Jump to content
  1. fantomas1

    fantomas1

  • Similar Content

    • By DiddyKong
      Fully optimizing DSDT & SSDT for OS X Sierra POST INSTALL on a Dell345MT with a i7 - 920(first gen) 
       
      I know how this forum feels about 3rd party software, but that was just a crutch, I'm 100% vanilla now which is why I'm now posting for help because I eliminated the possibility having to do with 3rd party. Anyways, with that said I just have a couple things I want to be sure of.
       
      I used a n---bistro to get a App Store copy of Sierra, as I didn't know there were other ways of getting it now from a windows10 machine. anyways, I was able to build a vanilla usb. I couldn't figure the EFI out on my vanilla Sierra-usb, but the EFI on the usb-ni---bistro I had would boot my pre-install and post-install. so I was able to install Sierra. After a few days of figuring out how to remake a EFI and config, I broke my EFI.
      So back to my windows10 SSD and I found BootDiskUtility, and that made a EFI usb with the newest version of clover(r4895). So then swapped SSDs back to my OS X, plugged in the BDU-usb, after trial and error I got back into my Sierra. Now with the newest version of clover and no traces of ni---bistro anymore. Then copied the BDU-usb to my SSD EFI and was able to boot without a usb again!! YAY.
       
      Then starting working on fixing my web drivers for my gtx 1050 2gb. Installed the os update so i'm at 10.12.6, pulled my hair out figuring out the web drivers, eventually got them installed and the cuda fixed.
       
      Now all 3 of my screens work, yet windows can't sit 'between' screens, I just simply haven't looked for that fix yet as I want the sys itself running like a top first.
      My screen saver works, I don't get stuck in screensaver, I did once before, I believe lilu.kext and whatevergreen.kext fixed that.
      Now with all that I felt it was time to give my config.plist a diet cos it was bloated, I generated a config copied the clover settings check for check instead of coping text cos I'm trying to shrink it.
      Config.plist boots my system with DSDT-1FE7B5D7
       
      So after the above, This is now where I'm stuck
       a 100% correct DSDT and SSDT, from my understanding with a patched DSDT I wouldn't need any options selected in clover on the ACPI page?
       
      So with the patching part that I think I understand how to do it now, but when I extract with F4 every file has RSDT in front of it, I have one that says RSDP.aml and RSDT.aml
      so would I just erase the RSDT from the beginning of each file then go from their, which would then leave me with a DSDT.aml and 17 SSDTs?
      I know I have to decompile and patch them, but with my file names[DSDT table extract] not matching tutorials online I'm having a difficult time understanding which files I need.
      IS the RDST-DSDT.aml my DSDT? it is the biggest file.
      which ones that have SSDT in the filename is the SSDT(s) I need to patch?
       
      also how do I know if everything is patched correctly? like if my CPU is fully working and not just sorta working that way when I start running software like photoshop, unity, 10 chrome tabs, my hackintosh doesn't crash
       
      System details
      i7 920 (first gen) very similar to nehelam
      GeForce 1050 2Gb (3 monitors connected all work, one acer on HD connection, two HP s2031 on HD, using adapters to change all ports on GPU card to HD for screens)
          display port, HDMI, and HD
      4x 1Gg + 2x 8Gb RAM running at 1066 after injecting smbios with ram info macOS sees all my ram correctly
      Samsung SSD 860 EVO 500Gb
       
      Thanks to anyone that can help me out, I've been working on my system for about two weeks and this is basically the wall I finally can't seem to figure out how to pass
      I can post another info also if it helps
       
      Boot.log
      DSDTdump.Log

    • By glasgood
      CLOVER DUAL BOOT MOJAVE & WINDOWS 10 GUIDE 
       

       
       
      INCLUDES  MBR / LEGACY BIOS  TO  GPT / EFI CONVERSION
      USING MBR2GPT TOOL
       
       
      PREREQUISITE: Two physical discs ( SSD’s or HDD’s )
       
       
       
       
       
      STEP 1 - Clover dual boot configuration 
       
      Open config.plist with Clover Configurator
       
      Boot
       Legacy = PBR Timeout = True ( will remove the Timeout countdown, from Clover boot menu)  

       
      GUI 
      Scan / Custom
       Entries = True  Tool = True  Legacy = False ( removes extra Windows 10 entries )  
      Hide Volume
      - Preboot ( macOS Preboot )
      - Recovery ( macOS Recovery )
       

       
      So at boot you will have two options: boot macOS Mojave or Windows 10 
       
       
       
       
       
       
       
      ————————————————————
       
       
      STEP 2 - Using a drive without Windows 10 installed
       
      Disconnect system drive that contains your macOS Mojave install from computer ( This is so that Windows does not overwrite existing macOS Mojave boot loader )
       
      Proceed with a Windows 10 UEFI install.  
      After installation reconnect macOS Mojave Drive, the Windows installation should now be detected and usable in Clover. 
      If Windows 10 is not detected or able to boot,  then verify you installed Windows 10 as UEFI and not MBR ---->  ( Read step 2 - For a drive with Windows 10 installed )
       
       
      OR
       
       
       
      STEP 2 - Using a drive with Windows 10 already installed
       
      Verify your Windows install is  GPT / UEFI or MBR / Legacy BIOS.   
      If Windows install is GPT UEFI then Windows 10 install is ready to use at Clover boot menu, you should be able to boot into Windows directly from Clover boot screen. 
       

       
       
      But if  Windows drive is detected at Clover boot screen, but when booting Windows you get a black screen with a cursor on the top left,
      then this is most likely because Windows drive is MBR ( Legacy BIOS ).  You can easily convert MBR to GPT using  Windows MBR2GPT tool ( this saves hours work having to reinstall Windows 10 and setting up all your applications again  ) 
       
      If Windows 10 install is MBR / Legacy BIOS  then simply convert to GPT / UEFI  following instructions below ( read video summary and view video )
       
       
      ** To use Windows 10  MBR2GPT tool  you must have Windows 10 version 1703 ( creators update  ) or later and less than 3 partitions on 
      the Windows 10 drive **
       
      Video summary:
       
      Confirm Windows 10 drive is MBR Legacy BIOS ( in Windows Disk Management ) Reboot into Windows PE ( Advanced Startup ) Convert from MBR Legacy BIOS to GPT UEFI ( using commands below ) mbr2gpt /validate mbr2gpt /convert Restart Verify Windows 10 drive has changed to GPT UEFI ( in Windows Disk Management )  
       
       
       
      After conversion Windows 10 is ready to use at the Clover boot menu 
       
       
    • By mikmavros
      Thanks for accepting
      I recently installed Sierra  and I encounter the following problem ... When I restart or I start up my machine return to BIOS. If anyone knows and can any help be valuable Thank you very much. (When I boot from a Capitan disk in the same machine all  is running well.) Both discs with Clover in Legacy mode.
      gigabyte z68x-ud5-b3 F8
      I7 2600K
      GT 620 ( την βλέπει κανονικά χωρίς Web drivers)
      16 GB ddr3 1600 


    • By Slice
      I successfully installed macOS 10.11.6 and Windows 7 Pro SP1 in UEFI mode on the laptop.
      I know, there are detailed guides here and on osxlatitude.com but I was not agree with them and carefully check and test every step to tune my Mac.
       
      Hardware
      Intel® Core� i5-3320M CPU @ 2.60GHz, speedstep works with Clover default settings
      Chipset Intel 7 series, no patches needed
      Video: IntelHD4000 or NVS5200M switchable in BIOS, work in both cases
      LAN; Intel 82579LM, works with IntelMausiEthernet.kext v2.2.1
      Audio: IDT 92HD93BXX, works with VoodooHDA 2.9.0.
      SDHC reader O2Micro; works with native AppleSDHC.kext with Clover Arbitrary properties.
      USB3.0 works natively if not disabled in DSDT
      PS2 keyboard and touchpad works with VoodooPS2.
      WiFi: Dell Intel WiFi was replaced by Dell DW1520, Broadcom BCM943224HMS. DeviceID=4353
      LCD Screen 1366x768
      BIOS A12. Initially was A02. Then I flashed A23 and found it is quite bad. The screen is full of artefacts. Flash A12 and all is OK. Not tested other versions.
      For some reason BIOS can switched from Intel to Nvidia by itself so I have to do my solution working independent on this state.
       
      WiFi
      It is not working OOB although it has DeviceID known to Apple. The reason is WhiteList in the driver.
      I set MacModel as MacBookPro10,1 while the WiFi will work on MacBookAir. I make a patch in Clover.
      As well a patch for channels.
      I deleted a kext Brcm4331 because it has the same DeviceID. Let kext Brcm4360 to work alone.
       
      VideoCards
      In Bios we can set Optimus = Enable/Disable
      If Enable then we have two videocards Intel first and Nvidia second. In this case additional SSDT-3.aml will switch off Nvidia.
      If Disable then we have only Nvidia card. It will work if Board-ID taken from iMac13,2.
      But here there is contradiction with WiFi with required Board-ID from MacBookAir.
      So I take MacModel as MacBookPro10,1 which is most close by CPU IvyBridge.
      Set BoardID like iMac13,2 to make Nvidia working.
      Patch BoardID in Brcm4360 to make WiFi working.
      Now I have
      Inject->
      ->Intel=YES
      ->Nvidia=YES
      and SSDT-3.aml in ACPI\patched folder. This SSDT will switch off Nvidia if Intel card ON.
      For Intel graphics there is a patch against 8 apples at start.
       
      Brightness
      No special kexts.
      The brightness controlled by keys F1,F2 and slider in Control Panel in both case Intel or Nvidia. Details here  #72 
       
      DSDT and SSDT
      This is very long story and finally I have working sleep in both cases Intel or Nvidia.
       
      Sensors
      I use my HWSensors3 with FakeSMC 3.5.0.
      I got monitoring:
      CPU temperature
      GPU temperature
      GPU main frequency
      GPU shader frequency
      Battery state % full, time to charged or time to empty.
      Battery voltage dinamically.
      Battery amperage dynamically. I can see it changes on heavy games.
      HDD temperature.

       
      Audio
      I like VoodooHDA and have no problems with it.
      The sound is clear, loud, and switchable between internal speaker and headphone.
      Mic is working.
       
      Bluetooth
      Just tested with BTFirmwareUpdate.kext and it works in 10.11.6. I not needed it so switched off by wireless switch at right side.
      For 10.13.6 there is other kext BRCMInjector.
       
      Keyboard, Touchpad and Touchstick
      Post #14
       
      My config, ACPI files and kexts are in attachment.
      05.12.2017
      EFI.7z
       
      EDITED:
      Better DSDT in the post #6.
      Sleep working even when AC inserted.
       
      EDITED 06.12.2018
      Now I have HighSierra and this is my EFI folder
       

       
       
      Welcome to discussion!
      EFI-E6430.7z
      BRCMInjector.kext.zip
    • By Badruzeus
      "The all-new 2019 version of the graphic design software suite is compatible with not only Windows but also Mac, complete with support for Dark Mode on macOS Mojave and the Touch Bar on the latest MacBook Pro models, providing quick access to layout settings, text controls, and more." ~ macrumors
       
      More details: https://www.coreldraw.com/en/product/coreldraw/mac/
×