Jump to content
fantomas

Apple unveils "macOS Sierra"

408 posts in this topic

Recommended Posts

Advertisement

I managed to install it work fine but my official apple airport card BCM943602CS is not working its supposed to be native but only wifi work Bluethoot is not even detected can some one help ? 

It may not be supported FULLY since as we know of, Sierra is issuing a lot of changes to a lot of the hardware and software we commonly use

Share this post


Link to post
Share on other sites

It seems Apple messed up the R9 290X Drivers.

 

-NO >> with the latest FakeSMC from HWsensors.

-NO >> injected ID 0x67B01002 | 4 Ports | Baladi [Clover]

-Yes but eh >> with injected ID 0x67B01003 ++> No EQ/CI extreme slow performance.[clover]

 

*All these tries done with Clover installed to the installation media and with the Original motherboard fw.

*The card connected to the screen thorugh a DVI-D Cable.

 

 

waiting for the next DP release.

Share this post


Link to post
Share on other sites

It may not be supported FULLY since as we know of, Sierra is issuing a lot of changes to a lot of the hardware and software we commonly use

 Even for a Official Apple card ? i doubt that since its working with no issue in my macbook pro 

Share this post


Link to post
Share on other sites

Even for a Official Apple card ? i doubt that since its working with no issue in my macbook pro

If it is just bluetooth missing, your USB is probably not configured correctly.

Share this post


Link to post
Share on other sites

I didn't think of it at all but am sure now that is the problem thank you RehabMan :D

Check in System Information->USB.

Share this post


Link to post
Share on other sites

also i can boot when the NVMeGeneric kext is in clover kext folder its give me instant kernel panic, can i load it without this kext ?

Best to avoid NVMeGeneric.kext. Install an M.2 PCIe AHCI such the Samsung SM951/AHCI or a M.2 SATA (such as Samsung 850 EVO).

Share this post


Link to post
Share on other sites

i Only have an 950 Pro NVMe :( 

with the new Mac OS Sierra is there a native NVMe driver or still no support for it ? 

Currently The 950 pro work well with MacOS El Capitan and clover install on it, but since the NVMeGeneric kext is loaded to i get instant KP so the best options for me its to disable loading this kext for the Sierra partition can you help me doing that ?

Thank you

Share this post


Link to post
Share on other sites

i Only have an 950 Pro NVMe :( 

with the new Mac OS Sierra is there a native NVMe driver or still no support for it ? 

Currently The 950 pro work well with MacOS El Capitan and clover install on it, but since the NVMeGeneric kext is loaded to i get instant KP so the best options for me its to disable loading this kext for the Sierra partition can you help me doing that ?

Thank you

If you don't have NVMeGeneric.kext, you won't be able to boot your system on the SSD, right?

I would sell the 950 Pro and purchase an SM951/AHCI. The performance difference is negligible.

Share this post


Link to post
Share on other sites

If you don't have NVMeGeneric.kext, you won't be able to boot your system on the SSD, right?

I would sell the 950 Pro and purchase an SM951/AHCI. The performance difference is negligible.

:P

 

I'm using it as storage  :lol:

i Only have an 950 Pro NVMe :(

with the new Mac OS Sierra is there a native NVMe driver or still no support for it ? 

Currently The 950 pro work well with MacOS El Capitan and clover install on it, but since the NVMeGeneric kext is loaded to i get instant KP so the best options for me its to disable loading this kext for the Sierra partition can you help me doing that ?

Thank you

wich version of el capitain 10.3 ?

Here not work on el ..but only on yose

Share this post


Link to post
Share on other sites

:P

 

I'm using it as storage  :lol:

It works ok as a storage drive (doing the same thing here... sometimes).

 

But using it as a boot drive is a whole different ball game...

Share this post


Link to post
Share on other sites

I am using it as boot drive and no issue so far except its not detected as NVMe or PCiexpress but as external storage

But there are other issues (I guess you haven't noticed):

- it shows as external due to describing its location as "Internal/External" in ioreg.

- reboot due to panic on restart or shutdown

- intermittent delays/pauses after wake from sleep

- panic on startup with certain systems (I2C related, remove or disable AppleHPM.kext)

- it is not marked OSBundleRequired=Root, so you cannot install it to /S/L/E or /L/E

 

I created a patch for the internal vs. external issue... (it is in my config_nuc6.plist in my NUC github project)

 

You can fix the OSBundleRequired=Root bug:

/usr/libexec/PlistBuddy -c "Add :OSBundleRequired string" NVMeGeneric.kext/Contents/Info.plist
/usr/libexec/PlistBuddy -c "Set :OSBundleRequired Root" NVMeGeneric.kext/Contents/Info.plist
The other ones, no fix for yet...

Share this post


Link to post
Share on other sites

I had those two issues even with external but after installing the 10.11.6 beta no problem so far :D no more kernel panic and wake from sleep work well but since i have a corsair H110i GTX i can't put my hackintosh on sleep my self cause the usb of the pump keep waking it up 

Share this post


Link to post
Share on other sites

I had those two issues even with external but after installing the 10.11.6 beta no problem so far :D no more kernel panic and wake from sleep work well but since i have a corsair H110i GTX i can't put my hackintosh on sleep my self cause the usb of the pump keep waking it up

When 10.11.6 is released, I'll probably drop the 950 NMVe back into my NUC6 and see what happens. Since the delay after wake is intermittent, it is a little hard to say it is fixed if you're not actually sleeping the computer on a regular basis (intermittent problems require long term/persistent testing).

 

The I2C/AppleHPM.kext induced KP seems more prevalent on laptops where such I2C hardware is more common.

Share this post


Link to post
Share on other sites

yeah it can't sleep unfortunately is there a Clover patch to deal with the issue of the pump ? its checking continuously the temps i think and to monitor it its always keep waking up the Hackintosh since its need information from the usb header :(

 

P.S : Your patch work just did it right now and my ssd is detected as internal PCI SSD.

I have another question i installed fakesmc hwmonitor and all its plugin but its dont show the fan rpm so i can't control them from hackintosh but from windows via Asus AiSuite i can, what did i need to do to make my case fan silent on hackintosh ? 

 

Thanks for taking your time to help me RehabMan =D 

Share this post


Link to post
Share on other sites

yeah it can't sleep unfortunately is there a Clover patch to deal with the issue of the pump ? its checking continuously the temps i think and to monitor it its always keep waking up the Hackintosh since its need information from the usb header :(

Chances are you have no software to interpret the results coming from that device, so you don't need the port enabled. Disable it by not injecting it...

 

P.S : Your patch work just did it right now and my ssd is detected as internal PCI SSD.

Yes... it is a very obvious/easy to create sort of patch... (string replacement).

 

I have another question i installed fakesmc hwmonitor and all its plugin but its dont show the fan rpm so i can't control them from hackintosh but from windows via Asus AiSuite i can, what did i need to do to make my case fan silent on hackintosh ?

Perhaps your BIOS has some options for fan control...

Share this post


Link to post
Share on other sites

How do i target the port and disable it ? can you explain how ?

On my bios its on silent but the noise is controlable via Windows not on hackintosh its drive me crazy ! how can i save the result from windows and boot in hackintosh with no noise ? 

P.S : Thanks for the patch BTW i am not a programmer just some random guy who like to search and experiment :P 

Share this post


Link to post
Share on other sites

How do i target the port and disable it ? can you explain how ?

There are quite a few guides for USB customization. Personally, I use USBInjectAll.kext + an SSDT to customize it.

 

On my bios its on silent but the noise is controlable via Windows not on hackintosh its drive me crazy ! how can i save the result from windows and boot in hackintosh with no noise ? 

P.S : Thanks for the patch BTW i am not a programmer just some random guy who like to search and experiment :P

Unfortunately, you would need to know how your fan is controlled, and then write some code for it (I did it for the HP ProBook/EliteBook series, for example).

Share this post


Link to post
Share on other sites

Hope i can do it since i am not a programer i dont know ho to do it on my own same thing for the can i can't write a code to control fan i am on a desktop setup not laptop is it the same ?

Edited by Allan
Font size

Share this post


Link to post
Share on other sites

Hope i can do it since i am not a programer i dont know ho to do it on my own same thing for the can i can't write a code to control fan i am on a desktop setup not laptop is it the same ?

Unless someone has already accomplished it (and written it up), it would require skills...

Share this post


Link to post
Share on other sites

 

I created a patch for the internal vs. external issue... (it is in my config_nuc6.plist in my NUC github project)

 

 

/usr/libexec/PlistBuddy -c "Add :OSBundleRequired string" NVMeGeneric.kext/Contents/Info.plist
/usr/libexec/PlistBuddy -c "Set :OSBundleRequired Root" NVMeGeneric.kext/Contents/Info.plist
The other ones, no fix for yet...

 

do you mean you do not see it more as an external but as internal?

I had those two issues even with external but after installing the 10.11.6 beta no problem so far :D no more kernel panic and wake from sleep work well but since i have a corsair H110i GTX i can't put my hackintosh on sleep my self cause the usb of the pump keep waking it up 

You use on slot PCIe external or M2 on mainbord?

Wich main have you?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fantomas
      macOS Catalina 10.15.2 (19C57)
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/viewtopic.php?f=28&t=10578
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Mojave Full DSDT patch   http://olarila.com/forum/viewtopic.php?f=59&t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/forum/viewtopic.php?f=28&t=8222   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder   https://olarila.com/files/Clover.Folder/CLOVER.LGA775.zip   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://olarila.com/forum/viewtopic.php?f=28&t=8222     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By fantomas
      macOS Catalina 10.15.2 beta (19C32e)
×