Jump to content
nguyenlc1993

[GUIDE] Installing macOS on ASUS K501L

92 posts in this topic

Recommended Posts

Thank you for your very detail guide :) I have been successful hackintosh my Asus K501lx. Everything works correctly except turbo boost function. I checked CPU frequency with Intel® Power Gadget. Max frequency was 2.20 Ghz but I know it could reach 2.70 Ghz in turbo boost. I've searched google pretty much and found some information related to smbios. They said that smbios macbook pro could not turbo boost. Is it right? If not so how can I activate turbo boost? Thanks in advance.

Share this post


Link to post
Share on other sites
Advertisement

Thank you for your very detail guide :) I have been successful hackintosh my Asus K501lx. Everything works correctly except turbo boost function. I checked CPU frequency with Intel® Power Gadget. Max frequency was 2.20 Ghz but I know it could reach 2.70 Ghz in turbo boost. I've searched google pretty much and found some information related to smbios. They said that smbios macbook pro could not turbo boost. Is it right? If not so how can I activate turbo boost? Thanks in advance.

 

You can remove DisableTurboBoostBattery.kext and test again if TurboBoost work or not. Better use Pike's AppleIntelInfo.kext to check for P-State.

Share this post


Link to post
Share on other sites

Hello- I have the K501UX which is similar but 4k screen (probably more differences than that). For months I've tried to get OS X running on it, and did at one point, but without trackpad/internal HD and with choppy graphics. So I was thrilled when I saw this post, thinking maybe this computer was close enough to mine to work, but alas, following this tutorial I can't even get the installer to appear, keep getting stopped during the white text for unknown reasons.

Knowing more than me, should this tutorial be at all relevant to my computer, or should I keep looking?

Share this post


Link to post
Share on other sites

Hello- I have the K501UX which is similar but 4k screen (probably more differences than that). For months I've tried to get OS X running on it, and did at one point, but without trackpad/internal HD and with choppy graphics. So I was thrilled when I saw this post, thinking maybe this computer was close enough to mine to work, but alas, following this tutorial I can't even get the installer to appear, keep getting stopped during the white text for unknown reasons.

Knowing more than me, should this tutorial be at all relevant to my computer, or should I keep looking?

Your hardware platform is Skylake, so this guide won't work.

Share this post


Link to post
Share on other sites

Hi, my hackintosh is working flawlessly now except for wifi speed. I replaced my unsupported ar9462 with ar9285. I can connect to wifi and use internet with the AtherosARPT.kext you provided, but the internet speed seem to be very slow. I tested it using speedtest.net. My other laptop (with replaced ar9462 card) was easily to get speed around 20mbs while my hackintosh only 1 to 2mbs. That's pretty unusual for me. Do you have any idea how to fix that? Thanks in advance. 

Share this post


Link to post
Share on other sites

Hi, my hackintosh is working flawlessly now except for wifi speed. I replaced my unsupported ar9462 with ar9285. I can connect to wifi and use internet with the AtherosARPT.kext you provided, but the internet speed seem to be very slow. I tested it using speedtest.net. My other laptop (with replaced ar9462 card) was easily to get speed around 20mbs while my hackintosh only 1 to 2mbs. That's pretty unusual for me. Do you have any idea how to fix that? Thanks in advance. 

 

AtherosARPT.kext only make the native OS X driver works with unsupported device IDs. Therefore the problem should lies on your card, network adapter settings or your Internet. You can go to System Preferences -> Network, select Wifi adapter, click Advanced then check the settings in Hardware tab.

Share this post


Link to post
Share on other sites

Thanks for your help. I managed to fix this problem. The problem is caused by router chanel width setting. Default value is 20Mhz that limit wifi link speed to 65Mbit/s. After change chanel width to 40Mhz, the link speed was changed to 150Mbit/s as expected.

Share this post


Link to post
Share on other sites

Hello, is geforce 960m supported by MacOS ? How to enable it?

 

And one more question.. I have issue with graphics : http://image.prntscr.com/image/70d028b7e0da4348a8412654973d1f8b.png, It works perfect on external monitor, but not on laptop monitor.

You did not include your hardware specs in your signature, so I will not answer any of your questions. Besides that, if I'm not wrong, K501LX does not equip with nVidia GTX 960M.

Share this post


Link to post
Share on other sites

You did not include your hardware specs in your signature, so I will not answer any of your questions. Besides that, if I'm not wrong, K501LX does not equip with nVidia GTX 960M.

yes, i'm wrong, 950m..

 

K501LX: Core i7 5500U 2400 MHz/15.6"/1920x1080/8.0Gb/1000Gb/NVIDIA GeForce GTX 950M/ - my configuration.

950M seems is not supported by MacOS :(

 

I have issue with graphics : http://image.prntscr...654973d1f8b.png, It works perfect on external monitor, but not on laptop monitor.

Seems works fine with with CSM enabled.

 

P.S. thanks for the guide.

Share this post


Link to post
Share on other sites

Time to rename the topic to "Installing Sierra" :) Sierra works fine with this guide.

 

Have you upgraded to official Sierra? If so, did everything work? Especially trackpad and keyboard, because they did not work well on my laptop with Sierra Public Beta 1.  :|

Share this post


Link to post
Share on other sites

Have you upgraded to official Sierra? If so, did everything work? Especially trackpad and keyboard, because they did not work well on my laptop with Sierra Public Beta 1.  :|

Yes, keyboard and trackpad seems work well.. But i mostly use wireless keyboard and mouse..

Share this post


Link to post
Share on other sites

Yes, keyboard and trackpad seems work well.. But i mostly use wireless keyboard and mouse..

 

I have installed official Sierra yesterday and used the latest ApplePS2SmartTouchpad.kext, but some of the hotkeys (volume and brightness keys) and multitouch gestures (3 to 5 fingers) are still not working. That's why I'm not eager to update my guide for Sierra yet. Would you mind to test keyboard and trackpad again?

Share this post


Link to post
Share on other sites

does the airplane indicator led is lit after wake ? is it a known problem ?

because it is happening on me

 

any solution ?

Share this post


Link to post
Share on other sites

does the airplane indicator led is lit after wake ? is it a known problem ?

because it is happening on me

 

any solution ?

Currently there's no solution, and I don't mind to fix it because it's just a minor issue. You can dig into DSDT to know how to control airplane LED and link it with Wifi & Bluetooth state, then make a patch for it.

Share this post


Link to post
Share on other sites

Currently there's no solution, and I don't mind to fix it because it's just a minor issue. You can dig into DSDT to know how to control airplane LED and link it with Wifi & Bluetooth state, then make a patch for it.

 

yep it's just a minor, have tried the x0r removal (OWLD) thru clover patch DSDT, it make the airplane indicator to act right but Wifi wouldn't be awake from sleep

 

OK than Thanks so much.

 

btw are you still on El Capitan ?

Share this post


Link to post
Share on other sites

yep it's just a minor, have tried the x0r removal (OWLD) thru clover patch DSDT, it make the airplane indicator to act right but Wifi wouldn't be awake from sleep

 

OK than Thanks so much.

 

btw are you still on El Capitan ?

 

Yes, I'm still on El Capitan, cuz trackpad & keyboard doesn't work well on Sierra atm (driver hasn't been updated yet).

 

So the Xor removal patch made the airplane led worked? If I have free time, I will test it and integrate it to the hotpatch.  ^_^

Share this post


Link to post
Share on other sites

Hello Im happy to see your guide... 

I have an ASUS k501UX  with a skylake i5 cpu and Intel HD graphics 520

 

Does following your tutorial would work for me?

thanks..

Share this post


Link to post
Share on other sites

Hello Im happy to see your guide... 

I have an ASUS k501UX  with a skylake i5 cpu and Intel HD graphics 520

 

Does following your tutorial would work for me?

thanks..

No, because your hardware platform is Skylake, not Broadwell. However you can use my guide as a reference source.

Share this post


Link to post
Share on other sites

No, because your hardware platform is Skylake, not Broadwell. However you can use my guide as a reference source.

thanks... by the way how's your hackintosh as a daily driver machine? is it good as a normal macbook.. do heavy softwares run fine like photoshop, after effects and final cut?

thanks

Share this post


Link to post
Share on other sites

thanks... by the way how's your hackintosh as a daily driver machine? is it good as a normal macbook.. do heavy softwares run fine like photoshop, after effects and final cut?

thanks

I use mac os for coding only, and most of my works are on Windows. As the nvidia card doesn't work on mac os, heavy softwares can't be used.  :no:

Share this post


Link to post
Share on other sites

Hello Im happy to see your guide... good work :thumbsup_anim:


I have an ASUS k751l  with  i7 broadwell u cpu and Intel HD graphics 5500


 


Does following your tutorial would work for me?


thanks..


Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Pro and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Pro, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8700k, 9600k, 9700k, 9900k
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
      There Is No Better Guide Then The One That @glasgood Has Already Written So Just Follow He's Guide For a Perfect Install.     
       
       
      HARDWARE USED
      • Intel I9 9900k 
      • Gigabyte AORUS Z390 PRO
      • Sapphire Pulse Vega 56 ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • Coolermaster MASTERLIQUID ML360R RGB CPU Cooler
      • Samsung 970 EVO 1TB NVMe SSD macOS Mojave
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       
       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
       
       
      CLOVER  FOLDER
      Use this folder with fully patched DSDT
      Z390 Pro DSDT EFI.zip   (Updated 21 July 2019)
       
       
      ADDITIONAL DSDT's  (A big thanks to @MaLd0n for compiling these extra DSDT's)
      If your using a Vega 56/64 or Radion VII then use this DSDT (already installed in my EFI)
      DSDT.VEGA.VII.zip
      If your using a RX Series or Nvidia GPU then use this DSDT
      DSDT.RXxxx.NVIDIA.zip
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      Clover
      Clover Configurator
      Kext Updater
       
       
      OPTIONAL DOWNLOADS
      AirportBrcmFixup.kext    (If your Wifi Card isn't working after installing my EFI then add the AirportBrcmFixup.kext to your clover kext folder and reboot)
      FakeSMC    (Can be used instead of VirtualSMC)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F10)
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Disabled  (Enabled If your using a AMD RX GPU)
       
      • MIT → Advanced Memory Settings  → Extreme Memory Profile (X.M.P) → Enabled  
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Enabled  (can be enabled or disabled, your choice)
      • Chipset → Internal Graphics → Disabled
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Disabled 
       
      • Power → Platform Power Management → Enabled
      • Power → ErP → Enabled  (can be enabled or disabled, your choice)
      • Power → RC6 (Render Standby) → Disabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

       

       

       

       

    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI CLOVER Z390 DESIGNARE.zip
       
      ---OPENCORE FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI OPENCORE Z390 DESIGNARE.zip
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app

      https://www.youtube.com/watch?v=k9wmIfGLe3A
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By glasgood
      GLASGOOD'S
       
      MOJAVE HACKINTOSH GUIDE 
       
       

       
      GIGABYTE AORUS PRO Z390
       
       
       
      CREDITS & THANKS
       
      @MaLd0n
      His help with EFI configuration and DSDT
       
      CLOVER  TEAM
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon Et al
       
      APPLEALC
      Acidanthera, vit9696
       
      VOODOOHDA
      autumnrain, slice2009, zenith432
       
      ESP PRO MOUNTER
      @Micky1979 
       
      HACKINTOOL
      @headkaze
       
      CLOVER CONFIGURATOR
      Mackie100
       
      THEME ENGINE
      Alex Zielenski
       
      INSANELYMAC
      OLARILA
       
      Hackintool Tutorial
      daliansky
       
      Hackintosh Vanilla Desktop Guide
      /r/Hackintosh - corpnewt
       
       
      MONITORCONTROL
      JoniVR & theOneyouseek
       
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
      UPDATES
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
       
      PART LIST
       
      • Intel I7 8700 
      • Gigabyte Z390 AORUS PRO
      • Gigabyte AORUS RADEON RX 580 8GB ( connected to monitor with DisplayPort )
       
      • Corsair Vengeance LPX 16GB ( 2 x 8GB ) 2666MHz – CMK16GX4M2A2666C16  In this build, both memory modules are installed in memory slots DDR4_A1  and DDR4_B1 
       
      • Corsair RM650x 80 Plus Gold Power Supply Unit
      • Corsair H100i V2 AIO Hydro/Water RGB LED CPU Cooler
      • Samsung EVO 500GB SSD (2.5) macOS Mojave
      • Samsung EVO 250 GB SSD (2.5) Windows 10 Pro
      • NZXT H500 Mid Tower ATX Case
       
      • 1st RECOMMENDED WIFI CARD →  ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      OR
      • 2nd RECOMMENDED WIFI CARD → WIFI and Bluetooth with BCM94331CD with PCI-e adapter (but will require AirportBrcmFixup.kext for AirDrop.. )
       
       
       
       
      WORKING
       
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 
      • AirDrop
      • iCloud
      • Hardware Acceleration AMD RX 580 / AMD Vega
      • iMessages
      • Facetime
      • Handoff
      • Netflix on Safari browser
      • Continuity
       
       

       
       

       

       
       
       
       
       
       
      PREAMBLE - BEFORE YOU START 
       
      Here detailed, is all the  steps towards building a successful and stable Aorus Pro Z390 Hackintosh, if you are a first time Hackintosher, this guide will have you quickly up and running with the Aorus Pro Z390 Hackintosh. To rule out potential problems from the go,
      only have the disc that you plan to install macOS Mojave connected to the Aorus Pro, disconnect any other Windows / Linux or data drives, external drives from your Aorus Pro. Windows / Linux and data drives can be connected after successful installation of macOS Mojave
      If you have more than 16 GB of memory, then install macOS Mojave with just 16GB or RAM installed, you can later add any additional memory. Install memory modules in slots DDR4_A1  and DDR4_B1.
       
      This build has a recommended Wi-Fi combo PCI-e card installed in slot PCIEX1_3 with its 9 pin USB cable attached to motherboard header F_USB2.  ( ensure WiFi card is seated properly in PCIe slot and cable is firmly attached to WiFi card and motherboard header F_USB2 ) 
       
      If using the Corsair H100i v2 AIO cooler with USB cable connected to motherboard header F_USB1, you will need to enable hot-patch ( explained in guide ) in config.plist for working sleep, wake from sleep will only work by pressing Power Button.
       
      Install macOS Mojave on its own physical drive, so do not try and install macOS Mojave onto a free partition on a disc that contains Windows.
      Remove any Thunderbolt cards, Thunderbolt card can be reinserted after installation.  Double check your BIOS settings are the same as this guide. 
       
       
       
      Following are unsupported / problematic
       
      • Intel Optane ( if you have this, remove it before installation of macOS Mojave )
       
      • Samsung EVO Plus drives ( ensure you update Plus drive to latest firmware to avoid problems )
       
      • XFX Radeon RX 580
       
      • NVIDIA GTX / RTX not supported in macOS Mojave
       
       
       
      Q - WILL THIS GUIDE WORK WITH MY NON AORUS Z390 PRO MOTHERBOARD ?
      A - Possibly, though you may have to create your own USBPorts fix. 
       
      Q - I notice you have the Aorus Pro Z390 version, will this guide work with Aorus Pro Z390 WiFi version ?
      A - Possibly, but onboard Intel / Intel CNVi WIFII /Bluetooth will not work with macOS and you will have to disable HS14 for Bluetooth to function properly. 
       
      Q - Can I use my AMD Vega Card ?
      A - Yes, AMD Vega card's  will work with this guide, but If you plan to use a Sapphire Pulse Vega 56 then please read @AudioGod ==>post  regarding the Sapphire Pulse 56.
       
       
       
       
      PART 1 - DOWNLOAD 
       
       
      • Update BIOS to version F10 
       
      • CLOVER
       
      •  Aorus Pro Z390 EFI.zip
       
      • Aorus PRo Z390 EFI - THE OC VERSION.zip  <== OC VERSION
       
      • ESP MOUNTER PRO v1.9
       
      • macOS MOJAVE 
       
      • CLOVER CONFIGURATOR
       
      • Hackintool
       
       
      OPTIONAL DOWNLOADS
       
      • Native Display Brightness with MonitorControl

      • ThemeEngine 
       
      • Assets.car 
       
       
      // Not really needed but IF no sound on Wake from Sleep then use SSDT-ALC1220 and CodecCommander
      •   ( Resolves Audio Sound on Wake, place in Clover / ACPI / Patched )
       
      •  ( Resolves Audio Sound on Wake, place in Clover / Kexts / Other )
       
       
       
       
      PART 2 - BIOS SETTINGS (Version F10 )
       
       
      Here is a list of the BIOS settings that I use ( Screenshots in spoiler below )
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Enabled  ( Optionally, can be enabled after macOS is installed, your choice )
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Enabled ( can be enabled or disabled, your choice!)
      • Chipset → Internal Graphics → Disabled
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Disabled 
       
      • Power → Platform Power Management → Disabled ( Optionally, can be enabled after macOS is installed )
      • Power → CEC 2019 Ready → Disabled 
      • Power → ErP → Disabled  (can be enabled or disabled, your choice !)
      • Power → RC6 (Render Standby) → Disabled
       
       
      • MIT → Advanced Memory Settings  → Extreme Memory Profile (X.M.P) → Disabled ( Optionally, can be enabled after macOS is installed, your choice )
      // IF USING  CORSAIR H100i V2 AIO CPU WATER COOLER 
      • MIT → Smart Fan 5 Settings → CPU Fan Control mode → PWM 
       
      • Save & Exit → Save & Exit Setup
       
      SCREEN DUMP SPOILERS
       
       
       
       
       
      PART 3 – CREATE A MOJAVE USB FLASH INSTALLER
       
      Prepare USB Installer for Mojave ( Video below )
       
      • Insert USB drive
      • Launch /Applications/Utilities/Disk Utility
      • Disk Utility → View → Show All Devices
      • On Left-hand panel → External →(Identify your USB device in left hand panel)
      • Click and highlight your USB device in the left-hand panel.
      • Click erase button.
      • Name: USB
      • Format: Mac OS Extended (Journaled )
      • Scheme: GUID Partition Map
      • Click Erase button.
       
      • Place the downloaded MacOS Mojave app into Applications folder.
      • Open Terminal copy and paste:
       
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction && say Mojave Drive Created  • Enter
       
       
       
       
       
       
       
       
       
       
       
      PART 4 – INSTALL CLOVER ON THE MOJAVE USB INSTALLER 
       
      Make Mojave USB flash drive installer bootable.( Video below )
       
      • Launch Clover application, double click.
      • Click Continue → Continue → Continue 
      • Click Change Install Location button.
      • Click Install macOSMojave USB installer → Continue
      • Click Customise button
      • Choose:
      Clover for UEFI booting only Install Clover in the ESP Themes UEFI Drivers • Click Install button
      • Installation Complete!
       
      Video:
       
       
       
       
       
       
      PART 5 – CUSTOMIZE MOJAVE USB INSTALLER FOR AORUS Z390 PRO
       
      Replace Clover EFI folder with PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip  Aorus Pro Z390 EFI.zip   ( Video below ) 
       
      • Install ESP Mounter Pro v1.9
      • Using ESP Mounter Pro, Mount ESP on disk2s1 ( Your disk name may be different )
       

       

       
       
       
      • Open mounted EFI partition found on desktop
      • Copy all the contents from Aorus 390 Pro EFI folder
      • Replace USB EFI folder with all the contents inside the Aorus 390 Pro EFI folder.
       
       

       
       
       
       
       
       
       
      PART 6 – INSTALL MAC OS MOJAVE ON INTERNAL DRIVE
       
      INSTALL NOTE
       
      ENSURE BIOS: Above 4G Decoding is set to Disabled 
      if Above 4G decoding is set to enabled then macOS Mojave install will freeze at 2 mins remaining and will not shut down properly!!!!
       
      Please be patient during install, so when install gets to 2 or 3 mins remaining then it may take extra time. Be ready to boot from UEFI USB installer by pressing F12 when install initiates restarts. 

      • INSERT USB INSTALLER INTO THE USB 2.0 PORT  
       
       
       Here is a walkthrough of the full process using the macOS Mojave USB Installer on the Aorus Z390 Pro. 
       
       
       
       
      • Power on PC and press F12• Choose bootable USB drive from boot menu.
       
       
       
      • Install macOS Mojave to internal solid state or hard drive.
       
       
       
      When system returns to the Clover boot menu choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      At next restart, press F12 and boot from external UEFI USB device and choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      Proceed with macOS Mojave install
       
       
      macOS Mojave is now installed, but it can only boot at this moment thanks to FakeSMC and Clover on the Mojave USB flash drive installer.
       

       
       
       
       
       
       
      PART 7 – MAKE AORUS Z390 PRO INTERNAL DRIVE BOOTABLE
       
      Make internal drive bootable ( Video below )
       
      So far, the Aorus Pro can only boot the internal system drive with the aid of the Mojave USB Installer.
      To boot from the internal system drive without the installer: 
       
      Download and install Clover with RC Scripts on target volume.  
      Copy the EFI folder from inside Aorus Pro Z390 EFI.zip  folder and paste it inside the the System Drive EFI partition.         
       

       
       
       
      • Remove USB Mojave installer and shut down and restart.
       
      Aorus Hackintosh should now be able to boot to macOS Mojave, Done, well almost ! 
       
       
       
       
       
      PART 8 – ENABLE IMESSAGES & FACETIME 
       
       
      // UPDATE 21st MAY 2019
       
      Possibly Clover Configurator now automatically populates correct values for working iMessages when you select an SMBIOS.  
       
       

       
       
      After selecting SMBIOS, example iMac19,1 for Aorus Pro with RX580 ( image above ) then go to Apple and ensure you have the "serial number is not valid " message. Done!
       
      If you still have problems connecting to iMessage, test and ensure that AirDrop is working, then follow instructions inside spoiler. 

       
       
       
       
       
       
       
       
       
       
      PART 9 – ENABLE TRIM for Solid State Flash Drives
       
      Open Terminal and enter the following command:
      sudo trimforce enable  
       
       
       
       
       
      PART 10 – FRAMEBUFFERS  FOR RADEON AMD RX580, VEGA CARD's
       
       
       
       
       
      DEFAULT USB FIX –  USB PORTS CONFIGURATION 
       
       

       

       
      If you have USBC on Computer Chassis / Case, then SS01 and SS02 is mapped to that USB C port 
       

       
       
       
       
       
       
      ------------    GUIDE FINISHED YOU SHOULD NOW HAVE WORKING AORUS Z390 PRO HACKINTOSH  WITH SSDT USB FIX   ------------
       
       
       
       
       
       
       
       
       
       
      OPTIONAL: Set Wi-Fi Country Code
       
       
       
       
       
       
      OPTIONAL: System Information - PCI
       
       
       
       
       
       
       
      External USB Storage:  Fix "disk did not eject properly" message upon wake from sleep
       
       
       
       
       
       
       
      OPTIONAL:  Native Display Brightness - with MonitorControl

       
       
       
       
       
       
      OPTIONAL:  Dual Boot macOS Mojave & Windows 10 
       
       
       
       
       
       
       
       
      OPTIONAL:  Replace the default "About This Mac" Apple Logo with RED AORUS APPLE
       
       

       
       
       
       
       

      OPTIONAL USB PORTS FIX  – Create your own SSDT or USBPorts.kext
       
       
       
       
       
      FRAMEBUFFER PATCHING  – For working Intel UHD 630 Graphics, working HDMI Port, working HDMI Audio on Aorus Z390 Pro  NOT REQUIRED AS GUIDE IS USING SMBIOS FOR IMAC PRO 1,1
       


       
       
       
       
       
       
      FINAL CUT PRO  – Configuration for AMD RX5xx  NOT REQUIRED AS GUIDE IS USING SMBIOS FOR IMAC PRO 1,1 
       
       
       
       
      AORUS PRO Z390 WIFI version with Intel CNVi  – Disable Bluetooth on HS14
       
      Resolve bluetooth issue  reported by @eSaF 
       
       
       
       
       
       
      CLOVER  – Updating / Upgrade Clover boot loader  (If hack is stable, don't update unless you have problems)
       
       
       
       
       
       
      SLEEP  – Sleep and Automatic Sleep

       
       
       
       
       
       
       
       
      SLEEP  – Resolving Instant Wake ( Corsair H100i v2 AIO )
       
       
       
       
       
       
       
       
      WIFI  – Clover Hotpatch PXSX to ARPT
       
       
       
       
       
       
       
       
       
       
       
      RECOMMENDED READING  – Excellent Hackintosh Vanilla guide created by CorpNewt with in depth tutorial on Clover.  
       
      https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/config.plist-per-hardware/coffee-lake
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       

       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      EFI NON DSDT SMBIOS iMac Pro 1,1 Clover v2.5k r5018 
      Aorus Pro Z390 EFI - RX580.zip   OR  Aorus Pro Z390 EFI - Vega-56.zip 
       
      EFI FOR SMBIOS iMac 19,1 for use with GPU & IGPU enabled in BIOS
      PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip
      POST-INSTALL Aorus Pro Z390 EFI - RX580.zip ( Has OsxAptioFix2Drv-free2000.efi ==> recommended reading before use )
       
      EFI FOR INTEL UHD 630 SMBIOS iMAC 18,1  
       Aorus Pro Z390 EFI - Intel UHD630.zip( Has OsxAptioFix2Drv-free2000.efi ==> recommended reading before use )
       
       
    • By Pedro Diniz
      Hello Friends, how are ya?

      Could you help me with a problem?

      I followed some guides like: https://www.insanelymac.com/forum/topic ... coffeelake -dsdt /

      and the installation of high Sierra 10.13.6 (17G8030) and nvidia webdrivers (correspondent to OS version) went smoothly, the problem starts when I try to boot the GPU.

      Hardware:
      MOBO: Aorus B360M gaming 3 (rev.1)
      CPU: i5 8400
      GPU: GTX 1060 OC Galax redblack

      BIOS:
      Fast boot - disabled
      windows 8/10 features - other os
      lan pxe - disabled
      storage boot option - UEFI
      other pci devices - UEFI
       
      Initial display output - PCie 1 slot
      Intel's Platform Trust Technology (PTT) - disabled
      sata mode selection - AHCI
      XHCI hand off - enabled
      VT-d - disabled
      internal graphics - auto


      The problem is:
      I can log into the system normally without using my nvidia GPU but when I boot the system with the flags for webdrivers to work I fall into the login screen but it keeps flashing, I can see the mouse and I can move it but the screen flashes and the following error appears when the screen goes "black": IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0. I searched for this error on the internet and tried to solve but to no avail so far.

      If someone can help me I would be extremely grateful! thanks in advance!

      Clover file attached.
      CLOVER.zip
    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?f=45&t=9172
       
      ---USB---
      https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
×