php?id=25033
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/download/file.php?id=24376
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By shinho73
      Can someone help me fix reboot issue? Actually it reboots, but sometimes the hackintosh just hangs with screen off. Here is the Extra folder containing org.chameleon.boot.plist. https://drive.google.com/drive/folders/1MX8-DpQk9kaRUfjPcToxf-ElWh-bN6EY?usp=sharing  and the spec of the PC. https://drive.google.com/drive/folders/1NlcUNK5DBzJFxeFeuyt92eRjQqwO5T32?usp=sharing Can someone look at it? I might be doing something wrong. Any help will be greatly appreciated. Thank you. 

×